Develop Bugs

Something i still don't understand about USPL...

Hello,
So much time in the forum and i still didn't get this part properly:
I have used USPL for the Artemis, and i have been flashing some ROMs with no issues at all. My problem is that i want to try out an official WM6 ROM:
HTC_P3300_WWE_3.13.405.1_4.1.13.44_02.94.90_Ship_R
And i know this will overwrite my SPL once again. I currently have SPL 1.11.0000 (so it is CID unlocked).
Can i flash this ROM safely without bricking the Artemis? (silly question but better safe than sorry). I know that if my SPL gets overwritten i have to USPL once again in order to flash cooked roms, this part i got
Basically what i need to know is if USPL will make the Artemis flashable with ANY type of ROM (cooked, official, etc).
Thanks for any help.

yep, uspl will allow officail/cooked roms
tried flashing official rom with out uspl and my ppc was showing SPL 1.11.0000 from before, it wouldn't flash even though it was the official rom.
flashed with uspl and all was fine

Okay thank you

hey dude - did you read the uspl manual by POF
the uspl tool for artemis temporarily add files to the phone RAM so that it will allow any rom to be flashed! once the phone is immediatly soft-reseted after running the uspl utility the uspl files will be deleted (from the ram i think) and it will be protected again (locked again) the uspl tool by pof does not change the ispl it just create kind of a backdoor way! (my analogy)
from experience a hard reset is alway beneficial and necessary from my point of view after flashing roms
also soft rest is useful before running the uspl - u need ram
best wishes and happy flashing - we are flashing addicts here thanks to pof

jahrami:- not true, start_uspl thru cewrite.exe adds some files to allow Ruu to flash USPL (SPL:1.11.0000) after flashing spl is finished(correctly) U can do as many HARD/Soft resets as u want to. U can flash whatever U want as many times U want to. But u need to take care if its not SHIP rom (they flash SPL as well) While u'll use only cooked roms, u can sleep in peace. Best way is to check SPL version always before flashing.

phsnake said:
jahrami:- not true, start_uspl thru cewrite.exe adds some files to allow Ruu to flash USPL (SPL:1.11.0000) after flashing spl is finished(correctly) U can do as many HARD/Soft resets as u want to. U can flash whatever U want as many times U want to. But u need to take care if its not SHIP rom (they flash SPL as well) While u'll use only cooked roms, u can sleep in peace. Best way is to check SPL version always before flashing.
Click to expand...
Click to collapse
Hi phsnake
When you use uspl does it change the spl version??
read the notes 2-6 in the uspl manual
2 says the uspl does not change imei we all agree
3 says says the uspl it does not correct cid (country id) area yeah
4 says the uspl TEMPORARILY unclock the device
5 says the uspl AFTER FLASHING the phone is set back to factory settings
dear phsnake ppl were running uspl, soft reseting their phones, then try to flash a rom (they reported that flashing did not work) so it seems that files extracted by uspl go into a temporarily memory would you say its the rom or ram?
i just offered my understanding to what i've read i am not as intelligent as pof - i am just an ordinary member i am even not senior
best wishes

The USPL is permanent unless it is overwritten by another FULL flash (including SPL). If you just flash the OS, GSM, EXT_ROM or SPLASH parts, it'll be there forever.
I tried flashing an official ROM after USPL and it still said the device didn't have the characteristics for the ROM or whatever, so i extracted OS.nb, flashed it, and it worked like a charm.
For as long as you have SPL 1.11.0000 (forever if you don't overwrite it) you can flash away as you like.

SPL 2.03 Problems

Hi,
I recently had my diamond return to me from HTC (screen repair) and as part of the normal process they flash the latest rom when they return the device.
Now i have the latest 2.03 rom and 2.03 SPL (did not know there was a 2.03 SPL)
Now for the problem..... I cant seem to flash to a hard SPL ie 1.24 or 1.40, i have tried them all and i have tried the manual method (no luck).
Prior to me sending off my diamond i had flashed the 1.24 spl with no issues.
I have looked all over the forum and i can't find any mention of a 2.03 SPL and i am wondering is this new SPL prevents you from flashing to any older/other SPL versions.
If any one has any ideas please help.

_)_?_:?
problems because of the SPL?
There is a good part to the new SPL?
could someone get this SPL? for a separate installation?
thanks :d

Yeah it is strange i had no idea there was a new one until i tried to flash and it shows spl 2.03 on the boot loader screen.
If someone knows how i can get a copy of this SPL off my device i will post it for all to look at.

bump...Loads of people have looked at this, no one with any ideas ??

if i remember corectly i had it on my phone also, but i could change it...

littlej said:
if i remember corectly i had it on my phone also, but i could change it...
Click to expand...
Click to collapse
ahhh interesting..... which SPL do you now have on your diamond ?

You have to use SSPL.
Just flashed HardSPL 1.24 over 2.03.

...
y want to instal spl 2.03 to test a modified room

Hard spl problem!!!

I know you guys most be tired of this but im still a lil confused about all this since i have searched around and i have still to know how to return the stock SPL...now i know theres alot of post that show how but what i need to do is find out one which i dont have to use my phone:
What i mean is....i dont have to copy SSManual.bat to my fun and run it from my phone...because i have to return my phone to HTC for warranty reasons but i cannot get passed the align screen configuration at boot since my touch is messed up (p.s. i can still flash and active sync)...
what i need to know is a way to return to the stock SPL without using the phone (except for Active Sync)...
p.s. if i have the ASIA WWE HK ROM on the SPL would be 1.34 or 1.93?
thank you!!
[SOLVED]
Basically, thanks to the ppl in this thread for helping.....since i couldnt get passed my align screen cause of hardware problems with my screen i couldnt access the sspl-manual in order to revert to stock spl so what i did is i flash my phone with Dia duit 1.4 which has no welcome screen or align screen so i could go thru to the phone then performed the sspl manual and reverted to the 1.93 spl (my version)and afterwards i flash my phone with the Asia HTC wwe orginal romhttp://forum.xda-developers.com/showthread.php?t=410720 ......i know ure supposed to first flash orginal rom and then the stock spl but i took a chance and it worked...THANKS u guys keep up the good work and now its up to HTC to fix my hardware....Hoping its on warranty

By the way right now im on Olinex 1.40
thank you again!!!

can't you install the hardspl through bootloader mode?

Unfortunately no, everytime i do either i get an error [202] or it goes straight to 100% but then when i check with the vol - and reset button it shows olinex 1.40

did anybody ever try to send it without reverting back to the stock spl ?

emy09 said:
did anybody ever try to send it without reverting back to the stock spl ?
Click to expand...
Click to collapse
Try to install a rom which don't have to align the screen. then you copy the file you wants from the phone.
Good luck

does anybody know of a rom like that that exists cause that sounds like a pretty good idea!!

hi
i had your problem and has olinex 1.40 anld like to restore hard spl
first you should install original rom on your device
then install original hard spl ( i try it )
download rom 1.93 WWE from the htc site (it should be 1.93)
then hard spl with it (copy sspl manual om your device run it then restart you device run it again then connect it to pc and run ruu
hard spl : http://rapidshare.com/files/215819452/1.93_Original.rar.html
sorry my English is not good

http://forum.xda-developers.com/showthread.php?t=493719

emy09 said:
does anybody know of a rom like that that exists cause that sounds like a pretty good idea!!
Click to expand...
Click to collapse
i think the new rom of suiller (diadiut 1.4) would do. you don't need to screen align after flashing.

azera_2000 said:
hi
i had your problem and has olinex 1.40 anld like to restore hard spl
first you should install original rom on your device
then install original hard spl ( i try it )
download rom 1.93 WWE from the htc site (it should be 1.93)
then hard spl with it (copy sspl manual om your device run it then restart you device run it again then connect it to pc and run ruu
hard spl : http://rapidshare.com/files/215819452/1.93_Original.rar.html
sorry my English is not good
Click to expand...
Click to collapse
I appreciate the help but the problem is that i cannot get passed the align screen of the first boot which means i cant run sspl manual since i cannot in the files from my phone.....also if i do flash the Dia duit 1.4 rom which does not boot with the align screen or welcome screen, dont i have to flash the original rom before putting the stock SPL !!.....thank you guys for the info

SPL-2.03

Hi,
I sent my diamond back for repairs, and when it came back it came with SPL-2.03
As a result, I can not flash RUU_Signed_1_93OliNex_HSPL_UnsignedEdition which i need to install a cooked rom from here
Anyone have any ideas what I can do?
Thanks!!

you can't flash SPL 1.93???

My Diamond had SPL 2.03 and I managed to flash 1.93, maybe you're just doing something wrong.

I noticed there's a quite a few different new official SPL versions out there..
Can someone tell me if there's a difference in performance/battery life between hard-spl 1.40 & 1.93? I'd really appreciate it.

just run the sspl-manual from your device and try flashing HSPL after your screen becomes blank.

how to upgrade a rom 6.1 to artemis?

please help me,i want to update my artemis to wm6.1,how to proced?

Upgrade
First of all and most importantly you need instal a soft USPL. This is essential and will stop your phone from bricking.
Do a forum search for POF he is the god of all things unlocking and USPL and find the correct USPL for your phone. There are usually instructions attached so have a deep read.
Then you just need to flash the rom of your choice, again you will be instucted all the way through the flashing, then when you you are instructed all is well and the phone reboots ALWAYS DO A HARD RESET, Remember though that if you want to flash other roms you must always reinstal the USPL as this will not survive the hard reset.