Related
Hi, i m very happy with the new rom but i have a problem.
I set my emails accounts to periodically (30 minutes) check the account. With other roms when the precess was done then the connection was closed. With the new ROM the UMTS connection keeps stablished and the battery is out in a few hours. Does somebody know how to avoid it??
Thanks...
Same problem here... anybody??
Thanks in advance.
-......and the "always on" is set to 0.....
I am afraid that would undermine the whole definition of Push Mail. So it could very well be that it is impossible.
I remember reading an article about Push Mail and there one of the Microsoft engineers has been talking about that if you use GPRS the battery consumption is much and much less. But hey then whty buy a 3G phone. Also as I understand the GPRS is not able to properly handle the GSM simultaneously. At least I know in QTEK 110S when GPRS is actively downloading data you are unreachable for calls.... UMTS makes that possible.
I suppose it...but now ...
1) I cant automatically check my email (the connection keeps on)
2) I cant automatillally download the weather forecast(the connection keeps on).
......
I cant schedule any application that uses any connection because it keeps on and it drains the battery very quickly.
What can i do?
thanks
the weather program should have a seeting to use an active connection if av ailable. At least I have seen it in some weather programs. And if yours does not have it then get another one.
About other progs that need a connection. If I start IE I can just start browsing and works fine.
About you not being able to automatically check e-mail? I thought you enabled the Push email so what are you talking abouy. It automatically pushes emails to you ?????
ye, yes but what i want is when the program (mail, pocket weather, etc) finishs to use the connection then it is shutted down by the OS.
My job is Windows CE software developer and this is a problem. BEFORE (with old roms) when a program needs a connection the it requests a connection to the Connection manager. Then after use it, the program usually release it (using the connection manager). When no programs needs a connection then the connection manager shutted down the connection (if it was GPRS or UMTS). With the new ROM the connection manager doesnt shut down the connection.....
Yea you are right....
It is the disconnect part.
Well the battery drain is more then.
But hey I am not so bothered because I can load the battery at home in the office and in the car and when I go on vacation I turn the Pushmail offf
semi solved
Hi,
I ve wrote a little C program, 5 Kb. This program monitor any posible GPRS=UMTS connection. If it detects that this connection isnt used in 1 minute(no incoming bytes in one minute) then the connection will be closed.
this program hasnt UI so you will not see anything when you execute it. I will improve it adding a botton icon allowing the set the "one minute" parameter and the posibility to exit it....Obviously the program doesnt run when the device is suspended......
.. it should be placed in \windows\startup folder to run after each reset....
Hi dherrero,
Thanks for posting a great program. I had exactly the same issue as this but your program works perfectly and it disconnects it when the connection is not used for a minute or so.
The only probelm I have now is I equally get disconnected by this program when I am browsing websites with PIE and that is very annoying. I would appreciate it if you could modify this program to make it work only for email checking.
Kind regards,
Hi,
I am improving this little program. it isnt finished but it solves your problem. I recommend you to put it in rom and put a link in windows\starup.
When the system boots you will see a little white-blue icon in the bottom-right.
If you click this icon you will see a screen that show:
1) Bytes received in current connection.
2) Connections that the program has closed.
3) Startup time.
4) Connections checks done. (one each 30 seconds)
5) Last check date
6) Last close date.
And 4 buttons .
1) Disable: It's interesting for you. It disables the action of closing the connections.
2) Enable. The opposite. (by default it is enabled)
3) OK. Hide this screen
4) Close: Close the program.....
I hope it is usefull to you....
You can try also this: http://www.gb-soft.cz/XDAII/product_gprs_tweak_wm5pe_en.htm
hi dherrero
from where can I download your prog?
tx for help
You have to login, or register if you havent, and you will see the link.....
Hi dherrero,
Thanks for getting back so promptly. It works nice on my device and now I can manually disable it directly from the Today screen when I need to.
A minor problem I found is that the characters on the Connection Manager control panel get truncated. This is probably due the fact that I have a Japanese ttc font installed to replace the default system font by tweaking the registry "HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\FontLink\SystemLink\".
I hope this helps your development. Thanks again...
Hi again,
I always develop in VGA, using ozVGA. Now i ve changed the positions and now it looks correctly in vga and sevga.
Hi dherrero,
Thanks a lot!
It now runs flawlessly...
Would it be possible to develop a cab file that would allow you to automatically update the Diamond's weather each time it was connected to a PC? This would be really useful...
AFAIK it's already enabled by default under weather settings page
"Automatically update weather info"
I have the same problem. It updates automatically, but only when it is selected, not when it synchronises.
Very frustrating, cos every time I scroll to the weather app, it freezes for up to 30s whilst it updates. It also adds cost, since it updates over the phone comms if it's not connected.
Could definitely use a tweak here - if only I could find how to do that....
andreapappy said:
AFAIK it's already enabled by default under weather settings page
"Automatically update weather info"
Click to expand...
Click to collapse
Yeah this is true but I have deselected this because of network charges. I just would like it to recognise the fact that it is docked and have the facitily to "update weather when connected". This would be real useful..
17-apg said:
Yeah this is true but I have deselected this because of network charges. I just would like it to recognise the fact that it is docked and have the facitily to "update weather when connected". This would be real useful..
Click to expand...
Click to collapse
Did you ever figure out how to do this? I don't have an internet plan and don't want to be charged. I sync my phone everynight to my pc so this would defintely be better for me as well.
I agree, a tweak that automatically updates the weather tab ONLY when connected through active sync would be great. This means you have regular updates but no extra charges.
Does this require some advanced scripts or something similar?
Guys,
I have had no feedback yet on this one. And I have no idea as to how it could be done. But the guys out there do I am sure. It would be so useful to have the weather sync over an active sync to PC connection; that way the weather would always be up to date without incurring any GPRS charges (for those of us who do not have 3G data plans!!)
This is sad, I am just writing so that the post will be on the front page. and maybe someone with the required skills will read it and help us out.
Another thing that could be updated when connected via Active Sync ist QuickGPS.
Maybe we should post this in the mortscript thread?
To be honest I don't know what I am talking about.
But I think a lot of people would find a tweak like this quite handy!
"download weather data when connected to a pc
Yes, I agree. Already on the HTC we have the ability to auto download QuickGPS data when connwcted to the PC. If we can do this then surely we should be able to "DOWNLOAD WEATHER DATA WHEN CONNECTED TO A PC". So, i think this could be a very useful add on for our phones...please
I can remember a discussion about this topic. Someone already managed to find the database entries responsible for the weather, but there was no success changing them.
I would also like to see some success, but I think this requires some advanced techniques.
Regards,
Zuzler
I have a Tilt 2 from AT&T running Windows Mobile 6.5. I got it in October.
Sometimes my phone's clock will get behind, displaying a time that is an hour or more off. This morning, for example, I had the phone's alarm set for 9am. I woke up at 10am. When I looked at my phone, the clock displayed 8:30am. I power cycled it and it displayed the correct time.
My apartment has lousy cell reception, and I often have no signal at all when inside. Does this phone/OS rely on the cellular network to know what time it is?
Has anyone experienced similar behavior? Does anyone know if there is a fix for this?
I don't think I can trust my phone to wake me up until I find a way to fix this.
Does this happens when syncing Rhodium with pc?
or it happens even without sync?
The phone does rely on the network to keep time updated.
You could always turn off the automatic updating of the time. That may help.
1. Go to: Settings > Personal > Phone > Time Zone
2. Uncheck: Automatic change time zone and clock.
See if that helps.
orb3000 said:
Does this happens when syncing Rhodium with pc?
or it happens even without sync?
Click to expand...
Click to collapse
I don't sync my phone with PC, and I don't have any push notifications activated.
The phone does rely on the network to keep time updated.
prjkthack said:
You could always turn off the automatic updating of the time. That may help.
1. Go to: Settings > Personal > Phone > Time Zone
2. Uncheck: Automatic change time zone and clock.
See if that helps.
Click to expand...
Click to collapse
Turned off auto-updates as you suggested. Now we wait and see. Thanks for the suggestion.
__________________
Clock falls behind, can't find the automatic settings
For the second time now, I experienced the same problem, where my clock on the Tilt 2 was behind. This time it was during the night and it was off by about 3 hours, and even missed the date change. The first time it was something around an hour. I don't know what's worse, because with the long time you know it's wrong when it's light outside and the time says it shouldn't.
The phone wasn't hot either, so, as far as I know it wasn't busy doing something else. The cell reception was fine here, and I was not syncing. To correct the problem, I looked for the setting to automatically set the time, based on the network. It's not off by precisely one or more hours, so it doesn't look like a timezone itself. Note that I have TouchFlo disabled, and I use the Windows 6.5 Today screen, so it might be a bit different. I looked through several settings beside the clock, but can't find it. Unless it's one and the same of course.
Any idea what could be causing this? Thanks for the powercycle tip.
I disabled what prjkthack said, I needed also to disable the sync option from Sense. This works for 'My Location' but screws other world clocks. Looks like a sort of 'base' clock is set wrong...
i have this issue with the tp and the hd2 both with energyrom.
att tilt 2 clock and date off when updated to new stock rom
hi iam having the same problems with my time and date being wrong everytime i softreset. the minutes usually always seem to be right but a couple hours off always and then you have to go in and manually set the clock. i also had to set the date when i softreset. i tried the my location button, didnt work. also called htc and talked to someone who said the time did have to be set manually, but i really dont think he knew what he was talking about. and it should have exact time from network and sat/gpr connections or even wifi? stange
Interesting. It appears that we might be fighting two different problems then. One that is a timezone offset (i.e. the minutes are the same, but the hours are off), and a full stall of the clock (with the time being off a random amount of hours and minutes).
clock advances one hour every night
Hi,
I have a similar problem with my clock: every night the clock advances one hour. If I do not correct the time, it will be two hours in advance after two nights.
This is since the night, where the daylight saving time ended.
Can anyone help?
I've had my phone over 6 months and two days ago it started having issues with keeping the correct time...
Odd indeed.
Maybe it's ATT causing the problem?
Go into Settings/Personal/Phone, then click the GSM/UTMS services tab. Click on "Time Synchronization", then Get Settings. If the "automatic change time zone & clock" box is checked, uncheck it.
That turns off the synchronization of the Tilt2's clock with the cell network, so that you can synch the time yourself. There are some third-party programs that will let you synch off a NTP server or the phone's GPS receiver -- I use Julien Schapman's Time Synchronizer.
It's not a att thing. I have the same problem since last week. I'm in Argentina and a couple of years ago we had daylight saving time. And the last year we had it we must change it on december 27th (the day it started to change in my phone in 2010. Now everytime i activesync with my pc it advaces 1 hour.
It's really annoying. And fyi my setting have disable automatic change timezone and clock!!
I don't know what to do
Cheers and happy new year
Ignacio
I'm in Argentina too, and having the same problem as Ignacio. The only thing I can add is that my Tilt2 started having this problem right after returning from Uruguay, which by the way, they are one hour ahead of us. My girlfriend has the same phone but she did not activate it while in Uruguay and she is not having this problem.
I really doubt it is just a Sync problem. I've tried every possible configuration and nothing. I wish it would be that simple.
We need a good chef for this one...
Regards
Fito
Offical fix: http://www.htc.com/europe/SupportViewNews.aspx?dl_id=1070&news_id=851
Or just install a ROM that doesn't have this issue (included this fix).
Hi,
My weather widget shows my country as current location and not my town. Does anyone know how this current location thing exaclty work and how can I correct my problem. I can add my city manualy without any problems at all. Location tracking is turned on. But this damn widget still shows country and not the town I know that I can remove widget and add it again and select my town, but I want dynamic thing (current location). Tried weatherbug and it detects my location without any problems. Help and thanks.
My advice.. dont bother with the weather widget, all it does is tell you what you can find out by looking out the window.
rimvydukas said:
Hi,
My weather widget shows my country as current location and not my town. Does anyone know how this current location thing exaclty work and how can I correct my problem. I can add my city manualy without any problems at all. Location tracking is turned on. But this damn widget still shows country and not the town I know that I can remove widget and add it again and select my town, but I want dynamic thing (current location). Tried weatherbug and it detects my location without any problems. Help and thanks.
Click to expand...
Click to collapse
I had the same problem here (Ireland). It just listed my country as the current location. I decided to try a different weather app called snow storm. BUT... After I tried out this app I realised (coincidence?) that my current location started working in the standard weather app!!! It shows the area Im in now (or closest big town, usually correct within 2km). Im in Dublin and it shows all the different regions of the city as I drive around I don't know what caused it to suddenly work but it does now. When it started working it was on and off for a day to two. If I refreshed the weatehr sometimes it would jump back to Ireland(current) and if I refreshed again 2 or 3 times it would jump to Stillorgan(current). i.e. the local area. Now it does not jump to country at all and always lists the current area. No idea how it started working though. no updates etc. try refreshing the weather 4 or 5 times in a row and see if it still says your country and not your town? Actually, my mobile operator (O2) started selling the phone around about the time it started working?! maybe its linked to that?
I tried to install application you've mentioned, tried to refresh 6 times weather app - no change at all Tried to delete location and weather data - still no change It would be very interesting to know how this location thing deas exactly work at all. Because and world clock app shows my location as Lithuania and not my town which is capital of Lithuania:/ And one more thing - Vilnius is not mentioned in available timezones list when Dublin is there. Maybe this all thing is because of that?
That is strange. I would expect Vilnius to be there. I would expect the capital city of all EU countries to be there. I can only think it must somehow be network related. The phone naturally gets this location information from your network somehow. If the network do not provide this information to the phone in a certain way maybe it cannot deduce your location? the fact that mine works now and DID NOT work for 3 weeks when I first got the phone (I even have a post about this) I think it must be network. I changed nothing else with the phone and its perfect now. Does your network sell the HTC Desire? Do they plan to sell it? I think when they do, your location will start working.
Problem is that one guy I know has HTC legend and he is in the same network I am and his legend shows Vilnius without any single problem:/ It still would be very interesting to know how the phone detects location - does it use some kind of cell info, does it use internet. Because if I want location services to work I must turn on mobile network. And when location services are turned off my current location is Minsk I think because it is in the same time zone as I am and because it is in the database. Can you look at your phone's timezones? Are you able to see Vilnius in there?
I wish too the weather widget could give a forecast. Looks great but not exactly practical. Shame.
I had exactly the same problem as you, the weather app showed my country and not the town was in. But somehow it managed to jump to the city (in Sweden) I was currently staying in, but now when I´m 300km away it still shows the same town.
I don't think there´s anything wrong with the network because the widget called Latitude shows updates very frequently and tells me where I am even in very small towns.
I think it has to do with
Menu -> Settings -> Location -> USE GPS satellites... I think, not sure
Edit: Confirmed.
I had update disabled (i update the widget manually) and from the previous update it got stuck at my country (Macedonia).
I ticked the previously mentioned option, enabled the internet, chose to update the weather, and it located my exact region.
ljesh said:
I think it has to do with
Menu -> Settings -> Location -> USE GPS satellites... I think, not sure
Edit: Confirmed.
I had update disabled (i update the widget manually) and from the previous update it got stuck at my country (Macedonia).
I ticked the previously mentioned option, enabled the internet, chose to update the weather, and it located my exact region.
Click to expand...
Click to collapse
That's really obvious my friend! It´s like "Try restarting it" =)
Nah I know how to fix it, it worked for me.
Remove it from the home screen, then when you reattach it the widget (Clock as it's called) will ask you to choose a city and just simply pick "Current location" from the list. Remember to go to the weather app and update if the weather is not visible in the widget.
ljesh said:
I think it has to do with
Menu -> Settings -> Location -> USE GPS satellites... I think, not sure
Edit: Confirmed.
I had update disabled (i update the widget manually) and from the previous update it got stuck at my country (Macedonia).
I ticked the previously mentioned option, enabled the internet, chose to update the weather, and it located my exact region.
Click to expand...
Click to collapse
That's really obvious my friend! It´s like "Try restarting it" =)
Nah I know how to fix it, it worked for me.
Remove it from the home screen, then when you reattach it the widget (Clock as it's called) will ask you to choose a city and just simply pick "Current location" from the list. Remember to go to the weather app and update if the weather is not visible in the widget.
Nanchang?
Hi guys
I didn't want to create a new thread as I'm having similar problems to the OP.
Since yesterday, the current location and time on my home screen time/weather widget (the one with the flip clock and weather) shows that I'm in Nanchang, with the weather to suit (cos it certainly isn't 27 degrees celsius at 22:16 here in Leeds, West Yorkshire!).
I installed Gameboid last night, and a couple of games (roms); also NewsRoom, and installed Who Wants To Be A Millionaire 2010
I removed Radiant, and Toss It games to free up some space
I have tried selecting Leeds as the City when adding the clock widget, which is fine as it shows me the correct time and weather on the widget/home screen. However, the time on the taskbar at the top still shows as 22.23 (at moment of typing this), which is the time in Nanchang.
Any help will be greatly appreciated.
Cheers
Mo
It's ok guys. Seems to have been a glitch with network whilst I was at work cos as soon as I left Morley (Leeds), phone automatically straightened itself out. Weird. But I'm happy.
-------------------------------------
Sent via the XDA Tapatalk App
Hi,
when my HOX is lying near by PC Speakers, i can hear Internet Traffic over EDGE/UMTS excatly all 3 Minutes. (I hope u can understand what i mean)
I´m wondering about that bescause WIFI is active and connected, and i never had this with my DHD.
Due to optimizing Battery life, i disable mobile Network manually when i´m at home and have WIFI connected.
I use ARHD 9.1.0 with stock Kernel and EQS + APM + %Batterycircle + Autobrighness by jotha.
Baseband: 2.1204.135.20
Build; 2.17.401.2 CL89015
Any Ideas whats generating this traffic and why the HOX don´t use WIFI for that?
its normal gsm traffic. like if somebody sent you an sms, you would hear that sound. not sure why it didn't do it with dhd and now does with hox, but either way, shielded speakers are there to solve that problem. as for adapting your current speakers to shield them, not sure if its possible or not though.
lawrence750 said:
its normal gsm traffic. like if somebody sent you an sms, you would hear that sound. not sure why it didn't do it with dhd and now does with hox, but either way, shielded speakers are there to solve that problem. as for adapting your current speakers to shield them, not sure if its possible or not though.
Click to expand...
Click to collapse
Thanks for your Answer, but i don´t hear that Traffic if mobile Network is disabled, so i thinkt it can´t be "normal GSM Traffic".
oh i see what you mean..
might be network location services?
settings>location>google's location service.
i know the location services use wifi as well, but it might use mobile network in conjuction even if connected to wifi.. try disable that and see if it continues.
lawrence750 said:
oh i see what you mean..
might be network location services?
settings>location>google's location service.
i know the location services use wifi as well, but it might use mobile network in conjuction even if connected to wifi.. try disable that and see if it continues.
Click to expand...
Click to collapse
Thanks again, tested, but unfortunately the traffic is still there
try download osmonitor, might be other apps more specific that can help, but osmonitor should do the trick i hope.
set your screen not to turn off, just for ease..
goto the connections tab, process tab will also be useful and watch it until the noise happens. you're looking for either a process, that jumps to the top of the list when the sound happens (spike in cpu usage), and then does it every time the sound happens, or a connection, that ISN'T your local or external wifi ip address, but also has similar behaviour, ie the connection is created when the sound occurs, and is then gone a minute later.. (the connection should show an app name)
if you find an app that looks like it could be causing it, then try to uninstall it temporarily to see if it fixes the issue. if it does fix the problem, the next step would be to contact the developer of that app to request a fix for it. it could however be a system process causing the problem.
failing the above, you could try the same sort of diagnostics, but with logcat instead. i don't actually know how to initiate logcat, i'm sure a google will tell you how though.
Thanks again! (i´ll hit the Button )
Okay, got that app installed.
Unfortunately the Sound DOES NOT appear all 3 Minutes when the Display is on.
When it starts and i unlock my screen i cant see any new entries in the Connectionstab.
Processes the same, but "Android System" shortly came on Top. (maybe the Display Unlock is the Reason for that?)
BTW: Why i got 2 permanent open Connections?
1. Google Bookmark-Sync (Whois -> Google)
2. Downloadmanager (Whois -> "The New York Internet Company")
Not idea what that could be.
blahquader said:
Thanks again! (i´ll hit the Button )
Okay, got that app installed.
Unfortunately the Sound DOES NOT appear all 3 Minutes when the Display is on.
When it starts and i unlock my screen i cant see any new entries in the Connectionstab.
Processes the same, but "Android System" shortly came on Top. (maybe the Display Unlock is the Reason for that?)
BTW: Why i got 2 permanent open Connections?
1. Google Bookmark-Sync (Whois -> Google)
2. Downloadmanager (Whois -> "The New York Internet Company")
Not idea what that could be.
Click to expand...
Click to collapse
you should be able to set the display to never turn off in settings>display and gestures
i don't think it'll be very easy if even possible to find it if the screens off (the spike would only be there for a second or 2, by the time it's unlocked etc it will have disappeared)
the other connections, first one is probably the google account sync, and not sure about download manager, maybe something got stuck, you could try clearing data for the download app, but to be honest i doubt that they're any problem anyway so probably nothing to worry about
edit: the download manager bit judging by the whois could be an app relating to that? do you have anything similarly named installed?
lawrence750 said:
you should be able to set the display to never turn off in settings>display and gestures
i don't think it'll be very easy if even possible to find it if the screens off (the spike would only be there for a second or 2, by the time it's unlocked etc it will have disappeared)
the other connections, first one is probably the google account sync, and not sure about download manager, maybe something got stuck, you could try clearing data for the download app, but to be honest i doubt that they're any problem anyway so probably nothing to worry about
edit: the download manager bit judging by the whois could be an app relating to that? do you have anything similarly named installed?
Click to expand...
Click to collapse
This is crazy - when the screen is on, the sound isnt audible. It only happens when the screen is off.
In the Connections Tab is only one Connection without my WiFi-IP, and whois shows me its a DNS Server from my Carrier (vodafone).
In the Process Tab i can see that "System" comes up on Top for ca 2 seconds, further no action.
The 2 Connections which stays established:
Clearing the Donwloadmanager Data was a Success... Thanx again.
The Connection to Google from "Google Bookmark-Sync" is still there. Gmail Sync is deactivated in accounts.
I think i´ll give it up and live with it