im a noob to all of this but i just bought a tilt with PDA Corner Ultimate ROM wm 6.5 and ive noticed that the fn function on the key board is a little messed up the secondary signs are in diffrent places then shown and also if im texting and ok out of it the screen gose back to the way it would if the phone was closed even tho its not any ideas?
Welcome to the forum
perhaps you´ll have to do a hard reset, it always helps
Have a read here:
http://wiki.xda-developers.com/index.php?pagename=HTC_Kaiser
Good luck,
Related
Mod, please move my message to Hermes WIN Mob 6 forum
I upgraded to WM 6 with the repackaged version of the ROM WM6 Dopod WWE 3.54.707.3 yesterday and mighty pleased with it, however I have one problem and I do not know if it is ROM related or just some setting I've screwed up in the process of changing a lot of settings.
When I turn off the phone in Comm manager and turn it on later the phone will not find the network and keeps asking for the phone pin. Entering the PIN you can see it searching on the antenna icon at top of the Today screen but then it just pops up the Phone PIN screen repeatedly.
The only way to get the phone back on is a soft reset. Pretty annoying as I turn off the phone regularly each day
Also I do not have the old flight mode/wifi balloon now when tapping on the antenna/wifi icons in main sceen, I assume this has been dropped from WM5?
Any ideas guys?
Al
moving to hermes.
Alabama978 said:
Mod, please move my message to Hermes WIN Mob 6 forum
I upgraded to WM 6 with the repackaged version of the ROM WM6 Dopod WWE 3.54.707.3 yesterday and mighty pleased with it, however I have one problem and I do not know if it is ROM related or just some setting I've screwed up in the process of changing a lot of settings.
When I turn off the phone in Comm manager and turn it on later the phone will not find the network and keeps asking for the phone pin. Entering the PIN you can see it searching on the antenna icon at top of the Today screen but then it just pops up the Phone PIN screen repeatedly.
The only way to get the phone back on is a soft reset. Pretty annoying as I turn off the phone regularly each day
Also I do not have the old flight mode/wifi balloon now when tapping on the antenna/wifi icons in main sceen, I assume this has been dropped from WM5?
Any ideas guys?
Al
Click to expand...
Click to collapse
Do a Hard Reset then test the ROM out for a few days. If you are not satisfied with it try one of the cooked WM6 versions (since they are superior).
Thanks
I will play with it as you suggest, also forgot to mention the keyboard no longer illuminates :-(
My radio too is an old version 1.03.03.10. Should I upgrade it first before flasing another ROM ( I have Hard Spl loaded OK)
After adding all my email settings for different accounts and loading apps I don't feel like a change of ROM for a few more days ;-)
Thanks,
Al
i think the problem is with your radio, try any radio at least 1.23 and above
I've been on WM6 since the second day I had my hermes, about 3-4 months ago. I've been on 4 or 5 different trips on planes requiring flight mode. Various LSVW and Sleuth ROMs used with various radios from 1.38 and on...
Not once, despite many layovers, have I had an issue with the phone not coming out of flight mode.
So, in my experiance, no, not a WM6 bug.
Alabama978 said:
Mod, please move my message to Hermes WIN Mob 6 forum
I upgraded to WM 6 with the repackaged version of the ROM WM6 Dopod WWE 3.54.707.3 yesterday and mighty pleased with it, however I have one problem and I do not know if it is ROM related or just some setting I've screwed up in the process of changing a lot of settings.
When I turn off the phone in Comm manager and turn it on later the phone will not find the network and keeps asking for the phone pin. Entering the PIN you can see it searching on the antenna icon at top of the Today screen but then it just pops up the Phone PIN screen repeatedly.
The only way to get the phone back on is a soft reset. Pretty annoying as I turn off the phone regularly each day
Also I do not have the old flight mode/wifi balloon now when tapping on the antenna/wifi icons in main sceen, I assume this has been dropped from WM5?
Any ideas guys?
Al
Click to expand...
Click to collapse
I have almost the same problem, but in my case it doesn't ask for PIN code. If I disable PIN request, everything is fine. Try to do the same and see if it's OK. This is the first ROM with this behaviour, but I can live with it in exchange of the amazing speed and phone respondivness !
I haven't seen this problem, but I do see a problem with opening a data connection after being in Flight Mode. It tries to connect to the provider 3-4 times (with quick connects), and then fails with an unable to connect message. At that point, I need to reset in order to connect to data again.
seems to be like the same problem that i am having!! i think its linked to the SOD bug, my herm100 continously reboots the 'radio' part of the phone.. when making a call the phone shows full signal however after placing the call the signal drops before connecting and it searches again for network... im sure that the phone is doing this whilst in standby mode too (maybe linking to the SOD problem) and since you've got you pin request on it seems to be cycling and asking for a pin code!! hope we can find a solution i've tried a few things but nothing seems to cure it!
Did anybody find a solution to this? My TyTn does the same
Hi,
I have a VODAFONE 1605 (a plain Hermes 200, a TyTN). It had the original Italian Vodafone WM5 ROM until last month when I decided upgrading it.
I first tried the CH Vodafone version of WM6 ROM, but I had to remove it quickly because for no apparent reason, it was not working with SMS at all (no SMS out, no SMS in...).
I then decided to use HTC WM6 ITA ROM and to apply manually all the needed configurations to use it with my VODAFONE.
It run perfectly until yesterday, when it stopped sending and receiving SMS.
This is very strange as I did not install any program since one week (at least) and it seems difficult for me to be able to find any reason.
Probably the pim.vol file grew too much it is not anymore able to handle more SMS (provided the infos are inside there) ?
I have no explanations available to me and I was not able to find any kind of hint digging into the forum...
I was only able to find some other people with similar problems in the last few days but on different platforms...
Is this maybe a WM6 bug ???
Any hint appreciated.
I'll in the meaningwhile backup all of my infos and proceed to a HR... I'll keep my fingers crossed...
Dear Mix,
I wish I could give you a good answer, but... well, maybe the answer is not really an answer, but it could be at least an hint for other people like you (ME !!!).
You do not want to lose all of your settings, all of your received SMS, you do not want to waste a lot of time setting everything as it was before, so an HR is REALLY the LAST solution for you. You would like to find a tricky path to follow to bypass this unlucky situation...
You already tried to SOFT RESET your device but you did not succeed. The problem is still there...
Well, there seems to be another kind of RESET, before the HARD RESET.
I would define it the "DEEP SOFT RESET", which is something more than a SOFT RESET, but it is right before the HARD RESET.
This kind of reset solved the above problem. I don't know why, I don't know how. It only worked.
The DEEP SOFT RESET is this: press OK and ON button and while pressing those two buttons, put your stilus into the reset hole, pressing the recessed switch. This will place you into the BOOTLOADER MODE.
Keep the device there, showing all the colors and Bootloader information for around 20 seconds at least (obviously, not connected to any cable).
Then, put your stylus again into the hole for resetting and press the internal swith one time more (without pressing any other button).
Your device will reset again, your data will still be into your TyTN and your TyTN will start loading all the data it still has inside.
As soon as I did this, the waiting SMS started reaching their addressee and they moved to "sent" folder.
Again, I'M SURE THIS DID NOT WORK WITH A NORMAL SOFT RESET (I ALREADY DID THIS 20 TIMES !!!). And again, I don't know wither HOW and WHY.
It only worked.
Good luck.
UPDATE:
I've noticed that the problem aroused again and I did a DEEP investigation, with a complete reset of my Hermes...
I then placed all the same programs inside and again no problem...
Problem came back once I used a program called Hermes Tweaker v2.1b which tweaks some parameters around in the WM device...
Once I reset the parameters to default again, the problem went away.
I'll have to discover which parameter is creating the problem...
I'll post the results here (beside fit4cat's pm...)
Good luck.
Hi bros.
I need a Big help here please!!><
My Samsung i900, i cant go into the Window.
Anyone know the way to "Key hard reset" please?
the problem is i used SPB backup, after back up phone book and pim and then auto reset.
After reset, only shows Windows mobile 6.1 screen but on the screen is white and only shows the today-top clock but cant go into setting page(so i cant use the hard reset icon><)
Please help...just got the i900 for 2 days but that SPB backup pissed me off><
Anyone know what is the way to Key hard reset please?
Thanks!!!
# sorry my english is very poor, if my message is hard to understand , i'm apologetic here.Thanks!!
can't help you
I'm sorry, but I can't help you.
Where did you buy the i900? That's the most perfect phone around. What country?
Thanks,
Wieger van der Wielen
Hi.
i'm form HK, i bought it form Singapore 2 days ago, hehe.
its 16Gb, around $6050HKD(still much cheaper then HK[water goods] price$8500hkd^3^)
press Call and Hang up button and hold it then tap the soft reset button. It should pop up reformat menu right away after you release the soft reset button. Make sure you don't press both Call and Hang up buttons to hard, because if you press too hard the middle button will be pressed.
hotwingz00 said:
Hi bros.
I need a Big help here please!!><
My Samsung i900, i cant go into the Window.
Anyone know the way to "Key hard reset" please?
the problem is i used SPB backup, after back up phone book and pim and then auto reset.
After reset, only shows Windows mobile 6.1 screen but on the screen is white and only shows the today-top clock but cant go into setting page(so i cant use the hard reset icon><)
Please help...just got the i900 for 2 days but that SPB backup pissed me off><
Anyone know what is the way to Key hard reset please?
Thanks!!!
# sorry my english is very poor, if my message is hard to understand , i'm apologetic here.Thanks!!
Click to expand...
Click to collapse
on top of the device, there is a soft reset button, use a think stylus click on it, dont click too hard. it will reset.
hope this helps.
geee .. i'm lost .. please ..
I installed HTC home final and now when i start Omnia it hangs and all i can see is call on left, menu on right and upper icons at the top .. i can't touch anything, i cannot tap anything ..
In my phone there is 250 contacts !!!??? OMG
Anycoll i908e
This is my first post here so thanks for your patience.
I purchased a phone from a friend that says Anycoll on the front not Anycall when I took out the battery it says i908 but the book he gave me says i900 and this phone looks alot like the Omnia i900 but as far as software it doesn't even have winows mobile on it.
1. Has anyone heard of this phone
2. How can I hard reset set this phone
3. Can I upgrade this phone with a different ROM
I preciate any help or info on this phone. Oh it is Chinese but simplified English. Thanks Moe
Hello
I am new here . I found Qtek 9090 PH20B. At the begining it have got problem with alignate screen ... I have try everithing but always stuck on this screen... Put WM 6.5 WM 2003 Romupdate everithing but still not work i think this phone is broken that is probably why i found it .. : ( on the left of display is little crap but i think its only glass to protect displey ... i think i am at end i have no ideas ..
some information i have serial/usb 2.06 its Qtek 9090 PH20b
if someone have some ideas to help me i will be very glad : )
i know my english is horrible
bye Henco
Hi,
maybe your touchscreen part is broken.
what kind of crap on the left side of the display?cracks?
its better to take your phone to a repair center and let them check it for you.
yea i think this is last thing to do
this crap is on the left up corner about 3 cm but you can normal touch screen and this alignate cross i dont thing it is problem with this crap but nobody know it i will see in reapair center
thanks
Sometimes my THC TP2 does not get on when press the on/off button.
When I turn on the phone, the screen turns off (which is normal). After a while I pick up my phone from the table of pick it out of my pocket (then it happens more often), sometimes I cannot get the phone on.
The only thing that I can do is a hard reset
Does anyone knows a solution to this problem.
I haven a DeepShining ROM installed, in case this matters. Before that I used NRGZ28 ROMs.
Regards,
Hatsiflatsi
Did you 'task 29' between flashes?
Moved to TP2 General forum.
Chef Central is meant only for Cooking issue.
Just did task29
Dear CrazyC,
Hadn't heard about this task29 before but googled around and found it.
After flashed a new spash screen with task29, I flashed my deepshining back again. Hope this is the solution to my problem.
If it is... Many thanks.
Will return to let you know....
Hatsifatsi