Develop Bugs

can i use artemis external gps on my laptop

hi
when i bought my artemis, it came with an external gps receiver which i have never used because the internal gps is doing it for me... i have microsoft streets and maps on my laptop and it would be great if i could connect the external gps that came with my artemis...
the connector is called MS-147-C(LP)-2 and it looks like in the picture
i hope some1 can answer me this time

Removed (mis-read the question!)

What you have got on the picture is only an External Antenna. It is NOT a GPS receiver. It is used to only boost the signal in poor conditions (ie in a vehicle).
There is no way to directly connect this Antenna to a PC/Laptop. You will need a real GPS receiver (PCMCIA/ExpressCard/USB) and if you buy one - you will (most probably) not need the Antenna.
On the other hand you most probably do not need it anyway. You can use the GPS receiver on your Artemis and share it (over USB/bluetooth) with your laptop.
There are already lots of threads and guides here. Just search!
Keywords: share GPS splitter gpsproxy gpsgate bluetooth
Good Luck !

weak wifi signal

bought wave II s8530 a month ago and when wifi is ON the signal strength is 40-70% even i am in front of wireless router, and if i go in another room the signal is loosing or barely gets 10%. i had nokia e72 before and in front of wireless router i got 100%, and in another room like 50-80% of the signal, so its not the wireless router.
if its for help i flashed team elite 3.0 for this device, but the problem persist before i flash.
i spotted today if the bottom of the wave is showing to the router i get 95% wifi signal, if i change that position i get 40-60%(every refreshing is different value). the results are from BadaSI.
other information, GSM, GPS and BT are with no problems-no weak signal.
sw ver: s8530xxlb1 and csc ver: s8530xenlb1
please someone advice me how to solve this problem. tnx

hello
I am afraid, we have to live with this problem. almost every wave phone has this problem.
So far there is no solution to it.
if anyone knows it please let us know.

Maybe difference between bada 1.x and bada 2...
Because I have same problem...
Will investigate...
Best Regards

I know that modder psycoy, in his custom (here) made something; this is changelog:
Exclusive Patch WiFi/Data booster
But I don't know what he do!

watch to /SystemFS/Driver/ directory, here you can find hardware settings into .txt files for wlan, camera, bluetooth, speaker.. etc

i am noob with this so please tell us what to do.
i found that folder with stune, and i see these files.

guari said:
watch to /SystemFS/Driver/ directory, here you can find hardware settings into .txt files for wlan, camera, bluetooth, speaker.. etc
Click to expand...
Click to collapse
Thanks, but I compared them with WinMerge and they are the same

mm... when I search for hardware settings I found them only here...
alternatively it could be replaced the wifi related .so driver file with one more performing of another firmware version (if exists)..
anyway, in case of bad wifi signal, be sure that your are assigning the correct ip address to your wave (not one assigned to other network components..) and that your network is on a low used channel..
the percentage value reported by bada API could be wrong like eg. the battery percentage (as the one read by badaSI), with my S8500 I can connect to my router (G protocol, not even N) up to 10-12 meters of distance through multiple rooms.
Other solution to improve connection speed/stability can be by tweaking the TCP/IP parameters by forcing the protocol to be more agressive but I don't know how doing this on bada..

this is the wifi drivers files
bada 1.2 and bada 2.0

Thanks guary! However there aren't .so files in psycoy lupin III CFW (I don't find them). It's so strange

galaxy nexus gps not working propertly

After I drop my cellphone gps can't connect properly and gps icon is blinking all the time, like is not connected, but gps can locate my location around 3,4 km approximate and shows route but not exact location where I am. I also try install new software but same thing.
Any solutions? thank you

Do you make sure to have WiFi on when using GPS? I believe WiFi being on helps it to be more approximate and closer to your exact location.
Break me off a piece of that Kit-Kat ROM!

No, that is not a problem. Anyone know where is gps antenna so I can maybe unplug and plug it again, or maybe if i can order new gps chip, if is not integrated on mbo?

wyru5 said:
No, that is not a problem. Anyone know where is gps antenna so I can maybe unplug and plug it again, or maybe if i can order new gps chip, if is not integrated on mbo?
Click to expand...
Click to collapse
It's definitely integrated and soldered. See step 12.
http://www.ifixit.com/Teardown/Samsung+Galaxy+Nexus+Teardown/7182
You might have damage to your mainboard rather than the GPS tracker unless you damaged it in a way that directly hit the chip.

Thank you, then is probably damaged. I was thinking there is gps antenna which is connected to mbo somehow, but looks like only gps chip on mbo and no antenna for gps. So there is now way to fix this):

Problem with WiFi

Hi,
I have problem with Malaysk ROM. I have 3 units....
1. KLD for RAV4
2. KGL for Zafira
3. KLD 2DIN (for now with stock ROM)
All are QuadCore unit 1024px.
Problem is with WiFi after update from stock to Malaysk ROM.
Problem is only with some Phones. For Example my Lenovo VibeShot don`t work. My wife Lenovo k3Note (MIUI) works great. Sony Z3 works. Iphone 5s dont work with Hedunit.
HeadUnit see Wifi hotspot. I can write password. But when is connecting signal strenght drop to one line and couldn`t connect.
I record screen from test. Problem is on KLD and KGL then it`s not hardware problem.
youtu.be/DgfRLAIqUfo
I test Hotspot on laptop and works great on my phone and this Iphone 5s.
Please help me. I want flash 3th unit but dont want loose Wifi
Best Regards
Tom

Edit: Today I install Malaysk ROM on 3th 2din unit. Problem also exist but HU connect to Hotspot itself for about 1-5 minute. When i click manually "connect" effect is the same as on 1th and 2nd unit. Range drop down and couldn`t connect.

I've noticed the same on mine with a mifi device - wifi seems to drop everynow and then,

Hi,
Same issue, latest Malyask ROM (28 Dec?).
Can see hotspot, but does not connect, tries and constantly drops back again.
Checked password is fine.
Phone is Nexus 6P, 6.0.1.
Cheers

jupi83 said:
Hi,
I have problem with Malaysk ROM. I have 3 units....
1. KLD for RAV4
2. KGL for Zafira
3. KLD 2DIN (for now with stock ROM)
All are QuadCore unit 1024px.
Problem is with WiFi after update from stock to Malaysk ROM.
Problem is only with some Phones. For Example my Lenovo VibeShot don`t work. My wife Lenovo k3Note (MIUI) works great. Sony Z3 works. Iphone 5s dont work with Hedunit.
HeadUnit see Wifi hotspot. I can write password. But when is connecting signal strenght drop to one line and couldn`t connect.
I record screen from test. Problem is on KLD and KGL then it`s not hardware problem.
youtu.be/DgfRLAIqUfo
I test Hotspot on laptop and works great on my phone and this Iphone 5s.
Please help me. I want flash 3th unit but dont want loose Wifi
Best Regards
Tom
Click to expand...
Click to collapse
Same here. I'm running latest Malaysk ROM (Jan 2016) on AN RK3188 1024X600 JOYING (JOYOUS) heading. WiFi was ok for bench testing but it will connect with full bars then drop after a short time (30s-3min). Not sure how to fix it because for a week it was fine... Won't connect to home wifi (in the house beside my computer) or my iPhone 5 hotspot 5cm from unit. Anyone have some ideas?

On my GA2114 WIFI sometimes wifi doesnt turn on at all
relevant ??

newt_dunbarton said:
Same here. I'm running latest Malaysk ROM (Jan 2016) on AN RK3188 1024X600 JOYING (JOYOUS) heading.
Click to expand...
Click to collapse
Same here on an RK3066 with latest Malaysk ROM.... first connection was fine. Then after 2h and 300km drive dropped the connection and no way to reconnect. Tested on Sony Z5 compact, Acer Z103 and iPhone 5s. Connection to regular APs works fine (McDonalds, Homerouter).

same for me. but my wifi disconnect from AP and don't connect after few minutes of working FM Radio

same here s07 mtcb-mx-v2.72 rk3066
everybody posting their wifi problems. no one can solve this????
i found something else.
yes hotspot alwasy drop connection. reconnecting is very hard. turn off wifi. turn off hotspot. turn on hotspot. turn on again wifi from unit. it will connect.
but after a while connection icon goes to dark. on unit if you check connection it looks like connected. when i check my g3 phone, no any machine connected. it shows 0/8 (0 connected in 8 machine).
i drive car to my workplace and parked close to door. when i connect to my modem no any problem left. it is connecting, connection is not drop, when i start car it is auto connecting. everything is looks like fine.
is this machine have problems with hotspot internet?
what is going on?
so we need real help. please hear some one here. thank you.

Have the same issue. Problem started after updating to FUSE technology on Malaysk ROM. WIFI drops connection after few minutes of using. Not sure if it can be fixed by ourself. It should be reported to Malaysk.

On Malaysk ROM 02-07-16 (version 2) on RK3188 800x480 HZC. Had the drop out issue on the stock android 4.4.4 but also on Malaysk ROM - very, very weird indeed... Would nive to have it fixed.

Hi mas618, did you get an solution. Got the same "wifi drop issue" with stock ram and also with malaysk rom.

Same to me. Any fix available?

Wifi corrected
Hi
Finally i found problem. Thank me if it is useful.
Problem is not software problem. It is just harware problem
I just take out unit from car. Opened 2 screws top of dvd and removed metal lid.
Wifi cable has 2 wire in 1 wire. Middle is the + outside wire is ground. So both is soldered very badly to signal point. I was able to solder ground side to ground but i just changed wifi antenna with wire from laptop antenna.
You can just solder it. Or you can chane it.
In first picture you can see very bad solder.
In second picture you can see new antenna with wire soldered.
You can solder outside wire any place of ground.
My wifi is now very good works. Not drop anymore. And bluetooth audio is not drops too.
I saw the cpu is not have any cooler. The last pictures show cooler is planted to rk3066

Problem with GPS signal - external GPS BT?

Hello
In my Rk3188 (KGL) device I have problem witch poor GPS signal. I can get only one satellite and signal is weak. I try different ROM and MCU and no solution. The antenna connection looks good.
Can I use external BT GPS device witch this unit or it is impossible due to Bluetooth limitations? Thanks for help.