help....... - Upgrading, Modifying and Unlocking

hi evry one...i have a problem with my ks20...i installed application from htc, opera browser build for wm6.1 or 6.5...at first it worked but after soft reset my phone dont open anymore...it stock on the bootloader showing lg icon only...is there anyway for me to hard reset my ks20...please help if somebody knew or experienced this....thanks

Workaround
Turn of your device, press these buttons (volume-down, call and on/off) at the same time and count 20

Related

xda zinc rom?

i need the rom of the xda zinc, my zinc is not working proberly, and therefore i think a clean sweap and and a rom , will solve the prblem.
the following problems have occured:
keyboard does not function
camera icon is not in today screen or programs screen
camera will not start up
problems with charging
have to make to many resets a day
all these problems have occured and i hope somebody will help, btw, i have done several hard resets
regards peter
the netherlands
hard reset
volume-up + power + soft reset and seleck softkey left

Revive URGENT PLEASE VERY URGENT

Hi all
I have a problem with my PDA (Qtek S200)
IPL 2.10.0001
SPL 2.G4.4PDA
GSM 02.69.21
THE 7.0.0.7
And it is this:
Made a backup of my contacts over SPBackup, did the flash ROM of everything he turned to run normally, I made the restores the contacts and SMS, ... and when it does reebot it is only by the initial image that presents the data above:
IPL, SPL, ...
We have tried to make the soft-reset (pen of the button and the small button on the camera and nothing)
My question: Does anyone know how solve this?
Best Regards and thanks
Bye
Anybody help me ?
Please it's very urgent...
thanks all
can you do a hard reset using the keys and see if that allows the device to boot again ?
reading your post again, i assume that is what you are trying to do with the camera button when resetting, hmmmm
Ok, if i were you, i would try this next.
Enter bootloader mode by doing the following
To enter bootloader, you need to hold the comm manager button and soft reset
If that allows you to enter bootloader, then try reflashing the rom
let us know how you get on after that.
also it might be worth posting in the forum for this device, if you havent already.
hard reset.....To perform a hard reset
Z3nD3n said:
Hi all
I have a problem with my PDA (Qtek S200)
IPL 2.10.0001
SPL 2.G4.4PDA
GSM 02.69.21
THE 7.0.0.7
And it is this:
Made a backup of my contacts over SPBackup, did the flash ROM of everything he turned to run normally, I made the restores the contacts and SMS, ... and when it does reebot it is only by the initial image that presents the data above:
IPL, SPL, ...
We have tried to make the soft-reset (pen of the button and the small button on the camera and nothing)
My question: Does anyone know how solve this?
Best Regards and thanks
Bye
Click to expand...
Click to collapse
To perform a hard reset
* Press and hold the CAMERA and COMM MANAGER buttons, and at the same time, use the stylus to press the RESET button at the bottom of your device.
Hello again ...
I am happy. Have back by my Qtek. had already done several times the Hard-Reset the PDA but always without success. I often followed and there began to anything on screen (the 3 colored bars, then asked the question of "send ..." where we have to press the green button "call") and then there came into bootloader and there could . He began to install everything right and it was if he had installed a Rom "new".
To all those who contributed to this "happy ending" my thank you very much.
sry my english
Bye and thanks

Big problem with frozen screen and posible solution dont work, please help me.

First thank's for four help and read this thread.
The problem is:
My exca100 the last week work fine but the monday the exca reboot and frezeeng in green WM screen, i leaves it all night but it does not continue.
I try reflashing but the problem is, the image is corrupted (I cant unlock the exca, so that it does not initiate windows)
Can any one help me.
ONLB 1.30.0000
SPL 1.30.0000
Brightstar shiped 1.30.514.2
labtelcel said:
First thank's for four help and read this thread.
The problem is:
My exca100 the last week work fine but the monday the exca reboot and frezeeng in green WM screen, i leaves it all night but it does not continue.
I try reflashing but the problem is, the image is corrupted (I cant unlock the exca, so that it does not initiate windows)
Can any one help me.
ONLB 1.30.0000
SPL 1.30.0000
Brightstar shiped 1.30.514.2
Click to expand...
Click to collapse
what do you mean by( I can't unlock the exca)?
Hard Reset
Hard Reset will most likely solve the problem. I had the same problem.
TO HARD RESET:
-Turn off the phone
-Hold 2 soft keys
-press the power button for 3-5 seconds(still holding two soft keys)
-black screen will show up saying that pressing send key(green) will restore your settings to original settings.
-press send(still holding two soft keys)
-the end.
NB: YOU'LL LOSE YOUR PHONE'S DATA.
For Hard-Reset see sticky "a picture tells a million words"
The hard reset dont work, frezz in HTC screen I wait 2 hrs.
I dont want unlock, I want normal funcions.
labtelcel said:
The hard reset dont work, frezz in HTC screen I wait 2 hrs.
I dont want unlock, I want normal funcions.
Click to expand...
Click to collapse
Don't understand bolded?
You have tryed Hard-Reset not work, remove battery for about 5 mins and replace, try again "Normal boot then if not work try Hard-Reset"
Sorry for my poor english, Im from mexico.
I try the master reset many times it does not work, of several ways, extracting the battery for 5 minutes, 1 hr, 3 days, and it does not complete the reset, freeze in the htc screen, or another times in windows mobile logo screen.
When attempt to change the flash (for solving the problem) the process does not continue of 3%, this happens so I cant execute the jump USPL aplication.
In summary:
reset hard not work (hold 2 soft keys / turn on / black screen / send key)
Change the Rom for repair de damage not work (I cant load the aplication for jump USPL)
Write Rom direct in the bootloader (3 color screen) not work (hold camera button and tur on)
Any idea?
Change bootloader?
Another powerfull rom?
Special software?
Special combination to delete all in the internal memory without entering Romupdateutility locks or windows?
Please helpme to recover my excalibur.
this is so easy to fix,
your old rom now crashed, hardreset can't help you,
to repair,just download a new rom then open bootloader mode.
boss_of_any_phone said:
this is so easy to fix,
your old rom now crashed, hardreset can't help you,
to repair,just download a new rom then open bootloader mode.
Click to expand...
Click to collapse
Just shows sometimes can miss the obvious, bootloader in sticky & flash original ROM in stickys too..
Dont work the reflash in bootloader (try 10 times), I flash the rom and the phone frezz in the same screen (WM logo screen).
Help.

hard reset touch pro2-please help-i cant do it

hello to you all all the member here
i buy htc touch pro2 from us 2 weeks ago,and i install hebrew program into it.
after i install it, it ask me to make soft reset then i did it and after that all i see it black screen with the word HTC on it.
its all i can see now. i was trying to make again soft reset maybe it help but nothing is moving there.
i was trying to make hard reset by presing there and all i see is 4 COLORS AND IT SAID DOWN THERE THE WORD SERIAL and there it stop.as i can know it must move to another screen to ask me if i want to delet and then press volum up then he make the hard reset but he stuck on the screen where is the 4 color.
i realy dont know what to do now.
please, if some one know what to do please help me with it.i realy love this htc pro2.its realy beautiful.
its my first time sending here anything and asking for help.
please help me !!!!!
yours
read the wiki
all that info is in the wiki, but here goes; with the phone OFF press and hold the send and end buttons then press the power button. follow on screen instructions
i just want to make sure you get what i ask
hello members all
i know the things about hard reset, im asking about what i have now in my htc.why i cant do hard reset?
for now i see in my phone the word HTC ON BLACK SCREEN.
i press to make hard reset but not responding anything.
even i cant connect to pc with the phone.
when i make soft reset i see same word again HTC.
ALL THAT HAPPEN WHEN I INSTALL THE HEBREW FILE THAT CALL PARAGON.
so what shell i do next ?
i cant put new rom , i cant make hard reset, i cant connect to pc.
and i have this phone only for 2 weeks.
all i see lots of people here same problem with TP2 to make hard reset.
is that the problem with that htc or what ?
yours
prince !!!!!!!!
1. While the HTC Touch Pro 2 is off, press and hold Talk/Send, End and Power until you see a message on the screen about deleting all data.
2. Release the buttons after the message appears.
3. Press the Volume Up button.
soft reset your phone, then turn it off and try hard reseting again
Remove the battery first to power it off (if that wasn't clear), then replace the battery and hold in send/end while pressing the power button.

restart message showing

Please help me!
My M8 keeps showing me a message to press the power and volume up buttons to restart. When this message shows my power button doesnt work to lock or unlock the screen and when i press the home button it takes a screenshot.
Tried to restart and reset the phone but it doesnt help! I also didnt install any new app other than updates.
Android Version 4.4.4 HTC Sense 6.0
bump. Same thing has happened to me. Factory reset didn't resolve. Anything else clever I can try?
End of my tether with it! I presume it's not a common fault.
I have the same issue. It started happening to me today. Didn't do anything to my phone to cause it. Restarting and updating my apps did not fix this.

Categories

Resources