Can someone please help, i would like to make a shortcut to "ALL Settings", so instead of having the the shortcut direct me to the Manila Settings, i would like to go directily to all settings, just like it does when Sense is turned off.
daguila said:
Can someone please help, i would like to make a shortcut to "ALL Settings", so instead of having the the shortcut direct me to the Manila Settings, i would like to go directily to all settings, just like it does when Sense is turned off.
Click to expand...
Click to collapse
I assume you're running some version of winmo 6.5? THIS thread has details on how to create shortcuts to the WM settings instead of the manila ones.
sirphunkee said:
I assume you're running some version of winmo 6.5? THIS thread has details on how to create shortcuts to the WM settings instead of the manila ones.
Click to expand...
Click to collapse
Thanks so mcuh. i had been looking for this for a while
done
HKLM\Software\HTC\Manila\ProgramLauncher\3 (Button4)
REG_SZ> Command >> --switchtopage Manila://settings.page
REG_SZ> DispName >> [[IDS_SETTINGSTITLE]]
REG_SZ> IconPath >> \windows\HTC\Assets\Images\programlauncher\Program_icon\settings_88.qtc
REG_DWORD> IsReadOnly >> 1
REG_SZ> Path >> \Windows\manila.exe
Added a big list of disable/enable android.permissions
Cleaned up Op.
Made information more concise and easier on the eyes.
read_ahead_kb:
Code:
#
for i in /sys/devices/virtual/bdi/*/read_ahead_kb
do
echo "(AnyMultipleOf 128)" > $i
done
inode_readahead_blks
Code:
#
for i in /sys/fs/ext4/*/inode_*
do
echo "VAR" > $i
done
You won't find more simple scripting SETTING=VALUE...
Code:
write='busybox sysctl -w /sys/devices/system/cpu'
i=$write/cpufreq/conservative
j=$write/cpu0/cpufreq
$j/scaling_governor=conservative
$j/scaling_max_freq=1200000
$jscaling_min_freq=25000
$i/sampling_rate=25000
$i/up_threshold=40
$i/down_threshold=50
$i/freq_step=5
$i/sampling_down_factor=2
|
Code:
\( An Ondemand example \)
write='busybox sysctl -w /sys/devices/cpu'
i=$write/cpufreq/ondemand
j=$write/cpu0/cpufreq
$j/scaling_governor=ondemand
$j/scaling_min_freq=25000
$j/scaling_max_freq=1400000
$i/sampling_rate=50000
$i/up_threshold=65
$i/powersave_bias=10
$i/sampling_down_factor=3
$i/down_differential=30
$i/freq_step=65
|
Code:
\( Pegasus example \)
write='busybox sysctl -w /sys/devices/system/cpu'
i=$write/cpufreq/pegasusq
j=$write/cpu0/cpufreq
$j/scaling_governor=pegasusq
$j/scaling_min_freq=25000
$j/scaling_max_freq=1400000
$i/pegasusq/up_threshold=80
$i/pegasusq/up_threshold_at_min_freq=65
$i/pegasusq/sampling_down_factor=5
$i/pegasusq/down_differential=5
$i/pegasusq/freq_step=60
$i/freq_for_responsiveness=500000
$i/pegasusq/cpu_up_rate=10
$i/pegasusq/cpu_down_rate=20
$i/pegasusq/hotplug_freq_1_1=500000
$i/pegasusq/hotplug_freq_2_0=200000
$i/pegasusq/hotplug_rq_1_1=300
$i/pegasusq/hotplug_rq_2_0=350
$i/pegasusq/ignore_nice_load=0
$i/pegasusq/io_is_busy=1
$i/pegasusq/max_cpu_lock=0
$i/pegasusq/hotplug_lock=0
|
|
simple shell for speed and memory management
Code:
\( You can virtually write any setting \)\
ext4=`busybox sysctl -w /sys/fs/ext4/mmcblk0`
lmk=`busybox sysctl -w /sys/module/lowmemorykiller/parameters`
$ext4\p10/inode_readahead_blks=128
$ext4\p9/inode_readahead_blks=128
$ext4\p7/inode_readahead_blks=256
$ext4\p12/inode_readahead_blks=64
$ext4\p10/inode_goal=16
$ext4\p9/inode_goal=16
$ext4\p7/inode_goal=16
$ext4\p12/inode_goal=16
busybox sysctl -w /proc/1/oom_adj=-17
$lmk/adj=0,2,-4,8,12,15
$lmk/minfree=1024,3072,5120,12288,17408,24566
Screen state script that turns on and off both cpus
For now, this Post will be home to I/O tweaks
Queue settings unknown to most that
Code:
for i in /sys/block/*/*/force*
do
echo "0" > $i
echo 0 > /sys/block/mmcblk0/mmcblk0p1/ro
echo 0 > /sys/block/mmcblk0/mmcblk0p10/ro
echo 0 > /sys/block/mmcblk0/mmcblk0p11/ro
echo 0 > /sys/block/mmcblk0/mmcblk0p12/ro
echo 0 > /sys/block/mmcblk0/mmcblk0p2/ro
echo 0 > /sys/block/mmcblk0/mmcblk0p3/ro
echo 0 > /sys/block/mmcblk0/mmcblk0p4/ro
echo 0 > /sys/block/mmcblk0/mmcblk0p5/ro
echo 0 > /sys/block/mmcblk0/mmcblk0p6/ro
echo 0 > /sys/block/mmcblk0/mmcblk0p7/ro
echo 0 > /sys/block/mmcblk0/mmcblk0p8/ro
echo 0 > /sys/block/mmcblk0/mmcblk0p9/ro
Now you`re ready to adjust stuff...
Code:
for i in /sys/devices/virtual/block/*/queue
do
echo "sio" > $i/scheduler
echo "4096" > $i/minimum_io_size
echo "1" > $i/add_random
echo "4096" > $i/discard_granularity
echo "1" > /discard_zeroes_data
echo "1" > $i/discard_max_bytes
echo "1024" > $i/optimal_io_size
done
|or
for i in /sys/devices/virtual/block/*/queue
do
echo "deadline" > $i/scheduler
echo "2048" > $i/minimum_io_size
echo "1" > $i/add_random
echo "0" > $i/discard_max_bytes
echo "0" > $i/discard_granularity
echo "1" > /discard_zeroes_data
echo "128" > $i/optimal_io_size
done
I have so many variations and these ftmp dont have parameters so Ill let you get creative on those.
Sys Call
Valid keys for /etc/sysctl.conf
I meant for this list to be the OP.. but alas.. i was 11000 or so character to heavy.. lol
A gift ( not all sysctl calls are adjustable and this list is raw. there will be one or two no goes ..)
( wow, I hadn't realized there was near 800 settings in here.... )
ICS SYSCALL MASTER KEY
Alright, I know that most of you will already know how to use a sysctl.conf, but there are probably a couple
things that you didn't know about sysctl, so I may as well start with the obvious...
Code:
\\the following is the easiest way to use sysctl.conf, it is ideally done at init but is equally as easy to use from termemu\\
#/system/bin/sh \\ for init.d \\
sysctl -p \\ from terminal emulator you would have first signed it as usr \\
Now for one you may not now
I'm sure you've seen it used on each command.. (something like 'busybox sysctl -e -w vm.ridin_dirty=example)
*note in sysctl, -(e) is to skip displaying key (e)rrors and keep reading; -n is umber errors i believe; -w is (w)rite; the -p above is (p)rint sysclt.conf
Code:
\\ this is a nice little trick, there are over around 30 kb of keys,,what to do?? \\
su \\ or #/system/bin/sh if in a script \\
sysctl -p /etc/where/ever/your/2nd/sysctl/is
sysctl -p /or/your/5th
sysctl -p $0 <\\ or call your working script itself.\\>
<\\next is the command to create master list from your own device\\>
[B]sysctl -A > /data/log/MasterSysctl.txt[/B]
<\\and this next one,,, well this next is just priceless.. how's this for difficult syntax\\>
sysctl -w /proc/1/oom_adj=-17 <\\yes,, I mean..it...\\>
sysctl -w /sys/devices/virtual/block/loop1/queue/scheduler=easiest_way_to_apply_any_setting_you_arent_sure_of
Some working examples coming soon.
CpuFreq slash Governor settings
Similar but more refined and for a PEGASUS SETUP
Customize it all...
This is an advanced example made simple.. This one will set (between 6) governor and its settings, max and min freq, readahead kb in all of BDI, and inode readahead blks in each mmcblk.
And its 2.2* kb. And you only need to edit the subs if you wamt...
{no mem management or screenstate, but I just had a 4.5 hour screen on cycle at 1.4 max and scoring 4600+ on quadrants...}
Code:
#!/system/bin/sh
chmod 0644 /sys/block/*/queue/*
mount -o remount,rw / /
mount -o remount.rw /system /system
governor=pegasusq
max_freq=1400000
min_freq=50000
inode_readahead=128
read_ahead_kb=3840
cpu=/sys/devices/system/cpu/cpu0/cpufreq
echo "$min_freq" > $cpu/scaling_min_freq
echo "$max_freq" > $cpu/scaling_max_freq
for i in /sys/block/*/*/force_ro
do
echo "0" > $i
done
for i in /sys/class/bdi/*/read*
do
echo "$read_ahead_kb" > $i
done
for i in /sys/fs/ext4/*/inode_*
do
echo "$inode_readahead" > $i
done
for i in $cpu/scaling_governor
do
echo "$governor" > $i
done
for i in /sys/devices/system/cpu/cpufreq
do
active=`cat $cpu/scaling_governor`
Begin_ondemand
echo "40000" > $i/ondemand/sampling_rate
echo "70" > $i/ondemand/up_threshold
echo "15" > $i/ondemand/powersave_bias
echo "70" > $i/ondemand/freq_step
echo "3" > $i/ondemand/sampling_down_factor
Begin_smartassv2
echo "800000" > $i/smartass/awake_ideal_freq
echo "200000" > $i/smartass/sleep_ideal_freq
echo "800000" > $i/smartass/sleep_wakeup_freq
echo "75" > $i/smartass/max_cpu_load
echo "45" > $i/smartass/min_cpu_load
echo "0" > $i/smartass/ramp_up_step
echo "0" > $i/smartass/ramp_down_step
echo "24000" > $i/smartass/up_rate_us
echo "99000" > $i/smartass/down_rate_us
Begin_interactive
echo "80" > $i/interactive/go_hispeed_load
echo "40000" > $i/interactive/min_sample_time
echo "20000" > $i/interactive/timer_rate
#Begin_pegasusq
echo "80" > $i/pegasusq/up_threshold
echo "65" > $i/pegasusq/up_threshold_at_min_freq
echo "5" > $i/pegasusq/sampling_down_factor
echo "5" > $i/pegasusq/down_differential
echo "60" > $i/pegasusq/freq_step
echo "400000" > $i/freq_for_responsiveness
echo "10" > $i/pegasusq/cpu_up_rate
echo "20" > $i/pegasusq/cpu_down_rate
echo "400000" > $i/pegasusq/hotplug_freq_1_1
echo "300000" > $i/pegasusq/hotplug_freq_2_0
echo "300" > $i/pegasusq/hotplug_rq_1_1
echo "350" > $i/pegasusq/hotplug_rq_2_0
echo "0" > $i/pegasusq/ignore_nice_load
echo "1" > $i/pegasusq/io_is_busy
echo "0" > $i/pegasusq/max_cpu_lock
echo "0" > $i/pegasusq/hotplug_lock
#Begin_lulzactive
echo "60" > $i/lulzactive/inc_cpu_load
echo "4" > $i/lulzactive/pump_up_step
echo "1" > $i/lulzactive/pump_down_step
echo "10000" > $i/lulzactive/up_sample_time
echo "70000" > $i/lulzactive/down_sample_time
echo "5" > $i/lulzactive/screen_off_min_step
#Begin_conservative
echo "55" > $i/conservative/up_threshold
echo "25000" > $i/conservative/sampling_rate
echo "3" > $i/conservative/sampling_down_factor
echo "40" > $i/conservative/down_threshold
echo "5" > $i/conservative/freq_step
done
exit 0
Odex all data apps
http://forum.xda-developers.com/showthread.php?p=32305612
Here's a link to a post with a Flashable busybox (with extra-goodies)
PhAkEer said:
a place where one can come to copy/plaste sections
Click to expand...
Click to collapse
I know how to copy, but what is this plaste you speak of?
anyways, this looks promising for adding some more scripts in one spot for all.
Sent from my SPH-D710 using Tapatalk
Click here for custom mods for your E4GT
Prove it
PhAkEer said:
Prove it
Click to expand...
Click to collapse
Edited in a quote before you edited :screwy: haha
Sent from my SPH-D710 using Tapatalk
Click here for custom mods for your E4GT
What is a script? And what do all those fancy thingy things you posted do? Oh, and I spilled grape juice all over my phone. Its still dripping out of it. Why do you think it won't turn on? Also, can you come help me pick my nose?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How did this thread sneak in on me bro? A little sly-of-hand action there huh.... hook 'em in placebo and create another thread... then mention nonchalantly in placebo thread to check your other thread for the latest.Lol
Looking forward to seeing where this one leads.. nice work man!
Sent from my SPH-D710 using Xparent Blue Tapatalk 2
blackcanopy said:
How did this thread sneak in on me bro? A little sly-of-hand action there huh.... hook 'em in placebo and create another thread... then mention nonchalantly in placebo thread to check your other thread for the latest.Lol
Looking forward to seeing where this one leads.. nice work man!
Sent from my SPH-D710 using Xparent Blue Tapatalk 2
Click to expand...
Click to collapse
Come one now, brah. You know exactly where this goes....
(this leads to me being in your backpack after a while.. and...
to my ultimate goal.... I sleep.. for at least 6 hours at once...)
Anybody want a script to odex data/apps??
Wrote it this morning.
Just need dexopt-wrapper and then execute this.. no reboot, apps keep their classes.dex for the future as well...
Code:
#!/system/bin/sh
J=/system/framework
A=/data/app
W=/system/xbin/dexopt-wrapper
mount -o remount,rw /system /system
mount -o remount,rw /data /data
rm -f $A/*.odex
for i in $A/*
do
name=`basename $i .apk`
$W $A/$name.apk $A/$name.odex $J/core.jar:$J/core-junit.jar:$J/bouncycastle.jar:$J/ext.jar:$J/framework.jar:$J/framework2.jar:$J/android.policy.jar:$J/services.jar:$J/apache-xml.jar
chmod 0644 $A/$name.odex
done
echo $i
sleep 2
exit 0
( and telling me if this stuff does or does not work is NOT off topic ftr )
Haven't even had time to look at this to see what it does...
Found it in an unnamed folder in a backup..
If anybodies knows who's work this is please say so..
I'm only posting it to get it off of my work pc.. I'll look into it later.
Code:
#!/system/bin/sh
#
#
readdebug() {
DUAL_CORE_DEBUG=`cat /system/etc/dual_core/debug`
DUAL_CORE_DEBUG=${DUAL_CORE_DEBUG:=0}
}
log() {
if [ "$DUAL_CORE_DEBUG" = "1" ] ; then
echo "$(date): [email protected]" >> /devlog/dual_core
fi
}
logcpu() {
if [ "$DUAL_CORE_DEBUG" = "1" ] ; then
local NOW_FREQ=`cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq`
local NOW=`cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq`
log "CPU[0]: scaling_max_freq=$NOW"
local NOW_ONLINE=`cat /sys/devices/system/cpu/cpu1/online`
log "CPU[1]: online=$NOW_ONLINE"
if [ -f /sys/devices/system/cpu/cpu1/cpufreq/scaling_max_freq ] ; then
local NOW=`cat /sys/devices/system/cpu/cpu1/cpufreq/scaling_max_freq`
log "CPU[1]: scaling_max_freq=$NOW"
fi
fi
}
init_dc_fs() {
sysrw
touch /devlog/dual_core ; chmod 777 /devlog/dual_core
touch /system/etc/dual_core/debug ; chmod 777 /system/etc/dual_core/debug
touch /system/etc/dual_core/sleep_frequency ; chmod 777 /system/etc/dual_core/sleep_frequency
touch /system/etc/dual_core/disable_sleep_freq ; chmod 777 /system/etc/dual_core/disable_sleep_freq
sysro
}
waitforwakeup() {
log "waitforwakeup{" ; logcpu
AWAKE=`cat /sys/power/wait_for_fb_wake`
if [ "$AWAKE" = "awake" ] ; then
CPU0_FREQ_AWAKE=${CPU0_FREQ_AWAKE:="$CPU0_FREQ_BOOT"}
log "Awake triggered... old awake is: $CPU0_FREQ_AWAKE"
log "CPU[1] try set online"
chmod 644 /sys/devices/system/cpu/cpu1/online
echo "1" > /sys/devices/system/cpu/cpu1/online
chmod 444 /sys/devices/system/cpu/cpu1/online
log "CPU[1] online"
if [ "$DISABLE_SLEEP" = "1" ] || [ "$OC_DAEMON" = "1" ] ; then
log "sleep cpu0 frequency mod disabled"
else
log "waking up from earlier sleep.. set to old awake frequency = $CPU0_FREQ_AWAKE"
echo "$CPU0_FREQ_AWAKE" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
fi
sleep 1
echo "$CPU0_FREQ_AWAKE" > /sys/devices/system/cpu/cpu1/cpufreq/scaling_max_freq
chmod 644 /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor
echo "ondemand" > /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor
chmod 444 /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor
log "}wakeup" ; logcpu
fi
}
waitforsleep() {
log "waitforsleep{" ; logcpu
SLEEPING=`cat /sys/power/wait_for_fb_sleep`
if [ "$SLEEPING" = "sleeping" ] ; then
log "Sleep triggered..."
sleep_cpu0
log "CPU[1]: try set offline"
chmod 644 /sys/devices/system/cpu/cpu1/online
echo "0" > /sys/devices/system/cpu/cpu1/online
chmod 444 /sys/devices/system/cpu/cpu1/online
log "CPU[1]: offline"
fi
log "}waitforsleep" ; logcpu
}
sleep_cpu0() {
CPU0_FREQ_AWAKE=`cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq`
log "Sleeping, remember awake frequency: $CPU0_FREQ_AWAKE"
DISABLE_SLEEP=`cat /system/etc/dual_core/disable_sleep_freq`
if [ "$DISABLE_SLEEP" = "1" ] || [ "$OC_DAEMON" = "1" ] ; then
log "DISABLE_SLEEP=1 or OCD detected"
else
if [ -e /system/etc/dual_core/sleep_frequency ] ; then
SLEEP_FREQUENCY=`cat /system/etc/dual_core/sleep_frequency`
log "sleep_frequency setting found, using $SLEEP_FREQUENCY instead of $CPU0_FREQ_AWAKE"
fi
SLEEP_FREQUENCY=${SLEEP_FREQUENCY:=DEFAULT_SLEEP_FREQUENCY}
echo "$SLEEP_FREQUENCY" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
log "Set cpu0 frequency to $SLEEP_FREQUENCY"
fi
}
DEFAULT_SLEEP_FREQUENCY=192000
init_dc_fs
DUAL_CORE_DEBUG="1"
log "Starting..."; logcpu
if [ -f /system/etc/virtuous_oc/wake_max_freq ] ; then
OC_DAEMON=1
log "OC Daemon found."
fi
DISABLE_SLEEP=`cat /system/etc/dual_core/disable_sleep_freq`
CPU0_FREQ_BOOT=`cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq`
STATE=`cat /sys/power/state_onchg`
if [ "$STATE" = "chgoff" ] ; then
log "device is asleep, scaling down"
sleep_cpu0
fi
DUAL_CORE_DEBUG="0"
(while : ; do
waitforwakeup
readdebug
waitforsleep
readdebug
done &)
at a glance it looks like an extremely over complicated screenstate script....
PhAkEer said:
Haven't even had time to look at this to see what it does...
Found it in an unnamed folder in a backup..
If anybodies knows who's work this is please say so..
I'm only posting it to get it off of my work pc.. I'll look into it later.
Code:
#!/system/bin/sh
#
#
readdebug() {
DUAL_CORE_DEBUG=`cat /system/etc/dual_core/debug`
DUAL_CORE_DEBUG=${DUAL_CORE_DEBUG:=0}
}
log() {
if [ "$DUAL_CORE_DEBUG" = "1" ] ; then
echo "$(date): [email protected]" >> /devlog/dual_core
fi
}
logcpu() {
if [ "$DUAL_CORE_DEBUG" = "1" ] ; then
local NOW_FREQ=`cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq`
local NOW=`cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq`
log "CPU[0]: scaling_max_freq=$NOW"
local NOW_ONLINE=`cat /sys/devices/system/cpu/cpu1/online`
log "CPU[1]: online=$NOW_ONLINE"
if [ -f /sys/devices/system/cpu/cpu1/cpufreq/scaling_max_freq ] ; then
local NOW=`cat /sys/devices/system/cpu/cpu1/cpufreq/scaling_max_freq`
log "CPU[1]: scaling_max_freq=$NOW"
fi
fi
}
init_dc_fs() {
sysrw
touch /devlog/dual_core ; chmod 777 /devlog/dual_core
touch /system/etc/dual_core/debug ; chmod 777 /system/etc/dual_core/debug
touch /system/etc/dual_core/sleep_frequency ; chmod 777 /system/etc/dual_core/sleep_frequency
touch /system/etc/dual_core/disable_sleep_freq ; chmod 777 /system/etc/dual_core/disable_sleep_freq
sysro
}
waitforwakeup() {
log "waitforwakeup{" ; logcpu
AWAKE=`cat /sys/power/wait_for_fb_wake`
if [ "$AWAKE" = "awake" ] ; then
CPU0_FREQ_AWAKE=${CPU0_FREQ_AWAKE:="$CPU0_FREQ_BOOT"}
log "Awake triggered... old awake is: $CPU0_FREQ_AWAKE"
log "CPU[1] try set online"
chmod 644 /sys/devices/system/cpu/cpu1/online
echo "1" > /sys/devices/system/cpu/cpu1/online
chmod 444 /sys/devices/system/cpu/cpu1/online
log "CPU[1] online"
if [ "$DISABLE_SLEEP" = "1" ] || [ "$OC_DAEMON" = "1" ] ; then
log "sleep cpu0 frequency mod disabled"
else
log "waking up from earlier sleep.. set to old awake frequency = $CPU0_FREQ_AWAKE"
echo "$CPU0_FREQ_AWAKE" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
fi
sleep 1
echo "$CPU0_FREQ_AWAKE" > /sys/devices/system/cpu/cpu1/cpufreq/scaling_max_freq
chmod 644 /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor
echo "ondemand" > /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor
chmod 444 /sys/devices/system/cpu/cpu1/cpufreq/scaling_governor
log "}wakeup" ; logcpu
fi
}
waitforsleep() {
log "waitforsleep{" ; logcpu
SLEEPING=`cat /sys/power/wait_for_fb_sleep`
if [ "$SLEEPING" = "sleeping" ] ; then
log "Sleep triggered..."
sleep_cpu0
log "CPU[1]: try set offline"
chmod 644 /sys/devices/system/cpu/cpu1/online
echo "0" > /sys/devices/system/cpu/cpu1/online
chmod 444 /sys/devices/system/cpu/cpu1/online
log "CPU[1]: offline"
fi
log "}waitforsleep" ; logcpu
}
sleep_cpu0() {
CPU0_FREQ_AWAKE=`cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq`
log "Sleeping, remember awake frequency: $CPU0_FREQ_AWAKE"
DISABLE_SLEEP=`cat /system/etc/dual_core/disable_sleep_freq`
if [ "$DISABLE_SLEEP" = "1" ] || [ "$OC_DAEMON" = "1" ] ; then
log "DISABLE_SLEEP=1 or OCD detected"
else
if [ -e /system/etc/dual_core/sleep_frequency ] ; then
SLEEP_FREQUENCY=`cat /system/etc/dual_core/sleep_frequency`
log "sleep_frequency setting found, using $SLEEP_FREQUENCY instead of $CPU0_FREQ_AWAKE"
fi
SLEEP_FREQUENCY=${SLEEP_FREQUENCY:=DEFAULT_SLEEP_FREQUENCY}
echo "$SLEEP_FREQUENCY" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq
log "Set cpu0 frequency to $SLEEP_FREQUENCY"
fi
}
DEFAULT_SLEEP_FREQUENCY=192000
init_dc_fs
DUAL_CORE_DEBUG="1"
log "Starting..."; logcpu
if [ -f /system/etc/virtuous_oc/wake_max_freq ] ; then
OC_DAEMON=1
log "OC Daemon found."
fi
DISABLE_SLEEP=`cat /system/etc/dual_core/disable_sleep_freq`
CPU0_FREQ_BOOT=`cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq`
STATE=`cat /sys/power/state_onchg`
if [ "$STATE" = "chgoff" ] ; then
log "device is asleep, scaling down"
sleep_cpu0
fi
DUAL_CORE_DEBUG="0"
(while : ; do
waitforwakeup
readdebug
waitforsleep
readdebug
done &)
at a glance it looks like an extremely over complicated screenstate script....
Click to expand...
Click to collapse
You might be right! It kinda looks like the script from the CPU sleep thread from here http://forum.xda-developers.com/showthread.php?t=1739457
Sent from my SPH-D710 using Tapatalk 2
Customizable Pegasus.
As is I'm getting something I'd recognize as a score in quad on jb... I thought the day would never come....
Code:
#!/system/bin/sh
# SETUP FOR PEGASUS
# I/O Settings
scheduler=deadline
read_ahead=3072
inode_blks=64
inode_goal=8
# CPU Freq Settings
min_freq=200
max_freq=1200
up_thresh=80
sampling=40000
sampling_factor=3
down_diff=5
freq_step=60
response_freq=500000
up_rate=20
down_rate=30
freq_1_1=400000
freq_2_0=300000
rq_1_1=400
rq_2_0=350
ignore_nice=0
io_is_busy=0
cpu_lock=0
lockR=0
# Stream settings
max_mb_scan=0
min_mb_scan=0
mb_stream_req=0
max_writeback_bump=32
req_order2=0
prealloc_mb=768
# Here we go again...lol
set -x
exec > /data/log/Pegasus.log 2>&1
/system/bin/sh
for j in $(/system/xbin/busybox mount | /system/xbin/busybox grep ext4 | /system/xbin/busybox cut -d " " -f3)
do
sync
/system/xbin/busybox mount -o remount,noatime,barrier=0,commit=5 $j
done
mount -o remount,noatime,nobh,nodiratime,nodelalloc,noauto_da_alloc,barrier=0 /system /system
mount -o remount,noatime,nobh,nodiratime,nodelalloc,noauto_da_alloc,barrier=0,commit=0 /cache /cache
mount -o remount,noatime,nodiratime,delalloc,noauto_da_alloc,barrier=0,commit=0 /data /data
for i in /sys/fs/ext4/*
do
echo "$max_mb_scan" > $i/mb_max_to_scan
echo "$min_mb_scan" > $i/mb_min_to_scan
echo "$inode_blks" > $i/inode_readahead_blks
echo "$inode_goal" > $i/inode_goal
echo "$mb_stream_req" > $i/mb_stream_req
echo "$max_writeback_bump" > $i/max_writeback_mb_bump
echo "$preaoc_mb" > $i/mb_group_prealloc
echo "$req_order2" > $i/mb_order2_req
done
echo "pegasusq" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
for i in /sys/devices/system/cpu/cpufreq/pegasusq
do
echo "$up_thresh" > $i/up_threshold
echo "$sampling" > $i/sampling_rate
echo "$sampling_factor" > $i/sampling_down_factor
echo "$down_diff" > $i/down_differential
echo "$freq_step" > $i/freq_step
echo "$up_rate" > $i/cpu_up_rate
echo "$down_rate" > $i/cpu_down_rate
echo "$freq_1_1" > $i/hotplug_freq_1_1
echo "$freq_2_0" > $i/hotplug_freq_2_0
echo "$rq_1_1" > $i/hotplug_rq_1_1
echo "$rq_2_0" > $i/hotplug_rq_2_0
echo "$ignore_nice" > $i/ignore_nice_load
echo "$io_is_busy" > $i/io_is_busy
echo "$cpu_lock" > $i/max_cpu_lock
done
for i in /sys/devices/virtual/bdi/*/read_ahead_kb
do
echo "$read_ahead" > $i
done
for i in /sys/class/block/*/queue
do
echo "$scheduler" > $i/scheduler
echo "$read_ahead" > $i/read_ahead_kb
done
case "$min_freq" in
*)
i=/sys/devices/system/cpu/cpu0/cpufreq
;;
25)
echo "25000" > $i/scaling_min_freq
;;
50)
echo "50000" > $i/scaling_min_freq
;;
100)
echo "100000" > $i/scaling_min_freq
;;
200)
echo "200000" > $i/scaling_min_freq
;;
300)
echo "300000" > $i/scaling_min_freq
;;
400)
echo "400000" > $i/scaling_min_freq
;;
500)
echo "500000" > $i/scaling_min_freq
;;
esac;
case "$max_freq" in
800)
echo "800000" > $cpu/scaling_max_freq
;;
900)
echo "900000" > $cpu/scaling_max_freq
;;
1000)
echo "1000000" > $cpu/scaling_max_freq
;;
1100)
echo "1100000" > $cpu/scaling_max_freq
;;
1200)
echo "1200000" > $cpu/scaling_max_freq
;;
1300)
echo "1300000" > $cpu/scaling_max_freq
;;
1400)
echo "1400000" > $cpu/scaling_max_freq
;;
1600)
echo "1600000" > $cpu/scaling_max_freq
;;
esac;
Nice to see this in the development section :thumbup:
-TeaM VeNuM Like A Boss
MiguelHogue said:
Nice to see this in the development section :thumbup:
-TeaM VeNuM Like A Boss
Click to expand...
Click to collapse
It isn't so such much for something to develop, I mainly just wanted the resources available the Tw themers and the like.
The parameters for the section said dev/mod/hack so I'm sure it fits in there somewhere.. I need to start getting some material in here though. . ... watch this...
EEECCCCCCHOOOO
khoeoeoeoe
ohohohohhh
See...
This one is a WIP so pay attention
Dual cpu screenstate script.. simple stuff
the way I have this setup it setup it will call powersave when screen is off. This is only practical if it calls another governor when the screen comes back on, so change it from "sh /data/local/pegasus" to "sh wherever you have a gov script" or to
"echo govofchoice > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor"
Code:
#!/system/bin/sh
#
#
sleep 1m
while [[ "awake" = $AWAKE ]]
do
AWAKE=`cat /sys/power/wait_for_fb_wake`
if [ "awake" = $AWAKE ]
then
echo "1" > /sys/devices/system/cpu/cpu1/online
echo "1" > /sys/devices/system/cpu/cpu0/online
sh /data/local/Pegasus
fi
sleep 2
ASLEEP=`cat /sys/power/wait_for_fb_sleep`
if [ "sleeping" = $ASLEEP ]
then
echo "0" > /sys/devices/system/cpu/cpu1/online
echo "0" > /sys/devices/system/cpu/cpu0/online
echo "powersave" > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor
fi
sleep 2
done
exit 0
PhAkEer said:
Anybody want a script to odex data/apps??
Wrote it this morning.
Just need dexopt-wrapper and then execute this.. no reboot, apps keep their classes.dex for the future as well...
Code:
#!/system/bin/sh
J=/system/framework
A=/data/app
W=/system/xbin/dexopt-wrapper
mount -o remount,rw /system /system
mount -o remount,rw /data /data
rm -f $A/*.odex
for i in $A/*
do
name=`basename $i .apk`
$W $A/$name.apk $A/$name.odex $J/core.jar:$J/core-junit.jar:$J/bouncycastle.jar:$J/ext.jar:$J/framework.jar:$J/framework2.jar:$J/android.policy.jar:$J/services.jar:$J/apache-xml.jar
chmod 0644 $A/$name.odex
done
echo $i
sleep 2
exit 0
( and telling me if this stuff does or does not work is NOT off topic ftr )
Click to expand...
Click to collapse
Where do we get a copy of dexopt-wrapper? I downloaded the odex station that has it in the zip you had somewhere, but I get status7 error when flashing it.
Sent from my SPH-D710 using Xparent Blue Tapatalk 2
Just extract the wrapper to xbin and youre gtg
Warning: hideous sig acomin..
Need a change of pace?
Odexing Data with a simple script
or
Change your boot splash-screen in two steps
in this morning i tried to go back to stock lollipop from CloudyG3 2.2 after seeing you can actually root stock now and tried the kdz method posted somewhere here. unfortunately the software (LG Flash tool crashed <<i hit the roof when i saw this software was unstable>> in the middle of the process and my phone is now bricked cant access anything not even download mode). nevertheless i saw there are some methods to reset the motherboard(i believe?1??!?!) MSM8974AC especially Smart Boot Diag tool but somehow it doesnt work for me . in the log.txt i have this >> [ I dont know if it helps]
It's not the first time i brick it but i've managed to unbrick it several times but now i think there's no hope.
---------------------------- Start Logging ----------------------------
>> USB Status : Qualcomm HS-USB QDLoader 9008 (COM8)
>> Ready to access the target board...
>> BootLoader File : All EU Global_XXXX_XXXX.mbn
>> 1. Model : All EU Global , 2. Suffix : XXXX , 3. Operator : XXXX
>> Bootloader : All EU Global_XXXX_XXXX.mbn
>> AP Chip : MSM8974_G3 , BootLoader : All EU Global_XXXX_XXXX.mbn
>> Trying Connection To Device with sahara protocol for AP Chip.
>> Successfully Connection To Device with sahara protocol for AP Chip.
>> connected with Sahara Protocol successfully.
>> Loading flash to SYS_IMEM.
>> Loading 0 Kbytes to SYS_IMEM.
>> Loading 4 Kbytes to SYS_IMEM.
>> Loading 8 Kbytes to SYS_IMEM.
>> Loading 12 Kbytes to SYS_IMEM.
>> Loading 16 Kbytes to SYS_IMEM.
>> Loading 20 Kbytes to SYS_IMEM.
>> Loading 24 Kbytes to SYS_IMEM.
>> Loading 28 Kbytes to SYS_IMEM.
>> Loading 32 Kbytes to SYS_IMEM.
>> Loading 36 Kbytes to SYS_IMEM.
>> Loading 40 Kbytes to SYS_IMEM.
>> Loading 44 Kbytes to SYS_IMEM.
>> Loading 45 Kbytes to SYS_IMEM.
>> Successfully Loaded to SYS_IMEM.(Total 45 Kbytes)
>> Flash Image was normally loaded to SYS_IMEM.
>> Checking for device status.
>> [Verifying Hello Protocol]
>> Sending Hello request 0 time(s).
>> SendSync EHOST_HELLO_RSP OK.
>> Hello Response OK.
>> Got Hello response for Hello request.
>> [Verifying Security Protocol]
>> Security Response OK.
>> Connected to flash bootloader.
1> ----------------------------------------------------------------------
>> PBL SOFTWARE HISTORY
1> ----------------------------------------------------------------------
>> 1.Smart Boot Diagnosis Tool v1.3.1 <Analysis Tool for Booting failure>
>> 2.PBL_VERSION_NUMBER [fc021834] = 1c6c6162
1> ----------------------------------------------------------------------
1> ----------------------------------------------------------------------
>> SECURE_BOOT_INFORMATION
1> ----------------------------------------------------------------------
>> [QFPROM - AP Anti-rollback Region of OEM Region ]
>> QFPROM_AP_ANTIROLLBACK_1 [0xFC4B80B8] = 0x00000000
>> QFPROM_AP_ANTIROLLBACK_2 [0xFC4B80BC] = 0x00000000
>> QFPROM_AP_ANTIROLLBACK_3 [0xFC4B80C0] = 0x00000000
>> QFPROM_AP_ANTIROLLBACK_4 [0xFC4B80C4] = 0x00000000
1> ----------------------------------------------------------------------
>> QFPROM_DEVICE_SN_1 [0xFC4B81F0] = 0x0C42B2CB
>> QFPROM_DEVICE_SN_2 [0xFC4B81F4] = 0x8800000B
1> ----------------------------------------------------------------------
>> QFPROM_MSA_ANTIROLLBACK_1 [0xFC4B80C8] = 0x00000000
>> QFPROM_MSA_ANTIROLLBACK_2 [0xFC4B80CC] = 0x00000000
1> ----------------------------------------------------------------------
>> [QFPROM QFuse INFO]
>> QFPROM_OEM_ID_LSB [0xFC4B80F0] = 0x00310000
>> QFPROM_OEM_ID_MSB [0xFC4B80F4] = 0x00000000
>> QFPROM_SECURE_BOOT_ENABLE_LSB [0xFC4B83F8] = 0x00202020
>> QFPROM_SECURE_BOOT_ENABLE_MSB [0xFC4B83FC] = 0x00000000
>> QFPROM_JTAG_DISABLE_LSB [0xFC4B80E8] = 0x3FC000C0
>> QFPROM_JTAG_DISABLE_MSB [0xFC4B80EC] = 0x040001FE
1> ----------------------------------------------------------------------
>> JTAG_ID [0xFC4BE0E0] = 0x107B40E1
>> OEM_ID [0xFC4BE0E4] = 0x00310000
>> SERIAL_NUM_MSB [0xFC4B81F4] = 0x8800000B
>> SERIAL_NUM_LSB [0xFC4B81F0] = 0x0C42B2CB
>> [SECURITY INFO]
>> OEM_CONFIG_ROW0_LSB_ADDR [0xFC4B80E8] = 0x3FC000C0
>> OEM_CONFIG_ROW0_MSB_ADDR [0xFC4B80EC] = 0x040001FE
>> OEM_CONFIG_ROW1_LSB_ADDR [0xFC4B80F0] = 0x00310000
>> OEM_CONFIG_ROW1_MSB_ADDR [0xFC4B80F4] = 0x00000000
>> FEAT_CONFIG_ROW0_LSB_ADDR [0xFC4B80F8] = 0x00B08010
>> FEAT_CONFIG_ROW0_MSB_ADDR [0xFC4B80FC] = 0x00000000
>> FEAT_CONFIG_ROW1_LSB_ADDR [0xFC4B8100] = 0x00000001
>> FEAT_CONFIG_ROW1_MSB_ADDR [0xFC4B8104] = 0x0004785F
1> ----------------------------------------------------------------------
>> Start Address : 0xfc102140
>> End Address : 0xfc102c80
1> ----------------------------------------------------------------------
>> PBL_APPS LOG
1> ----------------------------------------------------------------------
>> PBL_LOG_COUNT=12
>> LOG_CODE :: 0xef010800 [ DECODED : 0x00010800 ]
>> TIMESTAMP :: 0x0002bcfb
>> LOG_CODE :: 0xef0f0203 [ DECODED : 0x000f0203 ]
>> TIMESTAMP :: 0x0002c387
>> LOG_CODE :: 0xef010802 [ DECODED : 0x00010802 ]
>> TIMESTAMP :: 0x0002f8eb
>> LOG_CODE :: 0xef010804 [ DECODED : 0x00010804 ]
>> TIMESTAMP :: 0x00030f34
>> LOG_CODE :: 0xef010806 [ DECODED : 0x00010806 ]
>> TIMESTAMP :: 0x00031286
>> LOG_CODE :: 0xef010808 [ DECODED : 0x00010808 ]
>> TIMESTAMP :: 0x0003132f
>> LOG_CODE :: 0xef01080a [ DECODED : 0x0001080a ]
>> TIMESTAMP :: 0x000313df
>> LOG_CODE :: 0xef01080c [ DECODED : 0x0001080c ]
>> TIMESTAMP :: 0x00031423
>> LOG_CODE :: 0xef5d0201 [ DECODED : 0x005d0201 ]
>> TIMESTAMP :: 0x0003150f
>> LOG_CODE :: 0xef0f0600 [ DECODED : 0x000f0600 ]
>> TIMESTAMP :: 0x0005dc58
>> LOG_CODE :: 0xef0f0500 [ DECODED : 0x000f0500 ]
>> TIMESTAMP :: 0x08d833d0
>> LOG_CODE :: 0xefa00502 [ DECODED : 0x00a00502 ]
>> TIMESTAMP :: 0x08daeffd
1> ----------------------------------------------------------------------
>> < PBL DUMP LOG >
1> ----------------------------------------------------------------------
>> 1> PBL_GENERAL_LOG_FUNC_EXEC
1> PBL_FUSE_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_SDC_LOG_DEFAULT
1> PBL_FUSE_USB_ENUM_TIMEOUT
1> PBL_FUSE_AP_SW_REV
1> PBL_AUTHENTICATION_LOG_DEFAULT
>> Logged Time : 2015-04-03 18:37:38...successfully Completed.
>> Saved Log File(LOG_All EU Global_XXXX_XXXX_20150403_183738.txt) successfully.
Can anyone help me or give me some suggestions please? ( i dont want to send it to lg service at the moment because i think warranty is void and even if they repair it it would take 1-2 months ) i'll send it however if i have no other choice.
I FOUND THE SOLUTION IN THIS TOPIC : http://forum.xda-developers.com/lg-g3/general/unbrick-lg-g3-qhsusbbulk-qualcomm-9008-t3072091
many thanks to @willcracker Dont forget to donate to this guy!
Hi everyone,
LG G3 with black screen when connecting to usb it shows QSHUSB_BULK in device manager
I managed to install driver for it on my 32bit computer
Got linux
Got Mac
Got Windows 32/64
Just need the answer for how do I unbrick this phone?!
maybe there is some debrick sd for it?
UPDATE:
I got my hands on LG Smart Boot Diagnostic Tool
and the device shuts down when the process starts
LOG:
>> ---------------------------- Start Logging ----------------------------
>> USB Status : Qualcomm HS-USB QDLoader 9008 (COM42)
>> Ready to access the target board...
>> BootLoader File : LGVS985_AVRZ_VRZ.mbn
>> 1. Model : LGVS985 , 2. Suffix : AVRZ , 3. Operator : VRZ
>> Bootloader : LGVS985_AVRZ_VRZ.mbn
>> AP Chip : MSM8974_G3 , BootLoader : LGVS985_AVRZ_VRZ.mbn
>> Trying Connection To Device with sahara protocol for AP Chip.
>> Successfully Connection To Device with sahara protocol for AP Chip.
>> connected with Sahara Protocol successfully.
>> Loading flash to SYS_IMEM.
>> Loading 0 Kbytes to SYS_IMEM.
>> Loading 4 Kbytes to SYS_IMEM.
>> Loading 8 Kbytes to SYS_IMEM.
>> Loading 12 Kbytes to SYS_IMEM.
>> Loading 16 Kbytes to SYS_IMEM.
>> Loading 20 Kbytes to SYS_IMEM.
>> Loading 24 Kbytes to SYS_IMEM.
>> Loading 28 Kbytes to SYS_IMEM.
>> Loading 32 Kbytes to SYS_IMEM.
>> Loading 36 Kbytes to SYS_IMEM.
>> Loading 40 Kbytes to SYS_IMEM.
>> Loading 44 Kbytes to SYS_IMEM.
>> Loading 45 Kbytes to SYS_IMEM.
>> Successfully Loaded to SYS_IMEM.(Total 45 Kbytes)
>> Flash Image was normally loaded to SYS_IMEM.
>> Checking for device status.
>> [Verifying Hello Protocol]
>> Sending Hello request 0 time(s).
>> SendSync EHOST_HELLO_RSP OK.
>> Hello Response OK.
>> Got Hello response for Hello request.
>> [Verifying Security Protocol]
>> Security Response OK.
>> Connected to flash bootloader.
1> ----------------------------------------------------------------------
>> PBL SOFTWARE HISTORY
1> ----------------------------------------------------------------------
>> 1.Smart Boot Diagnosis Tool v1.3.1 <Analysis Tool for Booting failure>
>> 2.PBL_VERSION_NUMBER [fc021834] = 1c6c6162
1> ----------------------------------------------------------------------
1> ----------------------------------------------------------------------
>> SECURE_BOOT_INFORMATION
1> ----------------------------------------------------------------------
>> [QFPROM - AP Anti-rollback Region of OEM Region ]
>> QFPROM_AP_ANTIROLLBACK_1 [0xFC4B80B8] = 0x00000000
>> QFPROM_AP_ANTIROLLBACK_2 [0xFC4B80BC] = 0x00000000
>> QFPROM_AP_ANTIROLLBACK_3 [0xFC4B80C0] = 0x00000000
>> QFPROM_AP_ANTIROLLBACK_4 [0xFC4B80C4] = 0x00000000
1> ----------------------------------------------------------------------
>> QFPROM_DEVICE_SN_1 [0xFC4B81F0] = 0x0DFB2858
>> QFPROM_DEVICE_SN_2 [0xFC4B81F4] = 0x8800000B
1> ----------------------------------------------------------------------
>> QFPROM_MSA_ANTIROLLBACK_1 [0xFC4B80C8] = 0x00000000
>> QFPROM_MSA_ANTIROLLBACK_2 [0xFC4B80CC] = 0x00000000
1> ----------------------------------------------------------------------
>> [QFPROM QFuse INFO]
>> QFPROM_OEM_ID_LSB [0xFC4B80F0] = 0x00310000
>> QFPROM_OEM_ID_MSB [0xFC4B80F4] = 0x00000000
>> QFPROM_SECURE_BOOT_ENABLE_LSB [0xFC4B83F8] = 0x00202020
>> QFPROM_SECURE_BOOT_ENABLE_MSB [0xFC4B83FC] = 0x00000000
>> QFPROM_JTAG_DISABLE_LSB [0xFC4B80E8] = 0x3FC000C0
>> QFPROM_JTAG_DISABLE_MSB [0xFC4B80EC] = 0x040001FE
1> ----------------------------------------------------------------------
>> JTAG_ID [0xFC4BE0E0] = 0x107B40E1
>> OEM_ID [0xFC4BE0E4] = 0x00310000
>> SERIAL_NUM_MSB [0xFC4B81F4] = 0x8800000B
>> SERIAL_NUM_LSB [0xFC4B81F0] = 0x0DFB2858
>> [SECURITY INFO]
>> OEM_CONFIG_ROW0_LSB_ADDR [0xFC4B80E8] = 0x3FC000C0
>> OEM_CONFIG_ROW0_MSB_ADDR [0xFC4B80EC] = 0x040001FE
>> OEM_CONFIG_ROW1_LSB_ADDR [0xFC4B80F0] = 0x00310000
>> OEM_CONFIG_ROW1_MSB_ADDR [0xFC4B80F4] = 0x00000000
>> FEAT_CONFIG_ROW0_LSB_ADDR [0xFC4B80F8] = 0x00B08010
>> FEAT_CONFIG_ROW0_MSB_ADDR [0xFC4B80FC] = 0x00000000
>> FEAT_CONFIG_ROW1_LSB_ADDR [0xFC4B8100] = 0x00000001
>> FEAT_CONFIG_ROW1_MSB_ADDR [0xFC4B8104] = 0x0004785F
1> ----------------------------------------------------------------------
>> Start Address : 0xfc102140
>> End Address : 0xfc102c80
1> ----------------------------------------------------------------------
>> PBL_APPS LOG
1> ----------------------------------------------------------------------
>> PBL_LOG_COUNT=12
>> LOG_CODE :: 0xef010800 [ DECODED : 0x00010800 ]
>> TIMESTAMP :: 0x0002bbdd
>> LOG_CODE :: 0xef0f0203 [ DECODED : 0x000f0203 ]
>> TIMESTAMP :: 0x0002c282
>> LOG_CODE :: 0xef010802 [ DECODED : 0x00010802 ]
>> TIMESTAMP :: 0x0002f7ef
>> LOG_CODE :: 0xef010804 [ DECODED : 0x00010804 ]
>> TIMESTAMP :: 0x00030e39
>> LOG_CODE :: 0xef010806 [ DECODED : 0x00010806 ]
>> TIMESTAMP :: 0x00031188
>> LOG_CODE :: 0xef010808 [ DECODED : 0x00010808 ]
>> TIMESTAMP :: 0x00031236
>> LOG_CODE :: 0xef01080a [ DECODED : 0x0001080a ]
>> TIMESTAMP :: 0x000312c8
>> LOG_CODE :: 0xef01080c [ DECODED : 0x0001080c ]
>> TIMESTAMP :: 0x00031308
>> LOG_CODE :: 0xef5d0201 [ DECODED : 0x005d0201 ]
>> TIMESTAMP :: 0x00031403
>> LOG_CODE :: 0xef0f0600 [ DECODED : 0x000f0600 ]
>> TIMESTAMP :: 0x0005db72
>> LOG_CODE :: 0xef0f0500 [ DECODED : 0x000f0500 ]
>> TIMESTAMP :: 0x1ebc8d2d
>> LOG_CODE :: 0xefa00502 [ DECODED : 0x00a00502 ]
>> TIMESTAMP :: 0x1ebf491d
1> ----------------------------------------------------------------------
>> < PBL DUMP LOG >
1> ----------------------------------------------------------------------
>> 1> PBL_GENERAL_LOG_FUNC_EXEC
1> PBL_FUSE_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_GENERAL_LOG_DEFAULT
1> PBL_SDC_LOG_DEFAULT
1> PBL_FUSE_USB_ENUM_TIMEOUT
1> PBL_FUSE_AP_SW_REV
1> PBL_AUTHENTICATION_LOG_DEFAULT
>> Logged Time : 2015-07-13 20:15:10...successfully Completed.
>> Saved Log File(LOG_LGVS985_AVRZ_VRZ_20150713_201510.txt) successfully.
Click to expand...
Click to collapse