bonjour à tous, voila j'ai mis à jour mon TP2 avec la dernière rom officiel (French- ROM version 1.19.406.1) mais depuis j'ai des problèmes avec ma connexion wifi, en effet dans la partie communications des paramètres, l'option WLAN est grisée, il m'est donc impossible de l'activer, et si j'arrive à l'activer il se déconnecte au bout d'1 minutes. Quelqu'un aurait-il une idée ?
Merci de votre aide.
-------------------------------------
Hello all,
I updated my TP2 rom with the latest official (French-ROM version 1.19.406.1) but since I have problems with my wifi connection, in fact in the communications settings, the option is grayed WLAN, I find it impossible to activate it, and if I can turn it off after 1 minutes.
Someone would have any idea?
thank you for your help
This might help
http://forum.xda-developers.com/showpost.php?p=4335192&postcount=245
Gordon
thank you for your link, but it did not solve my problem, I find against just after, the wifi does not work. In fact, if my TP2 is connected to my pc usb wifi turns off and come back as soon as I unplug the usb. I was not this weird problem with the old rom.
Ben
Same with my TM TP2 when its connected to USB I have no wifi
there's a setting in activesync/mobile device center under connection setting, called "allow data connections on device when connected to PC" check it.
Thx a lot Mihii.
problem solved !
Related
Bonjour à tous,
Je post ce message car beaucoup de personnes ont de problème pour avoir la TV avec WM6 chez SFR. Mon problème est lié au faite d'avoir le WAP SFR sans image. Ce qui donne alors un message d'erreur du type : "service accessible que par un téléphone 3G ou réseau 3G" lorque l'on clic sur Canalsat (que l'on a dû cherché car pas visible).
J'ai fait beaucoup de forums et essais mais toujours sans succés. Les modifications de la base de registre (toujours avec un soft reset après), les fichiers CAB de configuration automatique et bien sur l'appel de SFR (on vous rappel dans les 5 jours car je ne sais pas), tout ça ne donne rien.
En plus pour bien faire une personne de SFR m'a dit qu'à chaque connexion WAP, cela coût 0.5€. Donc pour les essais cela coûte cher (ils vont devoir rembourser).
Dans l'attente de réponses intéressentes...
bushidokun said:
Bonjour à tous,
Je post ce message car beaucoup de personnes ont de problème pour avoir la TV avec WM6 chez SFR. Mon problème est lié au faite d'avoir le WAP SFR sans image. Ce qui donne alors un message d'erreur du type : "service accessible que par un téléphone 3G ou réseau 3G" lorque l'on clic sur Canalsat (que l'on a dû cherché car pas visible).
J'ai fait beaucoup de forums et essais mais toujours sans succés. Les modifications de la base de registre (toujours avec un soft reset après), les fichiers CAB de configuration automatique et bien sur l'appel de SFR (on vous rappel dans les 5 jours car je ne sais pas), tout ça ne donne rien.
En plus pour bien faire une personne de SFR m'a dit qu'à chaque connexion WAP, cela coût 0.5€. Donc pour les essais cela coûte cher (ils vont devoir rembourser).
Dans l'attente de réponses intéressentes...
Click to expand...
Click to collapse
Sure, why not
I'm down with what swtaltima said, take it to the bank!
@swtaltima - please post in English, you'll find many good people here that will try and help you my brother!
I agree this is an English Forum! Merci!
@Dr; I think U meant @bushidokun in U'r post.
@galaxys
Sorry brother! When I try and speak French I'm like Gomez Adams speaking to Morticia, LOL! (But John Astin does it much better than most of us Yankees, LOL again!)
(I'm referring to the Adams Family TV show for those who mite be confused by my ramblings...)
Ok go for english.
I post this message because many persons have problems to have the TV with WM6 to SFR. My problem is linked in made to have WAP SFR without pictures. What gives then a message of error of type: " approachable service that by a telephone 3G or network 3G " when i click on Canalsat link.
I have tried many modifications in registry (with softreset after), CAB files to configure the operator but it's allways the same. So il called my operator SFR but they don't know why. I'm waiting for callback of SFR.
Wainting for good answers...
PS : Sorry but i've used translator for few things.
With Schaps 3.60b my Belgium Vodafone Live TV is working fine. Notice that I must be connected with "Vodafone Live" connection.
This by default ... as SFR is also vodafone
I've now switched to Kaiser s
bushidokun: You message says, you must be logged in the 3G network to use the service. So just verify:
1. Hermes is logged on to 3G, not GSM network.
2. you use correct APN for the TV system (orange.fr has separate APN for tv) in you internet connection
3. Service you try to use is supported by Hermes software (does SFR sell hermes? under what name? try to ask for support for this device, if they don't sell it choose different but similar windows-based device and "play fool" saying you have that one. This method I received some help when configuring my BlueAngel in Orange: I said I have SPV M3100)
And the rest is you knowledge and research or asking smb thet knows more about SFR services and PocketPC compatibility of those services.
No problem with the network. When the WAP is connecting, a H is replace the 3G.
But i have done a test by downgrading in WM5 with the official Vodafone ROM 1.23.163.5. I didn't modify anything and i've got the WAP with pictures. And miracle : the TV was there. And fine working. So i backup the registry to analyse.
After all, i upgrade with HTC offical 3.54 : don't work. always no pictures.
Another upgrade to Shaps 3.57a FRA : working on registry...
IT'S WORKING
I used this link to help me but the values are not the same :
http://wiki.xda-developers.com/index.php?pagename=Hermes_Cooked_ROMs_QA_Schaps357a
This values came from my WM5 registry.
I don't know if they are all necessary but...
So this is the job :
[HKEY_LOCAL_MACHINE\Security\Internet Explorer\User Agent]
"CustomBase"="Vodafone/1.0/HTC_Mercury/1.23.163.5/Mozilla/4.0"
[HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Internet Settings]
"UAProf"="http://www.htcmms.com.tw/voda/v1605-1.0.xml"
[HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Internet Settings\5.0\User Agent]
"Version"="MSIE 4.01"
@="Vodafone/1.0/HTC_Mercury/1.23.163.5/Mozilla/4.0"
"Desc"="Default (Windows CE)"
"UA-Language"="JavaScript"
"Platform"="Windows CE"
"Compatible"="compatible"
[HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Internet Settings\5.0\User Agent\Post Platform]
"MIDP-2.0 Configuration/CLDC-1.1; PPC; 240x320"=""
[HKEY_LOCAL_MACHINE\Software\Arcsoft\ArcSoft MMS UA\Config\mm1\WspHeader]
"User-Agent"="Hermes-1.0/arcsoft-mmsua-3.2.0.xx"
"x-wap-profile"="http://www.htcmms.com.tw/gen/hermes-1.0.xml"
"Accept-Language"="fr"
Now i start to install all my others softs.
Thanks.
hello
Yesterday, I tried to pass my rom faman 3.5 to another on the forum.
I didn't manage to establish the connection then I threw since the telephone the software trin unlock. The three-colored screen appeared.
I threw the rom update utility of the new rom and there that works.
Once to 100%, message of success and there, the remained telephone blocked on the logo htc to the starting, no button answers, inefficient hard-reset, obligated to take-off the battery.
I don't have a telephone anymore, help me!
thank you
I can access to boot loader by pressing power and camera touch.
Vista take a bip when i connect usb but i can't make another rom, error 260 or for anyone rom, just 1% of install and nothing.
hi
There is a post for the Roma oggi chanvi and that would tell you which version.
1 rom the small faman of 6.0 is
2 small Reflash your bootloader I'll crash council 9.99 Zack croft
you can find it on xda or trinity guide.
Password after your radio 1.56.70.11
and after bootloader still reflash the rom and there you veras everything is ok
Il y a un poste pour la rom chanvi et oggi se serait bien que tu dise quelle version .
Petit 1 la rom faman c'est du 6.0
Petit 2 Reflash ton bootloader je te conseil des crash 9.99 de zack croft
tu peut le trouver sur xda ou sur trinity guide .
Apres passe ta radio en 1.56.70.11
et apres toujours en bootloader reflash la rom et là tu veras tout est ok
Oggi
Team Chanvi and Oggi
Merci mais j'ai du le retourner au SAV en espérant qu'ils l'acceptent car je n'avais que ce téléphone.
Réponse dans deux semaines.
Je donnerai des news.
Friday, my phone come-back from sav and after a motherboard replacement by htc, no battery charge and no sim card detected. Return to htc for the second time with my congratulations.
[FR]
Bonjour à tous,
Voilà je poste ce message car j'ai un petit soucis avec le GPS sur la rom aje_fr 3 beta 3 sur mon HTC P3300.
Enfait j'ai installer Tomtom 7 qui fonctionne nikel sauf que j'ai un petit soucis...
Le signal ne tiens pas du tout!!! lorsqu'il ce connect, il tien environ 2 sec puis le signal s'interromp pendant 1min. Puis il ce reconnect pendant 2 sec puis coupe a nouveau pendant 1 min et ainsi de suite...
Y'aurait il un patch, un driver ou une config qui me permettrait de corriger ce soucis?
Merci d'avance pour votre aide.
[EN]
Hello all,
I post this message because I have a little problem with the GPS on my HTC P3300 fashing with aje_fr 3 beta 3.
I have installed Tomtom 7 and it seems to be work find.
My problem is about the GPS signal who is lost every 2 second for 1min everytime. After 1 min, the signal was found but keep up for 2 sec and lost for 1 min again...
Do you know how can I solve this issue? Can I download a new driver or patch for my P3300?
Thanks a lot for your help.
NB : Sorry for my bad english
Hello,
I have in my possession a htc wildfire s, I root, and then return to original version, everything worked well until suddenly the usb driver does his most recognized. When I plug the USB wildfire s, it loads the phone, but does not offer any other choice. I already look in Options, Settings => Connection to pc ext .. but nothing changes. Htc sync is installed so the driver's present. I renitialiser the default settings, but nothing has changed .. no way that the pc detects the mobile phone, I also change the cable but can not find it either, so no way to root the wildfire s or to OI that is so. I installed a htcsync.apk but it will not work as well. Someone should there a solution?
Sorry it someone has already posted the same subject, I am not English I'm french so I understand not many
thank you
Salut,
Je suppose que tu a essayer d'autres ports USB. HTC Sync bug parfois et il suffit de brancher sur un autre port USB.
Ton PC est sous windows, mac ou autre? si windows sur quelle version de windows?
Oui j'ai deja tout essaye, j'ai desinstaller 3 fois htc sync, et reinstaller, j'ai changer a chaque fois pour essayer tout les port usb, j'ai meme changer de pc, mais rien n'y fait,
Je suis sur windows 7, mais j'ai aussi un pc sous linux, mais je ne parvient pas a detecter le gsm sur linux non plus
Par contre la seul fois que le pc detecte le wildfire, c'est quand je le mais sur fastboot usb, et que je le une ruu.exe il le detecte au debu de l'installation mais quand ensuite il reboot pour passer en bootloader, a ce moment la il ne le redetecte plus non plus.. c'est la seul fois ou j'ai pue avoir un connection pc => gsm
Guys, remember to post an english translation with your original message please.
ravijokhun said:
Salut,
Je suppose que tu a essayer d'autres ports USB. HTC Sync bug parfois et il suffit de brancher sur un autre port USB.
Ton PC est sous windows, mac ou autre? si windows sur quelle version de windows?
Click to expand...
Click to collapse
English Translation:
I suppose that you have tried other USB Ports. HTC Sync bugs sometimes and all you have to do is connect the phone to another USB Port
Is your PC running windows, mac or other? if Windows, can you please specify which version of windows your are running?
ricalomma said:
Oui j'ai deja tout essaye, j'ai desinstaller 3 fois htc sync, et reinstaller, j'ai changer a chaque fois pour essayer tout les port usb, j'ai meme changer de pc, mais rien n'y fait,
Je suis sur windows 7, mais j'ai aussi un pc sous linux, mais je ne parvient pas a detecter le gsm sur linux non plus
Par contre la seul fois que le pc detecte le wildfire, c'est quand je le mais sur fastboot usb, et que je le une ruu.exe il le detecte au debu de l'installation mais quand ensuite il reboot pour passer en bootloader, a ce moment la il ne le redetecte plus non plus.. c'est la seul fois ou j'ai pue avoir un connection pc => gsm
Click to expand...
Click to collapse
Yes I tried everything, I uninstalled 3 times htc sync and reinstall, I change every time to try all the USB ports, I even change the pc, but to no avail,
I'm on Windows 7, but I also have a Linux PC, but I can not detect the mobile phone either on linux
As against the only time the PC detects the wildfire is but when I fastboot usb, and I run the original ruu.exe. At firs it detects the installation but when it then reboot to switch to bootloader, at this moment he does not redetects more .. it's the only time I have a connection stinks pc => gsm
Sorry for my English, I'm French
no news?
tanks all
Sounds like a fault with your phone, may be worth taking it back to the shop for a replacement.
sent using tapatalk
hi
sorry for my bad english i don't speak english very well (i'am a french man)
laster tonight, i want to update my lenovo vibe p1 in android 6.0 official by lenovo with your guide tuto in your forum
but when i start the flash "download" i have a message "sahara fail" i click in "exit"
5 minute ago i conected my smartphone in my computeur with the official cable (i always use the micro usb cable with my phone) and when i to go to "peripherique gestional" (sorry for my bad english) i see that sorry i hawe a error when i posted a link .jpg my phone when it conected in my pc see "unknow usb"
i want to help please because my phone dont power on ??? my phone is definity bricked ??? because my phone is only one week and i buy in aliexpress
playgeek said:
hi
sorry for my bad english i don't speak english very well (i'am a french man)
laster tonight, i want to update my lenovo vibe p1 in android 6.0 official by lenovo with your guide tuto in your forum
but when i start the flash "download" i have a message "sahara fail" i click in "exit"
5 minute ago i conected my smartphone in my computeur with the official cable (i always use the micro usb cable with my phone) and when i to go to "peripherique gestional" (sorry for my bad english) i see that sorry i hawe a error when i posted a link .jpg my phone when it conected in my pc see "unknow usb"
i want to help please because my phone dont power on ??? my phone is definity bricked ??? because my phone is only one week and i buy in aliexpress
Click to expand...
Click to collapse
Hi.
Try this:
1. Go to device manager and see there, how your phone is recognized.
2. Uninstall and reinstall the drivers.
3. Re try the flashing procedure.
4. Tell us here what happened.
5. Good luck.
Send from my Lenovo P1 Vibe Pro with 3 Gb of RAM and 32 Gb of Internal Storage.
stympy said:
Hi.
Try this:
1. Go to device manager and see there, how your phone is recognized.
2. Uninstall and reinstall the drivers.
3. Re try the flashing procedure.
4. Tell us here what happened.
5. Good luck.
Send from my Lenovo P1 Vibe Pro with 3 Gb of RAM and 32 Gb of Internal Storage.
Click to expand...
Click to collapse
ok i try it and i posted here in 10 minute
hello i uninstall and reinstall the driver and qfil and Hello I just uninstall and reinstall the driver and nothing happens when I go in the device manager nothing happens while before i was showing peripherique iconnu and yet I took the drivers of the other topic I use google translation http://forum.xda-developers.com/vibe-p1/development/qpst-flashing-vibeui-3-1-s272-rom-t3386650
playgeek said:
hello i uninstall and reinstall the driver and qfil and Hello I just uninstall and reinstall the driver and nothing happens when I go in the device manager nothing happens while before i was showing peripherique iconnu and yet I took the drivers of the other topic I use google translation http://forum.xda-developers.com/vibe-p1/development/qpst-flashing-vibeui-3-1-s272-rom-t3386650
Click to expand...
Click to collapse
Hi.
Did you repeated the procedure?
When you looked in device manager, did you pluged the phone with the Volume + pressed?
What did you PC say?
hello
oui j'ai bien déinstaller et réinstaller mes drivers, j'ai bien conecter mon téléphone au pc en appoyant sur volume + avant de le brancher, oui j'ai bien utiliser le cable usb officiel du téléphone (j'ai essayer avec un autre et ca ne marche pas)
je veux bien mettre une capture d'ecran de l'erreur que j'ai mais a chaque fois que j'essaye d'en mettre un j'ai un message du forum comme quoi c'est interdit de mettre un lien
en gros le message après d'avoir brancher mon téléphone a mon pc et que je vais dans le gesitonaire de peripherique c'est "peripherique usb inconnu (echec de demandeur de descripteur de péripherique) etat : Erreur de pilote"
je fais quoi ? cr j'arrive plus a faire reconnaitre le téléphone via qfil ???
désole mais j'utilise google traduction j'suis francais
Yes i have to uninstall and reinstall my drivers, i have to connect my phone to the pc by using volume + before connecting it, yes I use the official USB cable of the phone (I try with another And it does not work)
I want to put a screenshot of the error I have but every time I try to put one I have a message from the forum that it is forbidden to put a link
Basically the message after having plugged my phone to my pc and i go into the peripheral gesitonaire it's "unknown usb device (peripheral descriptor request failed) state: driver error"
what do I do ? Cr i can not get to recognize the phone via qfil ???
Sorry but I use google translation j'suis francais
playgeek said:
hello
oui j'ai bien déinstaller et réinstaller mes drivers, j'ai bien conecter mon téléphone au pc en appoyant sur volume + avant de le brancher, oui j'ai bien utiliser le cable usb officiel du téléphone (j'ai essayer avec un autre et ca ne marche pas)
je veux bien mettre une capture d'ecran de l'erreur que j'ai mais a chaque fois que j'essaye d'en mettre un j'ai un message du forum comme quoi c'est interdit de mettre un lien
en gros le message après d'avoir brancher mon téléphone a mon pc et que je vais dans le gesitonaire de peripherique c'est "peripherique usb inconnu (echec de demandeur de descripteur de péripherique) etat : Erreur de pilote"
je fais quoi ? cr j'arrive plus a faire reconnaitre le téléphone via qfil ???
désole mais j'utilise google traduction j'suis francais
Yes i have to uninstall and reinstall my drivers, i have to connect my phone to the pc by using volume + before connecting it, yes I use the official USB cable of the phone (I try with another And it does not work)
I want to put a screenshot of the error I have but every time I try to put one I have a message from the forum that it is forbidden to put a link
Basically the message after having plugged my phone to my pc and i go into the peripheral gesitonaire it's "unknown usb device (peripheral descriptor request failed) state: driver error"
what do I do ? Cr i can not get to recognize the phone via qfil ???
Sorry but I use google translation j'suis francais
Click to expand...
Click to collapse
I just instaled the drivers on my " WARR LAPTOP"
I will atach 3 pictures and tell me if my pictures are the same on your PC.
I reinstall qfil but I have a question after unpacking the file qualcool driver 2.1 ... I find myself with two .cab file that 7-zip offers to unpack and I do not know what to do with it? And in the other folder I have two files qualcool_usb_driver and lenovo usb driver I install the driver lenovo usb driver but when I go into the other folder ave 4 under file checked free testcertificate and tools I do not know what in Do so even when doing right click> install with administrator rights nothing happens thank you in advance ???
And I'm sorry I still can not get a screenshot when I know how to do with noelskack I have a message telling me that I can not post link because I have less than 10 post Normal ca?
_______________________________________________
j'ai reinstaller qfil mais j'ai une question après d'avoir décompresser le dossier qualcool driver 2.1... je me retrouve avec deux fichier .cab que 7-zip me propose de décompresser et je ne sais pas quoi en faire ? et dans l'autre dossier j'ai deux dossier qualcool_usb_driver et lenovo usb driver j'ai installer le driver lenovo usb driver mais quand je me rend dans l'autre dossier ave 4 sous dossier checked free testcertificate et tools je ne sais pas quoi en faire car même en faisant clique droit > installer avec les droits administrateur il ne se passe rien merci d'avance ???
et désole je n'arrive toujours pas a poster de capture d'ecran alors que je sais comment faire avec noelskack j'ai un message me disant comme quoi je ne peux pas poster de lien car j'ai moins de 10 post c'est normal ca ?
playgeek said:
I reinstall qfil but I have a question after unpacking the file qualcool driver 2.1 ... I find myself with two .cab file that 7-zip offers to unpack and I do not know what to do with it? And in the other folder I have two files qualcool_usb_driver and lenovo usb driver I install the driver lenovo usb driver but when I go into the other folder ave 4 under file checked free testcertificate and tools I do not know what in Do so even when doing right click> install with administrator rights nothing happens thank you in advance ???
And I'm sorry I still can not get a screenshot when I know how to do with noelskack I have a message telling me that I can not post link because I have less than 10 post Normal ca?
_______________________________________________
j'ai reinstaller qfil mais j'ai une question apr�s d'avoir d�compresser le dossier qualcool driver 2.1... je me retrouve avec deux fichier .cab que 7-zip me propose de d�compresser et je ne sais pas quoi en faire ? et dans l'autre dossier j'ai deux dossier qualcool_usb_driver et lenovo usb driver j'ai installer le driver lenovo usb driver mais quand je me rend dans l'autre dossier ave 4 sous dossier checked free testcertificate et tools je ne sais pas quoi en faire car m�me en faisant clique droit > installer avec les droits administrateur il ne se passe rien merci d'avance ???
et d�sole je n'arrive toujours pas a poster de capture d'ecran alors que je sais comment faire avec noelskack j'ai un message me disant comme quoi je ne peux pas poster de lien car j'ai moins de 10 post c'est normal ca ?
Click to expand...
Click to collapse
I want to do one thing before do something:
1. disconect the phone from PC
2. press power button for 20 secconds and tell me what is going on!
3. The phone should start.
stympy said:
I want to do one thing before do something:
1. disconect the phone from PC
2. press power button for 20 secconds and tell me what is going on!
3. The phone should start.
Click to expand...
Click to collapse
hello my phone don't want to power on
playgeek said:
hello my phone don't want to power on
Click to expand...
Click to collapse
press volume up and until connect with the cable to pc
Don't use the USB cable you got with the phone it is garbage I had no end of problems with it and ended up using an old USB cable I had for a Huawei that worked a treat ,the driver I used is the Qualcomm_USB_Drivers.zip .
Hello i try what you told me and since the last time i had posted here i had more touch on my phone i try to connect it to my pc by pressing volume + and with a Other usb cable than the one provided with the phone but I do not know what happens but nothing happens when I plug it on my pc whereas it is more than two weeks that I no longer touch
And also I wanted to reinstall the qualcomm_usb_drivers.zip but when I unpack the zip I come across a .exe lenovo machin stuff but I fall into a folder with subfolder I do how already to install it on my pc?
Please thanks in advance
playgeek said:
Hello i try what you told me and since the last time i had posted here i had more touch on my phone i try to connect it to my pc by pressing volume + and with a Other usb cable than the one provided with the phone but I do not know what happens but nothing happens when I plug it on my pc whereas it is more than two weeks that I no longer touch
And also I wanted to reinstall the qualcomm_usb_drivers.zip but when I unpack the zip I come across a .exe lenovo machin stuff but I fall into a folder with subfolder I do how already to install it on my pc?
Please thanks in advance
Click to expand...
Click to collapse
Qualcomm_USBDriver_2.1.0.5.zip or Qualcomm_USB_Drivers.zip
Download the second one I couldn't find an exe in the first,the file is LenovoUsbDriver_autorun_1.0.16.exe