Related
Ok, I'm new to cooking but I know my phone works as I've been running it under the Xda SE rom for a couple months and thought I would have a go at running ppc2003.
So I installed the standard upgrade from siemens to get the radio stack upgraded and make sure that it would all work fine and then got the bright idea that I need to customize it to my tastes.
I cooked up a rom at lumpi's site and it all seems to work till I turn it off or it times out and turns itself off at which point it will not turn back on unless i perform a soft reset, not for sync, phonecall or power button press, although the led for the phone still flashes.
If anyone has any suggestions as to how to fix this with out reflashing it would be great as this seems to be the only problem.
Thank you in advance for any help that anyone can provide.
Rom Version: A.30.09 Eng
Rom Date: 01/01/04
Radio Version: A.33.02
Protocol version: 1.3.3
does it come on when you put power on it by any means of charging?
no it doesn't it the led just changes to orange as it normally does when its charging. I thought about that when I posted as I saw there was another guy that was having the same problem.
Similar problem
Apo11yon
I've got similar problem, all external buttons locked after using xdaunlock have now tried 4 cooked roms,coming round to idea that it may be battery fault(see my postings?!)
Silent D :? :x
actually yes that was the posting i was referring to I have cooked two roms with the same result that being everything seems to work fine until the unit is turned off and then it wont turn back on without a softboot, i know my battery is good as I mentioned and I did switch back to the standard version on ppc2003 and it does work fine so I'm pretty sure its a software related problem, I was just hoping someone out there might be familiar with the problem and have a solution.
cook a rom with no added programs, install, and see if you have a problems after. i had thevsame prob bc i cooked kse truefax into tmo 4.1.16. Reflashed my device with thevsame rom and progs -kse, and all is well....
good luck!
thanks for the advice in both of the roms that I built I included truefax so I would be inclined to think that that would be it.
no prob.
did a rebuild less the fax app and it works great, should be a notice on the site that it may cause difficulties even better would be a listing of apps that conflict with each other or possibly the os
thanks again for the help fellow
So... The WM6 rom is back up on the dopod asia site!!
http://www.dopodasia.com/download/RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.30.11_108_Ship.exe
Seeing as I'm downloading at a good speed I'm assuming this hasn't been posted as yet.
A rapidshare copy is now also available:
http://rapidshare.com/files/4681657..._WWE_3.00.707.18_6275_1.46.30.11_108_Ship.exe
If anyone has any other mirrors please PM me and I will add then to this post.
(PS. Admins, I thought I would start a new thread for this as the old one is up to about 35 pages)
FAQ:
====
Q1: Is This the ANZ Version or the SEA Version:
A1: This seems to be the ANZ version as it is from the ANZ site and the description of the HTC download site is: "D810 WM6 GPS Enabled ROM code for Hutchison ‘3’ and Optus network – version 3.00.707.18"
Q2: I'm having trouble downloading off the HTC link, what should I do?
A2: There is a rapidshare link above, try that. If you are still having trouble PM me.
Q3: What is the difference between this version and the one released a couple of weeks ago?
A3: This is two minor revisions later - This previous release was 3.00.707.16. this is 18. Hopefully this fixed the problem some people were having with upgrading getting stuck at ~30%. EDIT: So far several people are still having this problem.
Q4: Does this ROM fix the TomTom bug involving the device code changing on each hard reset?
A4: According to a post on page 2 it does!
Q5: Is there a new SEA release?
A5: It appears HTC have re-released the same SEA rom with a new date. This seems to make sense as the problem with the original rom was partially related the 3 Australia.
Q6: Will this rom work on devices other than once branded as Dopod d810?
A6: It should, although you will need to remove the service provider lock (SPL) from your device first. Further information can be found here (do some searching and research prior to using this):
http://forum.xda-developers.com/showthread.php?t=299659&highlight=hard-spl
Q7: What is the deal with the languages?
A7: This is the World Wide English (WWE) edition which basically means it is in english. You can install this over a device which is in another language however you device will then be in english.
Q8: Will installing Hard-SPL (see Q6) void my warranty?
A8: Short answer is yet. However, you should be able to switch back to your original firmware etc prior to sending the device in for a warranty repair so you should be able to fool them.
Q9: Does this rom come with office and acrobat etc?
A9: It comes with Acrobat Reader LE and Office.
Q10: Can I read office 2007 files on my PDA with this ROM:
A10: Yes, you need this file:
http://forum.xda-developers.com/showthread.php?t=310832
Note, the link on the original post is dead, have a look at this post for the link:
http://forum.xda-developers.com/showpost.php?p=1402146&postcount=55
Thats all for now folks.
Oh yeah, shameless plug... If you need a theme for your windows mobile device (WM5 or WM6) please visit my website http://www.wm6themes.com You can also request a personalized theme on the site completely free (just upload an image and I'll create a theme for you)!
Work on HTC P3600?
I'm gonna be upgrading my Wizard w/ Faria WM6 on it to a P3600.
Anyone know if this ROM will work on the HTC P3600?
I'm assuming it will as my Wizard is a Qtek and the ROM is from HTC.
Any help would be great.
Thanks
jetlagjoe said:
I'm gonna be upgrading my Wizard w/ Faria WM6 on it to a P3600.
Anyone know if this ROM will work on the HTC P3600?
I'm assuming it will as my Wizard is a Qtek and the ROM is from HTC.
Any help would be great.
Thanks
Click to expand...
Click to collapse
I'm pretty sure it will work if your phone is SP unlocked. (Can't tell you 100% though)
A Rapidshare link has now been added for anyone having trouble with the dopod link. Rapidshare link is located in the original post.
Is this the SEA or ANZ version?
Not sure which it is. I got if off the ANZ site so I assume either they've unified them or it is ANZ.
EDIT: Just copied this of the dopod site so I assume it is ANZ - "D810 WM6 GPS Enabled ROM code for Hutchison ‘3’ and Optus network – version 3.00.707.18"
EDIT2: If anyone does have links to the SEA version please post it here and I will add it to the initial post.
grahamrb said:
So... The WM6 rom is back up on the dopod asia site!!
http://www.dopodasia.com/download/RUU_Trinity_DOPODASIA_WWE_3.00.707.18_6275_1.46.30.11_108_Ship.exe
Click to expand...
Click to collapse
This is a repost of ANZ Rom, with radio shipped on ANZ before and some minor change in the OS, probably a bugfix.
Main Changes:
in Application, OEMAPPS
StreamingPlayer
VideoStub
Streaming Video is now called Streaming Media
DLL
In OEMAPPS
Rtsphandler.dll
in OEMDRIVERS
rilgsm.dll
wavedev.dll
Removed CommManagerRes_dll.cab
All the other files seem to be the same: there are 1175 different files but as to me it is due to a new packaging.
The most interesting part, except streaming media, are the two new drivers rilgsm.dll and wavedev.dll
I'm trying to install these different files on my device... wavedev.dll seem to have cause my trinity to stuck at the animated boot screen with sound (a personal hack in the registry). After a soft reset the animated boot screen has been disabled. Rilgms.dll should be related to radio search and roaming switching, and probably is installed to support the new radio shipped. I've radio 1.46.00.11 and can't turn on the phone anymore
All the above is a mine investigation, if you think I'm wrong you can correct me. I'm open to learn more...
Ciao
Carlos..
Are u running this new rom then..
Stai usando questo nuova rom?
Grazie,
itlinux said:
Carlos..
Are u running this new rom then..
Stai usando questo nuova rom?
Grazie,
Click to expand...
Click to collapse
No, just trying to update my lasagna by hand, but it doesn't work.
To see the differences Ive extracted the two roms and made a binary compare between files..
PS: After removing these two dlls my animated splash worked again and my phone too...
Ciao
Is there also a new SEA version. I don't have a Dopod device so my P3600 EMEI does not allow a download.
claros said:
No, just trying to update my lasagna by hand, but it doesn't work.
To see the differences Ive extracted the two roms and made a binary compare between files..
PS: After removing these two dlls my animated splash worked again and my phone too...
Ciao
Click to expand...
Click to collapse
so is it working now? you made the update? Since I have the TIM version of the phone will this work? Thanks and btw, which two dll are those that need to be removed...
itlinux said:
so is it working now? you made the update? Since I have the TIM version of the phone will this work? Thanks and btw, which two dll are those that need to be removed...
Click to expand...
Click to collapse
No, i din't made the update and you don't need to remove any dll.
If you want you can install it, if your device id supercid. But probably you will not found any difference from the one you are using, apart from streaming media that i've never used...
Ciao e buonanotte, mi è passata la sbronza e vado a letto...
I cannot find a new SEA rom. They changed the ROM date in the website - D810 WM6 English Version Upgrade code (2007/07/10), but if you try to download it goes to the same file - D810_SEA_WM6_Upgrade_20070709 - released before.
Fixes TomTom bug and works on UK Orange SPV M700
Hi all,
Having installed this ROM last night, I just thought I would let you all know the following:-
1. It FIXES the TomTom bug/incompatability whereby the Device Code keeps changing each time you Hard Reset! For me, this is *the* MOST important fix.
2. It works perfectly on the UK Orange SPV M700 version of the Trinity. In fact, there is no need for SuperCID or any of that lark, just unlock the phone from Orange (using the sticky thread in the Trinity Upgrading forum) and away you go. My advice is to press the Reset button right at the end of the initial date/time/screen alignment setup to stop it installing the Extended ROM.
3. This is the ANZ (Aus/NZ) version of the ROM, but it IS WWE (World Wide English)
I've only been running it and using for a few hours, but currently, all seems good. Definitely worth trying I'd say.
Regards, Moz.
I've tried it several times now, but somehow can't get past the 28% mark.
Tried all the unlock tricks...
Somebody a suggestion ?
Vilem said:
I've tried it several times now, but somehow can't get past the 28% mark.
Tried all the unlock tricks...
Somebody a suggestion ?
Click to expand...
Click to collapse
First flash with this one..
http://rapidshare.com/files/42190781/D810_SEA_WM6_Upgrade_20070709.zip
tukan said:
First flash with this one..
http://rapidshare.com/files/42190781/D810_SEA_WM6_Upgrade_20070709.zip
Click to expand...
Click to collapse
What's the difference ?
Vilem said:
What's the difference ?
Click to expand...
Click to collapse
After this step you can flash the "NEW Dopod d810 WM6 ROM" without the 28% error.
I got several questions:
1. Can I also install it on a P3600 with German language (I know that it is in English then, but that´s better anyway)?
2. My Triny is not branded (bought from Amazon). This won´t be a problem?
3. Is it branded then, because it´s a Dopod Version?
4. Can I still install German programs like the German Tom Tom or Langenscheidt Dictionaries or do I need new versions for WM6 and/or the English BS?
5. Is a English PDA compatible with German Outlook
6. Is also Office Mobile, Acrobat etc. onboard?
7. Will I loose my guarantee?
8. Can I go back to the official German WM5 in case of Problems?
9. Can I use this Update straight from my Vista PC or do I also need to change some dll´s?
10. Are any functions like European 3G etc. disabled, when installing this Australian version?
11. When the update stucks at a certain %, can I still update the other rom to use this update later or do I have a problem then?
Please, forgive me that I post so many questions.
Thank you so much for your answers.
Ok i removed ipl and spl from this rom , changed spash screens and flashed with customRUU.
Working fine so far.
hi!
I'am a N00b of ppc (lol) ... but i'am looking for a wm 6.1 rom for the jama 101 ...
thanks
ps= sorry for my bad english
me too
me too need wm6.1 or higher for my i-mate jama101
The original rom is not even out yet. So any roms u will find wont be original and most propably cooked from other roms such as the i mate jama. I found one and when i installed it my phone went blank, nothing on the phone, only a white screen, and till now it cant be fixed. Dont try to look for any roms because the one u have is the best.
WARNING
100% I agree with you mr. Galiza 2days ago I bought a JAMA 101 and tried to update the virgin rom but 4 sorrow my GAMA 101 is dead right now because that updating and only white screen what I got from the ROM 6.1 I advice all who have a JAMA 101 to keep the virgin ROM and never try to update it. cuz you ll never back 2 the vigin again and you ll kill you device .
mr.Galiza if there any way to back my GAMA 101 2life plz tell me
thanx to all
sorry sir
I'm late and now my i-mate JAMA101 stuck in white screen
how can I fix this problem????thanx
imate jama 101 white screen
my i-mate JAMA101 stuck in white screen
how can I fix this problem?
Reply With Quote
niflas said:
my i-mate JAMA101 stuck in white screen
how can I fix this problem?
Reply With Quote
Click to expand...
Click to collapse
i need rom i have one phone only sho i mat
no rom is available for this poor device !
I search the net for hours and ... nothing !
I think we must Dump rom from our device and then cook it !
i-mate jama 101 rom problems
hey guys, i gues microsoft built in system in most of the pocked pc are uncorruptable. i am not sure if the builtin system of your pocket pc is corrupted or not. Here are some steps to update your device to the company built operating system.(note-system works only if builtin system is not corrupted)
1-remove battery
(note-betry should be charged,use master charger to charge if your pocked pc is not charging battery)
2-press and hold volume(-) button and red hangup button simultaneously,keep holding both keys and insert the battery.(note-dont unhold keys until the red led light on the top of the device is off)
3-tap decline on agreement statement(note-accept=arabic language instalment, decline=english language instalment)
After following these steps your pocket pc will as it was. for other manual instructions mail me to [email protected] .
sincerely k231.
Hi all,
i just tried an ROM update on my diamond and ended up with a probably burned diamond.
I tried to updated to "Unsigned-Hard-SPL-Diamond-OliNex" and then to Elite 2.0.
First the Hard-SPL updated didn't work an stoped at 1%.
As i figgured out i had to start the update tool as administrator under my Windows Vista.
The diamond now starts and shows the following screen:
1. A Water like Picture
2. The Text "Xda diamond" in the bottom left corner
3. The Text (in red characters)
R 1.00.25.03
G 52.26a.25.09
D 1.37.00.00
4. The Character "H" (in red) next to the "Xda diamond" Text
The Diamond stops here and does nothing.
I can get to the three colors screen by pressing Vol Down and Reset.
I also tried a hard reset which worked, but i ended up at the same screen and the diamond does nothing and just stops there.
Have i completely damaged my Diamond? (I hope not, would be a nightmare to me)
I will be very grateful for any kind of help on this!
Thanks in advance!
Did u have Flash Hard SPL before?
When u didnt, the Update stops @1% whit err msg like: Wrong vendor ID
Then u have to flash hard SPL before, is sticky in this Forum.
Try maybe with a ROM from here in the first Sticky post, then u can ask for support.
hope helped u
mastah
when you get the "three colour screen" then everything
should be ok, try to reflash the device!
Hi thanks for the quick answer!
I tried now to flash again to the Hard-SPL 1.30... but i get an Error 284 at 0%.
The three color screen shows the following:
DIAM300 MFG 64M
SPL-1.40.LiMex
MicroP-Diam (LED) v11
PSOC-Diam STAGE_PVI v0x30
Any ideas?
Any help welcome!
I am getting a wrack, my nerves are going crazy. I hope i can recover at least to some ROM now...
Flash hard-spl, set ur device in bootloader mode (tri-color screen. Search for it if u doesent know how)
And flash one of the compatible Roms, they are sticky in the forum.
Maybe urs spl isnt compatible whit the Rom u flashed.
When the Device boot's, and u see the red signs whit numbers, then i think its all ok...
...only incomplete rom.
greets, and good luck
http://forum.xda-developers.com/showthread.php?t=400411
CURRENT ROMS:
RUU_Diamond_hTC_Asia_HK_WWE_1.34.831.1_52.24.25.08 _0.93.25_Ship
RUU_Diamond_HTC_Europe_1.35.401.3_Radio_Signed_Dia mond_52.26.25.09_0.93.25.26_Ship
RUU_Diamond_hTC_Asia_WWE_1.37.707.1_Radio_Signed_D iamond_52.26a.25.09_1.00.25.03_Ship
RUU_Diamond_HTC_WWE-ME_1.37.456.2_Radio_Signed_Diamond_52.26a.25.09_1. 00.25.03_Ship
RUU_Diamond_HTC_SPA_1.37.412.2_Radio_Signed_Diamon d_52.26a.25.09_1.00.25.03_Ship
RUU_Diamond_HTC_Europe_1.37.401.3_Radio_Signed_Dia mond_52.26a.25.09_1.00.25.03_Ship
RUU_Diamond_HTC_NOR_1.37.409.3_Radio_Signed_Diamon d_52.26a.25.09_1.00.25.03_Ship
DIAM1.37.413.3SVE (REBUILT)
COOKED ROMS:
ALL BEPE ROMS ARE SIGNED AND ARE PART OF THE ELITE TEAM ROMs DIVISION, SEE INDIVIDUAL THREADS.
Elite 2.0
PDAVIET DIAMOND_1.37.08.01
tlr-diamond-1.08.06.20
tlr-diamond-2.08.07.01
DIAM.DAN.137.403.3-Cyphol
DIAM140 (EDGE Only Diamond):
indian_ship_rom
http://forum.xda-developers.com/showthread.php?t=400402
Hard-SPL or how I learned to stop worrying and love the MPU
If this not work try with spl dev-edition:
http://forum.xda-developers.com/showthread.php?t=400950
thanks for the suggestions.
i will try what you said and see what i can get.
thanks really much for your help this forum is amazing!
hope i can finally live again with my diamon which i already like so much...
thanks again!
ur welcome.
and another tip:
Try to flash on XP
at the momen seems easyer to flash from linux as from Vista
I can feel ur pain
thanks mashta,
i will try it on vista 32 first, since i do not have xp here
thanks again for all the help!
On Vista 64, I had to take the following steps to have it working:
Fisrt: connect the device in boot mode to the PC
Second: wait until Vista installs a driver update
Third: disconnect the device and restart the PC after the update is installed
Forth: right-click on the RUU executable, and choose
compatibility mode with Win XP SP2
Fifth: run the RUU, cross your fingers and start praying
As how to enter bootloader, press volume down and reset simultaneously
s1rl4ncel0t
Senior Member
mastah said:
ur welcome.
and another tip:
Try to flash on XP
at the momen seems easyer to flash from linux as from Vista
I can feel ur pain
Click to expand...
Click to collapse
I had no problem flashing to Unsigned Hard-SPL (1.4?) and bepe's bElite 0.54 Basic ROM using Windows Vista Business x64 (SP1).
It worked out of the box, without any special drivers installed whatsoever. I believe there were some drivers installed when I got it into bootloader mode, but aside from WMDC I didn't install any extra software
Milenco said:
I had no problem flashing to Unsigned Hard-SPL (1.4?) and bepe's bElite 0.54 Basic ROM using Windows Vista Business x64 (SP1).
Click to expand...
Click to collapse
Lucky boy, but many peoples has probs whit vista
and maybe it helps to try on a other os to find
whats the bug
and helpfull site:
http://www.modmydiamond.info/
sounds like a bad flash? i once had the same problem with HTC tytn2, and i managed to contact forumer GSLeon who helped me out. he said "after a bad flash,u should never keep attempting to flash again, because u may permanently brick your phone"
THANK GOOD IT WORKS AGIN!
And now the asnwer what was the problem:
A ****ing USB-HUB from MSI!
I had my diamond connected throu that USB hub and so everytime i tried to flash i had communication errors at 0% or 1%.
I connected the diamon directly to my pc and guess what:
It worked like a charm.
THANKS AGAIN TO ALL THE HELP FROM PEOPLE HERE!
This forum is realy amazing.
Thanks again very very much!
I am so happy to have my diamon back
And i will never buy a MSI USB HUB again...
A Happy Ending after all......
I bet your so releived and I bet you've learnt a lot too!
Blob8me said:
A Happy Ending after all......
I bet your so releived and I bet you've learnt a lot too!
Click to expand...
Click to collapse
Releived is not the right word, back to life fits more
Thanks again for all the help i have got here!
davidl said:
And i will never buy a MSI USB HUB again...
Click to expand...
Click to collapse
Just so that in a few weeks time when someone else searches and finds this thread.........
NEVER US ANY KIND OF HUB TO FLASH A PHONE, ALWAYS PLUG THE PHONE DIRECTLY INTO YOUR MOTHERBOARDS USB SOCKET
Oh and davidl you are one lucky son of a *****
people could read a bit more before trying to help - the guy obviously had the hardspl flashed because of the version that was reported in tricolour. (1.40.etc...though it was mistyped )
anyway good that it got resolved OK. using hubs is indeed not recommended.
welcome to the darkside of the diamond
hi guys
i'm just beginnin' and talkin' to you from my diamond an' my ****in' orange french default rom the 1.73.73.2
so for those who know that it was made by sons of *****es for their bros,
i was going crazy to about this problem but you guys are really marvelous an' think know that i have the answer to my problem.
but i'm a new bee as you can see and i'd like to know if i have to install anyway hard spl?
i just want to delete this ****in' rom...
excuz me for my english and one million thanks for that precious help
3 ... 2 ... 1... Ooooh he got banned!
pls expects help me with this problem.
i downloaded htc prophet pm300 rom.(ROMUpdateUtility_NV_G4)
i updraded it with the above software but after that the fone power on with this
the screen has been divided into four parts.
one is red with ipl 2.15.0001 written on it and also spl 2.15.0001 written on the red part.
second part is also green with nothing written on it.
third part is blue
and the last one is white.
that all.pls help me with different software to upgrade. or if there is any solution pls help me.
i also need the correct link to download the latest english rom.
thanks very much.