Develop Bugs

HTC S620 - bad rom (dead??)

Hi all ! I accidentally put htc vox rom into my excalibur (RUU_Vox_HTC_WWE_1.15.405.2_4.1.13.37_02.83.90_Ship.exe). Now my phone seems to be dead . I was try hard reset and bootloader mode but nothing helps. When i connect usb cable without battery keyboard becomes
blue (light on) for 3sec and if i put battery in (usb still conected) screen becomes white for about 10 sec after that only keboard is blue (light on) all time.
Any suggestions ??
PS - sorry for my English

guliwwer said:
Hi all ! I accidentally put htc vox rom into my excalibur (RUU_Vox_HTC_WWE_1.15.405.2_4.1.13.37_02.83.90_Ship.exe). Now my phone seems to be dead . I was try hard reset and bootloader mode but nothing helps. When i connect usb cable without battery keyboard becomes
blue (light on) for 3sec and if i put battery in (usb still conected) screen becomes white for about 10 sec after that only keboard is blue (light on) all time.
Any suggestions ??
PS - sorry for my English
Click to expand...
Click to collapse
sorry to say this but if you flashed a vox rom on you Phone it will kill it because it over wites the bootloader os and radio which dose't work with excaliber

service ??
Mibile phone service will handle it ?? or i must put new mainboard in

guliwwer said:
Mibile phone service will handle it ?? or i must put new mainboard in
Click to expand...
Click to collapse
you will have to get a new mainboard for it or you could try service center

If not try this, hold the camera button (sym button) down for like 10 seconds and then plug in the usb while still holding it down, this should enter you into bootloader mode, where you can reflash the original rom the phone came with. (you can find original roms below in the signature just click on that link.

Its working prloblem is that i dont see nothing on the screen... when i connected it to usb activesync its showing HTC S710 . but keyboard is not in the right order so i don now for example where camra button is. Any sugesstions ??

I think that i can do a new flash but only with official rom which is bt rom. Link to this rom in official rom thread i unavailable. If somone have this rom pls give me a link. THX for all answers.

guliwwer said:
I think that i can do a new flash but only with official rom which is bt rom. Link to this rom in official rom thread i unavailable. If somone have this rom pls give me a link. THX for all answers.
Click to expand...
Click to collapse
If you can;t find it try to google it and see what comes up. Google always seems to do the magic

guliwwer said:
I think that i can do a new flash but only with official rom which is bt rom. Link to this rom in official rom thread i unavailable. If somone have this rom pls give me a link. THX for all answers.
Click to expand...
Click to collapse
Sent PM.

HELP
welcome everyone to the wrong bootloader spent HTC S620 (HTC ozone) so I can not enter bootloader: And the device does not respond to anything I can do what?

adu84 said:
welcome everyone to the wrong bootloader spent HTC S620 (HTC ozone) so I can not enter bootloader: And the device does not respond to anything I can do what?
Click to expand...
Click to collapse
I am not quite understanding what are you talking about, do you have a dash or an ozone

Some BADA codes

Important The below codes are not for noobs. If you by-chance brick your phone. I am no-where responsible. You can regain your firmware by flashing it to the phone. That is no Problem
Note-P.S- All the codes can be entered using the dialer...The code will be executed after you enter the last # ( i.e. if you just enter the codes below, it will execute it without permission
*2767*3855#
Think twice before you use this code. It is a Factory reset code. This will wipe off all your data be it in the internal memory or the external memory. I advice you people to use this code with the External SD card and the SIM removed.
Once you have entered this code, There is no way you can stop it.
*#197328640#- This code is used to enter the Service mode. You can change settings here and run some tests. Any changes except for the camera part will no crash your FW.
*#0228#- This code gives you information about your phone battery.
*#7465625#- This code can be used to check the status of SIM lock, Network LOCK,etc.
Codes to get Firmware Version Information
*#4986*2650468# - SW Version, HW Version, MP, RF Cal Date, CSC Version, CSC Model Spec, FFS Version, RC2 Version
*#1234# - SW Version and CSC Version
*#1111# - FTA SW Version
*#2222# - FTA HW Version
Wi-Fi and Bluetooth testing codes
*#526# - Wi-Fi Manual MFG Test Mode
*#232337# - BT RF Test Mode
Code to launch various factory tests
*#0*# - LCD test
*#0673# OR *#0289# - Melody test
*#0842# - Vibration test
*#2663# OR *#2664# - TM Command
*#4097*4097# - GPS menu
*#272*time* - csc pre configuration
example *#272*1423* ( if the time is 14:23)
*#0002*28346# - Another service menu
*#0228#- Battery test
*#232337#- Bluetooth addrs
*#5239870*# - Admin settings
*#66225*# Motion Calibration
PS- Many users have complained that the motion sensor calibration code is resulting in the incorrect functioning of the Accelerometer. If you encounter such a problem or if you want to use the Motion sensor Calibration code, Please be sure to place the phone on a flat surface and wait for about a minute!
And tell me how you like it!

Nice post. The code for the battery is very helpful, since I cannot find an app that displays the percentage, like in android.

emiok said:
Nice post. The code for the battery is very helpful, since I cannot find an app that displays the percentage, like in android.
Click to expand...
Click to collapse
.. Settings - About your phone (or Info .. I don't know how is write in English) - System Info - Battery ...

Fahrenheit51 said:
.. Settings - About your phone (or Info .. I don't know how is write in English) - System Info - Battery ...
Click to expand...
Click to collapse
Ya.. but i don't think it is so informative..As mentioned, it is like the battery info on Android Settings...!!

*#0*# = full test menu
*#272*time* = csc pre configuration
example *#272*1423* ( if the time is 14:23)

roxyroot said:
Ya.. but i don't think it is so informative..As mentioned, it is like the battery info on Android Settings...!!
Click to expand...
Click to collapse
what do you mean? I shows me about 73% and bada under settings tell me 74% maybe its uprounded...
And what is the real data? Bat RAW SOC or BAT adjusted SOC?
Thx to op for this thread...

Very useful, thanks!

Dont forget the gps menu -
*#4097*4097#
edit : this does not work in BADA 2.0.1
The bada 2.0 equivelent is *#3214789650# (for versions prior to PKH2 this needs the phone in MID debug level)

Samuel Sung said:
what do you mean? I shows me about 73% and bada under settings tell me 74% maybe its uprounded...
And what is the real data? Bat RAW SOC or BAT adjusted SOC?
Thx to op for this thread...
Click to expand...
Click to collapse
adjusted SOC

duxxyuk said:
Dont forget the gps menu -
*#4097*4097#
Click to expand...
Click to collapse
Man! Thanks for reminding! I wrote it down..But forgot to put it on!

roxyroot said:
Man! Thanks for reminding! I wrote it down..But forgot to put it on!
Click to expand...
Click to collapse
Heh, if you want to live dangerously (newbies - stay WELL CLEAR) it's possible with certain firmwares to unlock the master debug mode :
Unlock debug by dialing *#33284*# then choosing mid or high. The phone will then reboot.
It is now possible to dial up the debug menu by dialing *#7092463*#
Do be aware that the debug modes will slow down your phone as this activates a second serial port to which loads of information is being dumped... I's been very useful for the bootloader work.
All the best ~D

duxxyuk said:
Heh, if you want to live dangerously (newbies - stay WELL CLEAR) it's possible with certain firmwares to unlock the master debug mode :
Unlock debug by dialing *#33284*# then choosing mid or high. The phone will then reboot.
It is now possible to dial up the debug menu by dialing *#7092463*#
Do be aware that the debug modes will slow down your phone as this activates a second serial port to which loads of information is being dumped... I's been very useful for the bootloader work.
All the best ~D
Click to expand...
Click to collapse
i didn't know that! ( It is not the Nat Geo show!)

*#66225*# Motion Calibration

sitcoms said:
*#66225*# Motion Calibration
Click to expand...
Click to collapse
Woah, that's the one that had me RE-calibrating my phone whilst holding it at 45° to the right with the top touching the floor and the bottom about 2cm's off the floor .
If your accelerometer works... DON'T fix it

^
just put the phone on a flat surface then calibrate it

sitcoms said:
^
just put the phone on a flat surface then calibrate it
Click to expand...
Click to collapse
This doesn't work at all times if the sensor itself is not placed properly in the device. I too had to calibrate it with the phone at odd angles to perfect the sensor. Now the accelerometer works absolutely fine.

After changing files with sTune should i send *2767*3855# for factory reset? Is this correct? Thanks!

Thanks man! You rock! Wanted some of these!!

@Gremo What files are you changing and why? If you want the hard reset, just go to the dialer and type "*2767*3855#", it will conduct the reset automatically!

@dancegirl You are welcome!

Samsung Galaxy S4 MT6572 GT-I9500 no service solution !!!

hello ! after a week of testing ive finally found a solution for samsung galaxy s4 clone ( mt6572 gt-i9500 ). with no service !
Soo , you have no service and can't make calls ! follow this instructions and you will be talking on your phone in no time
Its very simple : ( i'll add the necessary links / software for this job )
1. you need SP_Flash_Tool_exe_v3.1316.0.150
2. you need the WORKING ROM ! modified by me
3. you need MtkDroidTools
( this version is allready modified to work with mt6572 )
The procedure :
we must first format the phone using SP_Flash_Tool_exe_v3.1316.0.150 . soo we open the program and select the scatter file.txt atached in the rom . hit format and then hit OK.
Now remove the battery and connect the usb cable to the phone. it will start formatting the phone. wait till is ready ( you will see a green circle )
At this point , the phone is ready to receive the new ROM
you have allready selected the scatter file early'r .
THIS STEP IS VERY IMPORTANT !!! uncheck the CACHE and USRDATA at the bottom.
Now hit Download button , you will get a warning message, just press YES
Now put the baterry back into the phone, and connect the usb cable. wait till the process end's and when you see the green circle you can disconect the phone, remove the battery, insert back the battery and power on the phone , and voila !! your phone have working network !!
Next step is to write the IMEI...
Use MtkDroidTools ( you must have debugging mode on in the phone ) connect the phone to the usb cable, wait till MtkDroidTools see your phone , and then hit the big imei button. There you must provide the imei number ( you can find it under the battery ) after that you hit write imei and then reset your phone and you are good to go
I presume that you allready have the usb drivers ( if not, i can also provide them )
For other questions use the forum below
If i have saved your day, maybe you consider making a small donation ( for that, use the DONATE TO ME button under my name )
Have a nice day !

Thanks for this tut, @pacattosul its very easy to follow, unlike some I've come accross, could I ask this?, will this not work by just using Mtkdroid tools as in the latter part of your tutorial? without the need of flashing a new rom?
Also I hope you dont mind a bit of constructive criticism, the developer of Mtkdroid tools @rua1 has specifically asked that his program is not placed on other sites for download, perhaps you could just change your post to link to his thread, here..... http://forum.xda-developers.com/showthread.php?t=2160490 Plus I do feel you are rather inviting problems by not specifying the details and build of your device that you have tested this method on, I don't have this phone but I'm sure there are quite a few different versions out there and the result of flashing the wrong preloader for your device can be a $200 paperweight, as I'm sure you know, and with that in mind I would stress that before embarking on this, a full backup is desirable in case it all goes t*ts up. Hope you don't mind my mentioning this stuff, if you decide to make those few minor changes, I'll edit and delete this paragraph, don't want to spoil your thread.

hello oscarblue48 !
i really don't mind that you point my mistakes... im actually happy cause as you say, MTKtools its somebody's work and should really be apreciated. BUT, this tutorial only work's with this special version of MTKtools !! i'm not responsable if you use any other tools/versions !!
you say that people may broke 200$ phone if they flash this rom... ok it may happend, but only if they mistake the model-version of the phone ! like ive say'd this tutorial and the rom only goes for MT6572 GT-I9500 SAMSUNG GALAXY S4 CLONE !! if they flash this rom on other devices they are responsible for what they do...
Actually , this rom goes for dead phones as well ( as i mentioned on other site ) , so i supose that most of the people , when they reach this tutorial, its for a good known reason
You also ask me if you can only use the mtktools... well you can easylly use that program, but you will probably not change anything inside that phone. most of the people try'd mtktool and complain that the imei remains null or empty after writing with this tool... soo in order to fix the annoyng NO SERVICE problem, i recommend that you follow the entire tutorial
I hope ive answered all your questions, and offcourse if you encounter any problem you can allways comeback and simply ask

Hi bro help me out here is my thread : http://forum.xda-developers.com/showthread.php?p=50483872
I tried your rom but still not working i can enter to recovery mode with different preloader and doesn't show me black screen when turned on as my big problem is i can not format my nand as you will see in my thread i was messing up with boot logo via root as it was rooted with supersu...so any help please as i have tried alot roms and i can't find stock rom for this phone MTK6572_S00 samsung s4 this is made in korea by samsung...and I do not have backup of my rom...
Thanks in advance

Please help
Always getting - 4032(DRAM FAILED) while downloading- Followed same steps !
Appreciate any help
Update:
I have flashed it successfully - Also the IMEI, but still not registering to network.

be aware !! you have the dual sim ( 2 sim ) phone or single sim?? this only works for single sim phone... also, you must not try to flash this on dual sim phone !!
try this... go to settings and at the network tab change the connection mode... chose hspda preffered... that may do the trick !

@pacattosul would you please give me thelink file?cuse i'm having the same problem my device cannot detect any sim card my device is
hardware : mt 6572
model : gt i9500
buildnumber :alps.jb3.mp.v1
build date utc : 20140116-083248
android v :4.2.2
basebanv :molly.wr8.w1315.md.wg.mp.v1.p4.2013/09/27 05:05
kernel :.4.5([email protected])(gcc version 4.6 x google
. thank u

pacattosul said:
be aware !! you have the dual sim ( 2 sim ) phone or single sim?? this only works for single sim phone... also, you must not try to flash this on dual sim phone !!
try this... go to settings and at the network tab change the connection mode... chose hspda preffered... that may do the trick !
Click to expand...
Click to collapse
Hi mine is single dim and exactly same as urs. No matter what I choose it always goes to gsm only
Sent from my D5503 using xda premium

are you using a 3G only sim card? hope you understand what i mean to say... there are normal sim cards that can connect on edge or 3g network and some other company's that only use 3g network... if you use one of this sim cards, please try another sim card just till you get on the network , and then you can switch to your regular sim card...
hope that help's you..

Sometimes saying thanks is not enough.

hardware : UNIVERSAL5410
model : i9500
buildnumber :JDQ39.19500XXUAMDK_v2
build date utc : 20140215-054157
android v :4.2.2
basebanv :moly.wr8.w1315.md.wg.mp.v1.p3,2014/02/11 14:38
kernel :.3.4.5 ([email protected])(gcc version 4.6 x google
please links
[email protected]

pacattosul said:
are you using a 3G only sim card? hope you understand what i mean to say... there are normal sim cards that can connect on edge or 3g network and some other company's that only use 3g network... if you use one of this sim cards, please try another sim card just till you get on the network , and then you can switch to your regular sim card...
hope that help's you..
Click to expand...
Click to collapse
I think i found the problem , nothing to do with ROM i assume, it was all about IMEI, the IMEI given (as well as printed on device) seems invalid!!
Thanks anyways

Please could i have the link to the rom?
Many thanks
Paul

Could I also have the link for the rom and the usb drivers, please?

S4 Clone Mtk6572 error 4032
hello all specialists
I have a clone mtk6572 s4 s00
have unfortunately formatted with flash tool
since it is a UBIFS system I can no longer flahen it
the pc recognizes it yet but it can not be switched on
ask for your help
1000 thanks:crying:
Canetaazul said:
Could I also have the link for the rom and the usb drivers, please?
Click to expand...
Click to collapse

I9500 MT6572 need link for rom, thnks
Hi, can I have the link for your rom, I hope this is the right one for my dead phone.
Build Number: JDQ39.I9500XXUAMDK_v2
Thanks

Hi, can I have the link for your rom, my handset is very loggy, hope this will fix it thanxxx..

Help!!
Please I need your help. I have a bricked S4 clone. Can do you send me the rom link? Thank you.
---------- Post added at 08:13 PM ---------- Previous post was at 08:02 PM ----------
Hi, I have the same device. Did you fix the problems? My S4 is bricked. If you fix the problems please tell me how did you do?. Thanks

Will this work on MT6589
i have a rooted s4 clone and out of nowhere the network stopped. will your method work on my phone?
Quad core ARM v7 1.6ghz

Please link up ROM and droid tools

( Help ) Unlock network tab 3 T211???

Hello developers, please ask, if possible your help to open the wings of this tablet T211 to use any SIM anywhere in the world. We are enslaved many command line users to companies with which we do not want to be. I tried to enter the service mode, and although I've gotten through the command * # 9090 # I fail to enter more options to try. Thank you very much for your attention.
:good:

Wrong section dude this question does not being here......

Tips, tricks and codes, more or less visible

Here are some codes, tricks and tips to enter hidden (or not so visible) menus or functions. Gathered from the net. Discovering them was not my merit, I just centralize them, with help of my friend asotmike.
1. Press repeatedly on Android version (Settings, About phone) to see the hidden surprise
2. Press repeatedly on kernel version (Settings, About phone, All specs ) to enter CIT menu
3. Press repeatedly on Internal storage (Settings, About phone, All specs) to enter Phone Info menu
4. Press repeatedly on MIUI logo (Settings, About phone) to activate and see more update settings (in the 3 dot menu, up, right)
5. Activate VOLTE and VOWIFI menus, they will apear in Settings, SIM cards & mobile network, under sim card settings . Dial *#*#86583#*#* for VOLTE and *#*#869434#*#* for VOWIFI
6. When lantern activated and phone display is off, no need to unlock to close lantern. JUst press power button.
Tested under MIUI11, global (european) variant.
Please feel free to add new codes.
I don't know what does every single submenu of submenu of submenu. Test them at your own risk and curiosity and share with us.

ruh01 said:
Here are some codes, tricks and tips to enter hidden (or not so visible) menus or functions. Gathered from the net. Discovering them was not my merit, I just centralize them, with help of my friend asotmike.
Click to expand...
Click to collapse
Here is one more:
Engineer mode on MTK: *#*#3646633#*#*¨
You have to be developer first to enter. :good:

Generaljan said:
Here is one more:
Engineer mode on MTK: *#*#3646633#*#*¨
You have to be developer first to enter. :good:
Click to expand...
Click to collapse
My hardware testing tab even emptier than rn8pro custom rom list

Generaljan said:
Here is one more:
Engineer mode on MTK: *#*#3646633#*#*¨
You have to be developer first to enter. :good:
Click to expand...
Click to collapse
Excellent

the dial option shows up "grayed" and so I can't click it, any way to get around this?

Hi, is there any way to have back miui- phone, messages , contacts on redmi note 8 pro?? I hate Google apps !! Thanks !!

Z750z said:
Hi, is there any way to have back miui- phone, messages , contacts on redmi note 8 pro?? I hate Google apps !! Thanks !!
Click to expand...
Click to collapse
There is.
Either use a Magisk module available on the telegram group called default miui apps or drastically flash Indonesian global Rom which has those by default. You can have further details / discussion in the thread called Call Recorder.
Hope this helps.

sapien438 said:
the dial option shows up "grayed" and so I can't click it, any way to get around this?
Click to expand...
Click to collapse
If you are referring to volte and vowifi you can use the following solution.
https://forum.xda-developers.com/showpost.php?p=81746693&postcount=12