I've searched and can not find an answer/solution.
Does the TP2 ( i own T-Mobile branded ) have the LED status lights for when bluetooth is on (blue led), GPS is on, and WIFI? Also flashing green when radio is connected? Like the Kaiser.
Because the only time I have LED status light on is when I have missed call or sms etc. No blue LED for bluetooth and no yellow for wifi or GPS.
Thanks for the help.
PS my phone is HSPL
From what I can tell, the only time the LED will flash is if you have any type of notification/reminder. So yeah, no LED for wifi, bluetooth, connection to carrier.
Thanks for the quick reply. Was thinking of RMAing it rofl.
Can someone else also confirm this please. Just want to be sure.
Okay so no flashing green connection to carrier LED or flashing blue bluetooth status LED and no GPS/WIFI status LED <--(was yellow on some other HTC phones)?
Just want to be sure my device is working as it should be
It is working like it should be... In this case
Sorry to dig this thread out again, but I figured it would not make sense to start a new thread for this.
I would like to change the behaviour of my Status LED on my TP2. There has been an Application to control the status LEDs for the Kaiser. So my question is: Is there also an App for the TP2?
Thanks,
Don
Related
Hi guys,
is it possible to change the color of the LEDs?
My intention: Normally the LED glows green, when I missed a call or something like that it glows orange and when the accu is nearly empty it glows dark red.
Often I see the green LED in the corner of my eye and think it's orange - although I know that it's not.
So: Is it possible to change the color of the normal alarm LED into dark red? I tried no2chem_nueLED but it doesn't show the dark red LED.. :-/
Thanks in advance!
sorry to hijack the thread but is there a way to stop the led flashing all the time? the led next to the internet explorer button is constantly flashing green
hey,
Yeah I've been trying to figure out if there's a way as well. The same thing happens to me all the time. Whenever I see the green light from the corner of my eye I think it's orange too .
Anyone willing to shed some light on this?
@HungryHippo
The green lights indicate that your phone is currently connected to the Phone Network... it doesn't flash when you're out of ranch.. I don't know how to turn it off other than putting your phone in Flight Mode..
Hi there...
I think this thread is in the wrong place but ill still help
Use a regestry editor to change the leds
Disable flashing service LEDs
[HKLM\Drivers\BuiltIn\AllLEDMgr]
By doing this It WILL dissable the phone from vibrating!
As for changing the LED's colour I dont know how to but I will have a look!
Use the wiki as it is your friend!
How do you get the thing to be ON? The Green light used to be on when on charge......sadly I haven't seen the light ON now for the last 2 weeks despite it being on charge and does charge too?
Do I need to use the same registry hack to get the light to come ON?
HELLLPPPPPPPP
SPV_M3100
PAYS 3.5 ROM
HungryHippo said:
sorry to hijack the thread but is there a way to stop the led flashing all the time? the led next to the internet explorer button is constantly flashing green
Click to expand...
Click to collapse
Weird ... the same thing happens to me, too! I thought it was my aging eyes ... though I KNOW I'm not color-blind. But yes, when seen with only peripheral vision, it often appears to be the amber color. Very strange perceptual event here.
u could try using the nueled software in the dev and hacking forum not sure if it works like it should tried it once but u can always try it
yeh, nueLED has your best options...here's the thread:
http://forum.xda-developers.com/showthread.php?t=371391
The reason your peripheral vision sees a different colour is that the LED isn't actually one LED - it's two. Probably red and yellow. This allows it to display
3 different colours, ie.
R = Red
Y = Yellow
R+Y = Green.
The R+Y is probably created by high-speed alternating between red and yellow. Your peripheral vision detects one colour only, probably because there are far less colour receptors at the side of your visual cortex than near the centre and they only register the one colour. As soon as you look directly at it, more rods/cones come into play and your brain then interprets what it's seeing as the blended colour, green.
The above isn't exactly correct, but it's close enough so you get the idea....
Amber
Hi!
I have another problem/request. Since I am not with my phone all the time I would like the Amber LED to flash if I have a missed call for indefinite time (until I check the calls) and not only for a limited period (and then changing back to green). It was already implemented in TNT6.0 SE ROM.
Is there only a question of some registry change (and which)?
antonof said:
Hi!
I have another problem/request. Since I am not with my phone all the time I would like the Amber LED to flash if I have a missed call for indefinite time (until I check the calls) and not only for a limited period (and then changing back to green). It was already implemented in TNT6.0 SE ROM.
Is there only a question of some registry change (and which)?
Click to expand...
Click to collapse
If you go to settings>sounds¬ifications>notifications>Phone:missed calls
You can change the Flash Light For value to NO LIMIT. Default is 15 mins.
Hope this helps
Dave
Sure it helps.
Thanks a lot.
douginoz said:
The above isn't exactly correct, but it's close enough so you get the idea....
Click to expand...
Click to collapse
Especially since yellow+blue=green.
hmm
yeah... nueLED doesn't work on my hermes. It doesn't give me the address of the red LED...
But the LED light does not light up AT ALL?
Has the LED blown?.....Didn't think thta was possible since its not a Bulb?
I noticed that Signal Reception Led is not blinking .
I can see it working sometime and sometimes not.
It is also same for bluetooth led. When I turn bluetooth on, blue led doesnt blink.
Is this hardware issue or software probkem? Can anyone help?
I dont think it has this function (the last device has this function if i'm not mistaken is htc tytn [hermes] ). Its only for notification like new sms, etc. like circle LED light on touch pro (raphael)
Light only flashes when it's told now. Doesn't flash for reception any more. For the record the TyTNII had it.
Mine flashes when I have a new text message or when GPS is on.
That really sucks...
I had a HTC Touch (elf) before, and it works nice to quickly see if bluetooth is on.
also when battery runs out (less < 5%) it blinks red, but not on this device...
could it be done by a hack? or is it just a dual color led?
thank man. I was worried that there is a problem with my device which I received 3days ago.
neforce said:
That really sucks...
I had a HTC Touch (elf) before, and it works nice to quickly see if bluetooth is on.
also when battery runs out (less < 5%) it blinks red, but not on this device...
could it be done by a hack? or is it just a dual color led?
Click to expand...
Click to collapse
There will be flashing amber light when remaining batt level is below 10%.
yeah, it goes blinking orange-like color. but it would be nice if it blinks red when it is nearly empty...
why does they always reject the good features....
I
sorry my ing., but i have a prob with my notification LED's.
i dont no what i do but i only have the red led notification, when i plug de AC power to charge.
the outher LED's dont do anything.
there is anithing to resolve this???
tks
What other LED's? There is only 1 led. It is red when charging or green when fully charged. Or green blinking for mail or sms or missed call. The little plastic on the other side is your light sensor.
yes, yes. that's my prob.
i only have the red when charging or green when fully charged.
i dont have the green blinking for mail or sms or missed call, etc.
I have the same problem: When charging, no blinking.
PqRambo said:
yes, yes. that's my prob.
i only have the red when charging or green when fully charged.
i dont have the green blinking , etc.
Click to expand...
Click to collapse
my led is not blinking too for mail or sms received or missed call
Hello
I found the solution to my problem.
after seeing what went wrong and where. I came to the conclusion that for some reason I got the option: flash light for ... = Disable.
all you had to do was go to:
- Settings
- Sounds and notifications
- Notifications
- Event (events with an option for flash light, put enable)
I hope I have helped.
thanks
exactly what I am looking for!
thanx for the tip!
greerz
Kjoere
This was already set at my TP2.
But when charging, it doesn't start to blink, it stays burning.
Well, ronh!
Now I have the LED notifications working.
It was enough, but in your case, I think, only just by changing a key in the registry or with a hard reset to see if everything returns to normal.
Indeed. the led charging is prior to led notification. So no notification when charging. Maybe someone knows a reghack for this?
Any hack to change the LED settings?
example:
blinking green to indicate signal coverage
blinking amber for missed calls, message etc.
Pretty useful if we're in a rural area and need to quickly see if we have coverage or not without turning the phone on.
posted a similar request here: Posted a similar request here:
http://forum.xda-developers.com/showpost.php?p=4306289&postcount=9
PqRambo said:
yes, yes. that's my prob.
i only have the red when charging or green when fully charged.
i dont have the green blinking for mail or sms or missed call, etc.
Click to expand...
Click to collapse
ronh said:
I have the same problem: When charging, no blinking.
Click to expand...
Click to collapse
Did anyone find a solution for this problem? My TP2 has no notification LED when it's charging.
It's driving me crazy. I never know if I have Email until I unplug the TP2. My Treo blinked like mad, plugged in or not.
Hello,
I just got a touch pro2 lastweek and I am beating my head trying to figure out what the deal is with the status notification LEDs
I see one to the LEFT of the earpiece/speaker that flashes green every few seconds and then just stops - all the flashing stops. I'm thinking the bliking stops when the phone goes to sleep. So i press the power to wake the phone - but the flashing doesn't come back. I was thinking this is the network/signal indicator but doesn't seem that way.
I see another that's to the RIGHT of the earpiece/speaker that doesn't go on at all.
So no way to tell if the phone is on wifi network or if bluetooth is on (without obviously waking the phone up and checking on screen). I'm looking for a way to see status without touching the phone - like my old HTC TyTn (rest in peace!)
It turns red when you charge you're phone.
It turns green when you are fully charged (with the charger still in)
It blinks green when you have a new message/e-mail/missed call.
It blinks red when you're batterie is almost empty.
That are the basics
thanks! that's about what i seemed to have gathered too... what about that fake light like thing to the right of speaker? never lights up?
and no bluetooth/wan notification ten, right?
armedmetallica said:
thanks! that's about what i seemed to have gathered too... what about that fake light like thing to the right of speaker? never lights up?
and no bluetooth/wan notification ten, right?
Click to expand...
Click to collapse
thats the light sensor for the screen
adjusts brightness depending on how much light is hitting the phone
Below is a description of the LED lights straight from the manual that came with my Tilt2.
* The Notification LED shows a:
Flashing green light when there are new SMS, MMS or email messages, missed calls, or reminders.
Solid green light when the device is connected to the power adapter or a computer and the battery is fully charged.
Solid amber light when the battery is being charged.
Flashing amber light when the remaining battery level reaches below 10%.
jcterry said:
Below is a description of the LED lights straight from the manual that came with my Tilt2.
* The Notification LED shows a:
Flashing green light when there are new SMS, MMS or email messages, missed calls, or reminders.
Solid green light when the device is connected to the power adapter or a computer and the battery is fully charged.
Solid amber light when the battery is being charged.
Flashing amber light when the remaining battery level reaches below 10%.
Click to expand...
Click to collapse
That's pretty much exactly it. There is a program floating around that allows you to change the light and customize the reason it flashes, but I think it's just fine the way it is .
it also flashed green then the red light really quick when its overheating :O
thanks for the quick replies folks.
I saw that in the manual too - but i never go by the manuals! i can't count how many times my manuals have been wrong about a particular function.
it's a disappointment since the older Tytn was much more friendly about the notifications. but i'll deal with it.
as far as that being a light sensor - i think it makes sense. I'll try trick it to see what I notice. Then I'm guessing it's the proximity sensor that's around the HTC logo? I think I was in the sun when I saw it but there's some sort of sensor around there. I figured that's the light sensor. perhaps not.
Thanks again!
I've looked around a fair bit and haven't found anything, but does anyone know of a good way to get a constant blinking status light on the Rhodium (specifically Tilt2)? My old Kaiser had a blinking green light to indicate network status, which was useful, not only for verifying that the phone was locked onto the cell network, but also for finding the phone at night, or in a pitch black room. Also, there was an excellent tool "kaiser notification" that let you configure all the different lights, and events attached to them.
I know all about the stock ways of adjusting the led notifications (for missed call, new text, new email, etc) but i wanted to know if anyone knows of a tool to customize the led notifications, or of any way to make the light blink continuously when the phone is sleeping, but connected to the cell network.
Thanks in advance for any input!