Develop Bugs

No GPS find with TOMTOM7 on artemis

hi
i have upgrade my device with oops black rom it work perfectly and install TOMTOM7. It work but my device don't find gps signal. I configured it with external on port 4 with 9600 bauds.
If someone can help me it would be fine.
Thanks

Tomtom doesn't Work... So use a real navigation software
neosub said:
hi
i have upgrade my device with oops black rom it work perfectly and install TOMTOM7. It work but my device don't find gps signal. I configured it with external on port 4 with 9600 bauds.
If someone can help me it would be fine.
Thanks
Click to expand...
Click to collapse
-> So it is time to use the wonderfull and much more better iGo 8

where i can find it ?
Thanks

neosub said:
where i can find it ?
Thanks
Click to expand...
Click to collapse
good shops

DrakkoFR said:
-> So it is time to use the wonderfull and much more better iGo 8
Click to expand...
Click to collapse
Says who , I've tried tried both and TomToms the better App imho

Tomtom 7 works fine here
try another rom

tom tom 7 worked automatically for me with oops

neosub said:
hi
i have upgrade my device with oops black rom it work perfectly and install TOMTOM7. It work but my device don't find gps signal. I configured it with external on port 4 with 9600 bauds.
If someone can help me it would be fine.
Thanks
Click to expand...
Click to collapse
Hi, i think you must set gps windows settings first: i set COM4 on "GPS data PORT" and NONE on "hardware GPS port" (with 4800 Bauds)
Than flag the option about the automatic GPS configuration
After, you should try different gps configuration by TOMTOM menu (my current setting is "integrated GPS", and it works"),
but other configuration (like "external GPS") could works.

What is your Artemis?
P3300 or SPV M650?
If it is SPV M650, use the patch called "Kulbutor"

I got a spv M650 myself and never had to do anything

Zetsumei said:
I got a spv M650 myself and never had to do anything
Click to expand...
Click to collapse
If you've got a SPV M650 and want to keep the A-GPS function with another cook Rom than Aje's Rom, you must do it, no choice
It is available for B&B Rom, Artemis Touch Rom....

GPS Problem

Hello u guys, thks for all your effort for bringing to this comunity all your hard work and dedication.
After reading a few posts i still cant understand what am i doing wrong to activate my HTC P3600 GPS.
I have a ROM that supports GPS. I have configurated the gps definitions in "definitions"+"connections" to GPD1 COM9 and AUTO.
When i trie to open TOM TOM the application says that no GPS device is found..
Any tougths?
Thks for all you support.
Kind Regards.

Try this one maybe it can help you its the newest Radio Rom for Trinty.
http://rapidshare.com/files/128988264/Trinity_Radio_1.56.70.11.rar.html

poetamulder said:
I have a ROM that supports GPS. I have configurated the gps definitions in "definitions"+"connections" to GPD1 COM9 and AUTO.
When i trie to open TOM TOM the application says that no GPS device is found..
Any tougths?
Thks for all you support.
Kind Regards.
Click to expand...
Click to collapse
If you are using TomTom v7, you must configure your GPS as 'Other NMEA GPS receiver', '57600 baud', and 'GPS in COM 9'. It is different from TomTom v6.
I hope that was it, but if not, be sure to let us know so we can help you get it working.

IGO8 and TMC

Friends I must tell you - IGO8 is working very well on the Pro2
Now even that there is thread could you help me to run TCM
I`m so close to have the solution for IGO and TMC ...but I need just a little help.
I do habe IGO8
beemer and hyper is installed
by the way when I test hyper it finds GPS informations
Radio is running
My IGO8 is using COM4 and I have a Pro 2
AND I changed the system ini and it looks as follows:
[tmc]
auto_tuning="1"
saved_config_available="1"
saved_config_classname="NMEA_GPSTMC_ROYALTEK"
saved_config_portname="COM"
saved_config_port="4"
saved_last_tuning_mode="0"
saved_last_frequency="958"
What is missing ?
THANK YOU

I'm using a standalone GPS/TMC adapter (over bluetooth) for TMC info; GPS comes from the internal GPS chip.
iGO8 didn't recognize my TMC until I added the following to my system.ini manually:
[tmc]
auto_tuning="1"
saved_config_available="1"
saved_config_classname="NMEA_GPSTMC_ROYALTEK"
saved_config_portname="COM"
saved_config_port="2"
saved_last_tuning_mode="1"
saved_last_frequency="1027"
After that it worked perfectly. Not sure whether you should use the ROYALTEK-protocol for TMC over the internal FM-radio too though.

Hi guys,can you tel me please which version of igo8 you are using exactly?i'v had a HD before tp2 but now it sames not compatible with my new device.

Using 8.3.2.83157 here, which works perfectly.

Blackbird-ce said:
Using 8.3.2.83157 here, which works perfectly.
Click to expand...
Click to collapse
Thank you very much for your replay,i have an Italian Rhodium version,i should modify something in text.sys file?

I have following Issue with my Igo8: After using my TP2 a while, when I want to start Igo8 (the latest version by the way) I get following error:
"failed to reserve virtual address"
After I have made a reset, Igo8 starts flawless. Does someone else have the problem too? And can anyone have a solution for this?

mdaaddic said:
I have following Issue with my Igo8: After using my TP2 a while, when I want to start Igo8 (the latest version by the way) I get following error:
"failed to reserve virtual address"
After I have made a reset, Igo8 starts flawless. Does someone else have the problem too? And can anyone have a solution for this?
Click to expand...
Click to collapse
I have the same problem too, what I did was usually I disable the T3D before I run the iGO8 (8.3.2.x), this usually help without have to reset my TP2. That is why iGO support said they did not cerified it work on TP2 (even most people said it work great on TP2). Used at your own risk.

TMC on rhodium with topaz radio ????

As can be read in the tmc thread somewhere on xda, the hypergps driver and gfmapi do not fully support the rhodium yet.
But the Topaz is fully supported and users report working tmc there with Igo and Navigon.
In the radio rom thread in the rhodium rom development is stated that it is possible to flash topaz radio's on the rhodium.
Now my question is if it is probably that the hypergps will work on the rhodium with a topaz radio rom? And if it is possible to flash a topaz radio rom with only hardSPL or is it neccessary to security unlock the phone with some tool??
Anyone tested a topaz radio already??

Would like to know whether this is possible also.
From what I understand, this would require you to security unlock the phone to flash the topaz radio. But as to whether this will all work on a tp2 using a topaz radio, is what we need to know...

Well, the problem with Rhodium is not the ROM, but the HW radio module and its driver (different to Topaz) ,which is not giving the raw RDS data. So you must wait (and me also) until the driver is hacked.

Make Broadcom/Widcomm BT stack work on WM6.5

Does anyone know how to make the Broadcomm/Widcomm bluetooth stack work under WM6.5 (I am getting this under build 23518, and haven't tried any other versions of WM6.5, device is Asus A626 pocket pc)? I keep getting message in both the settings manager and the initial bluetooth manager about a missing component or resource. What component could it be referencing, and how can I fix it?

Steven855 said:
Does anyone know how to make the Broadcomm/Widcomm bluetooth stack work under WM6.5 (I am getting this under build 23518, and haven't tried any other versions of WM6.5, device is Asus A626 pocket pc)? I keep getting message in both the settings manager and the initial bluetooth manager about a missing component or resource. What component could it be referencing, and how can I fix it?
Click to expand...
Click to collapse
Define the ver of your broadcomm. Normally my old stack (original) from wm6.0 works without issues in 6.5 builds. It's 1.7.1.9701 as far as I remember

AndrewSh said:
Define the ver of your broadcomm. Normally my old stack (original) from wm6.0 works without issues in 6.5 builds. It's 1.7.1.9701 as far as I remember
Click to expand...
Click to collapse
Andrey, any ideas to make it universal for devices with msstack?
Getting no sound and no touch after installing.

heineken78 said:
Andrey, any ideas to make it universal for devices with msstack?
Getting no sound and no touch after installing.
Click to expand...
Click to collapse
You mean - to make my stack applicable for BT MS devices? No, that does not work. It's OEM hardware driver.

spasibo

AndrewSh said:
Define the ver of your broadcomm. Normally my old stack (original) from wm6.0 works without issues in 6.5 builds. It's 1.7.1.9701 as far as I remember
Click to expand...
Click to collapse
The version of the Broadcom stack that I have is version 1.8.0 build 4800.

Steven855 said:
The version of the Broadcom stack that I have is version 1.8.0 build 4800.
Click to expand...
Click to collapse
Upload your BT OEM Package - I will have a look. I will run it on my device and try fix if it does not work (hopefully but not for sure )

can any1 make 1 widcomm bt stack for htc touch pro? im using energy rom 6.5.3.
i need it cos the bt headset that i bought(SE mw600) communicate with this bt stack for caller name and song title.
appreciate all help..
Thanx