Develop Bugs

getting vendor id errore while upgrading the official wm6

im using a tytn and getting errore message
dows the official upgrade is for tytn or doopod ?
anyone can help ??
i try using hard sspl and still .. same

I think it may be because it is a rom for Asian networks... I got a similar error, and will have to manually import the settings for my network providor... other than that, everything else went fine...
I believe there are cabs kicking about this forum to auto setup for various providors.. I think it is trying to auto detect your vendor, and if not Asian, is returning the error
I think thats all the error is showing...

If you've downloaded one of the other cooked ROMs on this site, you should have an exe file called RUU_wrapper.exe.
Now, install WINRAR and right click on the dopod rom and choose extract and it will extract various files, one of which will be another exe file. Extract this exe file again and you should end up with a file RUU_Signed.nbh - this is th only file you'll need out of the lot.
You can delete all the other files from the dopod ROM now, just keeping the RUU_signed.nbh. Copy the RUU_wrapper.exe file into the same folder and run it and you will flash the dopod rom to your phone nicely - just make sure you're HARDSPL first!
Now, you could be even smarter at this point and use dutty's good nbhtool if you like to "unwrap" RUU_signed file and remove the IPL \ SPL (though with HARDSPL, I'm not sure this is necessary) and the Radio part if you like (and the boot splash screens if you're so inclined and then use it to wrap it all back up again.
HTH,
Smiffy.

how do you reinstall tilt software

ok heres what happened first i installed hardspl and then i changed my radio to 1.27.14.09 and when i restarted my att tilt the att stuff went on then nothing it never went to the main screen, now how can i reinstall a radio or just the att stock software without using activesync

Go to the bootloader - check the wiki for instructions. Connect your computer to the Tilt - you should see "USB" below the tri-color screen. Install the new ROM or radio. PM me if you have problems.
P.S. The answers to any problems you find are readily accessible in the Kaiser section.

shrshr429 said:
ok heres what happened first i installed hardspl and then i changed my radio to 1.27.14.09 and when i restarted my att tilt the att stuff went on then nothing it never went to the main screen, now how can i reinstall a radio or just the att stock software without using activesync
Click to expand...
Click to collapse
Check the wiki for sd flash. You kan rename the nbh file to KAISIMG.nbh and put it on a sd then goto bootloader and it asks you to install.

im sorry what's wiki and also I can't find software that will let me download the software without activesync does anyone have a link I can use

http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser
You should be able to find everything you need here.

i tried everything there, theirs just one problem i cant find a rom that i can use without activesync does anyone have one

When you attach the cable and go to bootloader - does it say "USB" below the tri-color screen? If so, you have communication and can flash.
What do your three lines say at the top of the bootloader (red section)?

it does say usb my computer is reading the phone i just cant find a rom that doesnt use activesync, nothing with RUU_Sign.nbh, i did use hardspl the 3 lines say
KAIS1*0 MFG
SPL-1.0.01iPof
CPLD-8

i do have a microsd card i can try and upload it through their but there is stil the problem with no activesync

so can anyone help me here

ok, since i never really seen this question answered directly anywhere, you get this freebie
how to extract the RUU_Signed.nbh file
If its a cooked rom, the file you download will *usually* be a .rar file, extract the contents with winrar. depending on how the cook packaged it, it may not be named RUU_Signed.nbh, but it will still be a .nbh file
If its an original shipped rom, the file you download will be a .exe file, again, extract the contents with winrar. There will be a bunch of files and the RUU_Signed.nbh will be one of them.

if i downlaod the original rom it just opens up a program to install it how can i extract it without using the program to connect to my phone

omg!!!!!
1. install winrar
2. right click on the file you downloaded
3. choose "extract here"
then do the flashing using the microsd card

Help on Splash Screen

Hi,
I've tried to change my splash screen according to the following instructions:
http://forum.xda-developers.com/showpost.php?p=1724556&postcount=19.
But for some strange reason, all it did was reinstalling my prev ROM.
Can someone help me understand how could it be and what is wrong?
THANKS!
content of my ROM folder:
180,736 EnterBootloader.exe
81,673,308 OLDRUU_signed.nbh
167,936 rapitool.exe
2,904 ReadMe.txt
1,441,792 ROMUpdateUtility.exe
11,256 RUUGetInfo.exe
1,249,280 RUUResource.dll
526,193 RUU_signed.nbh

meitalbd said:
Hi,
I've tried to change my splash screen according to the following instructions:
http://forum.xda-developers.com/showpost.php?p=1724556&postcount=19.
But for some strange reason, all it did was reinstalling my prev ROM.
Can someone help me understand how could it be and what is wrong?
THANKS!
content of my ROM folder:
180,736 EnterBootloader.exe
81,673,308 OLDRUU_signed.nbh
167,936 rapitool.exe
2,904 ReadMe.txt
1,441,792 ROMUpdateUtility.exe
11,256 RUUGetInfo.exe
1,249,280 RUUResource.dll
526,193 RUU_signed.nbh
Click to expand...
Click to collapse
1. Move your OLDRUU_signed.nhb file to another folder and try again
or
2. Try using the SD Card flashing method

Thank you!!
I've deleted the "OLD" file and it worked.
Do you know why it flushed my prev ROM when the "old" file was in the folder?
(Is my ROM damaged now? - because the last flush was with a file called "OLDRUU_signed.nbh"?)

meitalbd said:
Thank you!!
I've deleted the "OLD" file and it worked.
Do you know why it flushed my prev ROM when the "old" file was in the folder?
(Is my ROM damaged now? - because the last flush was with a file called "OLDRUU_signed.nbh"?)
Click to expand...
Click to collapse
No, theoretically nothing's damaged.
Maybe it flashed because of some file size or attribute check, really couldn't tell.

[Q] Error [240] file open This is STUPID

I Read and Read and Read. The surprising part is that, what I need the most there is no video nor any instruction to fix the problem.
I'm trying to flash a ROM on my tilt 2 GSM phone.
I have already HSPL it,
I did task 29 using RhodiumWAdvancedRUU.zip because I couldn't get regular task 29 to work.
Now I get a white screen with HTC on it and it doesnt pass it. So I enter bootloader and make sure that at the bottom it shows USB. (yes I do see SPL-0.85. OliNex)
Now I try to install the ROM and here is where the problem starts.
My ROM:
I dled NRG MAXSENSE ROM which is Energy.RHODIUM.29022.Sense2.5.MaxSense.Jul.08.7z
My Rhodium Update Utility (RUU) is
Rhodium_CustomRUU_v1.1.zip
I Open it and I see
CustomRUU.exe
Here is where I don't know what to do. Some instructions say that I need a .NBH file. Where do I get this file. They say it should be with my ROM.
All I get when I dl the ROM is
Energy.RHODIUM.29022.Sense2.5.MaxSense.Jul.08.7z
Format 7z not .nbh
I get the Error [240] File Open when I run CustomRUU.exe. To fix it they say
"When this error message appears, check whether the downloaded image is placed in the DIRECTORY of RUU. If, for some unknown reason, you find that the ROM image is not located in the RUU folder, you have to download the RUU and retry again."
What is the "DIRECTORY" of RUU"? Whats a directory? I never heard that term before.
Of which RUU? CustomRUU.exe?
Do I make a folder and put CustomRUU.exe in it with the Energy.RHODIUM.29022.Sense2.5.MaxSense.Jul.08.7z ?
Where is the .nbh file? Do I rename the ROM IMAGE to .nbh?
Please give me step by step. Ive read so much already and I dont know what to do anymore. Thank you for your help.

-___- I cannot believe I spent all this time for something so dumb. We should put this on the Help for NOOBS thread. The file " .7z " cannot be opened with Winzip. To open the file you have to use WINRAR. And from there we can see the Rhodium_SoftwareUpgrade.exe (RUU) and the RHODIMG.nbh files. And double clicking the Rhodium_SoftwareUpgrade.exe the software will start walking you through the process for flashing. I think it would be a good idea to add on the HOW TO FLASH A ROM that the 7z file requires WINRAR to be opened.
But thanks to the Lord I learned how to flash the Rom successfully.
--------------------
He who provides for this life but takes no care for eternity is wise for a moment but a fool forever.
-John Tillotson

Or use 7-zip!

-Jonny- said:
Or use 7-zip!
Click to expand...
Click to collapse
Too easy lol

[Q] How to downgrade my radio?

I updated my radio but not quite happy with the result. I try the PD98IMG.zip method, but the bootloader tells me that the zip is corrupted and no flash process starts.
I am not quote sure what kind of s-off sI have, but the phone was rooted the old way, no htc unlock.
The first line reads
Ace PVT SHIP S-oFF RL
Is it safe to try the Windows fastboot method.

deckoff said:
Ok, I want to replace the radio II have, and I follow this instructions, but the flash process will not strat, fastboot says the img is invalid.
My question is - do I have to rename the zip I downloade, of the extracted img itself. I did it a few weeks ago but I cannot remmeber how I did it ??
I am downgrading!
Click to expand...
Click to collapse
if the zip file you download contains the .img file and and .txt file. then yes, rename it PD98IMG.zip and put that in the root of your sdcard. Make sure that md5sum checks....flashing radios is a delicate thing.
For further help use the guide in my signature...

checksum is OK, I tried, but no txt file ??
I saw it mentioned once, but cant find a link to it, what does it have to contain, encoding, etc?

The txt file was the problem, I had to add it. Here it is for anyone who might need it.

deckoff said:
checksum is OK, I tried, but no txt file ??
I saw it mentioned once, but cant find a link to it, what does it have to contain, encoding, etc?
Click to expand...
Click to collapse
It contains the update script...find in the guide in my signature that there is one PD98IMG.zip empty folder....put the radio .img file in there and do a normal compress....then flash it in the bootloader as mentioned.

glevitan said:
It contains the update script...find in the guide in my signature that there is one PD98IMG.zip empty folder....put the radio .img file in there and do a normal compress....then flash it in the bootloader as mentioned.
Click to expand...
Click to collapse
Yeah, I managed to flash I just added the script for anyone trying to go my route, since all radios come zipped, but do not contain the txt file
PS Zips made on ubuntu will refuse to flash, ??

deckoff said:
Yeah, I managed to flash I just added the script for anyone trying to go my route, since all radios come zipped, but do not contain the txt file
PS Zips made on ubuntu will refuse to flash, ??
Click to expand...
Click to collapse
um...maybe the wrong compression in the zip file...it has to be normal compression.

glevitan said:
um...maybe the wrong compression in the zip file...it has to be normal compression.
Click to expand...
Click to collapse
Most probably, cos just dropping the txt file there will be no problems.