Hello
I am new here . I found Qtek 9090 PH20B. At the begining it have got problem with alignate screen ... I have try everithing but always stuck on this screen... Put WM 6.5 WM 2003 Romupdate everithing but still not work i think this phone is broken that is probably why i found it .. : ( on the left of display is little crap but i think its only glass to protect displey ... i think i am at end i have no ideas ..
some information i have serial/usb 2.06 its Qtek 9090 PH20b
if someone have some ideas to help me i will be very glad : )
i know my english is horrible
bye Henco
Hi,
maybe your touchscreen part is broken.
what kind of crap on the left side of the display?cracks?
its better to take your phone to a repair center and let them check it for you.
yea i think this is last thing to do
this crap is on the left up corner about 3 cm but you can normal touch screen and this alignate cross i dont thing it is problem with this crap but nobody know it i will see in reapair center
thanks
Related
Hey guys
I was wondering if anyone can help me with fixing my touch screen option. It hasnt been working, and No i didnt drop the PDA or anything, my screen is as bright as new, but suddenly sisnce yesterday it stopped working and no soft reset or hard reset can fix this.
My phone is a SX66 of Cingular (AT&T varient)
I have been using this for almost a year without any problems at all.
UPDATE
Amid all the hard resets, all of a sudden. once my touch screen started working. but just after few mins of use it slowly started malfunctioning and finally it stopped totally. Which kinda leads me to believe that there may be a software/firmware glitch !
So I downgraded to my original system and extended roms. hard resetted, but didnt work (since i cant by pass the touch screen alignment tests, im using a remote PC based software to control my PDA as its synced through USB)
Now heres my help query. I observed that doesnt matter what ROMs (system, extended, radio etc) i have upgrade or downgrade my PDA splash screen remained as the one i originally changed to, same goes with the unlocking of my GSM PDA, i never had to use unlocker ever after the 1st time i did it.
Which means. theres a place in the PDA where these information are stored permanently and doesnt get flushed when u flush ROMs. Im guessing what if theres the TOUCHSCREEN initiation file/firmware/software which kicks in everytime when u start the PDA from the same place which doesnt get flushed. And that Touchscreen enable/disable file is either accidentally disabled or corrupt !
Is there any such file of the touch screen initiation ?
Is there any way I can remove any such files from registry, storage and copy back fresh ones ? That way i would sure its a hardware glitch and not a software. Like I said, my gut feeling is there may be a touchscreen initiation file which doesnt get flushed even when ur upgrading or downgrading the ROMs; and that file is either Disabled or Corrupt.
Can any developers help ? Would be kind if you can pass this queries to our very good friends at the xda-developers.
Thanks
Munasir
http://pdatechcenter.nl/home_uk.html
Dutch company, very pro and efficient altough tthe best way is to ship the money with the broken pda.
They have any part.
I've tried it 2 weeks ago and I'm very happy with the service.
Go and check the site
Hey Thanks for the link man, unfortunately Im based out of Asia so ya it kinda sucks as theres no repair shop around my area. Closest prolly will be Singapore or Thailand (i hope)
But im still hoping some techy at the xda-developers checks this issue and prolly be able to finally come to conclusion if its a software or a hardware fault.
Hey.. kan anybody help me?. My P3300 goes black several times a day?? i have flashed it back to its original ROM to check if that would help, but i didn´t.
The phone just goes black and i cant turn it on again without soft-resetting it. Sometimes the screen flicker and some stribes are showing across the screen before it turnes black??
I hope you can help me
Best regards Michael
i had the same problem, i send it to repair by t-mobile and they changed the lcd screen problem fixed
Seems to be a common problem, as I have exactly the same with my P3300. Send and email to the HTC customer support to ask if it could be a software issue (no reply yet) - but now that I read this post I guess I can send my device for repair right away...
I don't think the LCD is to blame for this issue. (why would the phone firmware "crash" - and unable to reboot ? )
@MicTh : those updates you've installed ? were they recent Mobile6 (B&B > 4.1, Vanilla 2.0,.. ?) from this board ?
I've got the same problem, T-Mobile replaced my handset twice (new IMEI) - reason "motherboard replaced" ???
I DO believe that USPL unlock is causing this problem now - too many MDA 3c's failing - while HTC 3000 / Orbits seem to run fine.
No.. I run the original WM6 ROM
No.. I run the original WM6 ROM, and I have also switched back to the one it came with, but i does not help
I'm getting this problem too... screen fades to black, and only way to re-start is to soft-reset. I have had two new motherboards in my original, and now HTC have replaced with a new unit, with factory WM6 and problem is the same. I was wondering if it was anything to do with software, as i do have a number of applications installed - but which one is to blame?
After I removed Spb Time, my P3300 works fine (for a week now)
pnyg
do I have sbp time? (is it "standard" or 3rd party s/w?) if I do, how do I remove it?
no, I've not got spb time, so its not that in my case....
I also experienced this problem when I installed Meschle 3.01 ROM. Cant remember if its vanilla or full version as I installed both.
I am now back to Original WM6 WWE from HTC. No problem at the moment.
first hang-up end with black scream
I have the same problem..I think
started with WM5 ..but even with WM6 is the same!
Problem description:
first of all app is hanging (ones a week)
first time rest ,its trying to start windows but will hang-up by start-up windows
second rest hangs on white scream (with WM version number)
further resetting doesn't help
white scream changes to black (some times in columns) and them totally black
some time the black scream is flashing
can any one help me?
i don’t know what to tray anymore? I think is some Hardware issue?
hang-up and later ended with black scream
I have the same problem..I think
started with WM5 ..but even with WM6 is the same!
Problem description:
first of all app is hanging (ones a week)
first time rest ,its trying to start windows but will hang-up by start-up windows
second rest hangs on white scream (with WM version number)
further resetting doesn't help
white scream changes to black (some times in columns) and them totally black
some time the black scream is flashing
can any one help me?
i don’t know what to tray anymore? I think is some Hardware issue?
I've had at least 3 separate P3300s with this problem. I'm sure its a hardware issue, and I have finally persuaded my supplier to refund 75% of my purchase price, so I can buy something different. I am sure HTC must know this is a problem, but the uk repair centre seem unable to fix it, presumably as its a batch problem, and all the boards they have are faulty.
i have exactly the same problem with my Dopod M70 (Artemis300). Maybe it have some problem in the motherboard design which HTC should let us know
My orbit do the same, when it boot win everythink is working fine. Someone did say: When you apply pressure, it fade to black. I think it maybe have something with the housing design or battery.
keckek said:
i have exactly the same problem with my Dopod M70 (Artemis300). Maybe it have some problem in the motherboard design which HTC should let us know
Click to expand...
Click to collapse
I think i solve my own problem, after hours, i found out when we press in the back phone, near the display cable position, the screen become black and hang immediatetly. so i try to open back cover, remove cable and motherboard. Use alcohol to clean the contact display cable then put its together. Tighten motherboard, and wow, my Dopod M700 are back to life again, now how hard i press, everything stay fine. No strange behavitor for 5 days. GREAT!!!
Hope everyone think my experience useful
Sounds great but...
Hey.. sounds great.. but i´m affraid to take mine appart.. i think it is very difficult to take the cover appart without ruin it
MicTh said:
Hey.. sounds great.. but i´m affraid to take mine appart.. i think it is very difficult to take the cover appart without ruin it
Click to expand...
Click to collapse
No it is easy(much easier than TyTN) to open Orbit/P3300, you have intructions in the wiki. First you check if you have right tools...
igord said:
My orbit do the same, when it boot win everythink is working fine. Someone did say: When you apply pressure, it fade to black. I think it maybe have something with the housing design or battery.
Click to expand...
Click to collapse
That's probably me from this post?
http://forum.xda-developers.com/showthread.php?t=290414
I find that if you apply pressure on the outside casing at approximately where the simcard would be it switches itself off....
Yes it's your post. I have same problem. My orbit is working fine all day, but it is on the desk, didn't touch it. I bought P3300 housing, so I will change it, maybe it fix a problem.
a few days ago my artemis hung up every 10 minutes or it's display went to white screen.
now pda doesn't turn on and there is no light indicator for charge status
please, help me getting lovely artemis put right)
Hi, sintipon
I got the same prob, its started a few days ago, i can get it on sometimes but then it just locks up and when i try touch the screen it just flashes. I'll let u kno if ii find anything.
If u get anything please let me kno.
Mine is like that for sa month now... No luck whatever i tried... I went to service, and the told me that the board was off and i need a new one! Very expensive, i will change phone!!
will u think that this situation maybe relate to flash the device's rom??
or relate to some particular software which may lead to this crash??
display becomes black or becomes white..
hello guys ..
im sorry to tell you that if you encounter this kind of problem your Artemis is already crash.... and nothing to do with but to send it to service center. thats a CPU problem.
its ok if you flash your Artemis with the softwares you found here but be care you must know whats the function of the SW before you install . may be you did to much over clock on your cpu. Our cpu is only 201 Mhz. hmmppp..
last tym i try also to over clock tell 300 but 10 seconds later my display becomes white heheh... so change cpu..
may be 247Mhz is ok, like Artemis Touch over clock.
also a lesson for me..
I have a problem with my Artemis. I'll try to decribe the problem and if anyone can help me i will be thankful.
When is Power on it works few minutes than it freeze and screen desapears. After that I try to power but it doesnt work. It needs time to accept the Power comand and I don't know where problem is... (i thing that it's about temperature but i'm not sure)
I tryed to flash with later software and win mobile 5 but the same thing happens.
Any help?
Please specify which applications you have installed and eventually which ROM.
I strongly recommand you to flash your device with latest ROMs like Black and Blue one or others (see the Windows mobile 6 section of Artemis)...
A hard reset would solve your problem anyhow I suppose.
Are you overclocking your CPU with some software? like BatteryStatus for example?
Please let us know...
Gues i fixed the problem
It not was about ROM... I have tryed flashing with Black & Blue, Vanilla etc. but the problem was the same. When I put the Phone in the pocked it freezes. Meybe it was problem with cooling.
Anyway I used a tutorial how to upen the phone, i opened it, cleaned it (using spray for clean) and now it works fine i gues.
Thanks a lot...
Regards
rrezarthajrizi said:
It not was about ROM... I have tryed flashing with Black & Blue, Vanilla etc. but the problem was the same. When I put the Phone in the pocked it freezes. Meybe it was problem with cooling.
Anyway I used a tutorial how to upen the phone, i opened it, cleaned it (using spray for clean) and now it works fine i gues.
Thanks a lot...
Regards
Click to expand...
Click to collapse
can you please put that tuturial in this post????
thanks
jayss said:
can you please put that tuturial in this post????
thanks
Click to expand...
Click to collapse
Wiki is your friend....
http://wiki.xda-developers.com/index.php?pagename=Artemis_Disassemble
I had the same problem with mine....
The phone is fecked take it back to the makers and get a replacement..
I had the exact same problem with my P3300. It's a malfunction in the Motherboard. I've called the dutch helpdesk and because a hard reset didn't do much good the PDA was picked up later that day to be sent to Eurotwice, the repair station in Belgium. I got my phone back 2 weeks later, I started it and it froze again! So I immediatly called HTC Netherlands and again, the P3300 was picked up by UPS that afternoon. The second time I wrote a letter to the repair station and sent it with my phone. In another topic on another website I read that some other phone with the same problem had been fixed by replacing the motherboard. I got my phone back today and it works great! It hasn't crashed today, and I have confidence it won't in the future. So my tip to you and anyone who experiences this problem: Call the HTC helpdesk in your country and ask them to sent your PDA to a repair station. It might take a while but they fix it well! By the way, you have 2 years full garantee so it didn't cost me anything! Great service from HTC!
Had the same problem.
Power was on, then de screen went black and stayed black even after pushing the right upper side button. Had about 4.90mb free storage memory on the phone and 200mb on my card left.
Soft reset didn't work but a hard reset did!
I have the same problem for the last week
I tried to change Roms to original and back to manila, the same problem.
the artemis freeze suddenly without ant reason. after calls, before calls..
it's not wake up and it's show a blank screen. after few soft reset and battery replacement is wake up and work fine till the next time.
for now , I'm work with doppod original rom wm5 but no WIFI.
I think it started last week when I installs "B&B 5.0 love" rom, before that It work fine with pdviet manila2D.
problem upgrade my rom
I'm now have a O2 UK roms on my device.
I try update it to Touch 4.02, with the UPSL but it no working.
the bar with percents jump from 0% to 100% in sec. and I still having the same rom.
I read the uspl guide.
can yo uhelp me ?
im a noob to all of this but i just bought a tilt with PDA Corner Ultimate ROM wm 6.5 and ive noticed that the fn function on the key board is a little messed up the secondary signs are in diffrent places then shown and also if im texting and ok out of it the screen gose back to the way it would if the phone was closed even tho its not any ideas?
Welcome to the forum
perhaps you´ll have to do a hard reset, it always helps
Have a read here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser
Good luck,