Hi guys im a noob here, was pointed in this direction by a mate on another forum, im looking for a way to unlock my orange touch diamond if anyone can help.
Cheers,
Stu
take download this :
http://www.4shared.com/file/128842685/bdb0135a/Diamond_Sim_Unlocker_BY_outlawz.html
the way how u unlock ur diamond its in side the winrar
good luck man
I have try this method, but in step 2 I get an error in the htc that says "upgrade Rom code error please try again" and in the pc It says error 226 flash error, can anyone help me? thanks for all.
Related
Hello
I've searched on this forum and can't find the answer to my specific question.
I upgraded a while back to MrClean AKU 2.3 and now I need to downgrade because the unit needs to be sent back under warranty due to screen alignment issues.
So I unpacked the i-mate WWE ROM, and replaced the ROMUpdateUtility from that with the ROMUpdateUtility_Wizard_NoID.exe, which I downloaded from the XDA FTP site. (This is because using the standard one supplied gives a ROM upgrade error 296: UPGRADE ONLY error.)
As far as I can make out, the ROMUpdateUtility_Wizard_NoID.exe is just patched to not validate the current version when upgrading.
"Brilliant, this should work", I think.
But I get the following error:
"ERROR [238]: FILE READ... the update utility cannot open the requested file. Please check your update utility"
(see here http://static.flickr.com/111/306871020_8aa37f337e_o.gif)
Please help, anyone, I am coming up to the end of my warranty period and reeeeally want to get this crappy broken screen alignment problem sorted!
Thanks in advance
* bump *
Hope it's not considered rude to bump here, just would love to solve this problem as tis driving me a bit mad
Many thanks in advance
msmobiles.com:
This error message may appear when, for some unknown reason, the ROM image on the phone is corrupt. Download the whole RUU and try again.
Click to expand...
Click to collapse
Hey
Thanks for the tip. You were right, it must have been a corrupt .nbf file.
I tried to downgrade and the progress bar started and finished and all seemed to go well.
But when I boot up again I get the white MrClean ROM splash screen still!
Is it possible the update was done but the splash screen was not replaced?
Or perhaps the update wasn't actually done? Which version number do I look for? I used the .nbf file packaged in with the imate ROM K-JAM_WWE_1010903_106_10110_ship.exe
Please help!
try using this rom to downgrade with... after that you should be able to upgrade to any official rom. Make sure that you pick an official one as the above rom downgrades the ipl/spl as well.
ohh... and make sure that you restore the CID lock as well, they might be get rather cranky otherwise...
Good luck
Hello
Thank you so much for the reply, I really appreciate the advice. I would feel so out-there-on-my-own without it! I bought the imate off contract from expansys and it was really expensive and so really don't want it to end up a brick as I can't afford another right now!
I successfully downgraded to that QTEK custom ROM.
But now when I upgrade again to K-JAM_WWE_216901_2169101_020710_ship (latest).exe from that QTEK ROM, it doesn't work! Upgrade error again [ERROR 296]
Here are the screens I get:
http://static.flickr.com/114/309671629_756dc86b9d_o.gif
http://static.flickr.com/107/309671652_327adfb432_o.gif
Thanks again
Mat
Just to clarify... is the phone CID-locked? You might also want to try flashing it with the K-JAM_WWE_1010903_106_10110_ship.exe ROM before upgrading it... you can also try putting the phone in bootloader mode, press and keep pressed both the keys on the right side and then insert the pen in the resetbutton, before trying the upgrade...
EDIT: msmobiles.com shows the following regarding the particular error:
ERROR [296] : UPGRADE ONLY
One of these error messages will appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device. Make sure you use the appropriate RUU tool to upgrade.
Click to expand...
Click to collapse
Hey Nomad
Thanks again for the advice. This is all really really helpful. Going to try what you suggested a bit later.
I think I CID unlocked the phone - to be honest it was a while ago and I just remember blindly following someone's instructions (I was at a point of desperation at the time for another reason!)
Either way, I am pretty sure it would have to have been CID unlocked because I flashed the ROM from the imate default one to the MrClean one.
I did some initial looking around about CID relocking the device but still not sure how. Does the lockiwiz give the option of locking the CID as well as unlocking it?
Thanks!
Mat
I flashed from the QTEK custom ROM to the K-JAM_WWE_1010903_106_10110_ship.exe after doing that special reset whilst in the bootloader. This flash upgrade worked but again it didn't remove the splash screen from the QTEK custom ROM.
But now whenever I try to flash to the latest imate ROM K-JAM_WWE_216901_2169101_020710_ship.exe using the default RUU I get ERROR [296] UPGRADE ONLY.
And when I try to flash to the same ROM using the noID RUU I get ERROR [238]: FILE READ ERROR.
(On that last one, I have re-downloaded both the noID RUU and the extractable archive K-JAM_WWE_216901_2169101_020710_ship.exe from the XDA FTP.
So, I'm still unable to get my ROM to the imate version! Many thanks for your help!
Mat
Hi guys,
downloaded the RUU file but keep getting 202 connection error.
unzipped the files, and got the NBH.
which of the EXEs:
EnterBootLoader
rapitool
RUUGetInfo
can I use to flash the phone over activesync?
Thanks in advance
ok managed to get hard sspl
but got this SoftSPL error about insufficient trustlevel on the phone.
do I need to unlock it?
denizenx said:
ok managed to get hard sspl
but got this SoftSPL error about insufficient trustlevel on the phone.
do I need to unlock it?
Click to expand...
Click to collapse
It's so exciting can anyone help?
Hi,
I'm using a T-Mobile MDA. The SPL version displays as follows:
HERM300
IPL-1.00
HERM300 MFG
SPL-1.01
I tried to flash the HardSPL V7 but failed with error 262. Tried to falsh the HardSPL V6 - failed with the same error.
Tried another desktop computer - no help
Hard reset the MDA - no help
I got the error 262 every time.
Could anybody kindly help point me a way to bypass the error 262?
Thanks a lot!
Woody77 said:
Hi,
I'm using a T-Mobile MDA. The SPL version displays as follows:
HERM300
IPL-1.00
HERM300 MFG
SPL-1.01
Could anybody kindly help point me a way to bypass the error 262?
Thanks a lot!
Click to expand...
Click to collapse
copy on microSD card "SSPL-HERM.exe"
run from hermes this file
phone reboot to BootLoader menu
connet to PC
be patient......please wait......
On A_S window click CANCEL
run RUUWrapper.exe, select "Force Using SSPL"
mateuszrac said:
copy on microSD card "SSPL-HERM.exe"
run from hermes this file
phone reboot to BootLoader menu
connet to PC
be patient......please wait......
On A_S window click CANCEL
run RUUWrapper.exe, select "Force Using SSPL"
Click to expand...
Click to collapse
WOW
It worked!
Thanks a lot!!!
htc touch pro2 t-mobile
I have tow T-Mobile USA Touch Pro2, in the first one i put the hardspl and it work,than i put the Rom without any problems,but in the scened one i got the message windows updating the rom image in your pda phne....... 0% and after 10 min of waiting i got the message Error [262]: update error.I cant flash my phone with the hardspl to put a new ROM.
SPL 0.82.0000
ROM version 1.20,531.4(51986)WWE
Radio version 3.45.25.14
If you used the Hermes Hard SPL then you probably have a brick...
You need to use the Hard SPL for your model, touch pro II is DEFINATELY NOT a Hermes...
htc touch pro2 t-mobile
Do you know witch one for my phone? I have one i used for my first phone it s work good.
Ask these questions in the right forum, you don't have a Hermes...
htc touch pro2 t-mobile
can you show me,where?
You have 25 post bud you must read a lot somewhere but you must to go here
http://forum.xda-developers.com/forumdisplay.php?f=479
And ask there your HTC is a htc pro hope is working ok, you have made one thing so so so so "#$$% gigig its censored... Hspl are device specific there isnt a general HSPL... go there and ask there please.
Some body there will have what you are looking for.
Woody77 said:
WOW
It worked!
Thanks a lot!!!
Click to expand...
Click to collapse
Just curious, how long did you have to wait?????
HI MATES,
PLS COULD ANYONE TELL ME HOW TO TAKE THIS PHONE TO BOOTLOADER MODE IN OTHER TO GET IT FLASHED..
ALREADY I HAVE DOWNLOADED Artemis Touch 4.01 Full with 4 sided cube
I ONLY NEED SOMEONE TO TUTORISE ME HOW TO FLASH IT....
PLS NEWBIE HERE...
THANX IN ADVANCE.
REGARDS.
How to enter to the bootloader you can find in Wiki
But it is not necessarily to enter to this mode for flashing, just run flashing utility and if there will be no errors, you can flash your device without bootloader.
But I suggest read all information from author of this ROM
arte200 unlocking
hello to all ,
i hv xda from O2 model arte200 , i need to unlock it pls i need ur help !!
is that possible to unlock ?
cid unlock is possible - uspl - you can find it in artemis upgrading forum
Hi there - sorry to put this as an urgent one... trying to get help for someone who's been using the ENG S-Off tool for his DHD and has the following error message
"bootloader corrupt. do not reboot! seek help from xda"
to say he's a little worried is an understatement!
please could someone either get back to me on here or in the thread on androidforums
D-U-R-X said:
Hi there - sorry to put this as an urgent one... trying to get help for someone who's been using the ENG S-Off tool for his DHD and has the following error message
"bootloader corrupt. do not reboot! seek help from xda"
to say he's a little worried is an understatement!
please could someone either get back to me on here or in the thread on androidforums
Click to expand...
Click to collapse
For anyone interested, I've been told that he found a solution:
Go to Menu>Settings>Applications>Manage apps and clear the data from Superuser. Reconnect your phone making sure you're on charge only, usb debugging. Run the Eng S-off tool and watch your phone as it attemps to push the data. Superuser should pop up asking to let the Eng tool have privs. Click allow and it should work fine.
Cheers anyway!!