help pls...after i upgrade my blueangel ,touch sreen becomes not that accurate...pls help....is thre any paTCH for this......
creso said:
help pls...after i upgrade my blueangel ,touch sreen becomes not that accurate...pls help....is thre any paTCH for this......
Click to expand...
Click to collapse
Did you do the calibration setup part?
help
yes...still no change ...i even changed mydigitizer but hell..still no change ...just waste ma money...pls,,help
Related
Hi, i've upgrade version v0.20.1 yesterday. it's very nice, system become much faster than before. But i have some problem as well, Sometimes it freezes after a period of time, and hang there. i have to soft restart it... is this normal for this version? any solution for it?thx a lot
I don't have this probleme !
Please don't post everywhere !!!
http://forum.xda-developers.com/showthread.php?t=298486&page=24
belu said:
I don't have this probleme !
Please don't post everywhere !!!
http://forum.xda-developers.com/showthread.php?t=298486&page=24
Click to expand...
Click to collapse
I Just wanna ask a question, is it really necessary for u to be so harsh???...
u do not wanna answer, ok. pls be polite
i suggest moving to black 2.0
walshieau said:
i suggest moving to black 2.0
Click to expand...
Click to collapse
hi, thx man.
may i know whether the ringtone issue is very common for black 2.0? i heard from my fri his ringtone switch back the default after he turn off the phone thx again
calvin83 said:
I Just wanna ask a question, is it really necessary for u to be so harsh???...
u do not wanna answer, ok. pls be polite
Click to expand...
Click to collapse
belu had a point and was being polite about it. We do ask that people make posts regarding issues with a rom in their respective threads instead of cluttering up the board.
calvin83 said:
hi, thx man.
may i know whether the ringtone issue is very common for black 2.0? i heard from my fri his ringtone switch back the default after he turn off the phone thx again
Click to expand...
Click to collapse
Have you read the issues thread on Black Edition 2.0 yet? I'd start there first.
In WM5 there was a registry entry that determined the sensitivity of the touchscreen. I found it useful to increase the sensitivity since I use a screen protector.
Now I'm using WM6, and that registry key doesn't exist. Anybody have a clue how it can be done?
Would be interested in this too
TheForce222 said:
Would be interested in this too
Click to expand...
Click to collapse
What he said ^^^
any one care to share if u know this...i find the touch sensitivity is not very good...i always have to press twice to get it right
I always thought that this was a big problem in porting the TouchFLO things to the Hermes, because the hermes doesnt have a pressure-sensitive Touch Screen?
but hell, prove me wrong
swedbass said:
In WM5 there was a registry entry that determined the sensitivity of the touchscreen. I found it useful to increase the sensitivity since I use a screen protector.
Now I'm using WM6, and that registry key doesn't exist. Anybody have a clue how it can be done?
Click to expand...
Click to collapse
What is the tweak for WM5? Can you share it with us?
I have not heared about it before.
I also need it as I use screen protector too.
Thanks and regards
Isn't the sensitivity adjusted when you do the screen alignment in Settings -> System -> Screen according to your pressure?
swedbass said:
In WM5 there was a registry entry that determined the sensitivity of the touchscreen. I found it useful to increase the sensitivity since I use a screen protector.
Now I'm using WM6, and that registry key doesn't exist. Anybody have a clue how it can be done?
Click to expand...
Click to collapse
Is it top secret that you do not want to share ?
What is the tweak in wm5 please ?
HKLM/SOFTWARE/Drivers/Touch
Inside there is a key named 'Pressure Threshold' which you can modify (remember ONLY to increase it, decreasing it may result a non responding touchscreen)
jolas said:
HKLM/SOFTWARE/Drivers/Touch
Inside there is a key named 'Pressure Threshold' which you can modify (remember ONLY to increase it, decreasing it may result a non responding touchscreen)
Click to expand...
Click to collapse
Thank you very much
Regards
jolas said:
HKLM/SOFTWARE/Drivers/Touch
Inside there is a key named 'Pressure Threshold' which you can modify (remember ONLY to increase it, decreasing it may result a non responding touchscreen)
Click to expand...
Click to collapse
I Flashed i-mate WM5 Rom and the Reg Key dos not exist.
Can you tell me exactly the path and values
Thanks and regards
shafez said:
Thank you very much
Regards
Click to expand...
Click to collapse
Go to HKLM/Drivers/TouchPanel/Pressure Threshold (Tested on HTC Touch)
I changed from 11000 to 12000 for testing and I feel some sensitivity icrease. I thought a lower figure would rather increase it because it is a threashold? Others should test and give feed back
i tried to look for this and cant find touchpanel, any ideas??
kidd78 said:
i tried to look for this and cant find touchpanel, any ideas??
Click to expand...
Click to collapse
Try
HKEY_LOCAL_MACHINE\Drivers\TouchPanel
and u should find it.
I do not have this on the Offical Release there is no HKLM/DRIVERS/Touch
sorry maybe its just not an option unless someone else can find it? I'll do some more looking soon,
yup no touchpanel on this so bit stumped here
victoradjei said:
Go to HKLM/Drivers/TouchPanel/Pressure Threshold (Tested on HTC Touch)
I changed from 11000 to 12000 for testing and I feel some sensitivity icrease. I thought a lower figure would rather increase it because it is a threashold? Others should test and give feed back
Click to expand...
Click to collapse
KEYWORD THERE: TESTED ON HTC TOUCH
The Touch has a different Touchscreen than the TyTN ALLOWING for Pressure Sensitivity.
The Hermes has no such screen, its either touched, or not.
not touched at what pressure
sorryy
my default value is decimal 9175....how come ur is so high 11000??anyway i changed mine to 12000 also...i dont feel any difference at all on my touch...sad
stan23 said:
Isn't the sensitivity adjusted when you do the screen alignment in Settings -> System -> Screen according to your pressure?
Click to expand...
Click to collapse
Anyone know if this is true?
if this dos not exist in the hermes registry then why is it in the hermes forum? this is more than confusing. I don't understand why people with the HTC Touch/Elf are posting there results here. maybe it came up on a search and they didn't relize this was the hermes forum? in any case MODS should move this if there is nothing relivant to the hermes.
Hi,
I'm a new user of HTC Hermes, on wm6 ( before i was on asus wm5) and i get a problem of configuration...maybe the solution is simple and just under my eyes, but i can't find it ;o(.
On my wm5, i can change what kind of events will wake up the ppc ( car insertion, incomming connection,...) I can find this option on wm6.
Maybe someone know the solution and can help...
Thanks for you answers.
Tsyst.
Hi,
Maybe my request is not really clear or maybe nobody as an idea to solve my problem or a link to a base of reference for register base of wm6 pro.
Tks 4 help
TSyst.
I have never seen such a feature in any WM-based device. Asus might be the only one, and this is not an Asus forum
hi,
I know it's not an asus forum and in all case, my asus is go back to his box ;o))...
I'm not sure it was an asus feature, it was really look's like an original wm element.
the setting is was to do are :
- pda don't wake up when card are inserted or extracted
- pda don't wake up when i plug it on pc ( or stay off when i say off...)
- pda don't wake up pda automaticly on incoming call...
Maybe an idea, or a tweak ?
tks
TSyst.
i would wonder, if anyone would know how to influence this behaviour.... for me it simply... was the same all the time, so y would one change it, if it works correctly and hazzle free...
softonic123 said:
i would wonder, if anyone would know how to influence this behaviour.... for me it simply... was the same all the time, so y would one change it, if it works correctly and hazzle free...
Click to expand...
Click to collapse
Hi,
i'm sorry, i've not understand all your reply, i'm french and my english is not at the top
Tks
TSyst
hi,
nobody have an idea ? it make me crasy when i see my device always switch on when i want only charge battery
Now, i'm a big boy, and i don't need a light in my bedroom when i want to sleep
tks for help
Hi People
Anybody use a PointUI on Samsung i780?
I have problem. When PointUI is on, touch screen not working good. I want to click on icon but open something else. Somethimes screen rotated 90 degrees. I dont know where problem is. Can someone help me? Sorry for my english
you need the wm5 cab, not the regular one. got the same problem.
http://www.pointui.com/files/tests/1.5a/Speed2/Pointui.Home.Wm5.CAB
yup.. the latest version (1.51a) has a lil prob with i780 like what u mentioned above...
download and install point ui for wm5, as the link provided by bro bommel0815, and your probs should be solved...
have a nice try....
Ok first off searched for a day or two and i could not find anything to help the problem that i have with my new tilt2. Its driving me crazy! i went from a touch pro(att fuze) to a tp2(att tilt 2) and the tp2 screen only goes to landscape when the keyboard goes out period, no landscape in photo or any thing tf3d at all. i installed gyrator and that works great in windows programs but not tf3d. Am i the only one who is having this problem? Any help would be greatly appreciated
Thanks
I believe Gyrator doesn't work with TF3D. Try installing changescreen, enabling it (it's not enabled by default) and deleting "manila" as an exception on the exceptions tab. Save your configuration and you're good to go.
add these to your registry:
hkcu\software\htc\htcsensor\gsensor\modulename\
create a string named Manila with a value of \Windows\manila.exe
and
hkcu\software\htc\htcsensor\gsensor\whitelist\
creat a string named Manila with a value of Manila
great thanks alot for the help & i really appreciate it a bunch but but is there any way you can you Dumb it down a little bit for me? Please thanks hahahah
troys5250 said:
great thanks alot for the help & i really appreciate it a bunch but but is there any way you can you Dumb it down a little bit for me? Please thanks hahahah
Click to expand...
Click to collapse
How much more dumbed down can it get?
Uninstall gyrator.
Download this program:
http://forum.xda-developers.com/showthread.php?t=468488
Run the configuration program for it. Go to the exceptions page and select the options you want for Manilla. Save the settings. Soft reset.
troys5250 said:
great thanks alot for the help & i really appreciate it a bunch but but is there any way you can you Dumb it down a little bit for me? Please thanks hahahah
Click to expand...
Click to collapse
Here install this ..
You should try alinging the screen first. Had the same prob . Did what Jack said to the reg to no avail. Then I remembered my 3 yr old jacked my tp2. He pressed his way to the align screen tab. I jus ok'ed out, never finishing the alingment. Then the screen stopped auto rotating. I jus alinged the screen and presto, the tf3d Today screen auto rotated by its self. So try it.
cj_moniz said:
You should try alinging the screen first. Had the same prob . Did what Jack said to the reg to no avail. Then I remembered my 3 yr old jacked my tp2. He pressed his way to the align screen tab. I jus ok'ed out, never finishing the alingment. Then the screen stopped auto rotating. I jus alinged the screen and presto, the tf3d Today screen auto rotated by its self. So try it.
Click to expand...
Click to collapse
It was Jack's reg hack that made my today screen auto aling again and not the align screen utility. Sorry for waisting space.