i got this rom from ftp xda dev
how to extract it? and upgrade with MaUpgradeUt_noID.exe
thanks
Open it with winrar
louisboo said:
i got this rom from ftp xda dev
how to extract it? and upgrade with MaUpgradeUt_noID.exe
thanks
Click to expand...
Click to collapse
Extract with winrar.
Use nk.nbf, ms.nbf and radio.nbf. use all or just use the .nbf that you want to upgrade. put them into the same directory (folder) as your MaupgradeUt_noID as just run it.
Before that tho' put your phone on bootloader mode and connect to pc
via usb cable.
zaheer said:
Extract with winrar.
Use nk.nbf, ms.nbf and radio.nbf. use all or just use the .nbf that you want to upgrade. put them into the same directory (folder) as your MaupgradeUt_noID as just run it.
Before that tho' put your phone on bootloader mode and connect to pc
via usb cable.
Click to expand...
Click to collapse
i know how to upgrade my dopod with tmobile rom and MaupgradeUt_noID, only in jasjar rom my winrar no selection exctract file here.
what u winrar version?
use winrar 3.61! You can run this then go to temp folder to search the files!
yingzhou said:
use winrar 3.61! You can run this then go to temp folder to search the files!
Click to expand...
Click to collapse
Thanks, problem solved.
Can anybody tell me how to enter into bootloader on XDA O2 Zinc?
Or how to solve XDA O2 Zinc hung on the splash screen..
thanx
Just run rom update, you will see a hidden folder where your ROM is located. Inside the folder copy the MARS_G4.abi on ur device sd card.
Go to bootloader. press right on the directional button and reset.
You must use charger or usb to continue flashing..
Hold 'Right key' and poke the hole.
which right key please? the soft right key or the navigotor right key? and you mean hold power+rgiht key +soft reset button?....i tried, it didnt work
Need not hold "Power", just "Right Key" on the 5-way navi kaypad,hold it and press soft reset until the 3-colors screen appears.
just curious.. what can u do at bootloader mode?
ferioz said:
just curious.. what can u do at bootloader mode?
Click to expand...
Click to collapse
You can extract the ROM data file from the resource of the EXE update file, and rename it to MarsII_G4.ABI, then you can burn the ROM from mini-SD, even more, cook the ROM yourself...
cashmore said:
You can extract the ROM data file from the resource of the EXE update file, and rename it to MarsII_G4.ABI, then you can burn the ROM from mini-SD, even more, cook the ROM yourself...
Click to expand...
Click to collapse
how could we possibly cook the ROM ourselves? Could you give a head start, perhaps any tools available to cook the ROM?
cashmore said:
You can extract the ROM data file from the resource of the EXE update file, and rename it to MarsII_G4.ABI, then you can burn the ROM from mini-SD, even more, cook the ROM yourself...
Click to expand...
Click to collapse
Hello,
I've also got an O2 Zinc that's stuck on the splash screen. I've got the WM6 rom upgrade but because Windows Mobile Device Center can't connect to the device when I plug in the USB cable I can't use the rom upgrade to flash the device. Does anyone know how to upgrade the rom from the mini SD card?
Cashmore, if you know the way to extract the files from the official rom upgrade and the correct way to do the mini sd upgrade please help by posting step by step instructions on how to extract the rom, correct way to put it on the mini sd and flash it to the device. Any help would be really appreciated.
THANKS!
I want to extract the HTC_S620_WWE_1.27.405.1_4.1.13.44_02.94.90_Ship.exe in order to get the EXCAIMG.nbh file.
The means? To copy it to a FAT32 formatted SD, plug it to the phone in bootloader mode and see if it works!
1- Install win rar
2- Extract the file
Voila
.NBH has been created
buttrwp said:
1- Install win rar
2- Extract the file
Voila
.NBH has been created
Click to expand...
Click to collapse
You been diggin in the garveyard, watch out you wake the dead
tryed
I try using winrar and its not working
It is easy:
run the update (no need to connect the device)
wait for the unpack and first prompt
go to your temp directory (XP: <profile>\Local Settings\Temp\
find the latest created directory (some temporary name)
get the nbh from there.
tobbbie said:
It is easy:
run the update (no need to connect the device)
wait for the unpack and first prompt
go to your temp directory (XP: <profile>\Local Settings\Temp\
find the latest created directory (some temporary name)
get the nbh from there.
Click to expand...
Click to collapse
and how to extract in windows 7 64bit?
Solution
mobileclinic_14 said:
and how to extract in windows 7 64bit?
Click to expand...
Click to collapse
Go to
c:\users\<your user's name>\AppData\Local\Temp
Check thru date the last created directory
Don't forget to open first the update.
If you can't see the AppData directory, you need to change the folders settings to see hidden system files.
regards
(转自XDA)原文如下:
How to Flash Rom using Internal Storage Method , a safer, quicker and better way to flashing
*.Rename ..NBH file to DIAMIMG.nbh
*.Copy to Internal Storage
*.Soft Reset + Hold volume down button + back button <----
*.Follow instructions on screen
1:将刷机包xxx.nbh文件改名为DIAMIMG.nbh,然后复制到内存卡根目录下(注意字母大小写)
2:同时按住音量"一"向下键和后退"<="键不放用笔捅一下重起键直到出现图2的英文字,,
3:按一下开机键开始刷机,如图进度条,按中间的导航键取消
4:等待进度条完成显示update complete update success刷机完成!重启即可
-----------
Why my Diamond can not do it like the title?
My Diamond cannot connect by USB,just connect over bluetooth
Thanks.
And in english, you can read Suiller tut .
R. DevilR said:
And in english, you can read Suiller tut .
Click to expand...
Click to collapse
Can you show me the link of the base article?
or the method pages
Thanks
When i Press the power on,then Press Vol- and "back"menu(actual is the right botton),the screen is like this picture
apaddy said:
When i Press the power on,then Press Vol- and "back"menu(actual is the right botton),the screen is like this picture
Click to expand...
Click to collapse
...what happens after "Loading...."?
Nothing?
Install Jockyw2001's 1.23, 1.24, 1.34 Hard-SPL!
apaddy said:
When i Press the power on,then Press Vol- and "back"menu(actual is the right botton),the screen is like this picture
Click to expand...
Click to collapse
I think that this happens because you don't have an updated hardspl... or at least you are trying to flash an "un-signed" rom with a signed-only hardspl, does this happen also with stock original rom?? if you can flash in this way with stock original rom the problem is the "signed-only" hardspl
bye,
davide
cyron_at said:
...what happens after "Loading...."?
Nothing?
Install Jockyw2001's 1.23, 1.24, 1.34 Hard-SPL!
Click to expand...
Click to collapse
I'm reboot the Diamond when i had waited for a long time(about 10 minutes)
non for the "loading"
suiller said:
I think that this happens because you don't have an updated hardspl... or at least you are trying to flash an "un-signed" rom with a signed-only hardspl, does this happen also with stock original rom?? if you can flash in this way with stock original rom the problem is the "signed-only" hardspl
bye,
davide
Click to expand...
Click to collapse
I'm just only put the Hard SPL into the phone and named for the DAMING.nbh
by the phone wasn't flashing.
may be the path has some problem?my phone path has chinese because my phone system is HongKong non for the "Stroage Card"!It's 内置储存(for chinese)
Dont know if you can flash HardSPL by Internal Storage method.. You should download HardSPL and install via cable just to be safe. If flash HardSPL failed, you will probably brick your phone too.
raspdeep said:
Dont know if you can flash HardSPL by Internal Storage method.. You should download HardSPL and install via cable just to be safe. If flash HardSPL failed, you will probably brick your phone too.
Click to expand...
Click to collapse
My phone cannot connect by cable.May be my phone some problem with hardware.then the phone is newly.No people can repair it.
So I want update it by myself.
When I Press the Vol- and the Right button then Kick the little red button under the phone. It nothing happen.
I'm sorry to my poor English...I cannot write more.
Now I'm not going Download the Rom.I'm downloading the Hare SPL.in to the Phone...
WHY when I press the three button[Vol- "Back"(Right Button),Reboot(Red button)],the phone was non power on.
I had to Press the "Power",then Quick Press the Vol- and "Back"button ,the screen was different with the forum of others?
I don't know what has happen to my Diamond...
For those that are flashing stock roms (which comes in executables), you can extract the rom file (.nbh) easily, and place this stock image in ur storage drive for easy flashing should you need to restore to stock conditions (minus the SPL of cos).
Clear your temp folder (run disk cleanup)
Disconnect ur device from the PC if connected
Start the installer
Go to your Temp folder (ensure u can see hidden files). Temp folder is usually at C:\Documents & Settings\[USERNAME]\Local Settings\Temp.
Find the rom file and copy out of that folder
knave said:
For those that are flashing stock roms (which comes in executables), you can extract the rom file (.nbh) easily, and place this stock image in ur storage drive for easy flashing should you need to restore to stock conditions (minus the SPL of cos).
Clear your temp folder (run disk cleanup)
Disconnect ur device from the PC if connected
Start the installer
Go to your Temp folder (ensure u can see hidden files). Temp folder is usually at C:\Documents & Settings\[USERNAME]\Local Settings\Temp.
Find the rom file and copy out of that folder
Click to expand...
Click to collapse
_____________________________________________
When I had clear the temp of Windows? Or clear the temp files of the Diamond?
My phone cannot connect to the PC.So i have to send the Roms over the Bluetooth....Does any temp fils in the Mobile phone?
I see only very fast 'image not found' then it says' triggering USB host' for some time, before restart and non flashed.
Strange, I have the DIAMIMG.nbh file in root of internal storage.
apaddy said:
When I had clear the temp of Windows? Or clear the temp files of the Diamond?
My phone cannot connect to the PC.So i have to send the Roms over the Bluetooth....Does any temp fils in the Mobile phone?
Click to expand...
Click to collapse
You should clear the temp folder of Windows. This is to allow you to easily find the extracted rom files which will be extracted into the temp folder when you run the installer.
knave said:
You should clear the temp folder of Windows. This is to allow you to easily find the extracted rom files which will be extracted into the temp folder when you run the installer.
Click to expand...
Click to collapse
I'm update by the Phone.Is any problem with the PC?
the Extracted rom was download on the website.is correct I'm sure.
thanks.
Riel said:
I see only very fast 'image not found' then it says' triggering USB host' for some time, before restart and non flashed.
Strange, I have the DIAMIMG.nbh file in root of internal storage.
Click to expand...
Click to collapse
have u got it connected to the PC? the phone cant see the internal storage while connected to the PC...
This work great. Flashes in about 2 minutes.
knave said:
You should clear the temp folder of Windows. This is to allow you to easily find the extracted rom files which will be extracted into the temp folder when you run the installer.
Click to expand...
Click to collapse
you can use a program called Win-RAR this program makes it easy extracting executable files and many others
old thread but my phone just stays at "loading..." i cant flash crap via activasync. only 1 did work the leaked sprint rom any other for the diamond give me a connection error. im sure that hardspl crap has to do with it as mentioned above but last time i ever tried that it added a few files to my phone then proceded to load jumpspl.exe and locked my phone up and did nothing. this is a great phone and i hate to miss out on all the goodies u people are getting!!!
Hello guys...
We all know that a custom recovery is far more important thing i rooted phone. But since we're talking about mediatek,its hard to find a suitable recovery.
Now these days,its very easy to create CWM based recovery through Mtkdroidtools. But,CWM is quite a oldschool yo!!
But TWRP is awesome!! Cuz its touch based and far more easy to use...but its so hard to find mediatek TWRP,so this guide will be helpfull i guess!!
~~Requirements~~
1.A computer with Windows 7 32 bit
2.The stock recovery.img[it can be found in your phone's stock rom]
3.TWRP script>>
Download link>> htt p://www .me diafire.com/folder/ca6 n5bb8 ocu87/TWRP_an d_CWMR
Download "Port-TWRP-V2.4.4.0-MT6589.7z" file from that link!!!
Now extract that 7z file and put the folder in your computer's C:// drive.....and put your stock recovery.img in C:// too.
Now open That extracted folder and you'll see a .exe file. Run that file as administration and a command window will appear.
Now it'll ask you to put your recovery.img in C:// and that is already done. So press Enter and follow the next steps. It'll ask you too put your device's chipset,resolution....so enter correctly.
When it is all done, close that Window and you'll see a folder is created called "Ported TWRP" open it and you'll get your newly created TWRP recovery.img. Copy that in your sdcard and flash it via latest Mobile Uncle Tools and voila!! You'll be rebooted to your TWRP custom recovery!!!!!
N.B>> this process is only for mt6577,mt6589 and mt6575.
Hit thanks if you like it.
Android Devilzz[root n stuffs]
Click to expand...
Click to collapse
This seems so easy I will try it
bro it shows error found please help me