Related
Ok, I am getting increasingly frustrated trying to resolve an issue... my Xda O2 IIs keeps "waking itself up" ....aaaargh!!!
I hit the power button on the top to shut off the display (it saves power and enables me to lock the other keys from being accidentally pushed) but after a very short time, the screen comes on by itself, and I can't figure out WHY!!!!
While just sitting on my desk or out on the road, not in the cradle, I noticed, from time-to-time, that the "G" Icon at the top is often replaced by an "x" and the 'left/right sync arrows' ...so I naturally thought it was trying to connect to something.
I thought it might be trying to connect to GPRS, so I removed the connection. It didn't fix the issue.
I thought it was a Bluetooth File Transfer issue, so I deleted that connection also... still no resolve.
I checked my ActiveSync settings, and it all looks ok.
PLEASE HELP, it's killing the length of life in my battery on a daily basis!!!
i had the same problem when i was on the o2 rom, i sorted it by getting shut of the o2 rom and installing the imate 1.40 rom.... it runs faster,better and never needs soft reseting, with the added bonus of wm10.
but i kinda came to the conclusion that when the fone itself talks to the network every so often, ( ya know when u get interferance when its next to a radio or ur desktop speakers.) as it did it at those times, maybe u should stick it next to something and see if u get the radio interference, and see if it does this in flight mode......
also maybe think about removing the o2 active if u have that, and as a last resort, if no-one else can halp with a fix, maybe think about upgrading to imate 1.40 rom...
Mine did this for a while. I can't remamber the EXACT setting, but it was activesync trying to sync on a schedule (like every 5 minutes) over WAP.
If its the same problem, a bit of rummaging around the activesync settings should sort it out.
-Mike
Thanks joey jojo. Thanks mike freegan.
Joey, where can I get iMate 1.40 ??? Although, I really don't want to use the iMate rom. Ideally, I'd like to find and fix the problem I'm having with this O2 rom.
Mike, I checked my ActiveSync settings on the device... everything looks ok to me. Under ActiveSync/Tools/Options/PC Synchronization: 'Use this PC' is set to ZEUS (which is my computer name) and the other two boxes are UNchecked for 'Use mobile schedule to sync with this PC' and 'Sync with this PC during manual sync' ...then when I click on the Options button, the 'When cradled' dialogue appears, the checkbox for 'Enable PC sync using this connection:' is CHECKED and the connection to use is set for 'USB' . Then, under the 'Mobile Schedule' tab, everything is set to 'Manually'.
BTW, when I put the device in 'Flight Mode' ...it doesn't mysteriously 'wake-up' by itself.
I agree, it appears to be trying to use GPRS to 'connect' or 'sync' with something... I just can't seem to find what or where the cause is located. Aaaargh!!! Any other ideas guys?? Anyone else?
XDA III IIs IIi Waking UP
I've found that if I leave my bluetooth switched on it does this I'd love to have my bluetooth on all the time but as it does this I have it off unless I'm using my GPS.
Can this be fixed ?
Thanks Carl n Adele,
I tried your suggestion, shutting off BlueTooth, but after doing so, and then pressing the power button, the device STILL wakes-up after about 20-30 seconds. So, that wasn't the problem.
Is there any O2 subscribers that can call O2 Tech Support and ask some questions? I'd even call myself if I could pretend to be someone else. Just a thought, if there was anyone willing to help out.
i will try to get u xda support number, i work at o2 so i might be able to ask someone too... tho i guess they wont know, cos there idiots.... lol
I had this problem too. Found that Activesync was still running in the background and was using "mobile schedule" to sync via GPRS (even when set to manual), check that ActiveSync does not appear in the Running program list...
Thanks joey jojo, I really would appreciate the help!
m4ttyw, you are correct, ActiveSync was running in the background. But I had set everything in ActiveSync to MANUALLY SYNC. Nevertheless, I STOPPED ActiveSync in the Running Programs List, then pressed the Power Button again, and with fingers crossed and holding my breath, I waited to see if the device would 'wake itself up' again... and... sure enough, it did. Same thing as always! DAMN! Nice try though, thanks.
This is really frustrating me. The manual shows NOTHING about that Icon at the top if the screen (see earlier message in this thread) and what it is doing, so I can only think that is is still trying to connect or sync something... AAAAAAAARGH!!!!!!
Hmmmm, I wonder if it might have something to do with the GSM Band setting? It's currently set to Automatic, I am not sure what it SHOULD be set to for Rogers in Canada???
Darn think waking up
checked all my settings and its def the bluetooth causing my problems
Not mine, Carl... I have BlueTooth SHUT OFF and the device still wakes up by itself!!!
NEW Observation: When the device wakes-up, it takes about 5 seconds before the "G" icon changes to the 'sync' icon with the 'x' (see pics earlier in this message thread) but, I've noticed that signal strength drops off to nothing except a few dots "..." as if it were searching for a signal. And then, immediately comes back to normal signal strength.
sol
This is sometimes caused by a conflict between ur current radio stack and the frequency ur network is using.
What i mean is, the 'G' icons only represents the availability of gprs in ur current coverage area.By default, ur phone syncs with ur provider every x interval
in seconds, by which the state of gprs availability is changed (Hence,its icon) in ur case, ur pda wakes up whenever ur pda syncs with ur network. A temporary solution would be to choose a network configuration (under settings - connections) which doesnt have a gprs connection. This might, or might not cure it. The best thing to do in my opinion is to change ur current Rom ( or atleast ur radio Rom) that would definately cure the problem.
Try both solutions and post.
Sorry for my worse english.
I met this problem for several times, and it seem to cause by active sync inside the PPC.
I have to connect it to PC and have a Sync Operation,then solve it .
My Device :
Simpified Chinese Dopod 696
The Version Number is fogotten Because I had upgraded it .
Thanks gz_lgz,
I think you are CORRECT!!!! I started to think about what you said in your message, and decided to INSTALL the NEW VERSION of ActveSync 4 on my desktop pc.
After installing ActiveSync 4, I did a sync, removed device from cradle, pressed the power button on the device and waited... and waited... and waited... and waited... and waited... and waited... AND it did NOT WAKE ITSELF UP!!!
It seems there was something happening with the ActiveSync installed on the device that was not working properly and therefore kept trying to sync itself again & again, but since installing the new version of ActiveSync, it corrected the problem.
NOTE: I suppose that uninstalling and reinstalling the OLD version of ActiveSync may have done the same thing... but I never tried to do that.
Nevertheless, I am very happy that it is working properly now!!!
Thanks EVERYONE for your time and patience and WILLINGNESS to help!
Gentlemen,
After upgrading to the latest Dangaard ROM I've got a problem that seems to have the same root cause although the symptoms are slightly different.
If Bluetooth is switched on and my hands-free Logitech is paired with the Blueangel, it wakes up every minute. Once the hands-free is switched off, the device sleeps normally. Another lame thing is if the phone call is long enough for the device to go to the sleep mode (longer then 1 minute in my case), the Bluetooth connection is dropped and the sound is transferred to internal speaker.
There is no need to mention that Activesync is stopped. I'm quite sure that all these problems have something to do with the power management of the device. That's why I'd like to ask if somebody uses any additional software for the power management and if you've got any recommendation on the subject.
Hope it could help us to get rid of the problem. Any help is greatly appreciated. My device details are mentioned in the signature.
PS. Thanks to all the contributors to this wonderful forum. I must admit that the idea of BlueAngel was as great as the implementation sucks...
Update: Check this out: http://forum.xda-developers.com/viewtopic.php?t=21235
I think this workaround is good enough.
just a thought, but open active sync on your xda, and make sure that on the PC tab, the box marked 'use mobile schedule to sync with this pc' is not ticked and the other marked 'sync with this pc durin manual sync' IS ticked
also on mobile schedule tab, all selections are set to manually, and the box marked 'sync outgoing items as they are sent' is not ticked.
dunno if that will help, but its a thought anyway!!!
joey 8)
Guinness said:
Thanks gz_lgz,
I think you are CORRECT!!!! I started to think about what you said in your message, and decided to INSTALL the NEW VERSION of ActveSync 4 on my desktop pc.
After installing ActiveSync 4, I did a sync, removed device from cradle, pressed the power button on the device and waited... and waited... and waited... and waited... and waited... and waited... AND it did NOT WAKE ITSELF UP!!!
It seems there was something happening with the ActiveSync installed on the device that was not working properly and therefore kept trying to sync itself again & again, but since installing the new version of ActiveSync, it corrected the problem.
NOTE: I suppose that uninstalling and reinstalling the OLD version of ActiveSync may have done the same thing... but I never tried to do that.
Nevertheless, I am very happy that it is working properly now!!!
Thanks EVERYONE for your time and patience and WILLINGNESS to help!
Click to expand...
Click to collapse
ah, i didnt read that before my last post, ok, glad to hear you sorted your problem out tho!!!
joey 8)
i get the same problem with mine - ever since i turned my active sync onto manual it started with the problem so i turned it back to automatic.. just seeing if that fixed the problem i've been having..
also Downloading the lastet Active sync 3.8 and see if that helps..
I've figured out that its Sprite Backup Software v3.0 thats causing my XDAIIs switch on all the time. Disabling the Scheduled Backup seems to resolve the problem.
However, I've upgraded to SBSv3.14 which works even without turning off Scheduled backup.
Hope this helps
Hi,
I tried searching for this, but couldn't find anything, so I'm hoping someone here would be able to help out. I currently have a Siemens SX66 ROM v1.40.00 WWE, Radio v1.13.00 ExtROM v1.40.125 WWE
Now, it's strange, but, if I don't have WiFi activated for an extended period of time, and I try to turn it on from the WiFi Manager but what happens is, I'll get that rotating "wait" icon with the colors, and then the WiFi will NOT turn on. However, if I perform a soft-reset (which I don't like having to do, cuz then the "phone" is out of commission until it's back up and running), the WiFi'll be automatically on when it finally loads up fully from the soft-reset.
I don't suppose anyone knows what causes this, and if there's any way to fix this? I'd be forever obliged!!
Thanks,
Quordandis
Hi quordandis,
That sounds like a faulty ROM version. Have you tried a newer or a different ROM version?
Does WiFi work again normally after a hard reset?
I've seen similar behavior on my SX66 with sysrom 1.40. It only started about a week ago, when I was running radio rom 1.12 and extrom 1.40.124 (both of which I'd been running for months). Last weekend, I upgraded to radio rom 1.13 and extrom 1.40.125 -- WiFi works a little better, but it still gets into a mode where it won't connect, and requires one or more soft resets.
The fact that it started only recently suggests a hardware issue -- if it were software, updating the radio & ext roms (each of which involves a hard reset) should have fixed it.
Well, if it is a faulty ROM, then would reflashing the radio rom do the trick? I'm guessing by your question that i may not have the correct radio rom installed. How would i go about discerning which is the correct one?
I don't think it's a faulty ROM. I'd been running the same ROM for months when the problem started, and updating the radio & ext ROM didn't improve things too much.
If you want to get new roms, the SX66 Standardization Project is the place to get them.
I have this problem too on my pda2K. Using the latest ROM build from imate.
My experience and that of others on the forum suggests to me that this is indeed a software/firmware issue.. Most likely a conflict between the radio, bluetooth and wi fi components for the various ROMS in use on the BA. personal experience is that wi fi was just horrible on my original O2 1.31 ROM with 3500 Bluetooth stack, better on the 1.40.176 i-mate ROM, and better still on my current 1.40.923 O2 Asia ROM. So unless I have some kind of self healing hardware built into my device, my money is on the ROM as being at the heart of this particular issue
Regards
Chris
well,to me xda phone r good in reset thats all.
I have the same problem too..
Did a flash of the ROM from the seeo2.com website..
Still happening.. I'll almost bald due to this problem..
Currently waiting for the WM5 to be stable.. before I get myself into more hair loosing project or attempts.
So,
I still don't know what I should do. I originally updated the radio rom from the blue angel standardization site. I don't know what to do at this point. I HATE having to soft-reset every time I want to get WiFi up and running.
The wierd part is, sometimes after it being on for an extended period of time, it'll work fine, and sometimes, it won't...I don't know what to do at this point...
Thanks,
Quordandis
Hi quordandis
How are you turning the wifi on and off? With the green wi fi manager button, or via the wifi/gprs connection Icon thats at the top of the screen next to the signal strenth indicator. Also, are you turning it on and off frequently or just leaving it on all the time?
Regards
chris
Yes, I'm using the WiFi manager, the little antenna icon on the bottom of the screen, when I tap it, loads up 3 options to connect to the internet each with it's own button GPRS, Bluetooth, and WiFi. I would normally tap the WiFi button (the last of the 3) which normally turns on the WiFi antenna, and it begins searching for available wifi networks, but sometimes, i'll tap it, and it'll just stay orange (instead of green when it's turned on). I won't even get an error message or something (which happens sometimes when I try to turn on bluetooth - something about insufficient memory or whatnot - anyone have a solution to THAT too?)
I don't leave my wifi on all the time, as I don't always have a wifi network readily available...
Any suggestions?
Hi quordandis
Give this a try....
1. Move the BTTRey file out of the start folder and into the start menu folder.
2. Go into start/settings/menus and select this file so that it shows up when you drop down the start menu. This will allow you to easily launch bluetooth when you need it
3. Softrest the device. It should restart without the bluettooth icon appearing at the bottom right of the screen.
4. launch the wireless icon at the bottom right of screen and then turn wireless on if it is not already on.
5. From this point only use the GPRS/WIFI icon next to the signal strength indicator to switch between GPRS and WIFI
I believe that there is some kind of conflict occuring between the bluetooth, GPRS and WIFI that is causing this problem.
Give that a try and see if it helps
Regards
Chris
Hi,
I don't understand something. Why should moving the BT tray icon have any effect on my wifi. Would you mind explaining how this would "fix" my wifi refusing to turn on?
The only time I activate gprs, is from the taskbar icon on the top of the screen that's a little "G" otherwise, BT is usually turned on from the BT icon, and WiFi from the little antenna, which really loads up the wirless lan manager that shows me the status (whether wifi is off, or searching, or connected) as well as the connection details like SSID, Tx Rate, MAC address, IP, etc etc
Thanks,
Quordandis
Hi Quordandis
Moving the BTTRay file from the start folder will prevent bluetooth from loading on startup. My personal belief, that I can only validate from annecdotal evidence, is that the combination of bluetooth, wifi and gprs all running at the same time causes some kind of conflicts that inhibit switching between communication channels. By stopping bluetooth, you eliminate one source of possible problems. Now I have no idea if this can be explained in a more technical way, but all I can tell you is that when I operate in this mode, my GPRS/WIFI switching is pretty stable. I have not really looked into why. Just thankful that it is!!
regards
Chris
I had the same problem having BTTray in startup folder and PDA2K unidirectional patch installed.
The way I get back WIFI connecting is :
Start - Settings - Connections
Connections
Configure Proxy server
Check "This network connect to Internet"
Leave "This network connect to internet through Proxy server" unchecked.
This made me the trick to get back my WIFI connection.
I can now play with WIFI again !
I still have BTTray running from start folder.
The PDA2K Unidirectional patch correct the "nosound" problem when calling.
Also, and I forgot to mention, turn on/off bluetooth.
Even worse wifi...
Hi all,
My wifi is even worse than that of quordandis!
The following is the case:
1. I launch wifi manager with the little antenna in the bottom right corner.
2. In the upcoming window (where all th einformation on wifi networks such as SSID, signal strength etc. are shown) I check the checkbox in the upper left corner and hit OK.
3. The little "wait" circle with the colors comes up and rotates, and then just disappears both the wifi manager and the colored circle.
4. The wifi LED (left greenish) starts to blink.
5. However absolutely NO network is found! The little antenna in the bottom right corner has the red line accross it again (wifi off). So I hit the little antenna again, wifi manager comes up and the checkbox in the upper-left corner is UNchecked and it says: "Wireless is off". But the green wifi LED is blinking!
6. I check the box again, hit OK, colored wheel, and then the same happens.
7. I give it a soft reset, it boots up. Green wifi LED is blinking, but no networks are found and the little antenna has the red line across it. I hit the antenna, wifi manager comes up, checkbox is unchecked, "Wireless is off". But the green wifi LED blinks!
8. I can give it as many soft resets as I want, the green LED keeps blinking (until I hard reset the device!!!), but wifi never ever turnes on.
I tried this whole procedure with:
a) 1.22 GER ROM, 1.06 Radio
b) 1.42 WWE (T-Mobile UK) ROM, 1.13 Radio
c) 1.42 GER ROM, 1.13 Radio
and the same (above written) happens. Anybody any ideas?
I bought the device used and wifi has never ever worked for me. Maybe the seller broke it and didn't tell me, but I cannot ask him anymore.
Thanks for any suggestions (I will try disabling BTTray, maybe that will help...)
Cheers,
tomiki
I've had this problem on my XDAiis from the day I bought it - it seems to me that some drivers may not be too well behaved and possibly leave bits loaded, and the useable memory for Wi-Fi and BT drivers diminishes to a point where they cannot load.
I have had the same problem on occasion with BT too.
This only seems to happen after the thing has been running for a while (several days in my case) and I then try and use wi-fi. I haven't been able to fugure how to free up any memory - the supplied memory manager only seems to let you kill applications. On my 9210i, I had a memory manager that would 'compress' the memory and free up all those bits that were left resident from rougue apps and drivers. Need something similar on the BA really....
Since problem is there since i bought my BA last year and this problem is only related to WM2003SE. This problem happens because of lack of ram memory. So when you try to start Bluetooth or Wifi it wont run because of not enough memory. Stopping programs wont help and in most cases you need a soft reset. And i think that problem happens in all Roms.
For this reason i have switched to WM5 even though it is not stable. In WM5 you can switch on/off the bluetooth or wifi without any problems.
Hope this helps.
I NEED A SOLUTION FOR THE WIFI ,NOTHING WORKED!!it works sometimes,,,the problem is the famous problem of starting it,,,the lamp flashes but the tower doesnt show,,,!
i used every known rom and 2003se and wm5 nothing helped it works sometimes and someother times not,,,,,
it needs soft reset sometimes,,,and some times very resistant
my radio version now is 1.15 and 3.5.2 R5 wm5 and still sometimes i can start it and someother times i cant.....is there any fix for that?
i will sell my BA if i cant find one!
lotfytronics said:
I NEED A SOLUTION FOR THE WIFI ,NOTHING WORKED!!it works sometimes,,,the problem is the famous problem of starting it,,,the lamp flashes but the tower doesnt show,,,!
i used every known rom and 2003se and wm5 nothing helped it works sometimes and someother times not,,,,,
it needs soft reset sometimes,,,and some times very resistant
my radio version now is 1.15 and 3.5.2 R5 wm5 and still sometimes i can start it and someother times i cant.....is there any fix for that?
i will sell my BA if i cant find one!
Click to expand...
Click to collapse
I know excatlh the problem you mean as mine has done that for a long time. however, since I flashed Helmi's Wm6 rom mine hasn't done it again. it maybe the fix you need then again it may not depending on your device.
Mine is originally and Orange M2000 and prior to trying Orange's last official rom and t-mobile's latest rom as well it was still doing exactly as you described. make sure your moel is listed in helmi's description of compatable devices. and remember to do pim backup and backup you Storage arear before flashing as it combines internal storage to main memory in the wm6 rom
hope that helps
I just got my BA a few days ago. Did the WM6 upgrade today, and the wlan was doing this.
I noticed that it was happening after I'd sync'd it and the wifi connection was disabled by ActiveSync. I went into the Connection Settings on ActiveSync on my computer (ver. 4.5) and checked the "Allow wireless connection on device when connected to the desktop"
So far, this has worked. I've been able to sync my BA, disconnect, and reconnect to my wireless connection without having to do a reset first.
Nita
wheatfree said:
I noticed that it was happening after I'd sync'd it and the wifi connection was disabled by ActiveSync. I went into the Connection Settings on ActiveSync on my computer (ver. 4.5) and checked the "Allow wireless connection on device when connected to the desktop"
Click to expand...
Click to collapse
This appears to be a bug in the ROM. Activesync on the phone doesn't always realize that the connection is gone and gets 'stuck' in a loop trying to sync to a now-missing computer. Closing activesync on the phone will also clear it and allow the wifi to work after syncing.
i flashed it with wm6 but the wifi probelm still exists,,,only the lamp flashes but no tower is showing,,,,,,,,,,and i tried the wlan manager,,,and the com manager nothing helped
I have exactly the same problem, i think its an hardware error.
the problem started half a year ago with wm2003, yesterday i flashed wm6 but the bug still exists
after multiple switch on-and-off sometimes the wireless works, sometimes it takes just a while 5-10 minutes.
if theres somewhere a solution, please let me know
after a soft reset open CommManager, Setup, Wireless LAN an Select "TURN ON WLAN".
This dont conect.
But, after you do that, you can use te On/Off button of Wifi on te CommMannager with any problem...
You need to do this, only one time after a Soft Reset.
Can this be done via a script, reg key or even a Visual Basic App that opens the Comm Manager and the Wireless Manager and selects these in sequence? I have a profile switching software (PhoneAlarm) and it works a treat all for the activatation of WLAN. Sometimes it works fine, others, it doesn't.
As I am running WM6 and it's lovely undocumented feature (bug) of the time and password both being in volitile memory, each time I take my battery out, I have to rebuild the 'ken device as I cannot unlock the screen. I have resorted to using SPB backup nightly and a reboot after backup (as the device seems to work better with a daily reset (hey, it ain't stable yet - we are still waiting Billy)). This is where the Wireless issue comes into play.
Do I settle for Profile switching with wireless powering on correctly or do I backup my device and ensure that I am not re-imaging the stupid thing every day when I take out the battery! Mobile device - bulldust! Not very mobile when you have to keep it plugged in to ensure the battery doen't run out! My Laptop is more mobile!
jriquelme said:
after a soft reset open CommManager, Setup, Wireless LAN an Select "TURN ON WLAN".
This dont conect.
But, after you do that, you can use te On/Off button of Wifi on te CommMannager with any problem...
You need to do this, only one time after a Soft Reset.
Click to expand...
Click to collapse
no, that doesnt work with my BA
Hello there,
What I Have: Att 8525 Herm100
Rom: Att's Mobile 6
Everything is stock but the extended life battery
The problem I am having is when ever I try to activate my WiFi the phone doesn't do anything. I am not sure if there is a wifi card or not but that's want I want to know. I have tried everything from activating it in com manager to going into the settings and activating it manually and nothing happens it acts like I didn't even hit the button to activate it. Is there a wifi card in the phone or is it integrated on the motherboard in the phone. Note: I bought this phone off e-bay and the wifi never worked when I received the phone.
I am new here and if there is a post about this already I am sorry.
I hate it when that happens.
To begin, there were two ATT OEM WM6 roms relevant to the 8525 that I noticed deep in the bowels of XGA.
I chose the later file (higher revision numbers) I found it here:
http://wiki.xda-developers.com/index.php?pagename=Available Original Shipped WM6 ROM Versions
From comm manager when I click the tower button on within a second the spinning windoze icon shows something is happening. It then starts "sniffing" for my preset wifi connection (ATT supplied 2wire portal 802.11g).
Now, if yours does not show the spinning windoze working icon when you turn on wifi? There obviously is a problem. This could be software, or hardware related (duh). If there is no error message related to "wifi is not an option, unavailable, or screwed" then my first guess is there is something missing or damaged in the ROM update that was applied to your device. As far as I know all 8525 (herm100) were shipped with wm5. It had been mentioned in the volumes of xda that the first AT&T WM6 rom was a little buggy. Try the later released AT&T WM6 update.
It was a run file so no muss no fuss. Sync the phone run the update from the pc, three minutes later the phone is flashed to ATT WM6 professional.
You could take it to a ATT shop? But, I think that without a doubt they would hand it back and say you need a new phone with a 20 year contract and 3g data plan even Obama would blush at.
Try the hard reset. take a picture of the startup screens so you have the numbers and see if the wifi startup is working after the reset. If not then compare the numbers to the above mentioned roms. If the indications are you have the first issue of WM6 from ATT try flashing the second release. If that still fails then your device could indeed have a hardware problem.
The wifi is indeed built into the system and if that chip on the board is not working it could be a overly expensive problem. Possibly a shop has a working board they would swap out cheap? Otherwise, it is a fun phone you can keep notes on, run gps software if you have a bluetooth gps receiver and software like tomtom.
To be honest the wifi on my 8525 has been convenient when around the house to check the local weather radar when I hear a thunder outside, or browse headlines from the porcelain room or even leave messenger turned on incase a gamer friend is looking for someone to get shot up in a game.
I have used the live search voice thing to amaze the neighbors once. But, the limited range of wifi is a real drawback to how truly wonderful that addition could be.
HELP Please! Wi-Fi not working!!!
Hi to XDA all users !!!
MY Hermes - HTC TyTN [Herm200]
I bought HTC Hermes myself year ago.
there was flashed a WM5.0, I've just downloaded from here HARD SPL & WM6,1 (Custom) Flashed.
Wi-Fi will works on WM5.0.
Well here I am at 6.1 flashed and now is not working Wi-Fi. When i pressed Power ON - loading long and nothing happens.
Other methods are also tried on Commanager and Settings - but did not help.
What do I need to do my dear.
HELP!
Thank you for your attention!
Hi Nurk.
Since the wifi worked on wm5 but failed after the 6.1 flash. I would guess the problem is in the 6.1 components. You might start with contacting the kitchen rom you employed for WM6.1 thread and see if this has happened to others. Next step would be to check the radio rom version. I did see on xda an assortment of Radio roms.
If your not totally in love with the current rom you have flashed? Try another 6.1 or even a 6.5 and see whats poppin.
and what you have in HKLM\Software\HTC\CommManager\WLAN\DeviceName?
utak3r said:
and what you have in HKLM\Software\HTC\CommManager\WLAN\DeviceName?
Click to expand...
Click to collapse
I have get this from registry:
HKLM\Software\HTC\CommManager\WLAN\DeviceName - {98C5250D-C29A-4985-AE5F-AFE5367E5006}\TIACXWLN1
Hello.
I'm starting this new thread because I can't find anything similar in other threads.
I've got a brand new htc tp2, bought it a few days ago with official Windows Mobile 6.1 Italian ROM.
Then I updated to the new official Windows Mobile 6.5 Italian ROM from HTC.com and all seems to be OK, except for something strange I guess maybe really a bug of the operating system.
Every time I boot-up or resume from standby, I must reactivate wifi connection manually. The strange is, communication manager says wifi is on, while the wifi activation checkbox in settings page says it's not, and it's really not.
* HTC support sayd it's a system-specific functionality *
Don't joke please, it's really annoying to activate wifi manually every time I bring my phone in the hand, and I wonder why somebody in the development team may want to do something "original" like this.
I've got also a WM5 P3600 and WM6.1 Diamond, and none of them has this kind of issue. And the same was my TP2 befor upgrading to the new ROM.
Now I'd like to know if somebody has seen anything similar and I will appreciate any kind of suggestion.
In 6.5
I agree. Really annoying. Just upgraded to WM6.5 and it has the 'feature' that WiFi has to be started everytime the PPC powers up. Why? Is there a fix?
I think the idea behind this "feature" is that, when Wifi is on according to HTC but off in Windows, the HTC code will automatically turn on Wifi in Windows as soon as a program tries to access the internet. Unfortunately I'm not aware of any way to turn this behavior off. It causes problems in Opera because even after the Wifi is automatically turned on, Opera doesn't notice the new connection and remains stuck trying to load the page. I then have to press Stop and Go or Refresh to get it to use the newly established Wifi connection.
Well guys, I've read some more threads in this forum talking about similar problems (but not the same) and analysed some instructions about modifying registry data.
The idea behind the feature was correct, that is WiFi will remain like sleeping after startup or resume but will effectively activate on-demand when any application will require it to activate.
Now, surfing the registry I've probably found what I was searching for: looking at the key HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\State\Resuming\{98C5250D-C29A-4985-AE5F-AFE5367E5006} I read a default value of 4, which means "OFF", and I modified the value to 0, which is "FULL POWER".
Now my WiFi seems to be fully functional.
Hope this will be useful for you all.
aq71bo;4747347 surfing the registry I've probably found what I was searching for: looking at the key [B said:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\State\Resuming\{98C5250D-C29A-4985-AE5F-AFE5367E5006} I read a default value of 4, which means "OFF", and I modified the value to 0[/B], which is "FULL POWER".
Now my WiFi seems to be fully functional.
Hope this will be useful for you all.
Click to expand...
Click to collapse
I had did that mod and then also did the KeepWiFiOnWhenUnattended mod as well and wifi havent went off yet
Unfortunately didnt work for WWE TP2
Unfortunately this hack didn't work for me. (Official stock WWE WM6.5 ROM).
I applied the Power Fix as outlined above on its own - no joy.
Then additionally did the KeepWiFiOnWhenUnattended key - no joy.
Also changed the other keys in the power group:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Power\State\*\{98C5250D-C29A-4985-AE5F-AFE5367E5006}
to zero as per a Topaz thread that I found.
Still no joy.
This is a very annoying feature of WM6.5 and something that I hope someone can fix soon!
(BTW: On WM6.1 the KeepWiFiOnWhenUnattended Hack used to work on its own. Now KeepWiFiOnWhenUnattended gets reset to 0 on every re-boot or resume from suspend.)
It's just how the Rhodium software from HTC handles the WiFi. If you use a cooked ROM, like mine for example with different software from LEO device the WiFi works as it did in previous devices.
i guess we lost one great hack to 6.5.. its the simple things people never pay attention to and dont try and fix it
Hello
check this out
I hope this will help you too
http://forum.xda-developers.com/showthread.php?t=575256