Hello i have a htc excalibur and i recently updated my phone to the energy rom
ever since then i cannot connect to active sync. the problem is
that ever since i updated when i go in to settings>connections there is no
"usb-to-pc" . so i cannot turn "Enable advanced network functionality" off .
i was wondering is there anyway way i can get the usb-to-pc back or even
turn off "Enable advanced network functionality" by using regedit.
my phone has been soft reset and hard reset and i still have to energy rom
please help me i really want to update my phone and use active sync its useless without it.
gunnigizzle said:
Hello i have a htc excalibur and i recently updated my phone to the energy rom
ever since then i cannot connect to active sync. the problem is
that ever since i updated when i go in to settings>connections there is no
"usb-to-pc" . so i cannot turn "Enable advanced network functionality" off .
i was wondering is there anyway way i can get the usb-to-pc back or even
turn off "Enable advanced network functionality" by using regedit.
my phone has been soft reset and hard reset and i still have to energy rom
please help me i really want to update my phone and use active sync its useless without it.
Click to expand...
Click to collapse
Enter bootloader mode by holding the camera button and pressing(not holding) the power button. Then connect your phone to your PC and flash a stock ROM which can be found here. http://forum.xda-developers.com/showthread.php?t=381726 Try that out hopefully it helps.
gunnigizzle said:
Hello i have a htc excalibur and i recently updated my phone to the energy rom
ever since then i cannot connect to active sync. the problem is
that ever since i updated when i go in to settings>connections there is no
"usb-to-pc" . so i cannot turn "Enable advanced network functionality" off .
i was wondering is there anyway way i can get the usb-to-pc back or even
turn off "Enable advanced network functionality" by using regedit.
my phone has been soft reset and hard reset and i still have to energy rom
please help me i really want to update my phone and use active sync its useless without it.
Click to expand...
Click to collapse
Double posting my firend http://forum.xda-developers.com/showthread.php?t=509399&page=72, respect the rules.
If you can't get a sync with phone then i'd sudjest getting into bootloader 'in sticky if not know how?' and flashing stock rom, then flash a new ROM.
Please respect forum rules.
Locked.
Related
So im trying to connect my dash so i can install windows 6.1 kavana, currently running the rose 6.5rom i believe. So when i go to hook it up to my pc nothing comes up its as if the phone was not connected at all, now i was thinking should i hard reset and then try to install, or what can i do?
ok did the hard reset that didnt do much but reset it, anyway i can get it so it shows up on my pc as connected so then i can re-flash?
Have you gone into the USB settings and unchecked the "Advanced Functionality" setting? After you've done that, you should be able to form a relationship between your pc and Windows Mobile Device Center or Activesync depending on what Windows OS you're using.
yea i did that still doesnt connect comes up as generic device asks for a driver and since i dont have one it says device not installed correctly, also noticed i couldnt sent mms messages.
nvm got it working with a little bit of searching
redg2 said:
nvm got it working with a little bit of searching
Click to expand...
Click to collapse
What was your solution? Thanks.
You probably had to disable the sdcard, if you have one I assume.
It was dumb but i had to install active sync since i forgot to install that after the format of my pc and for the MMS i had to go into the connectivity menu and set it up for tmobile, all working perfect now..only if i could get better signal though, anyway of just installing an update for the radio?
redg2 said:
It was dumb but i had to install active sync since i forgot to install that after the format of my pc and for the MMS i had to go into the connectivity menu and set it up for tmobile, all working perfect now..only if i could get better signal though, anyway of just installing an update for the radio?
Click to expand...
Click to collapse
Not really. Don't know where you live but signal is 90% of the times dependent from your carrier. Unless you have a RAZR, than its your phone not picking up much.
Hi,
while i was messing around with the network setting via *#*#4636#*#* menu, I accidentally selected the USA bands, and it has caused me to not able to make any phone calls or even be connected to the network.
It does not allow me to change back to the default bands I was - international
Understand that this seems to be quite common mistakes across different devices.
But specifically for Desire 816, anyone can help me with this? My device is not rooted (i'd like to keep it taht way) and bought unlock.
Anyone? I'd be super grateful! Panicking like crazy right now...
lushtea said:
Hi,
while i was messing around with the network setting via *#*#4636#*#* menu, I accidentally selected the USA bands, and it has caused me to not able to make any phone calls or even be connected to the network.
It does not allow me to change back to the default bands I was - international
Understand that this seems to be quite common mistakes across different devices.
But specifically for Desire 816, anyone can help me with this? My device is not rooted (i'd like to keep it taht way) and bought unlock.
Anyone? I'd be super grateful! Panicking like crazy right now...
Click to expand...
Click to collapse
Hey its simple and worked on mine!
Got to *#*#4636#*#*, then enable Flight mode using the Power menu, or your status bar toggle, then click Select Radio Band and you should see Automatic, now before you select it, disable flight mode. Hope it works, else in order to reset RSD settings, you need to factory reset (unless u root ofc)
tpr0 said:
Hey its simple and worked on mine!
Got to *#*#4636#*#*, then enable Flight mode using the Power menu, or your status bar toggle, then click Select Radio Band and you should see Automatic, now before you select it, disable flight mode. Hope it works, else in order to reset RSD settings, you need to factory reset (unless u root ofc)
Click to expand...
Click to collapse
Thanks for the reply!
Tried it, but the automatic option did not show up on mine
So how do you factory reset? I did reset through the phone settings already, also tried recovery, none worked...
Help
Please help me same problem i m facing i need your help.. i changed slot 1 settings in *#*#*4636#*#* three months ago then network gone.. from that day i m using my sim in slot 2 and slot 1 is not detecting network. I tried changing settings those settings again also done hard reset but not working
After flashing CM-12, Both SIM are not working. Flashed stock L firmware but still problem is there... any solution?
yesterday i purchased a galaxy tab s 10.5 lte model. i found the wifi automatically turns off when display turns off. i also changed wifi on during sleep settings to always. please help
my phone is not rooted.
settings > Wireless & Networks > WiFi Settings
> advanced>always
above is my current setting , i also changed the options to see whether it works, but result is the same
akraghavendran said:
yesterday i purchased a galaxy tab s 10.5 lte model. i found the wifi automatically turns off when display turns off. i also changed wifi on during sleep settings to always. please help
my phone is not rooted.
settings > Wireless & Networks > WiFi Settings
> advanced>always
above is my current setting , i also changed the options to see whether it works, but result is the same
Click to expand...
Click to collapse
Really wierd....but i know the solution....get it rooted and install iron rom. Then you can go into synopse, network and then make wifi mode the same for in standby as it is when awake....worked for me.....good luck m8
pdolton2000 said:
Really wierd....but i know the solution....get it rooted and install iron rom. Then you can go into synopse, network and then make wifi mode the same for in standby as it is when awake....worked for me.....good luck m8
Click to expand...
Click to collapse
That's actually my SkyHigh kernel and nothing to do with custom ROM. Just root, flash CWM or TWRP recovery, flash the kernel and install synapse.
OP,
Have you tried to upgrade your firmware to a newer release? Search sammobile and manually flash with Odin.
Weird.
I take it you have no other battery saving/power saving apps installed? e.g Juice Defender (I'm guessing not if you're not rooted).
There must be something else affecting it if it's not the wifi sleep settings.
I presume you're not using smart network switching either?
UpInTheAir said:
That's actually my SkyHigh kernel and nothing to do with custom ROM. Just root, flash CWM or TWRP recovery, flash the kernel and install synapse.
OP,
Have you tried to upgrade your firmware to a newer release? Search sammobile and manually flash with Odin.
Click to expand...
Click to collapse
I new it was your kernal that allows you to do this not the rom, just thought it would be good to give the op a solution to give the bloke a solution resulting in not only having a kernal thats mint by the way that gives him control of this function but also a much better touchwiz rom in the process....wasnt trying to discredit you m8 sorry if it appeared that way....love the work by the way m8 without people like yourself us lot would be stuck with the rubbish preset settings that arnt changable and none negotiable.
I have upgraded from Jelly Beans to Kitkat 4.4.2 via regular OTA upgrade provided by Samsung on my Samsung Note 8" GT-N5110. Since then I am unable to use Wifi on it. My device is NOT rooted and is running on original Samsung software upgraded via OTA.
I have tried to clear cache and then factory re-set as well and still can't get the WIFI button to sometime even select available WIFI networks. So issues I am facing are summarized below"
1. After factory re-set and clearing cache via Power+Vol Up option, when I tried to setup from scratch, WIFI would not turn on at all meaning device would not be able to scan for available WIFI network or would do so but after long time and if it does show available Networks and I select my home network with required security (WPA2) and password, it would show status as " Saved" rather than connecting to this network. The device would not connect to selected network even after multiple tries.
2. When trying to turn wifi on, device would not show "WIFI" button to Green but instead would stuck at "Grey" color for ever unless rebooted and re-tried many times. The grey would turn green when selecting advanced option or tabbing thro' back button but would not scan available networks then. If it would scan thro' Networks, it would just save selected network even with correct security option and password for it.
WIFI not turning on has made this device a piece of junk for any meaningful use. Any suggestions/ help would be highly appreciated. Again please note, my device is UNROOTED and running on original firmware provided by Samsung via OTA upgrade.
Hi XDA Gurus,
Any one can direct me to right section that has solution for this issue if it is a repost? or help me get an answer?
Thanks,
R
Anyone find an answer to this?
I ahve had no luck, same exact issue, anyone have any ideas? thanks
shahrit said:
I have upgraded from Jelly Beans to Kitkat 4.4.2 via regular OTA upgrade provided by Samsung on my Samsung Note 8" GT-N5110. Since then I am unable to use Wifi on it. My device is NOT rooted and is running on original Samsung software upgraded via OTA.
I have tried to clear cache and then factory re-set as well and still can't get the WIFI button to sometime even select available WIFI networks. So issues I am facing are summarized below"
1. After factory re-set and clearing cache via Power+Vol Up option, when I tried to setup from scratch, WIFI would not turn on at all meaning device would not be able to scan for available WIFI network or would do so but after long time and if it does show available Networks and I select my home network with required security (WPA2) and password, it would show status as " Saved" rather than connecting to this network. The device would not connect to selected network even after multiple tries.
2. When trying to turn wifi on, device would not show "WIFI" button to Green but instead would stuck at "Grey" color for ever unless rebooted and re-tried many times. The grey would turn green when selecting advanced option or tabbing thro' back button but would not scan available networks then. If it would scan thro' Networks, it would just save selected network even with correct security option and password for it.
WIFI not turning on has made this device a piece of junk for any meaningful use. Any suggestions/ help would be highly appreciated. Again please note, my device is UNROOTED and running on original firmware provided by Samsung via OTA upgrade.
Click to expand...
Click to collapse
If you don't mind... try odin 3.09, flash philz recovery, factory reset for wipe clean for fresh install option, and boot to downloader. Flash a firmware from sam mobile, or the get a usa version in the development section.
That should flash a clean install after a wipe
Hi there,
Excuse the novice. Just got this 2 days ago and I am still trying to figure it out why I can't access the net at all.
I have not got Android experience much and I am digging now how to come out of this situation.
So no option to access Net at all. The Error in response is " Couldn't sign in. There was communicating problem with Google servers . Try again later." So this is like a loop there.
Android Version -5.1
Baseband Varsion - MOLY.LR9.W1444.MD.LWTG.MP.V16.P10
Kernel Version - 3.10.65
Build Number -ALPS.L1.MP3.V2_NB6753.65U.L1_P22
Custom Build Version - Elephone_P8000_20151014
I must admit the Phone came preset and once I have switch it on it picked up GMT time without I have set anything.
I will appreciate any help or pointing to a resources to try to solve as now it is unusable as I can't download anything.
Thanks in advance.
Check:
Settings --> Data Usage --> (cellular provider tab) --> toggle 'enable mobile data'
See if that's the issue. Good luck.
Now Stacked to The Elephone Logo on and unresponsive.
kevvyboy said:
Check:
Settings --> Data Usage --> (cellular provider tab) --> toggle 'enable mobile data'
See if that's the issue. Good luck.
Click to expand...
Click to collapse
Thanks kevvyboy,
I can't do anything right now. The phone by itself (really) got in a mode I can't read even with letters so small, went to the Android Man with red Mark and now is in front of me unresponsive with the logo of Elephone totaly unresponsive.
Just to underline - I have not touch anything- I have left it on stand by last time I have played with it.
Any clues and help please will be much appreciated.
PS. NOW I have managed to (I guess Switched it off) and again on and there was window with APP UPDATE - came to 116 out of 116 updated and now again can't access the net neither Google Play.
Could this be a OTA Update completed somehow?
Thanks everyone in advance!
saxon_fan_since_1980 said:
Thanks kevvyboy,
I can't do anything right now. The phone by itself (really) got in a mode I can't read even with letters so small, went to the Android Man with red Mark and now is in front of me unresponsive with the logo of Elephone totaly unresponsive.
Just to underline - I have not touch anything- I have left it on stand by last time I have played with it.
Any clues and help please will be much appreciated.
PS. NOW I have managed to (I guess Switched it off) and again on and there was window with APP UPDATE - came to 116 out of 116 updated and now again can't access the net neither Google Play.
Could this be a OTA Update completed somehow?
Thanks everyone in advance!
Click to expand...
Click to collapse
Hi again,
I have enabled the cellular data - no luck again.
When I am trying google play again message Google servers can't be reached and the more interesting - using the - preload browser it try to search trough yahoo search. This phone was sold to me as new, but I am starting to wonder what it has been through before it reached me?
Will a flash using PhilZ Recovery will help?
Could someone point me the way out of this please?
Thanks!
New bizarre Message.
Hi again,
Just to make it more interesting out of the blue it Popped up a Message box with following wording.
"In a Previous Android Version You have disabled all Google App services. Do you want to enable them. Yes/NO,
Of course I have chosen Yes and Again Can't reach net neither via Cellular data nor Wi-Fi.
Any useful contribution will be much appreciated.
Thanks!
Stuck on Airplane Mode? Try toggling it on and off. I remember my HTC OneX having an Airplane Mode issue - had to toggle on / off several times and reboot.
ETA - faulty APN settings for your provider? May explain a mobile data issue, but doesn't address the wifi issue.
Dammit.
Got It Work on Cellular
kevvyboy said:
Stuck on Airplane Mode? Try toggling it on and off. I remember my HTC OneX having an Airplane Mode issue - had to toggle on / off several times and reboot.
ETA - faulty APN settings for your provider? May explain a mobile data issue, but doesn't address the wifi issue.
Dammit.
Click to expand...
Click to collapse
Thanks Kevvyboy for your contribution.
Somehow I have managed to get the Cellular data connected and now have updated the Google Service.
WI-FI still an issue. Is there any sense - updating a driver (if I am not asking stupid question here)?
Thanks!
Glad to hear at least cellular working! The wifi issue is a bit of a mystery to me though - I'm all out of smart ideas, sorry
Hopefully some other bright soul can chip in.
saxon_fan_since_1980 said:
Hi again,
Just to make it more interesting out of the blue it Popped up a Message box with following wording.
"In a Previous Android Version You have disabled all Google App services. Do you want to enable them. Yes/NO,
Of course I have chosen Yes and Again Can't reach net neither via Cellular data nor Wi-Fi.
Any useful contribution will be much appreciated.
Thanks!
Click to expand...
Click to collapse
download drivers for SP flash tools and SP flash tools program.
go and download mediatek drivers and sp flash tool.
you can get these from elephones website, google or where ever. i got mind from needarom. i used the latest versions for both.
i downloaded the 5th November 2015 firmware from elephones rom. it came pre 7-zipped. i unzipped it and left it's structure.
installing the drivers part:
you need to disable signature enforcement in your OS to install the drivers.
open SP flash tools.
load the scatter file in the official rom folder you unzipped with 7 zip.
at this point press the download button in SP tools.
switch off your phone. connect the usb cable to the phone and the computer.
you should now have the latest firmware on you phone when complete.
please note it wipes everything, so back up anything important to you.
once done, set up your apn in settings, mobile networks, access points.
wifi should work after a clean factory reset if you don't have a dodgy device.
elephone only supports 2.4ghz for wifi as far as a i know.
also make sure your network bands and are supported by the p8000.
El_Nino9 said:
download drivers for SP flash tools and SP flash tools program.
go and download mediatek drivers and sp flash tool.
you can get these from elephones website, google or where ever. i got mind from needarom. i used the latest versions for both.
i downloaded the 5th November 2015 firmware from elephones rom. it came pre 7-zipped. i unzipped it and left it's structure.
installing the drivers part:
you need to disable signature enforcement in your OS to install the drivers.
open SP flash tools.
load the scatter file in the official rom folder you unzipped with 7 zip.
at this point press the download button in SP tools.
switch off your phone. connect the usb cable to the phone and the computer.
you should now have the latest firmware on you phone when complete.
please note it wipes everything, so back up anything important to you.
once done, set up your apn in settings, mobile networks, access points.
wifi should work after a clean factory reset if you don't have a dodgy device.
elephone only supports 2.4ghz for wifi as far as a i know.
also make sure your network bands and are supported by the p8000.
Click to expand...
Click to collapse
Hi El_Nino9,
Thank you for the reply and sorry I am delaying my response. I have actually done some of the suggested previously once I read more on the site - thanks for the contributors here. I had Eragon 9.5.0 Custom ROM set with Philiz recovery tool after Mediatek driver download but the wi-fi is still an issue.
I will try to perform the the one suggested from you, I just have located the latest Elephone p8000 ROM on the Elephone site and will perform this on a first chance I have. - most probably on Friday.
Thanks once again and I will post an update from the outcome.
OK!
I have done the upgrade to the 05.11.15 Stock ROM.
Have made a Factory Reset and the Wi-Fi is working as before but I can't reach internet basically.
Again after attempts to get to Play Store or to or to perform a simple Google Search it comes again after message "Just a second" and after 20- 30 seconds it end up with the message.
"Google Server can't be reached at the moment please try again later."
Any help on this will be much appreciated!
Thanks a lot in advance!
P.S>
I have just discovered that the icon of the WI - FI showing a processes going on but I can't reach My Router URL for example through the Local network.
Does it mean this is really dodgy unit or I am missing any settings or there is any cure for this?
Thanks again!
saxon_fan_since_1980 said:
OK!
I have done the upgrade to the 05.11.15 Stock ROM.
Have made a Factory Reset and the Wi-Fi is working as before but I can't reach internet basically.
Click to expand...
Click to collapse
so your mobile data still works on the latest firmware? specially after typing the correct apn settings?
regarding your wifi, where is the router in relation to your position? far away? standing right next to it with the phone? whats your encryption for your wifi? tried changing that to a different type and seeing if it connects?
if you have big concrete walls and live in a nice solid building that may too cause signal not to reach. the wifi isn't that great on the device speaking from experiance in comparison to other devices.
if all fails... possibly dodgy device
El_Nino9 said:
so your mobile data still works on the latest firmware? specially after typing the correct apn settings?
regarding your wifi, where is the router in relation to your position? far away? standing right next to it with the phone? whats your encryption for your wifi? tried changing that to a different type and seeing if it connects?
if you have big concrete walls and live in a nice solid building that may too cause signal not to reach. the wifi isn't that great on the device speaking from experiance in comparison to other devices.
if all fails... possibly dodgy device
Click to expand...
Click to collapse
Hi EL_Nino9,
I guess either the p8000 not like my D-LinkDIR-655 router or I am missing something in general.
I have an extension for the other rooms and the phone connecting to a simple TP-Link with no hassle at all, but D-Link is like a brick wall - you see the wi-fy working but no internet access.
It is still a mystery.
At least is proven the wi-fi module is working.
Believe me - I have tried to alter the setting on the route and still can't get to the net content.
Will keep exploring this and will report if any luck.
Thnaks!
I´m facing the same issue here. Google-Services like Google-Photo, Gdrive, Inbox are not working. Any solutions so far?
Looks Like I have rooter WI-FI issues
kraftmaschine said:
I´m facing the same issue here. Google-Services like Google-Photo, Gdrive, Inbox are not working. Any solutions so far?
Click to expand...
Click to collapse
Hi kraftmaschine - I have discovered that my aged D-LInk DIR-655 was giving me problems dropping out the signal. I had an access through mobile network and through my other room extension rooter, so I got on mind either compatibility issue or router problem. So I have upgraded the router and voila. Everything got sorted.
Also upgrade to the latest mod - not OWA but using the standard methods described here.
Hope that helps.