Related
When ever the phone is in standby for a few minutes or so, it refuses to power back on when I press the power button. The only way to bring the phone back is a soft reset. While it is frozen in standby mode it does not receive phones calls, emails or texts. Im running lvsw 03-26. I noticed it didn’t happen with lvsw 3-20…but it was happening with both versions of xda live. I did a few hard resets to see if that will get rid of it…but nothing. I tried searching high and low on the site and even read wiki for answers but no one seems to know what is going on. I saw a few people post up the same issue but still no help….so I decided to open a new thread. Can anyone help?
It happens. Do you have a Storage Card in? If so, take it out for a while and see what happens. What 3rd party apps are you using too. I know Wisbar Advance causes this issue. Can you list what you're running and maybe I can see if you're having the same problem I was.
I've had the same problem with most WM6 roms. Having upgraded to BlackEd2.0 the problem seems to have gone though...
are you running a today plugin off storage card perhaps?
none of the roms i've tried had power on problems
Sometimes you can have that problem with having a cluttered SD Card or having a program that is accessing online in the background.
I have a 512 storage card. I’m not running much 3rd party apps…I have Mundu IM, Microsoft live search, Google maps, WM black commander, macromedia flash player active x…and that’s it. I Had mundu, live search and Google maps installed to my storage card. After reading rabanJR’s post, I uninstalled them from the card and installed them to the phone. I then went back to the card and deleted all program folders and files….I also did a general clean up of the card. Lets see what happens now.
Also to swampy…im not running much of anything on my today screen….just the messages, calendar and the com manager plug in that came with the rom. That’s all. Lets hope for the best.
Bad news, it froze up twice again today. I’m all out of ideas….any more suggestions?
funny thing, that just happened to me today. greed led was flashing, but i couldn't get out of standby mode without soft resetting. maybe some kinda software issue? Its the first time it's happened to me since going to wm6. i did notice it before however.
rzanology said:
Bad news, it froze up twice again today. I’m all out of ideas….any more suggestions?
Click to expand...
Click to collapse
maybe try a hard reset?
What Radio Rom?
Have you flashed a new radio lately? If not, what radio ROM version do you have? I had an issue with my TyTN that was definitely a radio issue. Flashed to 1.38.0.11 and haven't had a single issue with freezing since.
Just an idea, of course.
rzanology said:
Bad news, it froze up twice again today. I’m all out of ideas….any more suggestions?
Click to expand...
Click to collapse
yes sir...i tried many hard resets. A radio upgrade is one of the things i tried...i saw a few people trying it. i went to 1.34 though. im going to flash to 1.38 riiight now! im desperate right now. i'll let you know how it goes.
I had the same problem until I upgraded to black 2.0. I had the radio 1.38.0.11 from the time I upgraded to wm6 and my 8525 was freezing until upgrading to black 2.0 solved my problem.
well i have good news. i upgraded to LVSW(2007/04/08) last night...and so far so good. didnt freeze once today. hope the issue is gone for good. thanks all for the help.
same exact issue here running LVSW 03-26 (goes unresponsive while in standby, green blinking LED, soft reset to recover). 2gb card installed...i'll try removing it to see if freezes go away.
rzanology: if LVSW 04/08 fixes the issue, please post back and let us know!
installed (all to device, not card)
salling clicker
resco explorer/registry/ftp/today
kyphur hold comm button toggle
wmxl apps 8525 keyboard fix
shogun cing
will do...one more note...i updated to 1.38.11 i think it was. what funny is right after i updated the radio the phone froze on the first standby. while i was coming back to post i saw the new rom update for lvsw.
This has a been a long reported problem on WM6 ROMs. 'wont wake from sleep' is the common phrase. Radio and bacground app using net I think was the problem, but no real solution if I remember correctly. On LVSW 3 26 I have gone weeks without this though. In the beginning LVSW 3 26 still did the freeze but after a week it stopped and works pretty good now. Sounds like MS is behind it since it makes no sense at all. LOL.
rzanology said:
When ever the phone is in standby for a few minutes or so, it refuses to power back on when I press the power button. The only way to bring the phone back is a soft reset. While it is frozen in standby mode it does not receive phones calls, emails or texts. Im running lvsw 03-26. I noticed it didn’t happen with lvsw 3-20…but it was happening with both versions of xda live. I did a few hard resets to see if that will get rid of it…but nothing. I tried searching high and low on the site and even read wiki for answers but no one seems to know what is going on. I saw a few people post up the same issue but still no help….so I decided to open a new thread. Can anyone help?
Click to expand...
Click to collapse
Wow, I thought I was crazy becasue nobody mentioned this issue before. I had this problem from day 1.
However, i recently noticed that the 1.38 Radio was eating up my battery life and downgraded to 1.34. This combined with installing Black2.0 seems to have taken care of this problem. I just came back from a weekend away from my phone (which i know is a crime since it is so much fun to use) and it woke up right away.
What Radio do you have?
How long are your phones in standby when it happens?
well....bad news again. even after the new rom update it is still freezing. do you guys think this is hardware? I never froze on wm5...i can't see it being a hardware issue. im almost tempted to call cingular and have them send another one, but i dont know how to go back to wm5. for me, the phone will be in standby for 30 minutes or so....then wont turn back on. any more suggestions?
try disabling everything completely.
1 events and notifications
2 beam auto receive
3 bluetooth
4 wifi
5 put device into flight mode
6 all startup items (including those in rom) move to a temp for now
7 disable activesync
8 disable push email
9 disable all today items
1. disable error reporting customer experience
11 remove anything that reads the sd card
12 remove sd card entirely
13 remove sim card
literally disable everything that runs automatically or otherwise.
power down ur phone by pressing power button for 3 secs. shutdown. leave it for 20secs.
power it back up. then test it now.
if u have a problem now then it could be scary bear notifications fix only. u could have a notification queu problem that is causing ur device to contradicory items simultaneously.
this could be caused activesync so no matter which rom u use it comes back via activesync of calendar or tasks.
if at this stage its fixed then bring things back systematically with the most important first like the sim card. turn off flight mode
c how u go. sometimes pda just gets confused and doesnt wake up from a sleep to well (bit like me in the morning... sometimes bed and sleep is just way to good compared to work/life)...
good luck.
Hello,
First and foremost I should note that I tried searching the forums but I was not entirely sure what to search for. I tried a few different queries and they yielded negligible results for my issue. Now, onto my issue:
8525 with wm6 black 3.01
I have my 8525/hermes/tytn/etc/ set to turn the device off after 3 minutes of inactivity in order to preserve battery life. Sometimes, this poses no issues and I can just hit the power button to turn it back on when I need to. Other times however, and perhaps more frequent, I press the power button and nothing happens. Try as I might and regardless of how many times I press the damned button, it will not turn on. I have to use my stylus to do a soft reset in order to have my phone back in operation. Needless to say, this has gotten very annoying. I have since turned that feature off but now my battery drains far too quickly.
Is this a known issue or has anyone experienced similar issues? If so, is there a fix for this? If not, would ATT accept my phone for a warranty exchange with this greymarket software on it? If not, can I just flash it with an official ATT image and then send it in? Thanks.
It's called Sleep of Death... SOD... I had it and I flashed the official AT&T rom and havent had it since.
thanks.. looking into it!
How many apps do you have running. Where are they installed also. I currently run Black Majik, and NEVER have the SoD, or soft reset, so I think it's the stuff you put in your device that may be causing this. Flashing a new ROM wont always solve this, since you and I have the same phone, I think it's what you put in that may cause this.
ronfin44 said:
How many apps do you have running. Where are they installed also. I currently run Black Majik, and NEVER have the SoD, or soft reset, so I think it's the stuff you put in your device that may be causing this. Flashing a new ROM wont always solve this, since you and I have the same phone, I think it's what you put in that may cause this.
Click to expand...
Click to collapse
running? usually just whatever program I have opened since I have it set up to completely escape the program when I X out. As far as where things are installed, everything is installed on my device sans iGo.. However, this issue arised prior to iGo being put on my SD card.
Try this. After a hard reset, load one app to your device, let it sit, test it, and then do another. take your time. See if something you load is causing this. I did a HR on mine cause I had tons of crap on there, loaded stuff slowly and noticed the ButtonFlo CAB is what screwed my ROM from working good, so got rid of it. Since then, its awesome.
Leave the Black and go with JJ's Majik. Is the only ROM to date that hasn't SOD'ed me ... and I run the same apps, the same way, on all the ROM's.
http://wmblack.info/
is this so? i'm going to try at&t's wm6 for a bit, see howt aht works..
Don't belive so
I read a lot of threads regarding the problem, i tried AT&T and same problem, others had it with black, now i am having it with latest LVSW, may be a software problem, i had it using SPB WEATHER and SPB TIME, i hard reset install all but them, worked fine for two days, installed TWEAK2K2, problem came back, now trying without TWEAK2K2, but i doubt problem can be solved
My Opinion
been running through threads all over, just found out that there is no solution, because when a program pushes the unit to wake up from standby it freezes, this program can be weather, alarm, mail, active sync, and even a CALL can cause this, so it's a permanent bug in wm6 and PPC :-(
Hi all,
First I have to say that I'm over the moon with my new TP2!!
I absolutely love it
Today I started customizing it, and I've got one problem.
No matter what task bar I'm installing, after soft reset TF3D won't start.
It just shows HTC, and nothing happens.
At this moment I have the stock Dutch rom that ships with the TP2.
I installed sdkcerts.
Anyone experiencing the same thing??
H.
sorry wrong thread
TF3D
Hi there,
I've had the same issue with my UK spec, a reboot often cures it but it is a bit lame when the software wont even start up.
So far this has only happened to me about 3 times but I have been playing with it immensly and have rebooted it about 20 times already whilst cocking up some Shat Nav software.
Still loving it in general though ;-)
I'm having the same problem, rebooting doesn't solve anything.
A hard reset does, but than I have to reinstall everyting.
Manually starting manila.exe is an option, unfortunately than the time isn't updated.
Anybody has a sollution for this?
My solution was:
1. Go to: Start > Settings > first tab and click on Today > Go to Items Tab.
2. Uncheck TouchFLO 3d and click OK.
3. Do step 1 and 2 agian but then Check TouchFLO 3D.
4. Soft reset.
Done
tried that but it didn't work for me.
Just removed TomTom 7 & SPB Backup and now it seems to start up fine....
That's a bit of a shame, because TomTom and backup are very helpfull apps...
ive had similar issues but only when trying to customise manila theme. kept saying launching touchflo but nothing happens and then reverts to saying tap here to launch manila. if any of the programs you are adding or any of the customisations you are making involve messing with manila then you will have issues! once hard spl is out then all these things wont be an issue any more.
same problem here, don't try to change startmenu things (standaard startmenu/small startmenu, extra rows etc).
If I enable the extra program tab the buttons won't work most of the time.
The stability of the TP2 is not so good yet, hope that there will be a fix or update for it or a very good custom rom from a good chef.
me 2
I have experienced it twice. I got TF running again by unchecking TF3d in the items screen of the today settings, shutting the TP2 down by pressing the on/of switch some seconds, then restarting ,rechecking TF3D and shutting down once more. This has the same effect as a soft reset, only the system is disconnected longer. So perhaps taking the battery out works as well.
I think this problem is there because TF3D is so much integrated in WM 6.1. So the chance of apps interfering with it is pretty big. I hope with WM 6.5, they remove the big menus's (since they are there already in WM 6.5) and other stuff. Just to get more memmory back, and to make TF3D more compatible with other apps. (still waiting for my TP2)
Error no longer happens
Hi Guys,
I found out that mine was being affected by an old copy of IGO 8 that I was trying to install, since I've upgraded to the new version the TF3D issue has completely vanished.
I noticed that when the TF3D failed it was after a period of low memory or high CPU useage, perhaps using some software that isnt compatible with the TP2 is causing TF3D to screw up.
it's just a theory at the mo... can anyone else share their experiences?
Guys,
this is the third thread about this subject. I have the same problem. HTC is not aware about this problem and encourages those who HAVE these issues to call them. Calling is free...
please do so in order to get rid if this massive bug!
I have been doing some investigation of my own on this one.
I have SPB Backup installed which reboots my phone every night and found that TF3D would not start. Even after a few reboots it would not start. Removed it tried again still an issue.
Hard reset and still was getting some issues.
After alot of rebooting etc I found that if you have a pin enabled on your SIM card TF3D has issues on startup.
No PIN and all is fine.
With that in mind I have just left the phone lock on for now until a fix is found for the bug by HTC
hi, please contact HTC with your findings. if they dont know, they cant fix. calling is free.
thought i disabled my PIN and the problem still persists. although i had a "loading..." once. but it didnt load...
I have contacted HTC about this. I am awaiting a reply from them about the issue.
I had the same problem when installing the .cab to remove the bottom curtain. Soft resets, unchecking and checking TouchFlo3D didn't work. I then reinstalled the .cab and the TouchFlo3D also came back.
Perhaps that will work for you too? Try reinstalling the last program after the problems has occured?
I have the same problem, and i did notice that after uninstalling an application it usually works again. The strange this is that it looks like it is not a specific application that I need to uninstall. It could be a cab for a different clock or tab icons or an g-sensor app, or probably any other app.
Strange .....
Hmz, I soft resetted my TP2 and found out that the TF3D again didn't start. Had to re-install the "Bottom Curtain Remover.cab", soft reset and then it started again.
Looks like ahlung has a point in saying that it doesn't look like it's a specific application that needs to be uninstalled / reinstalled.
It can also be affected by file read errors, including files on the SD Card, if you have corrupt files on the SD Card, this can cause TF to not launch and even lock the device.
Cheers,
Beasty
Same problem here!
I also contacted HTC and told them the issue. They suggested me to do a hard reset! If I couldn't think to do it by myself!
It isn't a perfect phone. I've had it crash 3 times after having it for 10 days. It's the same type of crash too, the screen just becomes nonfunctional and I have to pull the battery out to restart the device. The phone does not freeze, the time and incoming calls all work, but I just cannot accept any calls or dial or do anything with the touch screen because it refuses to listen Not sure why it happens but I'm curious to see if people have had this kind of problem and or know of a resolution.
Thanks!!!
What ROM do you have, any software you've installed on it?
Andehh said:
What ROM do you have, any software you've installed on it?
Click to expand...
Click to collapse
Stock T-Mobile rom. I have installed several games and the FM Radio cab, that is all
i think it is not a hardware problem it must be because of something u loaded.try a hard reset. i have t mobile tp2 no problem. i have loaded volpad application, lots of bugs happened. after removing everything was ok. remove one by one and after each make a soft reset. u will solve it. good luck...
I had the exact same problem. My device would think off and on that I had my headphones plugged into it because the headphone icon would appear. Therefore I couldn't hear anything. I finally took my phone to Sprint and they replace it with a new one. They must all have a defect or something. I tried the soft reset, hard reset, and wiping the device. Nothing worked. Not even tech support could figure it out (which isn't surprising, but whatever).
my tmobile tp2
id give it a hard reset and see whats up, some games can lock up ya phone, like the game majong... thats mess my wifes phone up and freeze it if ya dont exit properly.....
Im now on custom shipped 6.5 and my signal keeps switching edge to 3g annd back, so Now im on figuring this out, fun sometimes huh????lol
Thank you all very much for replying to my thread.
I have decided to load a custom 6.5 rom to my device and everything so far is working wonderfully.
I am using http://thewingster.com/athineoschometf3d.aspx with the latest T-Mobile Touch Pro 2 Radio ROM
I had one before, dropped it a few times.. I wrote it off as that being why, well I just got a replacement one sent.. haven't dropped it once, it's been here only about 2 weeks
Randomly sometimes it won't respond to almost anything.. I'll be trying to slide the screen, it either won't at all or will go halfway like I barely touched it. I'll try clicking on things, programs, start, whatever... it'll not respond at all, I end up having to press with way more pressure than I should have to, way more.
Then sometimes without even a reset it'll start working just about normally again.. but that's rarely, usually I'll soft reset or pull the battery for a second and then it'll be fine.. for days even.. then I'll run into it again..
I noticed 2-3 times it was because I had **** updating at the time (motweets) or was receiving email.. but I've since made everything manual regarding email, and motweets updates once every 15 minutes and the amount of tweets is limited so it's not a lot..
Still, I run into this problem, and I've made sure it wasn't a program updating but I can't think of what else would make this happen, am I the only one??
Is it because there's a way to clear cache on internets and other programs and I have no idea how? (I fully close them, that's not the problem, I know my Vogue I just can't figure this out an it seems nobody else has this problem).. Not to mention I have my internet cache's directed to my storage card so as to keep my phone memory as free'd up as possible
If anyone can help..
mine is unresponsive sometimes and i have to tap on the back of the phone to get to work again. i thinks its going out soon
That's what I thought about my old one, I figured I had dropped it to much.. because I did lol but now I got a new one 2 weeks old and I'm running into the SAME problems.. I'm assuming I must be doing something wrong with how I've got **** set-up
j18yo said:
I had one before, dropped it a few times.. I wrote it off as that being why, well I just got a replacement one sent.. haven't dropped it once, it's been here only about 2 weeks
Randomly sometimes it won't respond to almost anything.. I'll be trying to slide the screen, it either won't at all or will go halfway like I barely touched it. I'll try clicking on things, programs, start, whatever... it'll not respond at all, I end up having to press with way more pressure than I should have to, way more.
Then sometimes without even a reset it'll start working just about normally again.. but that's rarely, usually I'll soft reset or pull the battery for a second and then it'll be fine.. for days even.. then I'll run into it again..
I noticed 2-3 times it was because I had **** updating at the time (motweets) or was receiving email.. but I've since made everything manual regarding email, and motweets updates once every 15 minutes and the amount of tweets is limited so it's not a lot..
Still, I run into this problem, and I've made sure it wasn't a program updating but I can't think of what else would make this happen, am I the only one??
Is it because there's a way to clear cache on internets and other programs and I have no idea how? (I fully close them, that's not the problem, I know my Vogue I just can't figure this out an it seems nobody else has this problem).. Not to mention I have my internet cache's directed to my storage card so as to keep my phone memory as free'd up as possible
If anyone can help..
Click to expand...
Click to collapse
j18yo i think that your problem might be that to many programs run when you start your vogue that happened to me before and i hated it but then i heard of a program named "Space Reclaimer" FREE and it made my vogue much more responsive because the program stops any programs that start when you turn on your vogue or any windows mobile phone
I have the same problem usually under the same conditions. Mostly happens in the morning after the device has been off. Works fine for a few seconds then stops responding correctly i.e., the D-Pad stops scrolling correctly with a lag on touch response. I use CleanRAM and it still doesn't fix the prob once it occurs. Sometimes when I run CleanRAM it will occur. I've tried putting biotouch.exe and everyting BUT the kernel processes in the exceptions list and a Level 1 clean. Hard reset yesterday and haven't had the problem yet. If it continues to work, I'll post my settings.
BTW, I'm on a stock 6.1 ROM with a few apps.
j18yo said:
I had one before, dropped it a few times.. I wrote it off as that being why, well I just got a replacement one sent.. haven't dropped it once, it's been here only about 2 weeks
Randomly sometimes it won't respond to almost anything.. I'll be trying to slide the screen, it either won't at all or will go halfway like I barely touched it. I'll try clicking on things, programs, start, whatever... it'll not respond at all, I end up having to press with way more pressure than I should have to, way more.
Then sometimes without even a reset it'll start working just about normally again.. but that's rarely, usually I'll soft reset or pull the battery for a second and then it'll be fine.. for days even.. then I'll run into it again..
I noticed 2-3 times it was because I had **** updating at the time (motweets) or was receiving email.. but I've since made everything manual regarding email, and motweets updates once every 15 minutes and the amount of tweets is limited so it's not a lot..
Still, I run into this problem, and I've made sure it wasn't a program updating but I can't think of what else would make this happen, am I the only one??
Is it because there's a way to clear cache on internets and other programs and I have no idea how? (I fully close them, that's not the problem, I know my Vogue I just can't figure this out an it seems nobody else has this problem).. Not to mention I have my internet cache's directed to my storage card so as to keep my phone memory as free'd up as possible
If anyone can help..
Click to expand...
Click to collapse
What ROM are you running? I asume that wehn your new device came you loaded it the same as the old one. It has to be something with the ROM you are runnning or a problem with a program causing your issue.
My phone would do this periodically too, with Vin's latest ROMs. I turned off Manila and am running Titanium now. Interestingly - no lags when unlocking since. I'll keep Titanium on for some time to see if that makes it go away. I had an issue with both his current v2 and v4 (which I am running now).
Ive had to replace my screen twice and the whole phone once because of touch screen problems. Thank God for the insurance.
Ah yes... to what OP mentioned:
I do not beleive it is a more pressure thing. I do not think it is more pressure that is required but rather that the phone is non responsive. If you are unlocking and typing a PIN, it takes the PIN and all but it takes perhaps one digit every 5 seconds. That's my experience anyway. So it is just slower, as if something was consuming the CPU and UI is not responsive.
crazylegs91 said:
I have the same problem usually under the same conditions. Mostly happens in the morning after the device has been off. Works fine for a few seconds then stops responding correctly i.e., the D-Pad stops scrolling correctly with a lag on touch response. I use CleanRAM and it still doesn't fix the prob once it occurs. Sometimes when I run CleanRAM it will occur. I've tried putting biotouch.exe and everyting BUT the kernel processes in the exceptions list and a Level 1 clean. Hard reset yesterday and haven't had the problem yet. If it continues to work, I'll post my settings.
BTW, I'm on a stock 6.1 ROM with a few apps.
Click to expand...
Click to collapse
THIS..
It has to be the problem.. I have CleanRAM run every 12 hours or 6 hours because I figured it would help.. lol but now your saying sometimes it happens WHEN you run cleanRAM.. Im assuming it does something, or erases something it shouldnt?
This is like the 1 sole thing I have run on a schedule, I've turned off my email and everything to manual, I went into my startup folder and there was about 4-5 things I didn't need which made the battery 100% better than it was in terms of how long it lasts.. and I set-up this CleanRAM schedule on my last phone I THINK I forgot but I do know as soon as I got this 1 going I did it and I'm bout to delete the program completely and see if it'll help, I have speedbooster too which does a cleanup too I'm curious if it would have the same result..
I'll let everyone know if this ended up being my problem incase anyones in the exact same boat with the same apps
PS: I was doing level 3 cleans
j18yo said:
THIS..
It has to be the problem.. I have CleanRAM run every 12 hours or 6 hours because I figured it would help.. lol but now your saying sometimes it happens WHEN you run cleanRAM.. Im assuming it does something, or erases something it shouldnt?
This is like the 1 sole thing I have run on a schedule, I've turned off my email and everything to manual, I went into my startup folder and there was about 4-5 things I didn't need which made the battery 100% better than it was in terms of how long it lasts.. and I set-up this CleanRAM schedule on my last phone I THINK I forgot but I do know as soon as I got this 1 going I did it and I'm bout to delete the program completely and see if it'll help, I have speedbooster too which does a cleanup too I'm curious if it would have the same result..
I'll let everyone know if this ended up being my problem incase anyones in the exact same boat with the same apps
PS: I was doing level 3 cleans
Click to expand...
Click to collapse
Update: I don't think CR erases things as much as it kills processes that won't restart. Thru trial and error, I've adjusted my CleanRAM settings to where I haven't had the problem for a couple of days. I'm able to do a Level 3 cleans on a once a night schedule and during the day if need be. In settings, I have it to close all apps, launch startup progs, and display today screen. I have no exceptions listed for either running progs or startup progs. I have the most up to date version from the OTA update in the program.
The program links in my StartUp folder are: poutlook (original on ROM), sddaemon (original on ROM), WLMUpdate (original on ROM), Glossybars.exe (I added this), biotouch.exe (I added as I thought CR killing this was the source of the problem), pocketwit.exe (I added), and SIPChange (I added).
One thing I did do was delete the link for TouchPal from the Startup folder. I did this for other reasons (I use FingerKeyBoard). Not sure if this was part of the problem.
I can scroll with d-pad and no touch lag.
On a side note, can I delete any of poutlook, sddaemon, or WLMUpdate from the startup folder to save battery power?
I'm probably just a bit above a newb so sorry if I don't make sense.
Update: Just for kicks, I deleted the links for glossybars.exe and pocketwit.exe from my StartUp and it started locking again after running CleanRAM. I put them back in and it works again even after running CleanRAM. Maybe someone with more knowledge can explain this. I'm just keeping it the way it is now...
Hmm weird that you removed something not very important like pocketwit an cleanram caused problems again.. someone has to have some info on this??
I deleted everything from my StartUp folder but my SPB Mobile Shell.. I didn't have sddaemon, but I did have poutlook and WLMUpdate both of which I deleted.. then I had some other programs that aren't necessary for the phone.. I have no problems on restart or anything, and the % showed being used is stays around the 30's now instead of 40s/50s.. and when I run programs it usually reachs 50% tops now instead of 60/70% I used to get.
PS: Pocketwit isnt bad I used to praise the program but now I've tried MoTweets and.. I can't think of the other one now.. ****.. it's really good though but it seems to use a lot more phone power than MoTweets so I went back to that.
Pocketwit kept giving me problems, started saying I need to install that NET 3.5 or whatever but when I try to it says I have a later version already so it won't install, then other times it'll work completely fine.. but MoTweets I like better anyways
Ok, I give up. I restored everything to the way I had it when it was working and now I'm having problems again. After the screen turns off and I turn it back on, it locks up and won't scroll and has the touch lag issue.
Hope someone figures this out. Shouldn't have messed with success. Good luck.
crazylegs91 said:
Ok, I give up. I restored everything to the way I had it when it was working and now I'm having problems again. After the screen turns off and I turn it back on, it locks up and won't scroll and has the touch lag issue.
Hope someone figures this out. Shouldn't have messed with success. Good luck.
Click to expand...
Click to collapse
Are you running TouchFLO?
As mentioned before -for me, turning off TouchFLO (and running Titanium) fixed this 100%...
bigboy292000 said:
Are you running TouchFLO?
As mentioned before -for me, turning off TouchFLO (and running Titanium) fixed this 100%...
Click to expand...
Click to collapse
I'm running a stock Sprint 6.1 ROM. Thanks though.
bigboy292000 said:
Are you running TouchFLO?
As mentioned before -for me, turning off TouchFLO (and running Titanium) fixed this 100%...
Click to expand...
Click to collapse
I'm not using the TouchFLO interface, does that mean its still on though?
I'm not completely up on understanding all this
This was happening with Vin's Rom for me as well. I was tripping out pressing ON so many times with no screen showing up but phone light on! I believe it could be the power settings. I disabled the "Turn off device" which I believe was mentioned in his notes about the rom.
I gave up on this problem for a while but found something when researching how to disable to cube. I used the registry edit in this thread to disable to cube post #69. I didn't do any of the other steps because I'm not having memory probs (42% with pocketwit in the bckgrd).
http://forum.xda-developers.com/showthread.php?t=368269&page=7
I noticed that biotouch.exe never shows up in the running processes menu in CleanRAM and I don't have the "lock/freeze" scrolling problem any longer and I can run CleanRam without the problem occurring. I can press any item on the screen as well with no delayed response.
However, this stops you from being able to finger scroll and do the "side to side" scroll in Messaging. I never really finger scrolled and prefer using the d-pad for scrolling so losing that functionality isn't a big deal to me.
If anyone can figure out how to keep this working so smooth and have the option to finger scroll, I'd be much obliged. It just seems that biotouch.exe craps out sometimes and locks up the d-pad. If they could both work equally well....