Auto mobile data setting config on tilt2? - Touch Pro2, Tilt 2 Windows Mobile General

When I was using X1, whenever I insert different carrier's sim, X1 will wait a little and auto config all the seetings needed for mobile data.
AT&T's Tilt2 however does not do this, and as I travel alot, manually inputting every settings a much trouble.
It there a way to make the tilt2 able to auto config again?
Reg edit? a cab? or flash a custom rom?
Thanks in advance.

Nobody knows?

Ashwm said:
Nobody knows?
Click to expand...
Click to collapse
yes if you flash a custom rom it will detect a new sim and config for new sim

Mine "just works". I plug in my T-MoUK sim, and it reconfigs. Revert to the ATT-US sim, and it reconfigs again.

Related

[Q] Utter n00b

Hi guys,
as much as i am an advancer user when it comes to doing stuff on android devices that with winMo i don't know what to do. I have read twice the reference thread with all the instructions but i am still lost, i don't understand everything. If someone could direct me to a IRC chat where someone could guide me step-by-step or someone is willing to spear some time and stay with me on a GTalk that would be awesome. Either way please direct me to someone, or a place where i could get a live help.
Thank you all in advance.
Regards
Kirior
You haven't even asked a question here.
What are you trying to do?!?
uh Sorry
I am trying for the first time to change my ROM. I could read about HardSPL but in the guide there are something about some tickets from htc and some files from Microsoft website. Should i download it on my PC on my mobile how to flash it what to do with those files and this HTC thing. Generally how to bite these things. Do i have to be plugged in USB or no and so on so on.
I read it twice but i am still confused
kirior said:
uh Sorry
I am trying for the first time to change my ROM. I could read about HardSPL but in the guide there are something about some tickets from htc and some files from Microsoft website. Should i download it on my PC on my mobile how to flash it what to do with those files and this HTC thing. Generally how to bite these things. Do i have to be plugged in USB or no and so on so on.
I read it twice but i am still confused
Click to expand...
Click to collapse
HSPL you flash from ActiveSync. So get the phone sync'd, then run the HSPL installer (make sure you get the right one for your device!!)
Then, once you've flashed HSPL you can flash any ROM - either via SD or USB/ActiveSync.
ok that clears things up. Now the HSPL i get from htc website? and on the tutorial here http://forum.xda-developers.com/showthread.php?t=550540 it says to download a file If you have Vista or Windows 7, update WMDC to v6.1 *HERE* first do i download this to my phone or pc and flash it with active sync?
kirior said:
ok that clears things up. Now the HSPL i get from htc website? and on the tutorial here http://forum.xda-developers.com/showthread.php?t=550540 it says to download a file If you have Vista or Windows 7, update WMDC to v6.1 *HERE* first do i download this to my phone or pc and flash it with active sync?
Click to expand...
Click to collapse
Do you not read?
mskip said:
Flashing via ActiveSync with USB Lead (thanks to OliNex)
1. Download HardSPL package from *HERE* and extract to an empty folder
Click to expand...
Click to collapse
You should probably go back to that thread and try clicking the *HERE* link...
Honestly the "Flashing via ActiveSync with USB Lead" is really quite straight forward.
yes i got that part now, i guess i must be tired so the information didn't go to my brain as they should.
I got the HSPL now successfully and would like to ask you a question.
What ROM would you recommend? I am currently browsing the thread with all the ROM's, as well as each separably.
Thank you very much for your help and mainly patience.
Regards
Kirior
kirior said:
yes i got that part now, i guess i must be tired so the information didn't go to my brain as they should.
I got the HSPL now successfully and would like to ask you a question.
What ROM would you recommend? I am currently browsing the thread with all the ROM's, as well as each separably.
Thank you very much for your help and mainly patience.
Regards
Kirior
Click to expand...
Click to collapse
np, as with anything new take it slowly, one step at a time...
Anyhoo, I like EnergyROM - but I don't really use WinMo anymore. I love Android too much . I use the Titanium version of Energy so I can quickly get into Android. That's all WinMo is for me anymore... a place to launch Android.
hi again all
so i unlocked my sim stick my 3UK sim and no signal. Got this ROM Jackos EVO JackFULL 1.5.0 with recommended radio. Now my question is how do i make my sim work? should i change radio to the recommended on wikipedia or maybe change to a different rom? Can anyone please help me with that?
Thanks for looking and any help.
Regards
Kirior
kirior said:
hi again all
so i unlocked my sim stick my 3UK sim and no signal. Got this ROM Jackos EVO JackFULL 1.5.0 with recommended radio. Now my question is how do i make my sim work? should i change radio to the recommended on wikipedia or maybe change to a different rom? Can anyone please help me with that?
Thanks for looking and any help.
Regards
Kirior
Click to expand...
Click to collapse
Did you unlock the SIM slot?
I know on the RHOD400/500 there's a SIM unlocker tool. I don't know if it applies to other RHOD's or not...
Update:
"Q6. Is there a SIM Unlock tool (or any other kind of paid service / hack) available to make this phone compatible with the US GSM service providers?
A. YES YES YES! Olipro and Cmonex have made this happen for real. Works with all CDMA Rhodiums."
Only applies to the CDMA RHOD's it seems. The GSM-only variants shouldn't need the SIM slot unlocked in any way shape or form.
hi
so does that mean that i will be forever unable to receive and make calls?
I have tried with my o2 UK sim card and funny enough i have a data connection but not signal. I can browse internet and stuff but cannot make any calls. With my 3UK card i have nothing. No data No phone calls. Is there a way to fix it or i basically just **** my phone up by taking simlock off?
I got it on ebay and it was locked to Orange. Before i flashed ROM i put my sim and entered the code to unlock the sim. If that was a mistake is there a fix or patch to help me out?
Please help me.
Regards
Kirior
kirior said:
hi
so does that mean that i will be forever unable to receive and make calls?
I have tried with my o2 UK sim card and funny enough i have a data connection but not signal. I can browse internet and stuff but cannot make any calls. With my 3UK card i have nothing. No data No phone calls. Is there a way to fix it or i basically just **** my phone up by taking simlock off?
I got it on ebay and it was locked to Orange. Before i flashed ROM i put my sim and entered the code to unlock the sim. If that was a mistake is there a fix or patch to help me out?
Please help me.
Regards
Kirior
Click to expand...
Click to collapse
So this is a GSM-only RHOD? RHOD100 I'd guess?
If so, there's no reason to unlock the SIM slot on the device itself AFAIK. You would only need to unlock the SIM card itself.
I'm by no means an expert here, but based on what I've read the only SIM slot that needs unlocking or is even unlock-able on the RHOD is the CDMA variants (which both have SIM slots for GSM as well).
Sorry, maybe someone with some more knowledge on the GSM variants will respond.
Yes it is RHD100,
Before reading your posts i have already unlocked my sim slot as i was trying to use my 3uk sim in orangeUK handset. Usually in all handsets so far that was the way to use different sims. If what you say is true what are my options now?
To bump up my thread and question
After not much luck trying to fix it i still have a device that have no signal.
I have tried ROMs Radios flashes and all i could think of.
i have checked and the only way for me to use my phone was to unlock it via unlock codes. But since that day i have no signal what so ever.
I am willing to send my phone to some one for repair if you think you have a clue.
If you have any ideas how i can do it on my own please let me know as well as i really would like to use this. I know it is old and stuff but still would be nice.
Anyhow if you need more answers or info of what i have tried and done do not hesitate to contact me or reply here.
Regards
Kirior
You're sure the hardware supports the bands you require for your provider?
Like arrrghhh says if your Rhodium supports the frequency bands for the provider you are trying to use it on then it should work. I suggest you talk with your 3UK tech support and give them the model # and see if you need a specific type of sim card for it to work or any suggestions they might have.
HI,
Thanks for your input. I know that it used to work on Orange UK network before taking sim lock. Usually most of UK devices worked together, especially that 3 UK have a partner agreement to use Orange network if you loose 3 Network. So it should work. I will give them a call and report back.
Kirior
Edit:
So the guy said that because my sim works in other handsets it must be a software/hardware and sim issue. He could not check it more as it was not a 3 handset so they don't bother. They, as a network, used to have a agreement with all the network to roam between each other, so that would mean that freq are same in all UK. I am running out of options. Any one willing to fix/help with it?
Edit 2:
Went to an orange shop on my way to work and tried one of theirs sim card. Handset worked flawlessly. My guess now is something went wrong with unlock maybe, or my sim is really incompatible with handset. Any ideas how to resolve it?
Thx in advance.
Kirior
kirior said:
HI,
Thanks for your input. I know that it used to work on Orange UK network before taking sim lock. Usually most of UK devices worked together, especially that 3 UK have a partner agreement to use Orange network if you loose 3 Network. So it should work. I will give them a call and report back.
Kirior
Edit:
So the guy said that because my sim works in other handsets it must be a software/hardware and sim issue. He could not check it more as it was not a 3 handset so they don't bother. They, as a network, used to have a agreement with all the network to roam between each other, so that would mean that freq are same in all UK. I am running out of options. Any one willing to fix/help with it?
Edit 2:
Went to an orange shop on my way to work and tried one of theirs sim card. Handset worked flawlessly. My guess now is something went wrong with unlock maybe, or my sim is really incompatible with handset. Any ideas how to resolve it?
Thx in advance.
Kirior
Click to expand...
Click to collapse
Did you try to manually choose a network?
kirior said:
Edit 2:
Went to an orange shop on my way to work and tried one of theirs sim card. Handset worked flawlessly. My guess now is something went wrong with unlock maybe, or my sim is really incompatible with handset. Any ideas how to resolve it?
Click to expand...
Click to collapse
So there's no problems with the device, the problem is with your SIM. Sort that out.
ccengineer said:
Did you try to manually choose a network?
Click to expand...
Click to collapse
Yes i did, as well as automated process as soon as you enter new sim.
arrrghhh said:
So there's no problems with the device, the problem is with your SIM. Sort that out.
Click to expand...
Click to collapse
May be, but my sim works in all sort of different devices, it is just this one.
I was wandering as well, maybe if i would come back to stock RUU for Orange UK maybe than it would work? But i cannot seem to find it anywhere :/

Get internet sharing and MMS working on unlocked Rogers (and AT&T?)

I finally got my internet sharing and MMS working on my unlocked Rogers Lumia 900 running on Bell. Earlier this week, I came across this page. http://forums.wpcentral.com/lumia-900/197920.htm. If you follow his instructions (minus the unplugging the cable during the rom flashing), you should have working internet sharing and MMS without having to input any APN settings. The first time I started it with the TelCel rom, I still had to input my APN to get data to work. Then I performed a hard reset by holding volume down, power, and camera buttons. After that, it picked up the correct settings from the sim card and everything works as it's supposed to. The only downside to some people is that now instead of showing "LTE" in the status bar, it shows "4G" and instead of "4G" when you are on the HSPA network, it shows an "H". I think this is a truer representation of the network you are on anyways since HSPA isn't a true 4G network like the American companies would have us believe.
Please note that if you are going to do this, you will lose any unsynced data on your phone and will also have to reinstall all your apps so backup what you need to.
deleted
Seems interesting. I will wait for the 7.8 version to come out. I wouldn't want my phone to be stuck at 7.5 for some reason after trying this.
pmcelreavy said:
Seems interesting. I will wait for the 7.8 version to come out. I wouldn't want my phone to be stuck at 7.5 for some reason after trying this.
Click to expand...
Click to collapse
If for some reason it doesn't update to 7.8, you could always just flash the stock Rogers rom back to your phone and then get 7.8.
Sent from my RM-820_nam_att_100 using Board Express
Have no problem with 4G, sharing and MMS on original AT&T firmware (using my lum with Europe operators).
Could it be a SIM card flag that prevents the sharing, the euro ops SIMS dont have it
Could it be a SIM card flag that prevents the sharing, the euro ops SIMS dont have it but the NA ops do?
valuxin said:
Have no problem with 4G, sharing and MMS on original AT&T firmware (using my lum with Europe operators).
Click to expand...
Click to collapse
sa-10 said:
Could it be a SIM card flag that prevents the sharing, the euro ops SIMS dont have it but the NA ops do?
Click to expand...
Click to collapse
May be, may be... But I had problem too with this features, when it worked on a 1st firmware (flashed by AT&T, not by me). Then I decided to flash it on my own via Care Suite (had flashed the earliest firmware, then updated via Zune). Now it works without any problems. After flashing try to not use the Nokia's Network Setup. If sharing would be OK, you could install NNS on your choice
It works for me after doing a hard reset with t) mobile, if I run NetworkSetup then it stops working. If I insert my att sim then it also stops working.
Sent from my RM-820_nam_att_100 using Board Express
One more datapoint...
Recently unlocked, using Taiwan Cellular unable to tether.
Before installing Network Setup receive message: no data connection found...
After installing Network Setup, "to enable tethering on this device, go to att.com...".
Same SIM card in HD7 allows internet sharing... no problem. So it's not the SIM.
On HD7, data connection shows "H" but on Lum900 showing "4G"... (not a problem, just observation)
Have hard reset with Taiwan SIM, no joy. Reflashed using Nokia Care Suite... same results.
1. It's clear, stay away from Network Settings app. Even overriding APN settings results in same bogus ATT message.
Any point in flashing a pre-8779 rom? One of the TelCel MX or Claro LTE roms?
To flash another RM808 carrier's rom on top of an ATT RM808 device, is it a straight flash with NCS or need to rename files?
deleted

[Q] foregin sim card not prompting unlock galaxy s2 t989

I'm trying to unlock my phone, I bought used on ebay, I found found a thread here that shows you how to unlock, but can't even do the first step. when I install a different sim card, I don't get the message Unlock, the phone reads the sim as a non support sim.
the sim I'm putting in the phone doesnt have service on it, Is this the reason the unlock message doesn't come up?
Please Help
Maybe your phone is already unlocked
Sent from my SAMSUNG-SGH-T989
Not sure
cricketAC said:
Maybe your phone is already unlocked
Sent from my SAMSUNG-SGH-T989
Click to expand...
Click to collapse
I put a metro pcs sim that has service on it, but when I try to make a call, it say, not register to network, and or mobile network disconnected? Aso also tried to put the apn setting, but when I try to save the apn setting, they disappear??
Anyone have any idea?
Thanks for the reply
you can use free unlock from general http://forum.xda-developers.com/showthread.php?t=2024514
but of course you have to do it from uvkl1. but--you can do a nandroid, and after you unlock it, restore your backup! it will stay unlocked
juna1103 said:
I put a metro pcs sim that has service on it, but when I try to make a call, it say, not register to network, and or mobile network disconnected? Aso also tried to put the apn setting, but when I try to save the apn setting, they disappear??
Anyone have any idea?
Thanks for the reply
Click to expand...
Click to collapse
Seems your phone's ROM/Radio mismatched or not for MetroPCS. This exactly happened to my phone also, until I flashed a new radio for my rom(I am using TMobile, flashed new TMobile ROM but not new Radio. Then it had the problems as you have now).
New sim fixed
cr2069 said:
Seems your phone's ROM/Radio mismatched or not for MetroPCS. This exactly happened to my phone also, until I flashed a new radio for my rom(I am using TMobile, flashed new TMobile ROM but not new Radio. Then it had the problems as you have now).
Click to expand...
Click to collapse
'' Thanks for the reply ''
The sim card I was putting in the phone was already register to a different phone.. I had to put a new sim, not active yet, then register the new sim to my imei and it worked fine.. I bought the phone used from ebay and it was already unlocked..

Need help unlocking LG G2 LS980 flashed to boost mobile.

Hey, I just need someone to point me to the right direction.
I bought my LG G2 off ebay last year, it came flashed to boost mobile. All I need to do is flash it back to sprint and unlock the GSM on the phone.
I just found this forum and don't know where to start in this process..
Im on 5.0.2
Software version LS980ZVI
Model # LS980
Thank you if you can help
this thread has everything you need
http://forum.xda-developers.com/sprint-g2/general/ls980-lollipop-update-root-sim-unlock-t3357837
After you install TWRP successfully but before you unlock the sim card, You can install the latest version ZVI that is already rooted
http://forum.xda-developers.com/sprint-g2/development/rom-ls980-stock-5-0-2-zvi-flashable-t3303163
for unlocking the SIM card I would use this procedure instead
http://forum.xda-developers.com/sprint-g2/general/ls980-lollipop-update-root-sim-unlock-t3357837
Thank you !!
Since you are on ZVI already, you could try the steps in this thread
http://forum.xda-developers.com/sprint-g2/general/how-to-root-zvi-install-twrp-t3410650
tekweezle said:
this thread has everything you need
http://forum.xda-developers.com/sprint-g2/general/ls980-lollipop-update-root-sim-unlock-t3357837
After you install TWRP successfully but before you unlock the sim card, You can install the latest version ZVI that is already rooted
http://forum.xda-developers.com/sprint-g2/development/rom-ls980-stock-5-0-2-zvi-flashable-t3303163
for unlocking the SIM card I would use this procedure instead
http://forum.xda-developers.com/sprint-g2/general/ls980-lollipop-update-root-sim-unlock-t3357837
Click to expand...
Click to collapse
Hey I did all the steps and got it unlocked but I cant to get my simple mobile sim card to work.
When I select the network mode global I have full bars, but when I try gsm/umts all my bars go away.
The phone is reading the sim card, but im not able to make calls/text. I Also get a authentication error when I try to update the prl/profile settings
did you do the twoclick procedure to unlock the sim card?
did you edit your apn? from the dialer, dial ##3282#
i am on freedompop so i changed my apn to freedompop.foggmobile.com. Simple mobile might require it to be mvno.att.net or something like that( i used that for airvoice).
tekweezle said:
did you do the twoclick procedure to unlock the sim card?
did you edit your apn? from the dialer, dial ##3282#
Yep I did the two click method but on both of my sims my phone refuses to connect/ find networks. I get emergency calls only.
I used a freedompop sim too and changed my apn to freedompop.foggmobile.com. but it still wont connect to the network. When I go into the freedompop messenger app it says. I dont have any data.
Click to expand...
Click to collapse
that;s strange. It worked for me as soon as I added my APN. Does your phone see the APN for three.co.uk and 3hotspot when you have the freedompop SIM in there?
I don;t even use the Freedompop Messenger app. i just use the sim for data. i can test the functionality of the sim slot because I have a freedompop CDMA/Sprint sim card along with a GSM one.
there are a couple of other ways to unlock the sim slot-they're all based on the same way so don;t know if anything will be different. there is a simfree.exe and there is a thread by someone named summercat for a 1 click procedure. try one of those
tekweezle said:
that;s strange. It worked for me as soon as I added my APN. Does your phone see the APN for three.co.uk and 3hotspot when you have the freedompop SIM in there?
I don;t even use the Freedompop Messenger app. i just use the sim for data. i can test the functionality of the sim slot because I have a freedompop CDMA/Sprint sim card along with a GSM one.
there are a couple of other ways to unlock the sim slot-they're all based on the same way so don;t know if anything will be different. there is a simfree.exe and there is a thread by someone named summercat for a 1 click procedure. try one of those
Click to expand...
Click to collapse
yep thats the first apn I see "three.co.uk"
im gonna tot back to zv8 and try this one more time or im just gonna go with ring plus or ting.
But thanks for all the help.
And you used ##3282# to add the new apn, correct?
I would go down to zve, then do the Ota update from sprint to zvg or zvh, then do the unlock and root and sim unlock. It's worked fine for me on zvh and zvi.
Sent from my LG-LS980 using Tapatalk
tekweezle said:
And you used ##3282# to add the new apn, correct?
I would go down to zve, then do the Ota update from sprint to zvg or zvh, then do the unlock and root and sim unlock. It's worked fine for me on zvh and zvi.
Sent from my LG-LS980 using Tapatalk
Click to expand...
Click to collapse
Yep, I enabled the lte/cdma, rebooted, then enabled gsm, rebooted and I got it to say freedompop on the lockscreen but after a couple of min. It went back to searching for networks.
im gonna try zve to zvg with the two click method
Good luck. The way you know it is supposed to be correctly installed is that your boot animation changes for the yellow sprint spark animation to some swirly wavy rainbow. The carrier image gets swapped to a gsm version.
Sent from my LG-LS980 using Tapatalk

Cannot connect to LTE (doesn't matter what rom i'm on)

Hi XDA, I have an unlocked pixel XL on verizon network. I cannot connect to LTE or anything other than 2g networks. I have clean installed, changed APNs and tried everything to properly get the LTE back. Help?
kingbri said:
Hi XDA, I have an unlocked pixel XL on verizon network. I cannot connect to LTE or anything other than 2g networks. I have clean installed, changed APNs and tried everything to properly get the LTE back. Help?
Click to expand...
Click to collapse
I mean this is gonna sound dumb but have you looked at the mobile networks setting page and have your preferred network on LTE?
loeffler23 said:
I mean this is gonna sound dumb but have you looked at the mobile networks setting page and have your preferred network on LTE?
Click to expand...
Click to collapse
Yes
Can you change the network operators on 8.1?
Is your unlocked Pixel XL from the USA? It seems it doesn't support the correct bands for your network
All pixels have the same radios. Dial *#*#4636#*#* click on phone info. Change settings if needed
SIM card is toast. I have had this exact thing happen to me. Just go into a VZW store and request a new one. Sim handshake needed for LTE connection only on VZW.
SynisterWolf said:
SIM card is toast. I have had this exact thing happen to me. Just go into a VZW store and request a new one. Sim handshake needed for LTE connection only on VZW.
Click to expand...
Click to collapse
I did get a new sim card, problem still persists
kingbri said:
I did get a new sim card, problem still persists
Click to expand...
Click to collapse
After you got the new sim and installed it did you go back to factory rom and waited a bit for it to connect to the network?
Sent from a Glade[emoji768] PlugIns[emoji768]
SynisterWolf said:
After you got the new sim and installed it did you go back to factory room and waited a bit for it to connect to the network?
Sent from a Glade[emoji768] PlugIns[emoji768]
Click to expand...
Click to collapse
I put the sim in when I reset, no connection, should I try again?
kingbri said:
I put the sim in when I reset, no connection, should I try again?
Click to expand...
Click to collapse
What firmware version are you on? And when you update are you flashing all or just flashing a certain thing?
loeffler23 said:
What firmware version are you on? And when you update are you flashing all or just flashing a certain thing?
Click to expand...
Click to collapse
I'm on the February patch, stock. I'm flashing everything, also, is it normal for your phone number to not be your phone number with a new sim?
My number showing up on about phone is 908-770-6054. This is not my number, could it be human error?
kingbri said:
My number showing up on about phone is 908-770-6054. This is not my number, could it be human error?
Click to expand...
Click to collapse
Contact your carrier or go in and tell them that it is not your number and that you are stuck on 2g they should be able to tell you how to fix it or if you go in they can fix it
I did contact my carrier, they cannot figure out what to do. Replaced the sim about 4 times, still no luck. I go into testing (secret code) and I am on 1x network @loeffler23
Sounds like your efs data could be corrupt and there is no way to fix that. Or your LTE radio is toast. Did someone try to carrier unlock your phone?
DR3W5K1 said:
Sounds like your efs data could be corrupt and there is no way to fix that. Or your LTE radio is toast. Did someone try to carrier unlock your phone?
Click to expand...
Click to collapse
my phone's unlocked by default and there has to be a way to fix efs, not accessible by recovery? (what is efs)
It holds the imei and other radio proprietary info not sure what partition that data is actually in on this device. I think the efs data is no longer in /efs
Twrp used to have a option for efs backup with the data system backup and restore options

Categories

Resources