http://www.dopodasia.com/Dopod_Aus/members/others.aspx
838 Pro WM6 ROM code for Hutchison ‘3’ Network - version 3.54.707.4
838 Pro WM6 ROM code for Optus and Vodafone Network - version 3.53.707.2
Download and Update Instructions[FONT=?啁敦??]
[/FONT]
Published date: 2007/08/06
Big storage needed...
will anybody be so kind to make big storage version?
Binyo said:
http://www.dopodasia.com/Dopod_Aus/members/others.aspx
838 Pro WM6 ROM code for Hutchison ‘3’ Network - version 3.54.707.4
838 Pro WM6 ROM code for Optus and Vodafone Network - version 3.53.707.2
Download and Update Instructions[FONT=?啁敦??]
[/FONT]
Published date: 2007/08/06
Click to expand...
Click to collapse
Bet we don't see a JasJam Telstra tho'....
gomax said:
Bet we don't see a JasJam Telstra tho'....
Click to expand...
Click to collapse
Probably not, but the Optus and Vodafone code will work under Telstra Next-G
Network Setup Wizard gets all the MMS and Internet settings right first go aswell
I suspect we will never see a JasJam ROM as imate have dropped HTC as a supplier. I doubt they will got to the trouble of providing WM6 and Telstra won't do it on their own.
The original Dopod SEA WWE works great and also automatically sets up Telstra's settings. It also has the bonus of not being carrier branded and pleasingly less green than the HTC ROM.
Thanks a Million Guys.
I am sure I-mate will never have an update for JasJam especially with a WM-6 ROM.
ranova said:
Probably not, but the Optus and Vodafone code will work under Telstra Next-G
Network Setup Wizard gets all the MMS and Internet settings right first go aswell
Click to expand...
Click to collapse
So NextG is a definite go with this rom? Should I see an H in the menu or just 3G??
Greg
I just have the 3G icon to start off with, then it goes to H when i start up the data connection.
Only thing i had to do to get it going was set network type to WCDMA
ranova said:
Probably not, but the Optus and Vodafone code will work under Telstra Next-G
Network Setup Wizard gets all the MMS and Internet settings right first go aswell
Click to expand...
Click to collapse
http://www.imate.com/support/PPC_OP_Settings/Australia_Telstra.CAB
drgmt said:
Hi Guys.
Here is the way to get "everything telstra" working on your black dymond.
Step one
Install the attached telstra my place cab. Then proceed as follows....
Under connections select new connection.
Name it Telstra Internet
Click the modem tab. Click new.
Name the connection Telstra Internet
Select a Modem (GPRS, 3G)
access point name telstra.wap
Click finish
Set proxy to 10.1.1.181 port 80
HTTP should be 10.1.1.181:80
Then open telstra my place icon and navigate to foxtel. This should work.
Note to access non telstra sites you might need to disable proxy in my connections
Hope this works guys. pm if any trouble.
drgmt
Click to expand...
Click to collapse
http://www.4winmobile.com/forums/124404-post8.html
I flashed this ROM on my Telstra i-mate Jasjam (though I use Optus) . Works great! Network Wizard automatically set up all Optus settings. Now get 3G and HSPDA speeds and MMS settings all work! Thanks to all for sharing their insights and making our devices better than ever!
new official (really official) ROM!
AT&T just released their official WM6 ROM. I won't be able to load it until tomorrow. If anyone does, please post here if it's any better than the original "official" ROM.
http://www.america.htc.com/support/8525/software-downloads.html
Imate Telstra Rom Windows Mobile
Hi spoke to a support person about a week ago and he reconed a new rom was coming for Telstra customers for Mobile 6
Hi all
Sorry if this question might sound silly but i am new to this.
I have recentley aquired a imate jasjam:
ROM version; 1.31.305.2
ROM date; 09/08/06
Radio version; 1.20.31.10
Protocol version; 32.52.7020.00H
ExtROM version; 1.31.305.103
now this is set to telstra settings
I however have a three network and dont know the setting to set it to work with three network. when i rang 3 support they told me i need to get the dopod pro which works on their network.
I though the dopod pro and imate jasjam where the same phone but they tried to convince me it is different and advised me of not trying to put dopod software on jasjam as it might lock the phone.
So now i am totally confused
Do i update my imate with the WM-6 ROM from above link? if so how...
thnx in advance for any help
Official imate WM6
Here is a link to the official release of the imate WM6 release for the Jasjam: http://clubimate.com/jasjamsupport/JASJAMAU.html
You can then configure your settings for any operator after that. And you are right - the 838pro and jasjam are the same!
I would recommend flashing the Dopod rom or a Schaps rom. These have Network wizard which will setup all your settings. I am on 3 also and use Schaps rom. Works perfectly.
thnx a million guys
will look into both..
schaps looks good, first time flashing so i hope i dont brick the thing.
cheers
shaker22a said:
thnx a million guys
will look into both..
schaps looks good, first time flashing so i hope i dont brick the thing.
cheers
Click to expand...
Click to collapse
Follow the guides available and you won't go wrong.
It was daunting at 1st for me, but after you'v done it once it's easy!
There is a Telstra WM6 rom
I'm a bit confused by some of the comments above. There is a Telstra WM6 rom available on the Club iMate site. I had downloaded and installed it successfully but unfortunately it is not supported by BB Connect 4.0.0.9x so I went back to the Dopod Asia build.
Another update from 3Aus - 6 months old, but not listed anywhere?
Strangely, I can't see any mention in the forums of the 3Aus 838pro update available from 3... They mention version 1.30.707.8, which looks like it's supposed to be newer than the one mentioned above (which ends in .707.4)... It's been available for a while, and I don't know how it compares with some of the cooked ROMs available.
http://www.three.com.au/Dopod (Select 838pro from the dropdown, then "Planet 3 software upgrade" link, then another "Planet 3 software upgrade" link... Page contains download and install instructions, and some )
Direct link to download: http://203.210.124.136/3/software/Dopod_838_Pro_p3.exe
Supposedly, according to an sms I got maybe 6 months ago, this update is supposed to enable streaming content on Planet3. I haven't tried it yet, but will be doing so in the next few days. Has anyone else had a look at this? It's not listed in the wiki either, as far as I can see... (I'm about to try it out because of not being able to get Planet 3 streaming under WM6.1...)
Edit: Never mind, this is a WM5 update. We don't have it listed anywhere, though, so I'll add in some details about it...
ROM Version 1.30.707.8 Date 12/13/06
Radio: 1.27.30.10
Protocol: 32.60.7020.06H
SPL: 1.09
IPL: 1.01
It does have streaming under Planet 3 working, though. I'll try to figure out how it works.
Binyo said:
http://www.dopodasia.com/Dopod_Aus/members/others.aspx
838 Pro WM6 ROM code for Hutchison ‘3’ Network - version 3.54.707.4
838 Pro WM6 ROM code for Optus and Vodafone Network - version 3.53.707.2
Download and Update Instructions[FONT=?啁敦??]
[/FONT]
Published date: 2007/08/06
Big storage needed...
will anybody be so kind to make big storage version?
Click to expand...
Click to collapse
Hi there,
Total noob here. My dopod is running windows mobile 5 - will this rom upgrade my OS to version 6?
Thanks in advance
This link is not working, is there any other linkwhere i can download
838 Pro WM6 ROM code for Hutchison ‘3’ Network - version 3.54.707.4. Currently i have 3.54.707.3 Aus Hutchison - 3 Network ROM.
Can any one send me the link to download.
here is a new post cause the old post were to heavy
( link to the old post )
ok on the preview post some info was that it is possible to have the name display work with the name display ( here are a confirmation on the rogers site )
so it should be on the ext rom
does someone know how to extract it from it .. and does some one know if their is different version of the ext rom of rogers .. cause one version of the rogers is on the wiki
note: the rom from rogers is a WM5 ... that might be the problem ....
thanks
here are a explanation for the one who do not know what is it
Name Display is a new service that allows you to see the names of national landline callers as well as Rogers Wireless and FIDO callers, even if the person is not in your address book!
fido offer the same
fido is owned by rogers
Anyone that can extract the full registry from the original rogers tytn/hermes will be much appreciated as well.
nitrocell said:
Anyone that can extract the full registry from the original rogers tytn/hermes will be much appreciated as well.
Click to expand...
Click to collapse
Ok I hav ethe Tytn with original rom and the functionality working, how do I extract? Tell me and I will do it.
Can we reserect this thread?
i have wm6.1 .. it's shadow ce .. i love it .
today i called rogers and had the caller id activated . i was excited! but it doesn't work on my phone .
must be because i have shadow ce and not the standard rom .
what can i install to activate the caller id feature?
thanx in advance
it is not on the extended ROM apprently.
There is another thread where someone installed the Rogers WM5 ROM and reset before the extended ROM was installed and Name Display still worked.
on another thread people have pledged money, but no go.
jinner said:
it is not on the extended ROM apprently.
There is another thread where someone installed the Rogers WM5 ROM and reset before the extended ROM was installed and Name Display still worked.
on another thread people have pledged money, but no go.
Click to expand...
Click to collapse
you know what... the rogers Tytn(hermes) comes with wm5 .. but the rogers Touch comes with windows wm6 .. and name display works .
so can we install the wm6 from the rogers touch onto our hermes?
i'm on a kaiser now . but still interested in getting caller id to work .. so just to test, i put back the Rogers WM5 standard rom on my hermes.
I tested with two roms:
- Rogers ELF RUUUpdater-V2
- Rogers WM5 RUUUpdater-V2
Even though i have Name Display activated through rogers, i was not able to resurrect it's functionality by flashing to original roms .
this causes me to beleive the support for this feature is in the radio shipped with rogers.
Well, you are absolutely right aliencurv....it is in the radio.
I can't believe how many threads on the subject that are not concluded. (Maybe some people know the answer but just didn't post it)
I guess the problems is us, Canadians.
Anyhow, I managed to work rogers name display on my Hermes. I had been using CRCs 13.1 (absolutely great ROM, thanks a million). I found and downloaded original Rogers ROM (from ROMbaker) and flashed the Hermes. Name Display (CNAP) didn't work.
Then by accident I found this radio:
http://forum.xda-developers.com/showthread.php?t=323957
Updated the radio and I am in business. Name Display works.
I posted this because
1-I wanted to help fellow Canadians
2-I am hoping to get help from experienced members to make this work on WM6.1
Impatience....
Here is what I did while waiting a response.
First I downloaded ROMDonalds kitchen tools
Unpacked CRCs 13.1 and Rogers original rom.
Copied ril.dll and rilgsm.dll FOLDERS from the rogers dump folder to CRCs dump, repacked the rom and flashed my hermes. Phone turned on and connected to the computer but screen was pure white. Nothing was visible.
Then I copied only rilgsm.dll FILE and packed the rom. Phone turned on normal but no name display.
Then I copied ril.dll file. Same as above.
In each case I also created the registry settings under HKLM/.../RIL that exist in Rogers ROM but not in CRCs.
This is what I could do as a rookie. Any experienced person's help would be highly appreciated.
Hi guys..
Ive tried numerous schaps ROMS and cannot for the life of me get FOXTEL working on the Telstra network. Ive installed all the Telstra Cabs inc my places etc but no luck.
It seems as if the IE link does not recognize a 3G portal...
Any help would be appreciated as i cant stand this official Telstra ROM.
Jason
Surely someone must be able to help..... anyone?
Hmmm, thats weird as I have run Schaps 4.22 and got it working fine with the Telstra CAB files. I take you have a version of Schaps with Streaming media? Also what Telstra CAB files are you using? WM6 ones or the old WM5 ones? Do a search here on for Telstra ROM as someone has all the CABS for the new WM6 rom update. From memory I just ran two cab files, Telstra V5.5 & theDefault WM6DST2007-2 and it worked a treat.
Dev
Isnt that the cab for daylight savings??
I installed the No_Video_Uninstall.cab, Telstra V5.5.cab and the My_Places.cab. Still wont work even with streaming media and telstra proxy activated. For some reason it wont recognize the Telstra 3G portal and i think that has something to do with it.
Jas
I was using my stock universal (T-Mobile MDA II) with GPRS connection. I upgraded the ROM to Ranju's V7.6 WM6.1 ROM and in general I think it's a great improvement except now my GPRS connection doesn't work. I have tried Shap's Setup Operator but it doesn't have an option for the US. I think I either need to upgrade my radio ROM, or I need a CAB to tell the universal how to use the GPRS in the US. Can somebody please give me some tips to get it working again?
Posterbation
Just to update folks, I was about to go back to the stock ROM but I stumbled accross the DarkForcesTeam ROM and gave it a whirl. GPRS in the US on T-Mobile works just fine with that ROM. I actually like it better because it has less software installed so I can install my own, and it has a really nice custom Today screen.
James
I have the same problem of no GPRS with Ranju in the UK on vodafone.
does ayone know if there is any? I tried downloading whosdamans version but my internet wont work and I get an error. How do I fix this, I am stuck with a rom that does not allow me to use the internet
im guessing you need to get the dcd carrier customizations just do a search.
can someone find me a dcd carrier customizations and explain to me how to install. Im a newb, sorrry.
put the whosdaman rom back on and istall your carrier after it loads
http://dcd1182.n715dp.com/index.php?dir=carriers/
I downloaded the one for bell under that link and installed the cab on my pone but on the home screen it still says sprint and the internet does not work
http://www.nfsfandev.tk
check out NFSFAN BELL rom 1.19 v2 (v3 is coming out soon)
Anyhow hands down one of best rom releases...