Related
ftp://xda:[email protected]/Uploads/Universal/M5000ruu.exe
RE
I'm only interested in the radio. Is it stable, louder and better?
If yes, can somebody extract and upload here?
Thanks
Re: RE
FOSA said:
I'm only interested in the radio. Is it stable, louder and better? If yes, can somebody extract and upload here?
Thanks
Click to expand...
Click to collapse
link to the extracted radio ROM can be found on the first post to the thread link below. so far nobody has a concrete example of an improvement. i loaded it last night. no change to test yet.
http://forum.xda-developers.com/viewtopic.php?t=60965
RE
Thanks. Downloading now
Not sure whether it'll work better on my QTEK9000
:roll:
Re: RE
FOSA said:
Thanks. Downloading now
Not sure whether it'll work better on my QTEK9000
:roll:
Click to expand...
Click to collapse
i installed the 1.13 radio along with the latest QTEK ROM.
I've installed radio 1.13 with different ROMs and it always showed a very bad performance in terms of reception quality and GPRS/3G/UMTS functionality.
Reverted back to 1.11 now.
Re: RE
skywriter said:
FOSA said:
Thanks. Downloading now
Not sure whether it'll work better on my QTEK9000
:roll:
Click to expand...
Click to collapse
i installed the 1.13 radio along with the latest QTEK ROM.
Click to expand...
Click to collapse
been a couple of days. i don't notice any change over 1.09, or 1.11.
i use the phone mostly for blackberry email, and web browser. reception is the same.
Re: RE
skywriter said:
i use the phone mostly for blackberry email, and web browser. reception is the same.
Click to expand...
Click to collapse
Did you succeed with BBConnect on Ivan's AKU3.2 ROM ? I cannot make BBConnect run.....
Re: RE
baudy2 said:
skywriter said:
i use the phone mostly for blackberry email, and web browser. reception is the same.
Click to expand...
Click to collapse
Did you succeed with BBConnect on Ivan's AKU3.2 ROM ? I cannot make BBConnect run.....
Click to expand...
Click to collapse
i have not tried Ivan's AKU3.2 ROM. at this point i'm just going to use it as is. it's working fine for me, and i need it stable for work.
i have not been able to get it to work on AKU3 yet either....
SMS - No incoming messages
I post just to alert others to a problem I have just encountered that may, or may not, be attributable to Radio 1.13.00.
Ever the adventurous, I flashed with Ivan's AKU 3.2 ROM and MvRTrue VGA and, I think, everything was working fine. Going a step further I then flashed the Radion from 1.09 to 1.13.
Now I do not seem to be able to receive SMS.
I thought for a while that I had cooked the Sim because I stupidly left it in during the Radio upgrade. But I have now changed the Sim and the same problem persists.
The problem could be 1.13 OR the combination of 1.13 and AKU3.2 OR something else (ie hardware problem) but, in the latter case the coincidence of it occuring at the same time as the ROM upgrades makes me think it unlikely.
I am just flashing back to Radio 1.09 to see if that cures the problem.
Has anyone else seen a similar problem and got any other suggestions?
Andy
Re: SMS - No incoming messages
apbristow said:
Now I do not seem to be able to receive SMS.
Click to expand...
Click to collapse
i have radio 1.13 on QTEK ROM. i am recieving SMS messages fine since the upgrade last week.
Bak on Radio 1.09 and SMS working
Update - Have just flashed back to 1.09 and SMS working OK. So can only conclude that it is 1.13 problem (perhaps just incompatibility with O2??) or incompatibility between 1.13 and O2 SMS Plus app which I use for SMS messaging. Will do further tests - but tomorrow. In the meantime would welcome others' experiences.
Andy
Works fine with T-Mobile Germany
UMTS reception got better (in my room, UMTS from no availability to 2/5, GSM unchanged 4/5)
i'd have to say this seems to be the best overall package i've used (was previously running my own mix of qtek with radio 1.11 and orange ext rom) really fast and no dropped calls as yet. reception much the same but reasonable.
hey everyone i recently purchased a cingular 8525 with wm5 and decided that it would be a good idea to upgrade to wm6 (don't know exactly why but i did it) anywho... after i did so i found out that the wifi does not work anymore and i'm new at this so i have no idea what could possibly be the prob. Before i upgraded the os, wifi worked like a charm didn't really have to configure it or anything just detect settings and available wireless signals etc and that was it. pleeeez ppl who ever knows what i'm talking about please pretty please help cuz this is annoying me
Hi
Which ROM did you upgrade to, also, did you flash HardSPL before that? which Radio ROM are you running, and does the WIFI actually turn on when you use the comm manager?
I upgraded to the WM6 Cingular USA version, I did not flash HardSPL before that. I assume that unless the upgrade from wm6 changed the Radio ROM I am running, I’m still running the same one that comes with the version of wm5 that came with the phone when I bought it (btw what is a radio rom? Sry for my ignorance) And yes the WIFI actually turns on when I use the comm manager in fact it all seems to work fine but I just cant access the internet with it, even though it detects a signal. It stopped working the moment I upgraded to wm6
After flashing roms I had the same problem..make sure under the tab network adapters the line that says My network cards connects to..is set on internet..most roms start out with it on work..that change always works for me
So i deceided to downgrade the rom from wm6 to wm5 and yes apparently it has something to do with the rom version because my wifi connection works again!! with the old version which is wm5, but the moment I upgraded again to v6 it stopped working and like I said everything in the settings seems to be working fine, there’s just no internet, I should just be happy with the old version of windows mobile but version 6 has some features that I really liked does somebody know why this is happening? and if yes is there a solution? It might b more obvious than I think but I really don’t know so I really appreciate those who post help and advise thank you!
Put it back to WM 6.0..we will figure out what is wrong. There are alot of really good people on this forum and the answer to your problem is here. WM 6 is so much better.
Thanx for the support and the advise. So i installed another version of wm6 this one seems to be for Dopod but at least the internet works!!, the one i previously installed was an official version of wm6 for cingular which like i said before, for some strange reason i was not able to use the internet with wifi my only concern with having this Dopod version is that... well... its for the Dopod and does not come with the features that cingular offers to AT&T/ cingular users like myself. But then again it seems like everything else works just fine I just wonder why the cingular version doesn't work?
Sounds like your a little new to this. Here one of the golden rules:check out the hermes wiki and learn alittle about the flashing process and the different roms and their settings. There are alot of good roms out there that set up for ATT users, like K's Rom ,which is what I've been using for months. Works fine right after flashing. It has the right amount of programs and tweaks. Do alittle research and it will be worth it. It may take a couple different roms to find what you are looking for. Make sure you HardSpl your phone(the guide of flashing is in the wiki) Good Luck
i second blackout128's post
read the wiki
install hard spl
flash to your hearts content!
although, make sure you read the threads first! good luck and welcome to hotel d'hermes!
siskus said:
I upgraded to the WM6 Cingular USA version, I did not flash HardSPL before that. I assume that unless the upgrade from wm6 changed the Radio ROM I am running, I’m still running the same one that comes with the version of wm5 that came with the phone when I bought it (btw what is a radio rom? Sry for my ignorance) And yes the WIFI actually turns on when I use the comm manager in fact it all seems to work fine but I just cant access the internet with it, even though it detects a signal. It stopped working the moment I upgraded to wm6
Click to expand...
Click to collapse
Had same problem with WIFI using (RUU_Hermes_CINGULAR_WWE_3.62.502.3_6275_1.54.07.00_108_UOOS_SVN05_Ship.exe) ROM. Had to disable the Cingular proxy. Select: START-PROGRAMS-PROXY MANAGER-DISABLE PROXY. After that, was able to connect to the internet with WIFI.
Source from KingMobile of China:
http://www.kingmobile.net/bbs/viewthread.php?tid=16101
Not try yet. I have uploaded it to minimize hassle.
http://www.mediafire.com/?sharekey=9877bf744e430decd2db6fb9a8902bda
installed, both phone and PDA upgraded.
The speed is much faster as DXHE1 as before.
Does Windows live messenger work? What about port splitter? Is it usable with TomTom7?
WLM works well both wifi and data, sorry Im from HK and we dont use Tom Tom...
hi, thanks for sharing, is it simplified Chinese version ?
Is it running WM6 or WM6.1?
WWE or chinese?
I guess its singapore version, english and support chinese reading only, just like those previous ones. DHXC4 etc...
The speed is much faster, even more than DHXE1..
WM6.0 with WWE
Thanks ~ but after flashed this ROM. MSN cannot connect thought GPRS/HSDPA or Wi-Fi
It pop up error " There's a connectivity program. Make sure you're in an area with good reception and try again " when first sign in,
Anyone have the same issue ?
Thanks
I experienced these before and I thought is MSN problem,
actually is your auto config software problem and I did try.
If u just formatted the rom, use USB or wifi it works...
I use mannual input data and works well.
Please test these again, let data try last thing.
dogmood said:
I experienced these before and I thought is MSN problem,
actually is your auto config software problem and I did try.
If u just formatted the rom, use USB or wifi it works...
I use mannual input data and works well.
Please test these again, let data try last thing.
Click to expand...
Click to collapse
Just installed many program and optimize it .... too bad, if there any other method rather than hard-rest ?
I already retry the auto-config in operator setting and manual enter the AP but it doesn't work
Thanks
Sorry im not expert on this.
This is what I tested and concluded, thats why from now on I dont use auto config.
At least you will see the phone run faster than before rite?
dogmood said:
Sorry im not expert on this.
This is what I tested and concluded, thats why from now on I dont use auto config.
At least you will see the phone run faster than before rite?
Click to expand...
Click to collapse
Thanks ~~ Finally the problem solved after HARD-REST !!
I think this build of ROM have BUG on AUTO-CONFIG.
d3vil said:
Does Windows live messenger work? What about port splitter? Is it usable with TomTom7?
Click to expand...
Click to collapse
no need for port splitter
TT 7 works !
flx872 said:
no need for port splitter
TT 7 works !
Click to expand...
Click to collapse
Guys, why is everyone talking about port splitter ...? I've NEVER used any 3rd party app to get GPS up and running
TT7, GARMIN, IGO8, GPSTUNER, Sygic McGUIDER - all worked on EVERY stock ROM I've had (DXHC4+), including ALL modded EFN ROM's.. and I've always used COM8, 4800 baud..
inertiax3 said:
Guys, why is everyone talking about port splitter ...? I've NEVER used any 3rd party app to get GPS up and running
TT7, GARMIN, IGO8, GPSTUNER, Sygic McGUIDER - all worked on EVERY stock ROM I've had (DXHC4+), including ALL modded EFN ROM's.. and I've always used COM8, 4800 baud..
Click to expand...
Click to collapse
me too...never understood what's this about?
all i had to do is to update the COM port to COM8 in GPS setup.
ried to update the phone part only.. flashing kept hanging in 57%.. hmm hope I can flash my phone part again..
knights191 said:
ried to update the phone part only.. flashing kept hanging in 57%.. hmm hope I can flash my phone part again..
Click to expand...
Click to collapse
I did the same thing (update of the phone part only) successfully.
Phone Firmware version is now DXHH1,
PDA is DXHE1 (EF 3.4U)
May I ask why some ppl just want to upgrade the PDA section only but not whole part?
dogmood said:
May I ask why some ppl just want to upgrade the PDA section only but not whole part?
Click to expand...
Click to collapse
I flashed with EBOOT + PDA + PHONE and didn't found any problem.
BTW, the HARD RESET LOGO was coming back after flashed to HH1 comparing with HE1.
How to enable wifi g ? registry tweak or any other solution ?
seizmos said:
How to enable wifi g ? registry tweak or any other solution ?
Click to expand...
Click to collapse
what rom are you running? most roms these days are capable of getting b and g standards of 802.11
schaps 4.31 wwe full, stable and speed rom , but only wireless b , i have try crcinau rom and he have consist g (coping file with resco file explorer on mapped drive on my desktop PC (file size 100MB) speed is 300-400 KB. on schaps ROM speed is 80-100 KB (100MB file).
thx
well you can make any ROM schaps look and feel, anyway according to this thread there is somewhere on wiki to mod this.
sorry borrow thread... i am using htc latest official rom, i cant seem to get the wifi connected... i am able to on it and connect to my ap but i cant access to internet... any way to solve this?
bigheadchd said:
sorry borrow thread... i am using htc latest official rom, i cant seem to get the wifi connected... i am able to on it and connect to my ap but i cant access to internet... any way to solve this?
Click to expand...
Click to collapse
I experienced that on both Jasjam & TyTn with WM5.0 OS. It seems that I cannot get any fix but when flashed with WM6 it works and much better after I flashed with WM6.1.
hi mck062002, the issue is it's not able to wifi now when i use this "official" htc tytn 6.0 -_-
bigheadchd said:
hi mck062002, mind to tell me which 6.1 rom u flashed? thank you in advance... the issue is it's not able to wifi now when i use this 6.0 -_-
Click to expand...
Click to collapse
it's on his signature, please read this thread to what he's referring to.
http://forum.xda-developers.com/showthread.php?t=412895
HI
i have kaiser 130
I tried few diffrent android version but with evry version phone cant connect to network sometimes he connects for few minutes but not longer. With windows everything ok
I tried:
Incubus26Jc's Super Eclair Lite 2.1
Warm Donut RLS 5 with Kaiser updates integrated including battery
Im using
HardSpl 3.34
radio 1.70.19.09 (tried 1.70.18.02)
Protocol 25.83.40.02h
Maybe someone had same problem and can help me?
Sorry for my english.
i just checked i was editing nbh for Warm Donut RLS 5 with Kaiser updates integrated including battery
and i was using esclair not donut. (dum) Maybe in this is problem....
I has the same problem too ,waiting somebody give a method to solve this
Have you tried an older radio, such as 1.65.21.18?
No because in guide:"How to replace Windows Mobile with Android (Guide)" (sorry i cant paste link because im new user) is recommended 1.70.x and better here it is "#2 Does your Kaiser have a relatively new radio rom? If not then get one. Recommended to have 1.70.xx.xx and up. "
if it is radio fault so why on winMO with same radio working?
And one more thing kaiser with android finds not 02 but BTCellnet (in the beginning O2 was BTCellnet )
The same radio suggestion was made to me several days ago while trying to get audio working in android (via HaRET). Upping to 1.70.xx didn't fix my issues, but 1.65.xx did.
If you are able to test it in WM, you must still have WM installed. Are you booting android with HaRET?
No i think HAret if you installing to sdcard but im installing not in sdcard.
im doing all by this guide go here to read.
xda-developers > HTC Kaiser: Tilt, TyTN II, MDA Vario III > Tilt, TyTN II, MDA Vario III Android Development
> How to replace Windows Mobile with Android (Guide)
Yes, I know the sticky thread to which you have now twice referred. I am asking how you know wifi works in WM if you have replaced WM with android as the guide leads you to do.
There is no danger it trying an older radio regardless of what the guide suggests. I would respectfully suggest that you give 1.65.xx a shot, despite what the guide says. If the older one works, then you have solved your problem. If it doesn't work, you can flash 1.70.xx back on and try something else.
I am running Incubus's Super Eclair on my device and wifi works flawlessly. I am also able to do BT connections and hear audio. None of these worked when I tried 1.70.xx, so I use 1.65.21.18 instead.
em not wifi iwth wifi every thing ok but mobile newtwork dosent work
Roger that. My recommendation still stands, however.
Trying the alternate radio will take you less than 5 min total including d/l time. You can find it linked in post #3 of this thread: forum.xda-developers.com/showthread.php?t=393182.
You could also try 1.71.09.01, which I see was posted several days ago.
thx m8 its working! just signal strength is bad but still....it works! one more time thank you m8!
m8?
What was your solution?
i have a similar problem. Cannot connect to the internet with 2g/3g, but wifi works. The latest rom did not solve my problem. Maybe i'll try older ones...
hi @all,
any news here?
I got the same problem.
At the moment I have running the version milanche has upped, because I thought it is running for him, so maybe it does also for me. but it doesn't.
forum.xda-developers.com/showpost.php?p=6570064&postcount=7
(sorry, as a new user I can't make a link out of this)
Everything seems to be fine except mobile internet.
Edit:
Maybe I should inform you that I already have edited my APN-Settings. And I really think they should be ok. On WM6.1 these settings are working.
And I like to mention that I'm booting from SD.
Kernel may be ?...
Same problem with my phone. I have installed Froyo as explained in another post on my Kaiser TyTNII and everything works perfect except the phone network. I tried already around 5 diferent radios, with NO results.
Do anybody think this issue may come from the kernel instead ?
Using the "kaisimg-panel2-240x320-2.6.32-tilt-froyo-06-09-10_22.nbh" on my phone.
Thank you.
I have a problem with an i-mate K-JAM ... Some time ago I got this ppc but I went I installed a program and got stuck. Windows and the currency we now find no signal at all looking and looking and still not know what does. please help me
orcatrainer said:
Same problem with my phone. I have installed Froyo as explained in another post on my Kaiser TyTNII and everything works perfect except the phone network. I tried already around 5 diferent radios, with NO results.
Do anybody think this issue may come from the kernel instead ?
Using the "kaisimg-panel2-240x320-2.6.32-tilt-froyo-06-09-10_22.nbh" on my phone.
Thank you.
Click to expand...
Click to collapse
same issue.APN data not working
Incubus26Jc's Super FroYo RLS15
radio 1.65.16.25
kaisimg-panel2-240x320-2.6.32-tilt-froyo-09-09-10_21.nbh
possible solution
I,m started MODEM application,tapped Connect-and looks like APN now working!
Let's see how long it works for you. I have the same setup as orcatrainer but mine works off and on some times. I must add, I have Simple Mobile. They are on the T-mobile network therefore, I cannot access 3G on my tilt. Playing with the 2G setting usually cause my phone to connect to APN until I turn the phone off. Then I have to struggle to get it to work again. I just put my sims back into my Blackjack 2 to access mobile data until this issue is fixed.
illegal2008 said:
I,m started MODEM application,tapped Connect-and looks like APN now working!
Click to expand...
Click to collapse
Hi there, I don't understand well what you did on your phone which made it work. Under which section you can find "modem" application ?
Thanks.
orcatrainer said:
Hi there, I don't understand well what you did on your phone which made it work. Under which section you can find "modem" application ?
Thanks.
Click to expand...
Click to collapse
in applications section-not in settings