Sorry I am a Noob, but i have been reading and now at a loss and would like some help.
I recently Bought a Second hand HTC Touch P3700, now lucky for me the previous owner put on a boot loader (HardSPL(1.40) oilnex, Now i found a stanard rom wm6.5.3 but it fails cos the CID don't match (mine is Diam200) and the rom i want is Diam100000 (t-mobile), now i got the NBHUtil tool and tried to change it, but for some reason NBHUtil.exe Ver 0.92 will not work on windows 7, (never thought i would want XP back !!!) unfortunatly my old PC is in another country right now!!!
Can anyone suggest a simple way i can get around this, i even got Rom editor, but i have no idea how to use it to alter the CID?? HELP PLEASE Thanks in advance
Related
Hello
I've searched on this forum and can't find the answer to my specific question.
I upgraded a while back to MrClean AKU 2.3 and now I need to downgrade because the unit needs to be sent back under warranty due to screen alignment issues.
So I unpacked the i-mate WWE ROM, and replaced the ROMUpdateUtility from that with the ROMUpdateUtility_Wizard_NoID.exe, which I downloaded from the XDA FTP site. (This is because using the standard one supplied gives a ROM upgrade error 296: UPGRADE ONLY error.)
As far as I can make out, the ROMUpdateUtility_Wizard_NoID.exe is just patched to not validate the current version when upgrading.
"Brilliant, this should work", I think.
But I get the following error:
"ERROR [238]: FILE READ... the update utility cannot open the requested file. Please check your update utility"
(see here http://static.flickr.com/111/306871020_8aa37f337e_o.gif)
Please help, anyone, I am coming up to the end of my warranty period and reeeeally want to get this crappy broken screen alignment problem sorted!
Thanks in advance
* bump *
Hope it's not considered rude to bump here, just would love to solve this problem as tis driving me a bit mad
Many thanks in advance
msmobiles.com:
This error message may appear when, for some unknown reason, the ROM image on the phone is corrupt. Download the whole RUU and try again.
Click to expand...
Click to collapse
Hey
Thanks for the tip. You were right, it must have been a corrupt .nbf file.
I tried to downgrade and the progress bar started and finished and all seemed to go well.
But when I boot up again I get the white MrClean ROM splash screen still!
Is it possible the update was done but the splash screen was not replaced?
Or perhaps the update wasn't actually done? Which version number do I look for? I used the .nbf file packaged in with the imate ROM K-JAM_WWE_1010903_106_10110_ship.exe
Please help!
try using this rom to downgrade with... after that you should be able to upgrade to any official rom. Make sure that you pick an official one as the above rom downgrades the ipl/spl as well.
ohh... and make sure that you restore the CID lock as well, they might be get rather cranky otherwise...
Good luck
Hello
Thank you so much for the reply, I really appreciate the advice. I would feel so out-there-on-my-own without it! I bought the imate off contract from expansys and it was really expensive and so really don't want it to end up a brick as I can't afford another right now!
I successfully downgraded to that QTEK custom ROM.
But now when I upgrade again to K-JAM_WWE_216901_2169101_020710_ship (latest).exe from that QTEK ROM, it doesn't work! Upgrade error again [ERROR 296]
Here are the screens I get:
http://static.flickr.com/114/309671629_756dc86b9d_o.gif
http://static.flickr.com/107/309671652_327adfb432_o.gif
Thanks again
Mat
Just to clarify... is the phone CID-locked? You might also want to try flashing it with the K-JAM_WWE_1010903_106_10110_ship.exe ROM before upgrading it... you can also try putting the phone in bootloader mode, press and keep pressed both the keys on the right side and then insert the pen in the resetbutton, before trying the upgrade...
EDIT: msmobiles.com shows the following regarding the particular error:
ERROR [296] : UPGRADE ONLY
One of these error messages will appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device. Make sure you use the appropriate RUU tool to upgrade.
Click to expand...
Click to collapse
Hey Nomad
Thanks again for the advice. This is all really really helpful. Going to try what you suggested a bit later.
I think I CID unlocked the phone - to be honest it was a while ago and I just remember blindly following someone's instructions (I was at a point of desperation at the time for another reason!)
Either way, I am pretty sure it would have to have been CID unlocked because I flashed the ROM from the imate default one to the MrClean one.
I did some initial looking around about CID relocking the device but still not sure how. Does the lockiwiz give the option of locking the CID as well as unlocking it?
Thanks!
Mat
I flashed from the QTEK custom ROM to the K-JAM_WWE_1010903_106_10110_ship.exe after doing that special reset whilst in the bootloader. This flash upgrade worked but again it didn't remove the splash screen from the QTEK custom ROM.
But now whenever I try to flash to the latest imate ROM K-JAM_WWE_216901_2169101_020710_ship.exe using the default RUU I get ERROR [296] UPGRADE ONLY.
And when I try to flash to the same ROM using the noID RUU I get ERROR [238]: FILE READ ERROR.
(On that last one, I have re-downloaded both the noID RUU and the extractable archive K-JAM_WWE_216901_2169101_020710_ship.exe from the XDA FTP.
So, I'm still unable to get my ROM to the imate version! Many thanks for your help!
Mat
Hi ,
I´m going to try and update my HTC s620 to WM6 from Tmobile,
but,
Where can i download the HTC ROM iff i would like to revert
meaning going back to wm5?
and is this possible?
cause i allso want to be sure that when htc comes out with there rom update i can update it to theres,
cause i think the tmobile rom has a lot of screens with there logo on?
and i dont like that
I have the WM5 HTC Rom (RUU_Excalibur_HTC_WWE_1.11.405.4_4.1.13.28_02.63.90_Ship.exe). It is over 37MB in size, I don't know how I could get it to you.
http://rapidshare.com/users/7UE30C
click on the folder button
super!
thanks man!
Do you also know iff it is possible to downgrade from wm6 to wm5, in case i dont like it, or like i mentioned above?
U have to have you phone CID unlocked. then you can go WM5<>WM6 no problem. ( take it back, actually i am not sure. If you going to play only with t-mobile ROM's, then CID unlocking might not be needed).
uwashock said:
U have to have you phone CID unlocked. then you can go WM5<>WM6 no problem. ( take it back, actually i am not sure. If you going to play only with t-mobile ROM's, then CID unlocking might not be needed).
Click to expand...
Click to collapse
The phone i have is from HTC it self, not Tmob.
So i know it has no simlock, i guess no cid lock too, but i dont understand cid lock will lock for that one here some where
Did anyone try to update/downgrade it allready?
I did. I have the T-Mobile Dash. It's not CID unlocked.
I downloaded WM6 and found that I couldn't use Missing Sync or send email, so I went online and downloaded the WM5 Rom from another forum (Howard I believe but I might be wrong).
It works just fine, I had no problems going back.
then ill try that, cause htc said it would not work, thanks
I tried using that Rom above but it gave me an error "Invalid Vendor ID" or something like that. I already CID unlocked (thats how I upgraded from ROgers WM 5 to Tmobile WM6). Can anyone tell me what I' doing wrong?
where can I find the tmobile wm5? i upgraded with their wm6 and would like to go back.
Hello and good day to you all.
I have a bit of a problem and i was wondering is someone could help.
Recently flashed my phone using schaaps 3.54 also did the hard spl now says
ipl 1.04
spl 2.10.olipro
Very happy with the outcome but the camera stopped working (Twice this has happened now on second phone), so i need to send the phone back to orange. Everytime i try to go back to the orginal rom (downloaded from the orange website), the phone goes into bootloader and then then nothing PC says it has lost connection with the phone.
Guess what im asking is how do i put the original rom back on, or cant I. have searched the forum but either im blind or i didnt use the correct search words. Any help would be very greatly recieved.
Thank you
Andy
andyd358 said:
Hello and good day to you all.
I have a bit of a problem and i was wondering is someone could help.
Recently flashed my phone using schaaps 3.54 also did the hard spl now says
ipl 1.04
spl 2.10.olipro
Very happy with the outcome but the camera stopped working (Twice this has happened now on second phone), so i need to send the phone back to orange. Everytime i try to go back to the orginal rom (downloaded from the orange website), the phone goes into bootloader and then then nothing PC says it has lost connection with the phone.
Guess what im asking is how do i put the original rom back on, or cant I. have searched the forum but either im blind or i didnt use the correct search words. Any help would be very greatly recieved.
Thank you
Andy
Click to expand...
Click to collapse
www.mrvanx.org - you'll be wanting gthe WM5 downgrade guide.
Forgive me for being stupid but when it says i need a rom does this have to be the original one that i use with it
how do i find the nbh file the rom i have downloaded is an exe file
lol ignore last post just worked that out right click the exe file and extract lol
Thanks for the link got it sorted now and have learnt something this afternoon. cheers
Rang orange told them camera is black and they are replacing phone tomrrow morning
did yhou downgrade the hard spl too?
lol dont ask me complicated questions lol how do i do that?
im currently updating it from the orange website with there update hopefully that will do it?
Hello i have a HTC orange Touch Diamond and i want to update the ROM as it is terrible. I am not that technical. can someone please explain what i need to do from scratch.
Thank you
I suggest your search the forum...
hello newbie
yes use the search button...it works really well
You first need to flash your diamond with one of the hard spl on this site and after you've done that you can take your pick from any of the roms on here
sorry guys i did look just didnt understand much. I am trying to use Hard SPL just cant get it to work.
same here
I have an orange htc Diamond and would really apreciate which files wouldwork. Everything I have tried stay's at Zero and ends up in an error.
Any help would be greatly ppreciated
root directory
to use hard spl i have to put a file in the root directory! but what is the root directory?
Hi James, your failing at 0% most likely because the SPL your using will not allow unsigned ROM's. Look for another SPL, one with developer edition in the title is good and works quite well for me.
I have an Orange also, the first thing to do is install the SPL then flash the radio (.05 is good) then get a new ROM!
Hope this helps
i think i broke my phone!!!!!
lol
i put the 2 files sspl and jump into my Diamond then i run sspl from my diamond and my phone resets.
The background image flashs a bit now. I still cant update the ROM and ideas what im doing wrong?
james soules said:
i think i broke my phone!!!!!
lol
i put the 2 files sspl and jump into my Diamond then i run sspl from my diamond and my phone resets.
The background image flashs a bit now. I still cant update the ROM and ideas what im doing wrong?
Click to expand...
Click to collapse
You need to do the following
1. Download the Unsigned HardSPL 1.24 from here http://forum.xda-developers.com/showthread.php?t=408621 and extract to a folder on your PC. Make sure you have Active sync installed and setup with your Diamond. Run the Updater in the 1.24 folder. Once the Phone reboots reconnect with active sync.
2. Download any of the ROMS on here and run the ROM to flash the phone.
Thats it !!!!!
Topboy
as i go to add a ROM i get a error saying the application failed to initialize properly ( 0xc0000135) click OK to terminate
Or check www.modmydiamond.info for easy to understand information
i get the above error as i try to add RUU
Hard SPL won't work
Hello,
From what I've read on the forum and also on www.modmydiamond.info, I gather I need to go through the Hard SPL step before installing any ROM.
However, after trying 2 different SPLs (hard_spl.120 and diamond_hspl_1.24) it still doesn't work.
I'm stuck at 0%.
Thanks
Read here....
As an alternative to the other threads try this one:
http://forum.xda-developers.com/showthread.php?t=416211
Its about the most comprehensive writeup I've seen to quickly and easily get your Diamond set from HardSPL to Radios to ROM's
Also read the WiKi's section at the top of the forum......
Query on Orange htc Upgrade ROM.
Hi There,
I have recently purchased a htc diamond, it was originally an Orange unit but is unblocked.The ROM version is 1.37 but I wish to flash to 1.93.I have the Orange released version of the 1.93 as htc wont support me direct.Question is, if I do this will the unit revert back to being Orange??ie.....does this flash the radio back?? or will it remained unblocked??
Thanks in advance...
james soules said:
Hello i have a HTC orange Touch Diamond and i want to update the ROM as it is terrible. I am not that technical. can someone please explain what i need to do from scratch.
Thank you
Click to expand...
Click to collapse
thxthxthxthx
Forgive me if this have been asked before but I am unable to find a windows6 for my I-mate K-jam. So far I have managed to change my ipl/spl from 1.02 to 3.08 and ran the CID unlocking from CMD. but I don't know where to find a compatible version of windows 6 for my phone, not that I have tried any yet.
another thing is can I upgrade it without a mini-sd card, I really don't have one and don't feel like getting one atm, maybe something like replace windows 5 with 6 from the pc, I am really a noob at this :\.