Sorry about the nube question but i'v searched the forums for this but no luck
The problem is every time the screen e turned off ex: by and incoming call or by the power button on top after a few seconds it freezes can't trun the screeen back on.
i have install the flowing components:
ROM: Min.74 Y2 Sense 2.2 Full WWE
Radio: 1.03.25.18
HardSPL: SPL-1.40.OliNex
Thanks in advance for any help
Hyperbyte.
hyperbyte2 said:
Sorry about the nube question but i'v searched the forums for this but no luck
The problem is every time the screen e turned off ex: by and incoming call or by the power button on top after a few seconds it freezes can't trun the screeen back on.
i have install the flowing components:
ROM: Min.74 Y2 Sense 2.2 Full WWE
Radio: 1.03.25.18
HardSPL: SPL-1.40.OliNex
Thanks in advance for any help
Hyperbyte.
Click to expand...
Click to collapse
press reset+vol down+center button. On the screen will be show 3 option; press vol down..wait few second...and at the end press vol up to reboot..
if there are other problems, you have to install an official rom, then re-install your cooked rom (in this case Min.74 Y2 Sense 2.2 Full WWE).
bye
(sorry for english)
Thanks so much for your replay.
hyperbyte2 said:
Thanks so much for your replay.
Click to expand...
Click to collapse
have you done MTTY before flashing if not, MTTY is available as a sticky thread in this forum, download and reflash.
varadha_Balaji said:
have you done MTTY before flashing if not, MTTY is available as a sticky thread in this forum, download and reflash.
Click to expand...
Click to collapse
No i haven't use MTTY
I'l try it later this night.
Thanks for you help
hyperbyte2.
varadha_Balaji said:
have you done MTTY before flashing if not, MTTY is available as a sticky thread in this forum, download and reflash.
Click to expand...
Click to collapse
MTTY didn't solved the problem, the phone still hangs up on screen blank
I'll try to install an official rom.
Related
hello
i've upgraded my trinity p3600.
First of all i loaded OLIPRO 1.20 into my pda.
After installed (100% all ok)...i put lasagna rom.
It was loaded 100% and the first screen appeared ! ok i said..but...there was a little problem with the today !
was TOTALLY blank! white ! the only thing i see is UPPER bar and bottom bar.
But the device work! clock calculator , menu , telephone!
SO? i've installed another rom , maybe was LASAGNA!
so i've installed BLACK and BLUROM...
THE SAME!
ALWAYS TODAY WHITE
what i've to do?
One solution...
sozi said:
hello
i've upgraded my trinity p3600.
First of all i loaded OLIPRO 1.20 into my pda.
After installed (100% all ok)...i put lasagna rom.
It was loaded 100% and the first screen appeared ! ok i said..but...there was a little problem with the today !
was TOTALLY blank! white ! the only thing i see is UPPER bar and bottom bar.
But the device work! clock calculator , menu , telephone!
SO? i've installed another rom , maybe was LASAGNA!
so i've installed BLACK and BLUROM...
THE SAME!
ALWAYS TODAY WHITE
what i've to do?
Click to expand...
Click to collapse
... is to do a hard reset, re-flash the original WM5 ROM and start from the beginning.
Before flashing to a new WM6 ROM, try installing OLIPRO 1.30 instead.
I believe this should help.
Cheers!
hoja67
sozi said:
hello
i've upgraded my trinity p3600.
First of all i loaded OLIPRO 1.20 into my pda.
After installed (100% all ok)...i put lasagna rom.
It was loaded 100% and the first screen appeared ! ok i said..but...there was a little problem with the today !
was TOTALLY blank! white ! the only thing i see is UPPER bar and bottom bar.
But the device work! clock calculator , menu , telephone!
SO? i've installed another rom , maybe was LASAGNA!
so i've installed BLACK and BLUROM...
THE SAME!
ALWAYS TODAY WHITE
what i've to do?
Click to expand...
Click to collapse
Just a little search...
http://forum.xda-developers.com/showthread.php?t=311180&highlight=white+screen
They said,it can be because of olipro 1.2
But with olipro 1.3 you can not flash radio, and some roms..
I suggest use DES crashproof Hard-spl. You will find it in the thread...
ok ! THANK YOU!!! you're very very kind!
but now...how to hard reset ? ...how to install my original rom ?TELL me!
in the box of my mobilephone i didn't find nothing!
Do i download it from the website of htc?
Seek and yee shall find!
sozi said:
ok ! THANK YOU!!! you're very very kind!
but now...how to hard reset ? ...how to install my original rom ?TELL me!
in the box of my mobilephone i didn't find nothing!
Do i download it from the website of htc?
Click to expand...
Click to collapse
The bible:
http://www.trinityguides.info/
Cheers!
hoja67
hi guys,
i have hard spl my phone for the first time. i realised as soon as the phone restarted the screen was a bit different, kinda fuzzy or jumpy. did it happen to anybody else or is just me encountering it for the first time.
thanks in advance....
Read This...
Here...
which HARDSPL did you load?
Hello, Before opening this thread you should have used the search button.
Now answer to your question. Yes that is normal that your screen will flicker because the hard spl version you have installed is not compatible with your device. Please install the 1.37 version and if you still have problems then install the 1.93 version. Here is the link http://forum.xda-developers.com/showpost.php?p=2312363&postcount=2
thanks alot sumi... and windowz.. i just used olinex 1.37 and its sorted.
thanks alot guys. cheeers
hi,
on my trinity woks a bepe 0,79 rom. but now i wanted to flash to lalle 6.1.
so i took the trinity to the station an push the two buttons (camera and on). now the screen chanced to the bootloader screen. but the usb connection break and now the trinity doesn`t load the bepe. he only show the bootsreen. hardreset and battery off doesn`t help.
what can i do???
please help
nnnnudel said:
hi,
on my trinity woks a bepe 0,79 rom. but now i wanted to flash to lalle 6.1.
so i took the trinity to the station an push the two buttons (camera and on). now the screen chanced to the bootloader screen. but the usb connection break and now the trinity doesn`t load the bepe. he only show the bootsreen. hardreset and battery off doesn`t help.
what can i do???
please help
Click to expand...
Click to collapse
Have you READ the Wiki?
You´ll find your answers there
Good luck
thanks.
i will take a look now
nnnnudel said:
thanks.
i will take a look now
Click to expand...
Click to collapse
ok, i think i must connect with mtty. is this right? but which command is the right??
resetdevice or which one?
my englisch is not the best and i don`t know about this commands. can you give me the right comand, please?
i have the olipro spl 1.3 and bepe 0,79 rom.
hi all i have a dumb question..
today i flashed my hermes with PV DVH rom (but i reflashed coz my battery was draining so fast), i flashed madkoe schism rom.. but when i finished flashing on the first splash screen appears half of the PV DVH and half of SCHISM :
please any suggestions..
Many thanks
Hi, try flashing only the splash screen, search the forum for "splash screen flash" or "boot screen flash", there is a tool that makes images in a suitable format for that purpose, then use the RUU_Wrapper from the ROM you installed. If you have any problems I'll find the thread
P.S. There are no dumb questions
thanks
hi thanks for the reply i will try to only flash the splash screen.. or i can just repair it with the advance config tool?
Sorry for the late answer. It depends on which screen you want to change. The first one you see is changed by flashing. The second one - you can change it with the advanced configuration tool
I was setup a new w6.5 rom and then my p3700 goes to frozen. I can't start os, can't connect to pc via usb. What can I do? Please help me
Soory my bad english...
dueto said:
I was setup a new w6.5 rom and then my p3700 goes to frozen. I can't start os, can't connect to pc via usb. What can I do? Please help me
Soory my bad english...
Click to expand...
Click to collapse
Press down volume down arrow and press on start at the same time....phone will start in bootloader mode...plug the USB and flash the ROM again...
Thanks a lot its works... my p3700 came back
dueto said:
Thanks a lot its works... my p3700 came back
Click to expand...
Click to collapse
Bravo!! good work!! Enjoy XDA!