Hi. Good people .Please I need your help because I don't now if my PDA is broken, I had spent all my money for few days to buy me a hw6915. I tried to change the language German to Spanish the realized steps have been the following. - hw6915_up_2_spanish_flasher
when the installation process finish (I'm not sure if I disconnects the PDA from the base before finish the process because now on the screen appears the following.
Serial + hp + vG.39 but change when I conect it to the computer to : USB + hp + vG.39
I don't now what is the next step or what I can do but the thing is that now the PDA is inoprative.
please can you help me to repair or finish the process. ¿Any one have or can tell me if there are any tutorial to made it?.Thank you very much in advance for your cooperation. and sorry for my bad english
[email protected]
Related
I have I900XHHG4/AEHG4 and I would like just to change PDA part only from French to English. Furthermore I would like to make an image of my current ROM that I can restore in case of varranty issues (try to explain to French that their mobile speks English not very wise ).
How can I do it?
What is wrong
Step:
1. I am using GrandPrix like in attached picture.
2. I click Detect
3. I connect Omnia to USB
4. I reset omnia by clicking on the button reset
result: Omnia normaly loads and GrandPrix does not detect omnia.
What am I doing wrong?
interchange 3 & 4 but do it quick if you connect it past the samsung omnia splash screen it won't work.
Got it
I managed to get DXGH4 on my I900.
If it can help someone:
I did the procedure from above but I had to install win XP. First I used laptop with USB1.0 with Win XP and it didn't work.
hi
visit this website http://be.samsungmobile.com/FRA/supports/softwaremanuals/sof*tware.do and you'll find the language pack d'ont need to flash or upgrade it but you have to follow all the steps and becarefull when choosing language this pack contains french english and nederlands language .
Good luck
I have an omnia vodafone and i need the french language what do i do??
Hi All,
I am lately frustrated with my ASUS 320 that i bought in Italy from the cellphone provider TIM Italy.I was tol it 'll operate in English however the whole thing is in Italian , i just can hear you folks telling me to got it changed, yes unfortunately its a bit lately for that and quite honest the phone with the functions seems great.
So this is what i am trying to do and where i am failing.
From several memeber (thanks to all of them ) i tried flashing the WWE in diferent ways .First i have been told to use the chinese firmware's autorun.exe (aparently this ain't checking any version ) and using the WWE's bin file in the same folder and flash it.This method unfortunately failed and gives the message that i need to ensure that the language has to be the same as the phone ones.During soft reset at the startup screen , it fails again.
So at this point ASUS told me to sent it to their service center and to be installed with the english version of the windows mobile 6.1 , they said its a licensing thing and i had to pay for it.
So i am really at my last nerve i guess , is there anyone , anyone who can help me out here.Once again the device is from the italian cellphone service company TIM italia the language is Italian and i want to change (flash ) it to English start up screen gives
" ROM 4.10.0_0718_ITA_ITA"
Help is appreciate it
here is link for wwe rom released for p320
http://support.asus.com/download/download.aspx?SLanguage=en-us&model=P320
Hi Denjo,
Thanks for the reply , but unfortunately thats the sit where i am getting my ROM's and , again , tried it this morning and still the same problem happens.It tells me to make sure that its the same language , or durung soft reset (holding volume button down while resetting) it saiys failed .
Anyone else please help ?
Please, can any one help me with a rom for my Ipaq 914?
I used the Windows Vista to update my phone and now is dead...
Where can i find a custom rom or a flash.dio for this model.
Please help me, i need my phone to work...
Thanks in advance
Zyrus said:
Please, can any one help me with a rom for my Ipaq 914?
I used the Windows Vista to update my phone and now is dead...
Where can i find a custom rom or a flash.dio for this model.
Please help me, i need my phone to work...
Thanks in advance
Click to expand...
Click to collapse
download the rom from HP support site, and re-flash it on a non-vista computer --- should work.
How can I update the ROM of Ipag 914c to change the language.
My original language of my phone is French so I want change it into English(international).
thanks in advance
Same question. Change language. This is not possible by Hp update NL->WWE.
I've extracted flash.nbf file from setup then cut the first 3431 bytes then copied to sd card as flash.dio.
.
What keys i should hold for sdloader mode volup-ok-reset didn't work for me. Only when i press side wheel with ok then i was get is Dowloading Qualcomm Image at top of screen then nothing happen...
please give some advice what can i do to change language.
http://forum.xda-developers.com/showthread.php?p=3055586
anyone know how to use mtty with ipag 914
thanks
I upgraded my Ipaq 914c with original ROM from HP and i have same results. DEAD.
I do the same mistake...
problem is windows Vista. So, please charge you phone to min 40% and try to update with original ROM from HP site but on Windows XP.
Flash is passed and you phone has been alive....
Hi all
Hey i m having a big qty of hp ipaq 914c with me can anyone help me to change the spanish rom to english.pls reply as soon as possible bcoz i tried everything posted before on this forum but never succeed so pls pls pls help me.
and one more thing i had the same problem in hp rw6815 so one of our forum member gave me an RUU patched which really worked an it was very easy an effective so if anyone can provide sthe same kind of RUU patched for the ipaq 914c i be really very greatful to him
Regards,
Moiz.
rom language
specify language when downloading new rom from hp site... then your rom will be in that language
Bricked Ipaq 914C
Hy,
I've bricked my 914C during an upgrade (for up. in italian sp43440.exe) i've forgotten my sd card inside and now the device became a brick!
When i turn on the 914 the writing "RUU...." appears and remains stuck on this screen. When I want to turn off the phone i must to remove the battery.
I tried to follow the following guide http://forum.xda-developers.com/showthread.php?t=511548 but i don't have XP, only Vista, which doesn't work with the information reported.
Please help me!
Hi. Please . I tried to change the language German to Spanish after. I was start the process with . - hw6915_up_2_spanish_flasher
when the installation process finish (I'm not sure if I disconnects the PDA from the base before finish the process because now on the screen appears the following.
Serial + hp + vG.39 but change when I conect it to the computer to : USB + hp + vG.39
I don't now what is the next step or what I can do but the thing is that now the PDA is inoprative. NO GERMAN - NO SPANISH
please can you help me to repair or finish the process.Thank you very very very much in advance for your cooperation. and sorry for my bad english
[email protected]
Hi. Please . I tried to change the language German to Spanish after. I was start the process with . - hw6915_up_2_spanish_flasher
when the installation process finish (I'm not sure if I disconnects the PDA from the base before finish the process because now on the screen appears the following.
Serial + hp + vG.39 but change when I conect it to the computer to : USB + hp + vG.39
I don't now what is the next step or what I can do but the thing is that now the PDA is inoprative. NO GERMAN - NO SPANISH
please can you help me to repair or finish the process.Thank you very very very much in advance for your cooperation. and sorry for my bad english
[email protected]