Related
Have decided that the Universal is too flawed as a phone to be usable (it's impossible to use it with one hand, which is something I need to do daily), and have decided to step back to my BA (orange M2K).
Currently working hard at a new job so don't really have time to search the forum for all the new tweaks etc so would be very thankful if someone could answer the following questions:
What's the latest radio upgrade for the BA and are there some clear instructions on installing it?
Have there been any updates to WM2003SE I should know about? (in the last 6 months).
Will ActiveSync 4.1 work with WM2003SE or will I have to uninstall 4.1 and re-install 3.8??
As I've pointed out, I'm aware that asking for help like this isn't really the "XDA-way" and I'm fully expecting a plethora of "Use Search" posts (or a stony silence), but any useful replies would be greatly appreciated.
Try to answer
I will try to answer your questions
1.For detailed explaination look here
2.As far as I know there are no drastic changes in WM2003SE roms, more info you can find here and here
3.ActiveSync 4.X will work fine with WM2003SE (except if you want to sync over WIFI, if you do uninstall Activesync 4.X and install 3.8 )
More of the questions you may ask are covered here
Question for you
Why you stepping back, i want to buy Universal, and i really want to know is it worth buing, what do you dislike in it ?
Re: Question for you
xplode said:
Why you stepping back, i want to buy Universal, and i really want to know is it worth buing, what do you dislike in it ?
Click to expand...
Click to collapse
Cheers for the help.
Iam having real problems getting on with the Universal, it makes a good palmtop/mini-laptop, and when I had time to use it, eg commuting to work by train, then it was great - internet over GPRS works well and the true VGA screen is very clear.
BUT I no longer have the time for all that, (I commute by motorcycle now - over 3 hours of riding a day) now the only use for the unit is diary and phone, and sadly it falls flat on it's face for this. The phone can't really be trusted for any call longer than 20 minutes (I've had some embarrasing re-calls recently) and it's impossible to use with one hand. If I'm heading out of the office and want to send a quick text to my wife, it's a two handed operation, even with VJPhoneTools. Also WM5 is not all it's cracked up to be.
I am going to try the BA, with PocketBreeze and small menu (very good programs for both WM5 and WM2003SE) and see how I get on. I would go back to my Nokia 8210, and just use the Universal as a PDA - but something in me rebels at the thought of carrying two devices when I could carry just one - so I'm going to re-try the BA.
Maybe when HTC bring out a unit with the BA's usability (lots of external buttons in sensible places,one handed usage when in PDA mode), and the Universal's convergence capability (proper keyboard, high resolution screen, full connectivity etc), I will be happy - but right now, the Universal can't hack it.
Thanks for the reply
Hello there,
What I Have: Att 8525 Herm100
Rom: Att's Mobile 6
Everything is stock but the extended life battery
The problem I am having is when ever I try to activate my WiFi the phone doesn't do anything. I am not sure if there is a wifi card or not but that's want I want to know. I have tried everything from activating it in com manager to going into the settings and activating it manually and nothing happens it acts like I didn't even hit the button to activate it. Is there a wifi card in the phone or is it integrated on the motherboard in the phone. Note: I bought this phone off e-bay and the wifi never worked when I received the phone.
I am new here and if there is a post about this already I am sorry.
I hate it when that happens.
To begin, there were two ATT OEM WM6 roms relevant to the 8525 that I noticed deep in the bowels of XGA.
I chose the later file (higher revision numbers) I found it here:
http://wiki.xda-developers.com/index.php?pagename=Available Original Shipped WM6 ROM Versions
From comm manager when I click the tower button on within a second the spinning windoze icon shows something is happening. It then starts "sniffing" for my preset wifi connection (ATT supplied 2wire portal 802.11g).
Now, if yours does not show the spinning windoze working icon when you turn on wifi? There obviously is a problem. This could be software, or hardware related (duh). If there is no error message related to "wifi is not an option, unavailable, or screwed" then my first guess is there is something missing or damaged in the ROM update that was applied to your device. As far as I know all 8525 (herm100) were shipped with wm5. It had been mentioned in the volumes of xda that the first AT&T WM6 rom was a little buggy. Try the later released AT&T WM6 update.
It was a run file so no muss no fuss. Sync the phone run the update from the pc, three minutes later the phone is flashed to ATT WM6 professional.
You could take it to a ATT shop? But, I think that without a doubt they would hand it back and say you need a new phone with a 20 year contract and 3g data plan even Obama would blush at.
Try the hard reset. take a picture of the startup screens so you have the numbers and see if the wifi startup is working after the reset. If not then compare the numbers to the above mentioned roms. If the indications are you have the first issue of WM6 from ATT try flashing the second release. If that still fails then your device could indeed have a hardware problem.
The wifi is indeed built into the system and if that chip on the board is not working it could be a overly expensive problem. Possibly a shop has a working board they would swap out cheap? Otherwise, it is a fun phone you can keep notes on, run gps software if you have a bluetooth gps receiver and software like tomtom.
To be honest the wifi on my 8525 has been convenient when around the house to check the local weather radar when I hear a thunder outside, or browse headlines from the porcelain room or even leave messenger turned on incase a gamer friend is looking for someone to get shot up in a game.
I have used the live search voice thing to amaze the neighbors once. But, the limited range of wifi is a real drawback to how truly wonderful that addition could be.
HELP Please! Wi-Fi not working!!!
Hi to XDA all users !!!
MY Hermes - HTC TyTN [Herm200]
I bought HTC Hermes myself year ago.
there was flashed a WM5.0, I've just downloaded from here HARD SPL & WM6,1 (Custom) Flashed.
Wi-Fi will works on WM5.0.
Well here I am at 6.1 flashed and now is not working Wi-Fi. When i pressed Power ON - loading long and nothing happens.
Other methods are also tried on Commanager and Settings - but did not help.
What do I need to do my dear.
HELP!
Thank you for your attention!
Hi Nurk.
Since the wifi worked on wm5 but failed after the 6.1 flash. I would guess the problem is in the 6.1 components. You might start with contacting the kitchen rom you employed for WM6.1 thread and see if this has happened to others. Next step would be to check the radio rom version. I did see on xda an assortment of Radio roms.
If your not totally in love with the current rom you have flashed? Try another 6.1 or even a 6.5 and see whats poppin.
and what you have in HKLM\Software\HTC\CommManager\WLAN\DeviceName?
utak3r said:
and what you have in HKLM\Software\HTC\CommManager\WLAN\DeviceName?
Click to expand...
Click to collapse
I have get this from registry:
HKLM\Software\HTC\CommManager\WLAN\DeviceName - {98C5250D-C29A-4985-AE5F-AFE5367E5006}\TIACXWLN1
Hi there
Firstly i am a very heavy user of my PDA's but not very technical & apologies for long post, but cant find the answers anywhere else on this site.
Have been using HTC SIM free handsets for approx 4.5 Years now, and been using a HTC TyTN II for the last year, updated the ROM from WM6.0 to WM 6.1 then everything started going wrong so decided to spend the £500 to jump to the HTC Touch Pro 2 but am very frustrated and almost at the point of going back to the TyTN II or going to another brand of phone as none of the software that i had on my TyTN II works with the Touch Pro 2 WM 6.1, as follows:
1. TomTom Navigator 6 does not work but works on TyTN II WM 6.1?
2. TomTom Navigator 7 (Tried it & HTC Confirmed it will not work either)
3. MS Voice Command or any other voice command software does not work
4. Many other MUST HAVE programs i had on TyTN II WM6.1 also will not work now
5. Company supplied software wont work either,
6. It also wont work with my Landrover Freelander 2 PTI kit, so am forced to go back to a BT Headset
Surely PDA software OS 6.1 cant be that different from version 6.0 in my experience with the TyTN II as 6.1 just had small enhancements to 6.0?
I at least need some navigation & voice command software to work on the Touch Pro 2 as it just can not be operated safely whilst moving otherwise, and there is no point in having it in the first place if i can't get these two software types to work, which is a big problem for me.
Does anyone know what software does work, although i think it is the HTC TouchFlo Skin that is the problem with other programs i have tried this weekend, as it does not allow third part software to be displayed on the home screen easily, even google apps toolbar has probs, does this sound feasible?
Can anyone help me out with this or did i buy the wrong phone maybe a Touch Pro would have been better as closer to my TyTN II layout and functions?
Thanks in advance
Alex
alexsimmons said:
Hi there
Firstly i am a very heavy user of my PDA's but not very technical & apologies for long post, but cant find the answers anywhere else on this site.
Have been using HTC SIM free handsets for approx 4.5 Years now, and been using a HTC TyTN II for the last year, updated the ROM from WM6.0 to WM 6.1 then everything started going wrong so decided to spend the £500 to jump to the HTC Touch Pro 2 but am very frustrated and almost at the point of going back to the TyTN II or going to another brand of phone as none of the software that i had on my TyTN II works with the Touch Pro 2 WM 6.1, as follows:
1. TomTom Navigator 6 does not work but works on TyTN II WM 6.1?
2. TomTom Navigator 7 (Tried it & HTC Confirmed it will not work either)
3. MS Voice Command or any other voice command software does not work
4. Many other MUST HAVE programs i had on TyTN II WM6.1 also will not work now
5. Company supplied software wont work either,
6. It also wont work with my Landrover Freelander 2 PTI kit, so am forced to go back to a BT Headset
Surely PDA software OS 6.1 cant be that different from version 6.0 in my experience with the TyTN II as 6.1 just had small enhancements to 6.0?
I at least need some navigation & voice command software to work on the Touch Pro 2 as it just can not be operated safely whilst moving otherwise, and there is no point in having it in the first place if i can't get these two software types to work, which is a big problem for me.
Does anyone know what software does work, although i think it is the HTC TouchFlo Skin that is the problem with other programs i have tried this weekend, as it does not allow third part software to be displayed on the home screen easily, even google apps toolbar has probs, does this sound feasible?
Can anyone help me out with this or did i buy the wrong phone maybe a Touch Pro would have been better as closer to my TyTN II layout and functions?
Thanks in advance
Alex
Click to expand...
Click to collapse
TT 7 Does work with Rhodium, as does VC, everything has it's quirks of config. BT has always been a pain in the ass and requires different settings for different HFPs, Car Kits and A2DPs.
If you wan to kill Touch Flow, go into start/settings/personal/today and untick the TF.
There are plenty of threads and posts that will resolve most of your issues mate.
Search the entire forum, not just the Rhodium section and you'll get the answers you need.
Cheers,
Beasty
From your list of programs I can only confirm that Tomtom 7 DOES work, and it works very well. I'm using 7.915.9196 VGA
I haven't installed much software yet as Ive been a bit busy, but everything I've put on has worked pefectly. Admittedly I only installed stuff that worked on my Diamond which was also wm6.1
alexsimmons said:
Hi there
Firstly i am a very heavy user of my PDA's but not very technical & apologies for long post, but cant find the answers anywhere else on this site.
Have been using HTC SIM free handsets for approx 4.5 Years now, and been using a HTC TyTN II for the last year, updated the ROM from WM6.0 to WM 6.1 then everything started going wrong so decided to spend the £500 to jump to the HTC Touch Pro 2 but am very frustrated and almost at the point of going back to the TyTN II or going to another brand of phone as none of the software that i had on my TyTN II works with the Touch Pro 2 WM 6.1, as follows:
1. TomTom Navigator 6 does not work but works on TyTN II WM 6.1?
2. TomTom Navigator 7 (Tried it & HTC Confirmed it will not work either)
3. MS Voice Command or any other voice command software does not work
4. Many other MUST HAVE programs i had on TyTN II WM6.1 also will not work now
5. Company supplied software wont work either,
6. It also wont work with my Landrover Freelander 2 PTI kit, so am forced to go back to a BT Headset
Surely PDA software OS 6.1 cant be that different from version 6.0 in my experience with the TyTN II as 6.1 just had small enhancements to 6.0?
I at least need some navigation & voice command software to work on the Touch Pro 2 as it just can not be operated safely whilst moving otherwise, and there is no point in having it in the first place if i can't get these two software types to work, which is a big problem for me.
Does anyone know what software does work, although i think it is the HTC TouchFlo Skin that is the problem with other programs i have tried this weekend, as it does not allow third part software to be displayed on the home screen easily, even google apps toolbar has probs, does this sound feasible?
Can anyone help me out with this or did i buy the wrong phone maybe a Touch Pro would have been better as closer to my TyTN II layout and functions?
Thanks in advance
Alex
Click to expand...
Click to collapse
first of all sorry to hear you're having so much issues with the software you need to run on the phone. i have a kaiser/tytn 2 and software from that i have working on tp2. tomtom6 from tytn 2 does not work but tomtom7 defo does. MSVC does work as well but you need to get version compatible with tp2. look in the HTC BLACKSTONE forum as most of the apps from this device work with tp2. please remember that tp2 is WVGA res so that alone may effect the compatibility of some programs. the Blackstone forum is littered with programs that you may need that will work on tp2 and even better! can't really comment on your work software as dont know what it is! good luck with searching!
oh and i know it may be silly but make sure your phone is visible for BT purposes an use phone to pair with your landrover. mine works well with my parrot system with no issues!
shingers5 said:
first of all sorry to hear you're having so much issues with the software you need to run on the phone. i have a kaiser/tytn 2 and software from that i have working on tp2. tomtom6 from tytn 2 does not work but tomtom7 defo does. MSVC does work as well but you need to get version compatible with tp2. look in the HTC BLACKSTONE forum as most of the apps from this device work with tp2. please remember that tp2 is WVGA res so that alone may effect the compatibility of some programs. the Blackstone forum is littered with programs that you may need that will work on tp2 and even better! can't really comment on your work software as dont know what it is! good luck with searching!
oh and i know it may be silly but make sure your phone is visible for BT purposes an use phone to pair with your landrover. mine works well with my parrot system with no issues!
Click to expand...
Click to collapse
What he said!
agreed that WVGA is your biggest problem. install "second today" to solve your problem with things not on the screen because of touch flo.
Hi Beasty
Thanks for tips, now i know what its codename is, it made it easier to find stuff on this excellent site after i saw your and other replies and have since loaded MS VC 1.6 UK Edition which seems to work ok although not tried it yet with my new HTC BT Headset.
In reply to the others thanks for the great info so far, i have tried loading TomTom 7 once again from the MicroSD card and it wont even load, its just says "this version of TomTom 7 is not compatible with this device" when i click "OK" it just terminates. I dont know what version it is till it loads?
A friend of mine this evening says that the closest phone on the TT7 compatability list seems to be the HTC Touch HD, and that CoPilot 7 actually lists Touch Pro2 as a compatible device, so i will have to try that i think and see if it actually does work, and will let you and the forum know
In terms of the work applications, i know they are based on the MS .NET Micro framework and so should work out of the box, but no they dont, but i think it is a screen resolution issue more than anything else.
The other app i need to run ideally is "Nimbuzz" Multi IM app, again for work.
On both of these work related apps i get an intermittent error message, saying "An error has occurred with xxxx appplication, send error report yes or no" when i choose Yes, it loops same message, when i clicked No it loops once then closes.
I removed the "Nimbuzz" application and soft reset, but still get the error message for it which is weird. So if anyone knows of a Multi IM (Inc Skype) which will run on Touch Pro 2 i look forward to knowing about it.
Work funded 50% of my Touch Pro2 purchase so need to get this all working as best i can
Thanks again for the tips, hints, instructions
Alex
shingers5 said:
[...]
MSVC does work as well but you need to get version compatible with tp2. look in the HTC BLACKSTONE forum as most of the apps from this device work with tp2.
[...]
Click to expand...
Click to collapse
Do you know if anyone has been able to get MSVC to work with the TP2 with a bluetooth headset?
I have tried both the US and European versions of MSVC 1.6 with my TP2. It only seems to work with the built-in speaker.
mschaffer said:
Do you know if anyone has been able to get MSVC to work with the TP2 with a bluetooth headset?
I have tried both the US and European versions of MSVC 1.6 with my TP2. It only seems to work with the built-in speaker.
Click to expand...
Click to collapse
haven't tried as dont use bluetooth headsets. can't stand having that bulk in my ear. from what i have read it doesn't work but i can't be certain as not used myelf
Also make sure you install .net compact framework 3.5:
http://rapidshare.com/files/77805623/NETCFv35.wm.armv4i.cab
Hi
Added "Second Today" thanks for that, what a cool app, except got all those nasty recurring error messages that i had big trouble getting rid of.
Have now returned to bog standard WM6.1 having got rid of TouchFlo 3D thanks to Beasty
I like to use what i am used to till i have all the progs i need to be work productive on the move, will then fiddle with TouchFlo 3D laterz
Alex
tomtom 7.450 works well on my tp2
alexsimmons said:
Hi
Added "Second Today" thanks for that, what a cool app, except got all those nasty recurring error messages that i had big trouble getting rid of.
Have now returned to bog standard WM6.1 having got rid of TouchFlo 3D thanks to Beasty
I like to use what i am used to till i have all the progs i need to be work productive on the move, will then fiddle with TouchFlo 3D laterz
Alex
Click to expand...
Click to collapse
No problem sir,
We are all here to help each other, TF3D is a highly usefull interface, just takes a bit of getting used to, 2nd today and TF3D is a great combination especially when you configure one of the softkeys to switch between both.
Multi IM you could try BeeJive, not a lot of experience with this (seem to remember Elite team including it in their Roms) but there are plenty available on the net.
Cheers,
Beasty
Hi All
Got MSVC working on TP2 but not with a BT headset so have just bought the Parrot Minikit Slim with voice dialling, although the voice dialling only works if you can sync the TP 2 with it just like my landrover, but it does not tell you this on the outside of the box.
Guess what? The TP2 is not listed on the Parrot Minikit compatibility list so may have spent/wasted another £70 today as cant sync the TP2 contacts with the Parrot system which is the same prob i was having with my landrover
Alex
alexsimmons said:
Hi there
Firstly i am a very heavy user of my PDA's but not very technical & apologies for long post, but cant find the answers anywhere else on this site.
Have been using HTC SIM free handsets for approx 4.5 Years now, and been using a HTC TyTN II for the last year, updated the ROM from WM6.0 to WM 6.1 then everything started going wrong so decided to spend the £500 to jump to the HTC Touch Pro 2 but am very frustrated and almost at the point of going back to the TyTN II or going to another brand of phone as none of the software that i had on my TyTN II works with the Touch Pro 2 WM 6.1, as follows:
1. TomTom Navigator 6 does not work but works on TyTN II WM 6.1?
2. TomTom Navigator 7 (Tried it & HTC Confirmed it will not work either)
3. MS Voice Command or any other voice command software does not work
4. Many other MUST HAVE programs i had on TyTN II WM6.1 also will not work now
5. Company supplied software wont work either,
6. It also wont work with my Landrover Freelander 2 PTI kit, so am forced to go back to a BT Headset
Surely PDA software OS 6.1 cant be that different from version 6.0 in my experience with the TyTN II as 6.1 just had small enhancements to 6.0?
I at least need some navigation & voice command software to work on the Touch Pro 2 as it just can not be operated safely whilst moving otherwise, and there is no point in having it in the first place if i can't get these two software types to work, which is a big problem for me.
Does anyone know what software does work, although i think it is the HTC TouchFlo Skin that is the problem with other programs i have tried this weekend, as it does not allow third part software to be displayed on the home screen easily, even google apps toolbar has probs, does this sound feasible?
Can anyone help me out with this or did i buy the wrong phone maybe a Touch Pro would have been better as closer to my TyTN II layout and functions?
Thanks in advance
Alex
Click to expand...
Click to collapse
Hey Alex...
I am sorry to hear that you are having so many problems and I have a fix-all solution for you.... I have a posting up in the marketplace, where I am looking to Trade a HTC Titan (Sprint Mogul) and 2 HTC Kaisers (AT&T Tilt's) for 1 GSM Touch Pro 2.... & I can confirm that TomTom 7 works on all 3 (I have the GPS unlocked on the Mogul).... Just think... 3 phones for your 1... What a great deal
Can someone post the link to the UK version of MSVC? I can't see it at the MS site.
I installed MSVC on my TP2 which led to a hard reset, so I want to be sure that I'm using the right version.
Thanks
"...i have tried loading TomTom 7 once again from the MicroSD card and it wont even load, its just says "this version of TomTom 7 is not compatible with this device" when i click "OK" it just terminates. I dont know what version it is till it loads?"
I've exactly this same problem. Does anybody know how to get around this and get it installed?
Wouldn't you know it. 24 hours of bashing my head against the desk trying to get this to work....I add a message to this board and 10 minutes later it works. Just used 7.915.9196 VGA as pointed out by stunno and remembered to look in program files after it was installed instead of repeatedly clicking on the original installer on the memory card.
alexsimmons said:
Guess what? The TP2 is not listed on the Parrot Minikit compatibility list so may have spent/wasted another £70 today as cant sync the TP2 contacts with the Parrot system which is the same prob i was having with my landrover
Click to expand...
Click to collapse
So strange.
I'm using the parrot CK3100, and that's working fine, out of the box.
Just let the TP2 find the Parrot, 1234 as pin, and the TP2 recognizes it as a Hands-free set.
And it automatically started synchronizing.
My parrot 3200LS will not sync the directory either. It just disconnects the bluetooth device as soon as you tell it to sync. It works as a handfree ok, but its a pain to make calls without the directory.
So, I'm looking for an app that allows me to send and recieve SMS through my PC, with my Dash connected via activesync.
Many people recommend Jeyo, but I want to try another one. Any suggestions?
This is relevant to my interests, seeing as my house is possibly the BIGGEST DEAD ZONE in my area.
Pocket Controller
phuKKah said:
This is relevant to my interests, seeing as my house is possibly the BIGGEST DEAD ZONE in my area.
Click to expand...
Click to collapse
Well, if you live in a dead zone, then you have a slightly larger problem. Just because you can connect to your computer doesn't mean you can do whatever you want.
For instance, I use(d) mDesktop ... awesome app, but what it does is use the PHONE as a "Network Router" (That is my term, basically it will act as a connection to the network) ... so no signal = no signal. The computer will not compensate. If you live in a deadzone, complain to your company and toss around a couple "You know [ANOTHER COMPANY] has great service here and a great price too" if you need to, and maybe the company will get some action done (then again, that isn't all too likely since towers tend to be shared for multiple purposes).
If you live in a dead zone, either complain, or try to find some sort of Online SMS service, because I am positive they exist, or build some sort of amplifier for cell signal (i would check instructables.com).
orb3000 said:
Pocket Controller
Click to expand...
Click to collapse
Thanks!
I've tested it. There's a small issue. It allows keyboard input from the pc but some letters don't work. here's an explanation from one of SOTI's support team:
"we have tested Pocket Controller-Pro with Dash-equivalent devices (HTC-S620 / Excalibur) and it works without any problems.
The problem is observed on devices that are running the T-Mobile branded firmware, which is customized for T-Mobile and responds differently to input compared to devices running a standard firmware (with a standard keyboard input driver). "
I'm curently running 3VO's ROM.. any ideas?
UPDATE: same happens with "MyMobiler"
Cyclonezephyrxz7 said:
Well, if you live in a dead zone, then you have a slightly larger problem. Just because you can connect to your computer doesn't mean you can do whatever you want.
For instance, I use(d) mDesktop ... awesome app, but what it does is use the PHONE as a "Network Router" (That is my term, basically it will act as a connection to the network) ... so no signal = no signal. The computer will not compensate. If you live in a deadzone, complain to your company and toss around a couple "You know [ANOTHER COMPANY] has great service here and a great price too" if you need to, and maybe the company will get some action done (then again, that isn't all too likely since towers tend to be shared for multiple purposes).
If you live in a dead zone, either complain, or try to find some sort of Online SMS service, because I am positive they exist, or build some sort of amplifier for cell signal (i would check instructables.com).
Click to expand...
Click to collapse
Haha I've been *****ing to T-Mo forever about it, but they won't do anything. The best I can do is AIM by adding phone numbers to it, but I would much rather be able to use my wifi and be able to text through my phone. Oh, the downfalls of technology :/
jgrv said:
Thanks!
I've tested it. There's a small issue. It allows keyboard input from the pc but some letters don't work. here's an explanation from one of SOTI's support team:
"we have tested Pocket Controller-Pro with Dash-equivalent devices (HTC-S620 / Excalibur) and it works without any problems.
The problem is observed on devices that are running the T-Mobile branded firmware, which is customized for T-Mobile and responds differently to input compared to devices running a standard firmware (with a standard keyboard input driver). "
I'm curently running 3VO's ROM.. any ideas?
Click to expand...
Click to collapse
Change ROM if you can
Here it´s working perfect
I use mymobile works great
orb3000 said:
Change ROM if you can
Here it´s working perfect
Click to expand...
Click to collapse
how sad is that haha
- Maybe I'll make my own app
If you do it please share it with us!
Its funny that you post this because I recently stumbled upon such a program,
look up : Jeyomobile
its an application that uses microcoft outlook with your active sync its
been awesome, and made it way easier to not only reply to text while im chillen on the computer but also delete **** loads of them.
thanks! but my problem with jeyo is that's not sending sms.. just receiving..
also I would like a stand-alone program and i Think Jeyo is a Outlook plugin. Activesync should consider sms sync and interface
Hello everyone,
I'm having a problem with the RCD 510 Premium Bluetooth kit that is installed on the new VW Scirocco and its been troubling me for over 2 months now.
When I first got my Scirocco the Bluetooth connection was working fine (for 3-4 months). One day out of a sudden the Touch Pro II was not pairing anymore with the car's bluetooth kit.
At the time I was using Windows Mobile 6.1 that originally came along with the phone. I tried the basics - deleting the connection, re-pairing - with no success.
So I gave a shot at phone's factory reset - still no luck. The phone is recognized when I use the "Device Search" function on the car, it prompts me to enter the pass code provided, I do so, the phone loses the GSM signal (which of course is normal) but then suddenly I get a message on the RCD510's main screen "No bluetooth connection to phone" that lasts for about 2 seconds.
Since the problem began, I tried factory reset the phone (as I mentioned before), and tried pairing before installing even a single software, still no luck.
I tried multiple ROM's in the meanwhile (I mean third-party ROMs from this forum) and now I am using the official Windows Mobile 6.5 from HTC for my phone.
I also did many tests using third-party applications for the rSAP protocol (JetWare hands-free extension, SAPSettings, some patches and drivers found around the net here and there) even though there is native support for rSAP since the first firmware that came along with the device.
As I mentioned before, the phone was pairing fine the first 3-4 months.
Please note that this phone uses the Widcomm Bluetooth Stack - not the Microsoft one.
Any help/ideas would be greatly appreciated.
PS: I apologize for the big length of the post, but I believe the more the information I provide, the more the chances to get proper help
Sorry i cant help you but.. I want your CAR...
Any pics?
Well.. try this
Unhook the cars battery. Let it reset the radio (make sure you have the radio code if any) and try again.. maybe the radio is holding some sort of setting. Resetting to default (like with the device) might do the trick..
.
Thanks for the idea. I'm kind of worried though plugging out the battery, because there are many settings besides the radio that probably will be lost if I do so.
You know all these new cars and their complicated electronic sensors...I don't mind losing minor settings for the car that I have adjusted, my main concern is that if anything goes wrong, I will probably have issues with the car's warranty. I still have 2 and a half years of warranty.
I' will probably have a talk with the dealership before doing that.
Many thanks for your thought though
hi i like to know if pairing went okay with the 6.1 rom because if so maybe when you switch back to this rom problems are solved
Nop
Unfortunately no
It was one of the first things I tried. Switching back to the official 6.1 ROM. I actually kept it saved on my hard disk and I tried it a couple of times - I mean when I tried other ROMs from time to time - hoping it would resolve the issue.
And that's the strange of this case. I mean, it was working (pairing) fine the first couple 3-4 months when I unboxed the phone, and then out of a sudden, no pairing.
First logical thought would be that something has changed in the car's settings. But I have an Athena X7500 that pairs fine with the car up to this day. My car's dealership isn't much of a help...
Second thought - phone settings mess-up. But as stated in my original post, no factory reset helped, no switching to other ROMs, no playing around with settings.....
I'm really desperate. I'm thinking to switch to another phone, but besides this problem I'm quite satisfied with the TP2. And I do "need" Windows Mobile based phones, because I sync with Thunderbird's Lightning via BirdieSync for a long time now, and I am not willing to revert back to the horror days of MS Outlook. I carry my TB profile for over 2 years now and its customized the way it suits me for manipulating my 10+ email accounts.
Thank you very much for your reply though
Any other thoughts/recommendations?
i downloaded firmware 1.20 from volkswagen hope this will help me will try tomorrow with my laptop i am with a touch adapter connected to rns 510 no pairing with tp 2 at the moment for me the only workable solution is a duo sim with my old blackberry bold meanwhile i love he TP2 so hope i can get it to pair with my premium touch adapter volkswagen carkit any other suggestion or solutions are very welcome cheers
And that's the strange of this case. I mean, it was working (pairing) fine the first couple 3-4 months when I unboxed the phone, and then out of a sudden, no pairing.
what radio where you on first couple of months
Nice thought about the radio....but unfortunately I don't remember.
Currently I am using v4.49.25.17 that was upgraded with the latest official HTC firmware of WinMo 6.5 if I am not mistaken.
I am 90% positive though that the problem started before even upgrading, back when I was using the first release of WinMo 6.1 and the unknown version of radio, and everything was working ok at the beginning.
I know, I am not helpful at all but frankly, this problem surprises me as much as you.
You mentioned a firmware upgrade - for the RNS right? Not the RCD....
Do you by any chance happen to know if there is a firmware upgrade for the RCD510 and where can I get it from?
Thanks for your help.
looking-g:
I just realized that you are having a problem with the RNS.
Did you had this all along? I mean, did you ever managed to get it working and then it stopped, or you never had it paired?
I am just asking to see if I can be of any help...
well the problem is not with the rns 510 but with the touch adapter which come delivered as premium carkit i use to pair everything with it blackberry,s nokia,s and also a touch dual (niki) without any problem but now with my new phone the tp2 its not pairing it also never did after i fill in the pincode it gives an error message it should connect with the touch adapter my car by the way is a golf gti mk6 cheers, mark
You kind of lost me there.
What do you mean "touch adapter"? Is this a component of the RNS 510? Because I have never heard of it...
Have you determined a solution?
I just picked up a new VW Jetta with premium bluetooth and it worked the first time and not since.....
You guys are scaring me -- I have an Audi A3 TDI scheduled for delivery in January, and it'd be a bummer if its Bluetooth didn't work. FWIW, my current car has a Sony MEX-BT3700U headunit and the Tilt 2 pairs with it in both handsfree & A2DP modes.
3waygeek: You will be probably fine. I think Audi does not have anything to do with Nokia regarding building their units.
Wish you best luck with that.
Extra info
Some more information regarding the whole subject:
I found out that when I press the "Emergency Call" option on the touch screen of the RCD510 (i.e. try to call the international emergency number - 112) and then immediately end that emergency call, the next time I try to pair the Touch Pro 2, it does pair!!! But it has no signal at all, and if you try to make a call you get a "Dial up error" (or something like that, can't remember exactly)!
Any ideas what could be the reason for that?
Thanks.
Your problem is common to VW/Audi's. Chances are the car kits have the rSAP Bluetooth unit. I had exactly the same issue in my A6 using rSAP, as soon as i upgraded to wm 6.5 the problem went away.
Yes, indeed the car kit uses the rSAP profile, as well as the Phonebook Access Protocol (PBAP), but both of these protocols are supported by the TP2. Actually the rSAP functionality I believe is support in Windows Mobile 6.1 and above - I mean besides the fact that your phone's BT radio must support it in order to work correctly. (Without being entirely sure for the above comment).
And some more info for those who are willing to give an opinion:
I did eventually decided to remove the car's battery. I left the car without battery for approximately 40 minutes. Now here's the strange part: All the settings of the card indeed reset (window settings, light settings, etc) BUT the RCD510 was not affected at all by the battery removal! Yes, as weird as it might sound, the station list was there, bass/tremble customizations were there also, everything in place (regarding the radio unit always).
Side note for all those who might remove the battery from a similar VW car:
As soon as I plugged the battery back on, I had somewhere 15+ warning indicators on my dashboard turned on. From ABS malfunctions, air pressure, EPS malfunctions etc. But after rolling the car for 3m or so everything turned off. Back to normal. Probably had something to do with the electronic sensors giving proper signal to the car's "brain". Just my opinion.
Now, besides that - the fact that removing the battery didn't perform a reset of the radio (RCD510) unit, I also tried reverting my Touch Pro II to a WM 6.1 cooked ROM - don't remember which one exactly - but that didn't helped either. Same stupid error message after pairing for 2 secs: "No bluetooth connection to mobile phone".
And to confirm again: My X7500 (Athena) with a cooked WM6.1 ROM from michy still pairs and works fine. (Tested it last night, just to make sure that battery removal didn't had any side-effects)
PLEASE help me if you can. Any suggestion/recommendation will be greatly appreciated.
PS: I decided to contact the car's dealership to inform them about the whole problem. I will post soon regarding how that went...
Thanks for your time everyone...
By the way, does anyone knows the proper way to reset the RCD 510 to it's factory default settings? Besides the function that is given inside the menu itself - I already tried that. I was just wondering if there was a "hidden" way that will entirely wipe all settings/customizations from the unit....
Hi guys! I m in the same situation: Sirocco + TP2 with 6.5 from Orange. Any progress from your side? Ideas would be greatly appreciated!! Cheers, P
Unfortunately!
No friend, sorry. No news yet.
I do keep the post open hoping that someone will give me a new year's present
It's nice to know that I am not alone though