Develop Bugs

Help with ROM update please.

Hi need some expert help please.
Trying to update my Diamond and first i updated Hard-SPL-Diamond-OliNex 1.40 i think it says.
Then i updated with: RUU_Diamond_HTC_WWE_1.37.871.3_Radio_Signed_Diamond_52.26a.25.09_1.00.25.03_Ship.exe
So everythings seems fine and its installing all the programs and so...
BUT the touch screen is not working very good, its like freezing up all the time and some time is just hanging so i haft to boot the device. But when its not possible to use the touch function the "button" is working. Hope u understand what i mean? Somebody know what to do?
Im all new with this kind of stuff pleae help me!
Best regards Micke

y dont u d/l e 1.93 cook rom it more faster... but need to use unsigned SPL
The Signed HardSPL only allowed you to flash ROMs that have been signed by Olipro and listed in his thread in the sticky

OK.. like i sayed im new. So where do i get a cooked ROM and where a Unsign SPL ?
And does anybody know if there is a Swedish ROM out?
Thanks alot!

This one is unsigned SPL (Hard-SPL - Developer Edition)
http://forum.xda-developers.com/showthread.php?t=400950

harky please read before you post... 1.40 is unsigned hard-SPL..
if you're having trouble with device after flashing, try a couple things:
1) hard reset
2) if it still doesn't work, reflash that ROM or another
3) still giving you problems, then i think you should try one of the other Hard-SPLs (look for the one that is from your original SPL version)

he is asking for unsigned one also (i nv see wrong @ his post)

read again.. he already has 1.40 olinex (which is unsigned)

Hard SPL

Hi,
I was about to flash OliNex Hard SPL but stopped just before clicking "Update". I noticed the before and after version numbers were in reverse i.e. 1.37 before and 1.30 after. Is that correct?
Also, I was thinking of using the Dutty rom, would that be compatible with OliNex Hard SPL
Thanks

Wow!!! not a single reply. Come on my fellow HTC'ians...somebody must now the answer.

Diamond HardSPL OLINex v1.40

Everything in the Wiki http://wiki.xda-developers.com/index.php?pagename=Diamond_ExtractedRadioRoms tells me to put : Diamond HardSPL OLINex v1.40 to upgrade my radio on the diamond.
I've gone through every thread i can find mentioning v1.40 but couldn't find it. I've managed to find every other 1.23, 1.24, 1.34 http://forum.xda-developers.com/showthread.php?t=415191 and 1.38 http://forum.xda-developers.com/showthread.php?t=400402
Can anybody point me towards 1.40 ? please don't answer telling me to search the forum as i'm tired of doing it for past 3 days. Just give me the link to the file please

hope this helps
. Download a Hard-SPL from the forums here
Hard-SPL 1.40 Olinex SIGNED
Hard-SPL 1.40 Olinex Developer Edition-unsigned (flash at your own risk)
Jockyw2001's 1.23, 1.24, 1.34 Hard-SPL (if you're having trouble with the other hard-spl's)
here is a link to that page
http://modmydiamond.info/index.php?option=com_content&task=view&id=22&Itemid=26

I've seen this and it again takes me to this URL http://forum.xda-developers.com/showthread.php?t=400402
This page has 2 files :
Hard-SPL-Diamond-OliNex.zip (1.92 MB, 13583 views)
HardSPL_OliNex138_Signed.zip (137.4 KB, 2082 views)
Now none of the above says 1.40, so is it the 1st one ?

hi
sorry but what's the difference between the Hard-SPL 1.40 Olinex SIGNED and the Jockyw2001's 1.23, 1.24, 1.34 Hard-SPL in general?
sorry to get on your thread ninthsense as i don't mean to go off topic

ninthsense said:
I've seen this and it again takes me to this URL http://forum.xda-developers.com/showthread.php?t=400402
This page has 2 files :
Hard-SPL-Diamond-OliNex.zip (1.92 MB, 13583 views)
HardSPL_OliNex138_Signed.zip (137.4 KB, 2082 views)
Now none of the above says 1.40, so is it the 1st one ?
Click to expand...
Click to collapse
Yes, 1.40 is the first one. I have installed it and then loaded Dutty's ROMs and it all works fine.

andy2111 said:
Yes, 1.40 is the first one. I have installed it and then loaded Dutty's ROMs and it all works fine.
Click to expand...
Click to collapse
Thanks a lot Andy . I'll givr this a try now

HELP
When I Flash In D 1st One... It Flashes Olinex V1.30 On My 1.93.720.2 Rom.... Please Help N Tell Y??!
I Hav Olinex V1.40 Installed But Is Unassigned....
Wat Difference Does A Signed N Unassigned Have??
Is It Just Like Legal N Illegal Thing..??! Or Sum Performance Difference Or Wat..?!
N Its Fine Using D Unassigned One...??
Ne1's Help Would B Highly Appritiated..... Thanks

signed / unsigned
with Hard-SPL 1.40 Olinex Developer Edition-unsigned you can flash signed and unsigned Rom's
with Hard-SPL 1.40 Olinex SIGNED you can only flash signed Rom's

sparkienl said:
with Hard-SPL 1.40 Olinex Developer Edition-unsigned you can flash signed and unsigned Rom's
with Hard-SPL 1.40 Olinex SIGNED you can only flash signed Rom's
Click to expand...
Click to collapse
1)how do we get to knw tht dis 1 dat's flashin up is signed or unsigned?! or how do we check...?!
2)whn i do volume down n soft reset in dere its showin me 1.40 olinex.. so it means it signed or wat?? or plz answer d 1st question

QUOTE=rorydaredkign;2313205]It means you can only install signed ROM's, i.e ones form HTC, Carriers, or ones signed by Olinex and the other people in Elite Team. And they won't sign ranodm crap, so gives you safety- if it's signed, it's ok to flash it.
Unsigned means you can install any random ROM you like, cook your own easily and install it without any fuss.[/QUOTE]
Here is the answer on your question

hi
i can´t change from 1.24 to 1.40
the update is processing and the device is restaring but it shows always 1.24
please help

You probably have to use SSPL to install another SPL.
See here for more details: http://forum.xda-developers.com/showthread.php?t=416211

thx - it worked
http://forum.xda-developers.com/showpost.php?p=2412201&postcount=1
i made it with this tool: diamond-sspl.bat from the 1.23 & 1.24 package and after black screen on my diamont, i started ruu from 1.40

I am happy for you that it worked.
Have fun

Update spl question

when i`m trying to put HardSPL on my touch diamond ... installer will hardSPL to version 1.40.OliNex , but my version is 1.93.479.3 ... so what to do, i will downgrade it or what ?
please someone tell me what to do .

pufosme said:
when i`m trying to put HardSPL on my touch diamond ... installer will hardSPL to version 1.40.OliNex , but my version is 1.93.479.3 ... so what to do, i will downgrade it or what ?
please someone tell me what to do .
Click to expand...
Click to collapse
..just click next! 1.93.xx is just the "version" of your current rom;

signed or unsigned ???
and another important question for me ... what HardSPL should i put ... signed or unsigned ... and what`s the difference between them ?
if i put hardspl unsigned, will i ever be able put a signed version ?
thanks for reply ...

pufosme said:
and another important question for me ... what HardSPL should i put ... signed or unsigned ... and what`s the difference between them ?
if i put hardspl unsigned, will i ever be able put a signed version ?
thanks for reply ...
Click to expand...
Click to collapse
..if you use the search function I am sure you'll find the answer;

unsigned
i;ve installed hardspl unsigned 1.40 ... and the widows act like a hardreset ... (not windows .. the device) and now it`s reinstalling windows ... is it normal ?
will all customizations ...
and now am i able to install radio and new rom ?
thanks a lot ...

pufosme said:
i;ve installed hardspl unsigned 1.40 ... and the widows act like a hardreset ... (not windows .. the device) and now it`s reinstalling windows ... is it normal ?
will all customizations ...
and now am i able to install radio and new rom ?
thanks a lot ...
Click to expand...
Click to collapse
...its a normal behavior!
You can install all original htc radios; for the ported radios you need the sec. unlocker;

radios
i`ve read this article : http://forum.xda-developers.com/showthread.php?t=416211 ...
and there is said that 1.00.25.05 has been reported to have the best results and power management, plus it fixes the device getting hot issue ...
is this valid ? are there any new "stable" radios ? (i have unsigned hardspl 1.40)

pufosme said:
i`ve read this article : http://forum.xda-developers.com/showthread.php?t=416211 ...
and there is said that 1.00.25.05 has been reported to have the best results and power management, plus it fixes the device getting hot issue ...
is this valid ? are there any new "stable" radios ? (i have unsigned hardspl 1.40)
Click to expand...
Click to collapse
..stable are all radios; a few need more battary, a few have a better signal.I would say you try it for yourself.

ROM v3.3 by TOM
did someone updated http://forum.xda-developers.com/showthread.php?t=413820 with HARDSPL unsigned 1.40 olinex or something like this...
plss ... it rom DIAMOND TEAM v3.3

Problem with FLASHING my HTC TOUCH DIAMOND

Hi at all,
i just tried to flash my XDA Diamond with following ROM:
SUN Y 1.2 WM 6.1 - Manila 2.5.1921 by Kisja
Inside the extracted file a find the .NBH file, CustomRUU and PagePool_Changer.
So i don't know what to do with the PagePool_Changer, think i don't need it.
I tried to flash my XDA with the CustomRUU, when i open this, a PDA Update Utility vers. 3.27.4.3 will be started. I followed all the steps, then it started to flash, but it stays at 0%. Then it tells me to recover..so i did.
Then i tried it with the Signed and Unsigned HardSPL-Diamond-Olinex...same thing -.-
So i flashed SPL-1.30.OliNex on my phone, checked if it was on my phone and it is.
After that, i tried all the things from above again but it didn't help.
So what do i do wrong? It can't be so difficult to flash a ROM can it?
Thx 4 ur help
PS: If u wanna help me quiet fast, my icq number: 495445657..thx^^

i try this rom and its running with no probleme

Inv1ctus said:
Hi at all,
i just tried to flash my XDA Diamond with following ROM:
SUN Y 1.2 WM 6.1 - Manila 2.5.1921 by Kisja
Inside the extracted file a find the .NBH file, CustomRUU and PagePool_Changer.
So i don't know what to do with the PagePool_Changer, think i don't need it.
I tried to flash my XDA with the CustomRUU, when i open this, a PDA Update Utility vers. 3.27.4.3 will be started. I followed all the steps, then it started to flash, but it stays at 0%. Then it tells me to recover..so i did.
Then i tried it with the Signed and Unsigned HardSPL-Diamond-Olinex...same thing -.-
So i flashed SPL-1.30.OliNex on my phone, checked if it was on my phone and it is.
After that, i tried all the things from above again but it didn't help.
So what do i do wrong? It can't be so difficult to flash a ROM can it?
Thx 4 ur help
PS: If u wanna help me quiet fast, my icq number: 495445657..thx^^
Click to expand...
Click to collapse
Choose a different HSPL, go for 1.40 or 1.93. I had the same problem.

Could you please tell me exactly what you have done?
Every step and which SPLs you used?
Did you only use the CustomRUU from the download file?
That would be very nice
Otherwise i am about to desperate
sraaj: okay, i am going to try it right now^^

I could write my version, but if you look at sticky number 3, that has everything. I followed it and it worked just fine....
http://forum.xda-developers.com/showthread.php?t=416211
just that 1.30 did not work, so I used 1.40 which is in the post above... also i hope its not CDMA, since the above is for GSM models..

Could anyone give me a link to download HSPl 1.40 or 1.93 please?
I seem to be too stupid to find another one than 1.3
Edit:
Well, i now found a 1.93 and a 1.40 but they seem to be the same as my 1.3
Does anyone have a link with the version i need?
2. Edit:
I found an 1.40 .... finally
so now i try it again

It is updating right now, with HSPL 1.40..oh guys i hope so much that it works in the end

.....And did it work?

So now it's done.
It works
The Problem was that i tried to flash with HSPL 1.30 and not with 1.40
With 1.40 it worked fine
Big thanks for your help guys

Inv1ctus said:
So now it's done.
It works
The Problem was that i tried to flash with HSPL 1.30 and not with 1.40
With 1.40 it worked fine
Big thanks for your help guys
Click to expand...
Click to collapse
Congratulations
Yes, that was precisely my problem. with 1.40 everything works.
I upgraded to 1.93 but dont know why, just cuz it looks to be a higher version...
So now you can spread the knowledge, and keep helping our junior members...