Related
Hi all,
Noob user here
I've a problem with my XDA IIs that I thought I'd get some advice on rather than dispensing of it. Basically...it won't switch on. When plugged into mains the red light comes on for a bit then goes off.
Phone was working perfectly, put it in my pocket got home and nothing, assumed it crashed but doesn't respond to anything. Has been sat on my wardrobe for over a year but could do with using it for sat nav.
Any advice on what to try? Could be the battrey but don't wanna fork out extra cash for a new one as it's even more money lost
If I wasn't to fix it, any idea on what it's worth? Screen is unmarked and it has all standard accessories with it.
Ta
Save you BA man! More or less it's the battery (I think). Or the internal battery is drained to 0%. Have you tried charging it first for a couple of minutes?
Yeah tried charging overnight. Charge light comes on for a bit then goes out. Does the same thing when connected via usb, red light comes on but it doesn't register on the pc.
Was working fine but then one day it just woudn't come on. Would like to keep it if I can, got a touch diamond too now, but this is actually a better phone to use!
try to use a different battery first. And let's see what happens next.
Yeah, I may have to but want to avoid as much extra cost as I can
Bit more info, using the docking station plugged into the mains:
Batt alone - Charge light on dock comes on.
BA alone - Red light on BA comes on.
BA with batt attached - no lights on.
Any ideas??
can you try to put it in bootloader mode?
red_hanks said:
can you try to put it in bootloader mode?
Click to expand...
Click to collapse
Don't know how to
Plus it doesn't actualls switch on or register on the PC, so can I do much to it?
It's just like what I did with my BA a few days ago, I am flashing it with a new ROM and while in the process I intentionally unplugged the cable during the process and I got an error on my PC and my BA does not turn on anymore. I tried to put it in bootloader mode a couple of times and it did and I re-flashed it again. And it works. Check the wiki...
red_hanks said:
try to use a different battery first. And let's see what happens next.
Click to expand...
Click to collapse
yeah, the best thing to do to isolate the problem..
Astecas said:
Yeah, I may have to but want to avoid as much extra cost as I can
Any ideas??
Click to expand...
Click to collapse
no need to buy at once, borrow first, then if your BA works using another's batt, thats the time you need to decide spending... cheers
The same problem I had!!!!!!!!!!
I had this trouble... and... YUP!!!!! is the backup battery.
So you cant charge your BA via USB if the main batt reaches less than 35% so keep it safely above 35% men...
BTW... if you have your batt less than 35% the OS can be runing just a little seconds so your batt is dying is not truth that it have 35% it has almost 5% trust me...
Yes!!!! the red led Turns On a little then Goes off... so sad isnt it?... now your backup batt is almost 0% thats why your red led appears... so...
Get a craddle USB-AC_Charging base it has a backtrace to charge apart the batt charge it individual. Once you get a full charged main batt, let your BA rest a little on the freezer to obtain a little power of the Backup batt... (YES ON THE FREEZER!!! ) at least 3 minutes before you plug the main batt.
It wakes up the device... maybe it becomes a few seconds on but... is enough.... if it starts... cradle your entire device on the craddle and wait till its full charged... again the green led appears cause the main is full but let it charge more and more... caus there is no led indicator for backup batt.
NOP!!!!!!! I dont do the freezer trick when i had this problem... cause i get it works faster than you...
Hope this works... post your adventure men....
Red Hanks/Que - Tried both those (ok, maybe not the freezer bit!), and stil no joy. Gonna go out over the weekend and see if a repair shop can try another battrey. Otherwise I may be saying goodbye :-(
Phezthie - The BA was rare when new, now they are non-existent. No chance of borrowing a friends.
Cheers for the help guys.
Well it is a nice idea!
you can make a modded battery for BA with two nokia bl 5c taiwan batts... check the post on winmo 6 subforum.
In my opinion. it's the internal battery since you didn't use the phone for over a year. Hope you can make your BA alive again because there's so much nice apps waiting out there...
I was using it daily before this though, it suddenly stopped working one day. It did however crash a few times before it finally went. I'll have a read up on changing internal batt. Red...I'm gonna try and save it!
Ok...keep us posted and good luck mate!
Astecas said:
Red Hanks/Que - Tried both those (ok, maybe not the freezer bit!), and stil no joy. Gonna go out over the weekend and see if a repair shop can try another battrey. Otherwise I may be saying goodbye :-(
Phezthie - The BA was rare when new, now they are non-existent. No chance of borrowing a friends.
Cheers for the help guys.
Click to expand...
Click to collapse
both batteries, main and backup, could be the reason thats why you need to determine which one of it by isolating the cause of the problem. to know if its the main battery, you can improvise by using different battery with same voltage rating (3.7volts, no need to worry as to the Ah rating), but be sure to connect the proper polarity to the BA's correct pin terminals, otherwise, power circuit of your BA will be compromised.
As to the backup battery, you can do nothing it but to replace if defective. the "freezer trick" is actually one of the shattering myths of electronics and cannot be relied upon to have an optimal performance, as it neither charge nor extend the life of the battery. it simply reduces the the power dissipation (power loss due to heat and resistance) during the initial boot so that it can draw enough power to run unit in its chargeable condition.
but since it is not prossible to borrow or no available battery can be used as a test unit, I suggest that you try the first procedure aforementioned, this of course, if you are familiar with battery polarities and know the corresponding terminals of the unit. regards
Hmmmm, my diamond has a 3.7v batt...never thought of that!
I'm near preston, with the origional battery . .
I'm near preston, with the origional battery . . fully charged, will last 6/12Hrs=using it, P.M. me ur postcode + House #, I will send it to you to try
(stick with the BA, new HTC Elf is half the PPC, that the BA is!!!!)
FleaBay'd a 2400mAh (incl shipping)=under £10GBP !!! (late last year)
#===#===# Currently Being Pimped (1st go!) #===#===#
Cheers mate, but I've just paid for one off ebay so I'll just wait for that to come now. If it doesn't do it I may be selling up...
Fingers crossed
Ok, new battrey arrived this morning. Gave it a charge and just tried it...
....no change
Screen, green and blue top corner and red end call lights momentarily flash when I press the power button. Then nothing.
Both batteries seem to charge in the cradle but not in the phone.
So, any other suggestions oh technically superior ones??
Btw, I received 2 batteries this morning, so I've listed the new one to get some cash back here:
http://forum.xda-developers.com/showthread.php?p=3519343#post3519343
EDIT: The problem was that the battery driver isn't the best. At 3.99V it switched to 99%. So the problem is fixed now!
Hi guys.
I have a problem wih my Artemis. After flashing the USPL and a M6.5 ROM it always shows the Battery to be 100% changed and doesn't want to charge it. But I'm sure it isn't 100%.
The ROM isn't the problem cause with the device fully of the same thing happens if trieing it.
I tried to flash the SPL back but I only get errors.
Any help would be cool
Thanks
ChrBeck said:
Hi guys.
I have a problem wih my Artemis. After flashing the USPL and a M6.5 ROM it always shows the Battery to be 100% changed and doesn't want to charge it. But I'm sure it isn't 100%.
The ROM isn't the problem cause with the device fully of the same thing happens if trieing it.
I tried to flash the SPL back but I only get errors.
Any help would be cool
Thanks
Click to expand...
Click to collapse
Hi,
Are you sure that isn't the ROM?
however you haven't tried to mount the original ROM?
bye,
Silvio
OK Answer: I'm sure. I tried 10 ROMs (7 cooked, the original, a HTC English original and HTC German Original). I tried 4 SPLs (Both USPLs (Pof, Cmonex) Original SPL and HTC WWE SPL). I tried 4 Radios too. I checked the Battery with a voltmeter several times and I got first 4.17V (seemd to be nearly full then) and second time I got 4.12 (sure it wasn't full anymore). Now I'm already running it in standby with GSM on for 6h and it still shows 100%. So I'm sure it isn't the ROM SPL or Radio.
Only things left are IPL or OEMSPL. Or maybe the Info recieved from the battery.
Thanks for your reply guy.
Any help would be nice.
then you tried to keep the pocket PC on for a day? to me the battery falls below 100% for 6 hours more or less ...
P.S. the battery is a 3.7V... 4.17-12V ...is full!
Bye,
Silvio
The battery is full at 4.2V as written on it. Compared to my Kaiser it sould only have 80% with 4.12V. And yea I'll leave it on till it goes off itself to know when the battery is empty. When it is empty I'm sure I can't carge anymore if it still thinks it is full but for that problem I have a 4.5V AC/DC adaptor to recharge the battery.
By the way which sence do the 3rd and 4th pin have? They don't have any voltage. Are they for the Vibration motor or do they transmit the charging state to the phone?
ChrBeck said:
The battery is full at 4.2V as written on it. Compared to my Kaiser it sould only have 80% with 4.12V. And yea I'll leave it on till it goes off itself to know when the battery is empty. When it is empty I'm sure I can't carge anymore if it still thinks it is full but for that problem I have a 4.5V AC/DC adaptor to recharge the battery.
By the way which sence do the 3rd and 4th pin have? They don't have any voltage. Are they for the Vibration motor or do they transmit the charging state to the phone?
Click to expand...
Click to collapse
I don't know it utility...
however happened to me and I resolved discharged, I do not know what else to do...
P.S. when my battery is fully charged 3.9V marks... sorry for my imperfect english
No problem. Maybe I have to connect + to - very short to get the Voltage down. But first I'll just let it lay there in standby with phone on and see how it goes. Then if it goes off I'm sure the battery is empty. then I can start bench the Charging with external system.
That won't solve the problem but then I'll have a benchmark.
Thanks for your infos and tips.
And your English is no problem to me.
not at all
let me know if it works
Bye
Yea I will.
Solution
GO TO REGISTRY
[HKEY_LOCAL_MACHINE\security\ResOver\Bitmaps]
AND REMOVE:
"BatteryIconIdStart"=dword:000003E9
"BatteryIconLevels"=dword:00000065
RESTART, DONE !!!
ChrBeck said:
EDIT: The problem was that the battery driver isn't the best. At 3.99V it switched to 99%. So the problem is fixed now!
Click to expand...
Click to collapse
Hi
if I may ask do you happen to have any better driver or how did you manage to fix your problem as i happen to have the same.
thanks in advance.
Didn't work. But anyway as I said in first post the problem is fixed. The battery has just a very bad voltage curve as i found out using a voltmeter while discharging.
edit:
@mjonase:
I just waited. It takes until the battery is unter 4V. Then it switched to 99%. The driver isn't the problem just the OEMSPL and the battery itself. Just switch on bluetooth and phone and keep the device on. After max 1h the battery level bar will change.
thanks @ChrBeck it seems i gut a different prob altogether mine seems to be a faulty h/w ,charges up and shows 100% if i remove it from the charger the battery drops quite quick, and when i reset it comes back with almost nothing left but when i charge the battery externally it can keep the charge for approx 2-2 1/2 days. so my artemis does false charge ups i guess.
Yea I think it doesn't charge right.
That is a different problem.
WM 6.5 Shady313 ROM (23081 R2)?
Hi,
can anyone tell me, where I can download the WM 6.5 - 23081 R2 version ? I wan't downgrade my version from the newest version 24623 to 23081 because the sms bug can't fix.
Thanks for your help!
This thread is over 2 years old and has NOTHING to do with your rom request. Stop reviving old threads and use the search function please.
This one is closed.
Hey guys I am really scared that my TP2 is bricked after I booted android and used it a while I connected it with my notebook usb cable and charged it. I had 51% at the beginning. After 10 minutes I had 67% and 5minutes later it reboots without doing anything! And since then it never starts again! When I press power button it does nothing! Only when connecting to a charger it boots up but only in bootloader mode and crashes after about 5-15 seconds!
Can someone pleeeeeeease help me?!?!?!
RobbyTouchHD said:
Hey guys I am really scared that my TP2 is bricked after I booted android and used it a while I connected it with my notebook usb cable and charged it. I had 51% at the beginning. After 10 minutes I had 67% and 5minutes later it reboots without doing anything! And since then it never starts again! When I press power button it does nothing! Only when connecting to a charger it boots up but only in bootloader mode and crashes after about 5-15 seconds!
Can someone pleeeeeeease help me?!?!?!
Click to expand...
Click to collapse
Have you plug it in to a wall, sounds like your battery its completly empty, happened to me the other they, it didnt have enough juice to boot up. plug it to a AC( wall plug) and see if that works.
devilcuban said:
Have you plug it in to a wall, sounds like your battery its completly empty, happened to me the other they, it didnt have enough juice to boot up. plug it to a AC( wall plug) and see if that works.
Click to expand...
Click to collapse
Ok I´m charging for about 30 minutes now but there nothing happens when I press the power button?!?
RobbyTouchHD said:
Ok I´m charging for about 30 minutes now but there nothing happens when I press the power button?!?
Click to expand...
Click to collapse
OH that's wierd, do you have any way of trying out another battery? just to see if is juts the battery that went dead and not the phone ?
devilcuban said:
OH that's wierd, do you have any way of trying out another battery? just to see if is juts the battery that went dead and not the phone ?
Click to expand...
Click to collapse
No badly not...I don´t know anybody who has a tp2 and the battery of my hd2 didn´t fit in of course
Is there any way to completely reset everything because it is always booting in bootloader when I connect with charger and then putting the battery in. When the battery is inside and I connect the charger nothing happens and when I put the power button there also happens nothing!
RobbyTouchHD said:
No badly not...I don´t know anybody who has a tp2 and the battery of my hd2 didn´t fit in of course
Is there any way to completely reset everything because it is always booting in bootloader when I connect with charger and then putting the battery in. When the battery is inside and I connect the charger nothing happens and when I put the power button there also happens nothing!
Click to expand...
Click to collapse
You could try the T-mobile store and see if they can let you test one out,
as for the reset you can try Hard reset by pressing POWER+SEND+END buttons then when the screen comes up hit VOLUME UP key.
But definetly try a new battery frist if you can.
Edit: Also when you charge it does the LED comes on?
devilcuban said:
You could try the T-mobile store and see if they can let you test one out,
as for the reset you can try Hard reset by pressing POWER+SEND+END buttons then when the screen comes up hit VOLUME UP key.
But definetly try a new battery frist if you can.
Edit: Also when you charge it does the LED comes on?
Click to expand...
Click to collapse
And there is another thing...in the middle of all the text of the bootloader is standing Rom3 Error...is that normal? Never looked on this text before
RobbyTouchHD said:
And there is another thing...in the middle of all the text of the bootloader is standing Rom3 Error...is that normal? Never looked on this text before
Click to expand...
Click to collapse
That is wierd, no i dont think its standard. could you take a pic of your Bootloader and post it ?
devilcuban said:
That is wierd, no i dont think its standard. could you take a pic of your Bootloader and post it ?
Click to expand...
Click to collapse
Here it is...
RobbyTouchHD said:
Here it is...
Click to expand...
Click to collapse
Well i think we can assume its not your battery, .
Do you have the original Rom, that you can flash to it ?
Why does it say Rhod100? Isnt the T-Mobile Tp2 Rhod210?
King Royalty said:
Why does it say Rhod100? Isnt the T-Mobile Tp2 Rhod210?
Click to expand...
Click to collapse
Rhod100 is the UK version
devilcuban said:
Well i think we can assume its not your battery, .
Do you have the original Rom, that you can flash to it ?
Click to expand...
Click to collapse
No I haven´t...
The good thin is that I was able to load the normal SPL as you can see (no OLINEX) but I haven´t found the original rom for it! Is there a thread here where all the download links are?
King Royalty said:
Why does it say Rhod100? Isnt the T-Mobile Tp2 Rhod210?
Click to expand...
Click to collapse
Where can I download the Rhod210 restore.nbh SPL? I found it nowhere!
RobbyTouchHD said:
No I haven´t...
The good thin is that I was able to load the normal SPL as you can see (no OLINEX) but I haven´t found the original rom for it! Is there a thread here where all the download links are?
Click to expand...
Click to collapse
Yes i saw that so i should load a rom fine.
you could try HTC site
http://www.htc.com/uk/supportdownloadlist.aspx?p_id=250&act=sd&cat=2
or maybe the T-mobile site over there might have it?
RobbyTouchHD said:
Where can I download the Rhod210 restore.nbh SPL? I found it nowhere!
Click to expand...
Click to collapse
the Rhod210 is the US version of it, donno if the you can use that one. if anything you could HArd-SPL again and do a custom rom.
devilcuban said:
Yes i saw that so i should load a rom fine.
you could try HTC site
http://www.htc.com/uk/supportdownloadlist.aspx?p_id=250&act=sd&cat=2
or maybe the T-mobile site over there might have it?
the Rhod210 is the US version of it, donno if the you can use that one. if anything you could HArd-SPL again and do a custom rom.
Click to expand...
Click to collapse
No i can´t HSPL again because it stays at 0%...already tryed that
But what could this error be???
RobbyTouchHD said:
No i can´t HSPL again because it stays at 0%...already tryed that
But what could this error be???
Click to expand...
Click to collapse
Oh, that blows. im trying to read the error but its kind of difficult, if anything you could try to post in the Wimo ROm development section or General, they might have a better inside of the error.
Edit. i think the error says
"Upgrade ROM code error
Please try again "
try this and see if it works.
1. Download orginal rom from HTC.com
2. Remove HTC Battery
3. Remove SD-Card
3. Connect the Phone to USB-Computer
4. Start-up the phone in the Tree-color screen
5. If everything is right, in the bottom you will see USB
6. Start-up the update on your computer (rom you've downloaded from htc.com)
7. Run the Update
8. Your phone will boot after it succesfull install
9. Place the battery and SD-Cart back in the Phone
I have the exact same problem from running Haret while plugged into AC power thinking it was charging, but obviously it wasn't. Never trust the battery meter in the Android ports. They are so far out it's just dangerous if this is the result of a dead battery whilst running it in my opinion.
My problem is identical to yours, even the error code on the bootloader. I can get it charged to a point where the bootloader will stay on for a maximum of about 8 seconds, but I can't get any more charge into it than that.
What you need to do (I hope) is to charge your battery in some other way. I have bought a battery charger from eBay HERE (still waiting for it at the moment), or if possible, you could get hold of another battery that is already charged, another TP2 to charge your battery, or a desktop cradle that has a second battery charging port. I'm pretty confident that it if I can charge the battery I can reflash and all will be OK. Doesn't have to be a stock rom, as long as you can get a "good" flash.
The phone won't charge the battery in bootloader, and you can't get into anything other than bootloader for a few seconds, right? I started a thread in the General section HERE and got some promising replies. It's what I expected anyway. No charge in the battery = unable to boot or reflash. I believe it is a direct result of running Android with low battery, so I won't be doing that again any time soon!
Nothing else that anyone else has suggested above will work. Obviously, it goes without saying that I am grateful for the suggestions, but I've tried it all. It is impossible to reflash due to the bootloader-reset-bootloader loop, impossible to hard reset, or turn off to charge when the phone is off, or anything else until there is more charge in the battery. Hope this helps. I will post an update on my thread when I have the charger and let you know if it has worked. I'm about 90% sure it will though.
Makes seense if battery didnt have enough juice while he did a hard reset/flash it would of couse that error.
Good Luck! let us know if that battery charger you got fix the problem.
matmaneyre said:
I have the exact same problem from running Haret while plugged into AC power thinking it was charging, but obviously it wasn't. Never trust the battery meter in the Android ports. They are so far out it's just dangerous if this is the result of a dead battery whilst running it in my opinion.
My problem is identical to yours, even the error code on the bootloader. I can get it charged to a point where the bootloader will stay on for a maximum of about 8 seconds, but I can't get any more charge into it than that.
What you need to do (I hope) is to charge your battery in some other way. I have bought a battery charger from eBay HERE (still waiting for it at the moment), or if possible, you could get hold of another battery that is already charged, another TP2 to charge your battery, or a desktop cradle that has a second battery charging port. I'm pretty confident that it if I can charge the battery I can reflash and all will be OK. Doesn't have to be a stock rom, as long as you can get a "good" flash.
The phone won't charge the battery in bootloader, and you can't get into anything other than bootloader for a few seconds, right? I started a thread in the General section HERE and got some promising replies. It's what I expected anyway. No charge in the battery = unable to boot or reflash. I believe it is a direct result of running Android with low battery, so I won't be doing that again any time soon!
Nothing else that anyone else has suggested above will work. Obviously, it goes without saying that I am grateful for the suggestions, but I've tried it all. It is impossible to reflash due to the bootloader-reset-bootloader loop, impossible to hard reset, or turn off to charge when the phone is off, or anything else until there is more charge in the battery. Hope this helps. I will post an update on my thread when I have the charger and let you know if it has worked. I'm about 90% sure it will though.
Click to expand...
Click to collapse
I also ordered a charger now maby it´ll come tomorrow...I hope that it will work after charging outside the phone.
I´ll report here when it works!
Cheers
Battery charge indicator 2.3.5 upgrade problem
Hello everyone.This is my first time come to xda-developers form.I'm from china.
Yesterday I update my wildfire S(China mainland Edition)to 2.3.5+Sense3.0 lockscreen(Taiwan Edition)'s ROM.
I charge my bbttery yesterday evening.I turn off my phone.
When charge compalate.I found that the LED light didn't change green.It was still orange.
Why?How to solve it?
PS:Maybe my post have some Grammar problem。I hope that you can Bear with it.
Try factory reset see if it helps.
Backup important information and personal stuff first.
Just try the procedure of taking the battery out, sim card, micro sd etc etc and see if that works...
are you using the stock battery?
i used to notice with my (so called) extended battery 2430mah Gold battery, the software would say it was 100% charge, but it stayed orange for around another hour or two, then eventually turned green...i assume this is because the phone software had misjudged the charge level...so although it THOUGHT it was 100% full, it was actually still charging?
so if you have changed the battery at all, leave it charging for a bit longer (only an hour or so) and see if it goes out?
should be safe, as the batteries themselves usually have an auto shut off safety to stop them from being over-charged.
I get the exact same on ALL custom ROMs, never on Stock though, would love a fix!
Ko_Ka said:
I get the exact same on ALL custom ROMs, never on Stock though, would love a fix!
Click to expand...
Click to collapse
Since I unlocked my phone's bootloader, rooted and installed custom recovery I have the same problem too.
If I charge the battery with the phone turned on, the led turns green at 100% and everything is fine.
If I charge the battery with the phone off, the led stays orange forever even when I disconnect the charger. Then I have to remove the battery and insert it again so that the led turns off. If I wait enough time charging the battery reaches 100%.
This is a strange sympton that only started with the rooting/recovery flashing process.
Oh and BTW the way, I use stock battery but now I'm waiting for the arrival of two batteries I ordered on eBay.
One is a Li-Ion 1500 mAh and the other a Li-Polymer 2430 mAh.
Will see if the same happens when they arrive but I'm almost 100% sure this has something to do with the bootloader unlocking process.
Does anybody know how to fix this? I would really appreciate it.
Gloris said:
are you using the stock battery?
i used to notice with my (so called) extended battery 2430mah Gold battery, the software would say it was 100% charge, but it stayed orange for around another hour or two, then eventually turned green...i assume this is because the phone software had misjudged the charge level...so although it THOUGHT it was 100% full, it was actually still charging?
so if you have changed the battery at all, leave it charging for a bit longer (only an hour or so) and see if it goes out?
should be safe, as the batteries themselves usually have an auto shut off safety to stop them from being over-charged.
Click to expand...
Click to collapse
I for example left my phone charging for 8 hours (during the night) beyond the normal charge time. And the worst is that I have to remove the battery in order to turn off the orange led and be able to turn on my phone...
miguelca said:
I for example left my phone charging for 8 hours (during the night) beyond the normal charge time. And the worst is that I have to remove the battery in order to turn off the orange led and be able to turn on my phone...
Click to expand...
Click to collapse
happens to me too ... and i see we don't use same rom ... noone knows ?
Hi
have you try to wipe battery stats in recovery mode?
perhaps this will help, although I had not previously encountered a similar problem
freem4n said:
Hi
have you try to wipe battery stats in recovery mode?
perhaps this will help, although I had not previously encountered a similar problem
Click to expand...
Click to collapse
I've tried wiping battery stats in recovery mode and also with Nema Battery Calibration. Nothing fixes this annoying bug.
miguelca said:
I've tried wiping battery stats in recovery mode and also with Nema Battery Calibration. Nothing fixes this annoying bug.
Click to expand...
Click to collapse
Same as, pain in the arse!
Great news! At least on my phone this problem is gone.
You wonder how? Simply by updating recovery to v5.0.2.8 from ROM Manager.
I almost didn't notice it it but a few hours ago I plugged my phone to the charger while still on. After finishing my work I turned it off (no fastboot).
In the meanwhile I needed to use my phone far from the wall plug and disconnected the usb charger cable.
My gesture was to immediately remove back cover to remove the battery but fortunately I noticed the orange led went off.
So I decided to plug it again and wait for the charge to complete and for the green led. It did!
So run to the Market, download ROM Manager and let it update your recovery to the latest version.
I hope this annoying pest won't bother you no more.
Sent from my HTC Wildfire S A510e using xda premium
Well done MiguelCA
That sorted it out alright, now, thats all my little annoying bugs sorted!
Ko_Ka said:
Well done MiguelCA
That sorted it out alright, now, thats all my little annoying bugs sorted!
Click to expand...
Click to collapse
Great to hear that I could help.
miguelca said:
Great news! At least on my phone this problem is gone.
You wonder how? Simply by updating recovery to v5.0.2.8 from ROM Manager.
I almost didn't notice it it but a few hours ago I plugged my phone to the charger while still on. After finishing my work I turned it off (no fastboot).
In the meanwhile I needed to use my phone far from the wall plug and disconnected the usb charger cable.
My gesture was to immediately remove back cover to remove the battery but fortunately I noticed the orange led went off.
So I decided to plug it again and wait for the charge to complete and for the green led. It did!
So run to the Market, download ROM Manager and let it update your recovery to the latest version.
I hope this annoying pest won't bother you no more.
Sent from my HTC Wildfire S A510e using xda premium
Click to expand...
Click to collapse
thanks, i will definitely try this, ive been having a hard time looking on ways how to solve this problem.. also can i now do battery calibration steps after that?
cause im having battery drain issue on my WFS after flashing of ROM, im not getting 4.219V my only maximum was 4.196V. And yesterday i tried charging my phone in OFF state for 7.5hours and when i open it 100% at 4.077V, and now 87% just after 15mins of use..
jerdict said:
thanks, i will definitely try this, ive been having a hard time looking on ways how to solve this problem.. also can i now do battery calibration steps after that?
cause im having battery drain issue on my WFS after flashing of ROM, im not getting 4.219V my only maximum was 4.196V. And yesterday i tried charging my phone in OFF state for 7.5hours and when i open it 100% at 4.077V, and now 87% just after 15mins of use..
Click to expand...
Click to collapse
also try the battery saving tips from my signature links
b02 said:
also try the battery saving tips from my signature links
Click to expand...
Click to collapse
thanks, il try your tips after i succeed in battery calibration.
miguelca said:
Great news! At least on my phone this problem is gone.
You wonder how? Simply by updating recovery to v5.0.2.8 from ROM Manager.
I almost didn't notice it it but a few hours ago I plugged my phone to the charger while still on. After finishing my work I turned it off (no fastboot).
In the meanwhile I needed to use my phone far from the wall plug and disconnected the usb charger cable.
My gesture was to immediately remove back cover to remove the battery but fortunately I noticed the orange led went off.
So I decided to plug it again and wait for the charge to complete and for the green led. It did!
So run to the Market, download ROM Manager and let it update your recovery to the latest version.
I hope this annoying pest won't bother you no more.
Sent from my HTC Wildfire S A510e using xda premium
Click to expand...
Click to collapse
sorted it out alright,was using a universal charger for a replacement night hour charging ....thought this is just because of the overclocking.
First of all reset the phone . Am sure that will help.
john1fernandez said:
First of all reset the phone . Am sure that will help.
Click to expand...
Click to collapse
Not what the problem was or related to, it was an outdated ROM manager app that caused it...
Hi
So recently my OP3 fell, in the beginning everything was fine, but then i noticed that my device won't charge. I get the charging message for a few seconds then it disappears and my battery level is always at 50%. So now i have it connected to a Power Bank and it works just fine if i disconnected it about 5min lated it will just Shut Down. While Off if i try to charge my device first 5 seconds i get charging message and the battery animation with 50% displayed then i get an error message "Device temperature too low. Cannot charge".
Oh and when i connected my device to my PC as file transfer everything is fine, so i dont think its the port.
I left my OP3 once turned off for 3 hours with the dash charge and it lasted for about 30-40min without the power bank so it clearly is charging.
Any thoughts on why is that happening, or why my OP3 doesn't allow me to charge the battery?
Thanks in advance.
cgprince06 said:
Hi
So recently my OP3 fell, in the beginning everything was fine, but then i noticed that my device won't charge. I get the charging message for a few seconds then it disappears and my battery level is always at 50%. So now i have it connected to a Power Bank and it works just fine if i disconnected it about 5min lated it will just Shut Down. While Off if i try to charge my device first 5 seconds i get charging message and the battery animation with 50% displayed then i get an error message "Device temperature too low. Cannot charge".
Oh and when i connected my device to my PC as file transfer everything is fine, so i dont think its the port.
I left my OP3 once turned off for 3 hours with the dash charge and it lasted for about 30-40min without the power bank so it clearly is charging.
Any thoughts on why is that happening, or why my OP3 doesn't allow me to charge the battery?
Thanks in advance.
Click to expand...
Click to collapse
Try with 0% of battery
Sent from my ONEPLUS3
HIshan Pavidu said:
Try with 0% of battery
Click to expand...
Click to collapse
Hi thanks for the reply, thats the thing my OP3 dies out of battery so the battery is at 0% but my device displays always 50%. Even now i have it connected with the power bank, if i remove it after a minute or so it will die.
cgprince06 said:
Hi thanks for the reply, thats the thing my OP3 dies out of battery so the battery is at 0% but my device displays always 50%. Even now i have it connected with the power bank, if i remove it after a minute or so it will die.
Click to expand...
Click to collapse
Try to calibrate battery in that minute with battery calibrate app
Sent from my ONEPLUS3
HIshan Pavidu said:
Try to calibrate battery in that minute with battery calibrate app
Click to expand...
Click to collapse
Just did, and its still the same. Took some pictures if you wanna have a look.
Image 1. Battery to low. My guess is its close to 0%
Image 2. Conect phone to power bank and its charging, you can even see it in the light indicator.
Image 3. I get the "Device temperature too low" error, at which point i can turn in my device.
cgprince06 said:
Just did, and its still the same. Took some pictures if you wanna have a look.
Image 1. Battery to low. My guess is its close to 0%
Image 2. Conect phone to power bank and its charging, you can even see it in the light indicator.
Image 3. I get the "Device temperature too low" error, at which point i can turn in my device.
Click to expand...
Click to collapse
This is the first time i heard about this maybe you try to chat with oneplus
Sent from my ONEPLUS3
HIshan Pavidu said:
This is the first time i heard about this maybe you try to chat with oneplus
Click to expand...
Click to collapse
Already did, all the said was reset your device.
Im just trying to figure it out.. is it a hardware or software thing.
Thanks anyways
cgprince06 said:
Already did, all the said was reset your device.
Im just trying to figure it out.. is it a hardware or software thing.
Thanks anyways
Click to expand...
Click to collapse
Maybe its software did u try to flash stock rom via pc
Sent from my ONEPLUS3
HIshan Pavidu said:
Maybe its software did u try to flash stock rom via pc
Click to expand...
Click to collapse
Oh sorry forgot to mention, i am on stock rom i only had the device for 10days and didnt had the time to root it.
I would try to root it now, but im afraid that the device might shut half way and ill brick it.
cgprince06 said:
Oh sorry forgot to mention, i am on stock rom i only had the device for 10days and didnt had the time to root it.
I would try to root it now, but im afraid that the device might shut half way and ill brick it.
Click to expand...
Click to collapse
No need root to flash stock rom go to this link http://downloads.oneplus.net/oneplus-3/oneplus_3_oxygenos_3.2.1/ and follow the instruction
Good luck
Sent from my ONEPLUS3
Perhaps a different thing, but the BlackBerry playbook had an issue where people had to 'stack charge' until it reached a certain point.
Stack charging involves charging for 5s, then switching off at the source, and repeating this for several instances (eg 30 or 50). The idea being that it keeps kicking the battery module to work until it reaches either a voltage or perhaps a temperature that it then works properly again.
Could be worth trying.
Sent from my ONEPLUS A3003 using XDA-Developers mobile app
@cgprince06
Get a replacement ASAP
Regards.
Prince Chandela said:
@cgprince06
Get a replacement ASAP
Regards.
Click to expand...
Click to collapse
Cant really do that the device fell from quit the height, it was an accident... I dont think OnePlus will replace it.
On the other hand thanks god i did the 12 months insurance, filling the forms now,l. Hopefully it wont take long to get fixed.
Thanks tho
kboya said:
Perhaps a different thing, but the BlackBerry playbook had an issue where people had to 'stack charge' until it reached a certain point.
Stack charging involves charging for 5s, then switching off at the source, and repeating this for several instances (eg 30 or 50). The idea being that it keeps kicking the battery module to work until it reaches either a voltage or perhaps a temperature that it then works properly again.
Could be worth trying.
Click to expand...
Click to collapse
It sounds like doing a CPR to the battery
I have already made a claim with the insurance, and wouldn't wanna mess with it now.
Its weird tho that this happend, its clearly is charging till the point where i can switch the device on and it stops, this makes me think thats its an software issue.
sounds like a broken sensor, hope your insurance will replace the phone for you m8
cgprince06 said:
It sounds like doing a CPR to the battery
I have already made a claim with the insurance, and wouldn't wanna mess with it now.
Its weird tho that this happend, its clearly is charging till the point where i can switch the device on and it stops, this makes me think thats its an software issue.
Click to expand...
Click to collapse
IMHO as it also plays up whilst switched off its almost definitely a hardware issue, also the fact it's occured after a drop.
ghostofcain said:
IMHO as it also plays up whilst switched off its almost definitely a hardware issue, also the fact it's occured after a drop.
Click to expand...
Click to collapse
It could be anything really, i just found it really weird that my OP3 doesn't allow me to charge the battery because the temperature is low.... Thats the first time i see something like that... Well i already made the claim from the insurance, just waiting to hear back from them.
I got the same problem. I'll reset my phone and hope this will work. **** this ****....
Mulayan said:
I got the same problem. I'll reset my phone and hope this will work. **** this ****....
Click to expand...
Click to collapse
Hey sorry to hear here about it, i tried everything but couldn't fix it and in the end i sent my device to the Insurance company and they fixed it for me :/
Same
This just happened to me as well. I noticed my battery level was at 100% all day, and after a reset, 50%. Then my phone died around dinner, and when I plugged it in it instantly read as being 100% charged until it gave the "Device Temperature Too Low" message. I left it alone for the night, tried again in the morning and then it wouldn't even display a message at all (battery was completely drained I guess).
Anyway, had to get an RMA from OnePlus 3 and sent it in. This is the second time, though the first was my fault (dropped my phone and shattered the screen). I realized I did drop it prior to these issues, but it was from about a foot off the ground, and it was in its case. Doubt that could have done it but that does seem like a common theme here.
So I guess if you're reading this cause you googled "OnePlus 3 Device Temperature Too Low": open a ticket with OnePlus.