Related
Hi every gurus and chefs,
Thanks to creators of kitchens and tools, i have had so much fun in cooking my own rom. Thank you so much.
Recently, i tried to convert the 1.93.456.2 WWE ROM to CHS. I have managed to transform 99% of the ROM into CHS. but there is only one problem. When creating the rom using the diamond kitchen or kaiser kitchen, at the ending part, it will fall back to use os.nb within the ROM\ folder.
From my understanding, the OS.NB file is an extracted OS from the original WWE ROM thus, the boot.hv, boot.rgu and wince.nls is still the WWE version. how do I replace these files?
Another question would be, when dumping the official rom, the dump_XIP folder is created. what is the use of this folder? if i make changes to the folder, how to i merge them into a usable part for cooking?
i have did a lot of reading on XIP porting, big storage rom cooking and etc. i just can't seems to locate one which explains how to replace files in os.nb or merging the XIP folder to usable part.
Can any kind soul please kindly advise?
Thanks you so much!
You may want to have a look at ababrekars SYS and XIP porting guide in Elf section....
ruffruff said:
Hi every gurus and chefs,
Thanks to creators of kitchens and tools, i have had so much fun in cooking my own rom. Thank you so much.
Recently, i tried to convert the 1.93.456.2 WWE ROM to CHS. I have managed to transform 99% of the ROM into CHS. but there is only one problem. When creating the rom using the diamond kitchen or kaiser kitchen, at the ending part, it will fall back to use os.nb within the ROM\ folder.
From my understanding, the OS.NB file is an extracted OS from the original WWE ROM thus, the boot.hv, boot.rgu and wince.nls is still the WWE version. how do I replace these files?
Another question would be, when dumping the official rom, the dump_XIP folder is created. what is the use of this folder? if i make changes to the folder, how to i merge them into a usable part for cooking?
i have did a lot of reading on XIP porting, big storage rom cooking and etc. i just can't seems to locate one which explains how to replace files in os.nb or merging the XIP folder to usable part.
Can any kind soul please kindly advise?
Thanks you so much!
Click to expand...
Click to collapse
Hi,
1. You don't have to replace/port XIP from the ROM of the same device. Only do this if you want to port other devices' ROMs such as Kaiser to Hermes, Diamond to Kaiser, Raphael to Diamond etc. It will boot.
2. Just replace the wince.nls version in the SYS\WINCENLS_WWE with the CHS one you have.
3. Modify all the MUI files and registry as to point to your Language of choice.
4. The OS.NB is needed as the shell/container for your new cooked ROM because it's the requirement for using the Tadzio's tools. So, leave it as is.
5. Cook the ROM.
At least that what I did when doing my Hermes version long before.
Cyphol.
ruffruff said:
Hi every gurus and chefs,
Thanks to creators of kitchens and tools, i have had so much fun in cooking my own rom. Thank you so much.
Recently, i tried to convert the 1.93.456.2 WWE ROM to CHS. I have managed to transform 99% of the ROM into CHS. but there is only one problem. When creating the rom using the diamond kitchen or kaiser kitchen, at the ending part, it will fall back to use os.nb within the ROM\ folder.
From my understanding, the OS.NB file is an extracted OS from the original WWE ROM thus, the boot.hv, boot.rgu and wince.nls is still the WWE version. how do I replace these files?
Another question would be, when dumping the official rom, the dump_XIP folder is created. what is the use of this folder? if i make changes to the folder, how to i merge them into a usable part for cooking?
i have did a lot of reading on XIP porting, big storage rom cooking and etc. i just can't seems to locate one which explains how to replace files in os.nb or merging the XIP folder to usable part.
Can any kind soul please kindly advise?
Thanks you so much!
Click to expand...
Click to collapse
please correct me if i was wrong..
afaik, XIP part is the same for every language,
also in the end part of the building, you need os.nb only as a "template" to rebuild the new one... it wasn't really use the content inside...
normally, you need to copy all content in the dump_xip to the ROM\XIP directory...
to learn about the process of diamond kitchen (which is based on kaiser kitchen so i assume the tools are the same), i think you better use the kaiser ROM, and try to dump it.. and see what directories and files are generated...
in kaiser kitchen, to rebuild the rom you need 3 dirs, OEM, SYS, and ROM\XIP
cyphol said:
Hi,
1. You don't have to replace/port XIP from the ROM of the same device. Only do this if you want to port other devices' ROMs such as Kaiser to Hermes, Diamond to Kaiser, Raphael to Diamond etc. It will boot.
Click to expand...
Click to collapse
He would need to if he wants a different OS build. Or am I wrong?
pkoper said:
He would need to if he wants a different OS build. Or am I wrong?
Click to expand...
Click to collapse
of course....
pkoper said:
He would need to if he wants a different OS build. Or am I wrong?
Click to expand...
Click to collapse
Yes, that's right for the reason. If that's the only reason, why don't you replace the core.dll
thank you everyone for your advise.
looks like i just need more reading.
thank you cyphol, pkoper and teamee for your kind advice.
I have replace the SYS\wincenls_WWE folder with SYS\WINCENLS_0804. i believe this might be one of the problems. i will try replacing just the wince.nls within the folder instead of replacing the entire folder.
files which i have modified includes the boot.hv, user.hv, default.hv, boot.rgu, a bunch of other rgu as well. i might have missed out a few others. so i will check again.
thanks everyone for your kind advice. if there is any other suggestions or points to take note of, please kindly let me know.
your guys rocks! XDA rocks!
Hi all, i have complety translated, .rgu / .dsm / .bmp / dpi 96 to 192 / 0409 to 0406.
from 20924.
But, when i cook it, and flash my phone, it dosen't book. I can see the version, but i can't not come to wm6 startscreen.
Do some1 know what it could be ?
Could some1 please look at my files maybe :/?
http://rapidshare.com/files/161467646/sys.rar
Bump, no one want to look in it and help me ??
Search for and download a tool called G'reloc.
A common issue with ported OS builds is that they fail to boot due to improperly coded/placed files. G'reloc will fix this for you. Just run it right before cooking, and then once compiled and flashed, your ROM should boot fine.
*You will need to find the correct codes for G'reloc and a Diamond ROM. I have only used this tool on the Kaiser, so I cannot tell you what they are.
NotATreoFan said:
Search for and download a tool called G'reloc.
A common issue with ported OS builds is that they fail to boot due to improperly coded/placed files. G'reloc will fix this for you. Just run it right before cooking, and then once compiled and flashed, your ROM should boot fine.
*You will need to find the correct codes for G'reloc and a Diamond ROM. I have only used this tool on the Kaiser, so I cannot tell you what they are.
Click to expand...
Click to collapse
As I can see, my package builder+buildos run it before it is done.
But anyway, could allways try it ), what shall i put in ? Some1 knows it ?
danny_and_2 said:
As I can see, my package builder+buildos run it before it is done.
But anyway, could allways try it ), what shall i put in ? Some1 knows it ?
Click to expand...
Click to collapse
I tried using a newer BuildOS for the Kaiser that included G'reloc, and it never worked properly. I would run G'reloc on it's own, and then uncheck the box to run it as part of BuildOS.
If those values are auto filled in for you, then give it a shot with them. Worst case, the phone still doesn't boot.
NotATreoFan said:
I tried using a newer BuildOS for the Kaiser that included G'reloc, and it never worked properly. I would run G'reloc on it's own, and then uncheck the box to run it as part of BuildOS.
If those values are auto filled in for you, then give it a shot with them. Worst case, the phone still doesn't boot.
Click to expand...
Click to collapse
Yes they just came automatic, so. Yes i will try that one, will report back if it dosen't
--- Edit ---
I couldn't i get an I/O error 105. ? Some1 knows what this it ?
--
Run-time error 105: File not open for output.
This error occurs if you try to use standard input and output functions
like Readln and Writeln without the Uses WinCRT; statement.
To correct this error, add Uses WinCRT; to your program.
How exactly did you translate the 96.DPI files?
Safe yourself the headaches and use the Diamond 1.96 as a base.
That would give you all the SYS 192 dpi files you need.
Are you making the ROM true 0406?
Or just translating or renaming the 0409.mui files?
Noonski said:
How exactly did you translate the 96.DPI files?
Click to expand...
Click to collapse
I have copyed the files from the diamond (192) to it.
Noonski said:
Safe yourself the headaches and use the Diamond 1.96 as a base.
That would give you all the SYS 192 dpi files you need.
Click to expand...
Click to collapse
I also would, but it ain't released on danish
Noonski said:
Are you making the ROM true 0406?
Or just translating or renaming the 0409.mui files?
Click to expand...
Click to collapse
I have copied the danish 0406.mui files, and changed it in every .rgu and .dsm file.
Bump, bump, bump.
Must be some1 out there, there can help me find my mistake ;/
danny_and_2 said:
Must be some1 out there, there can help me find my mistake ;/
Click to expand...
Click to collapse
HI
For port this os build i've made this:
first try to port only the xip
Delete folder from your old working kitchen:
MSXIPKernel
MSXIPKernelLTK
AND OEMXIPKernel if exist
Delete your old OS.NB in ROM folder of your kitchen
Now you need to Extract OS.NB From a diamond ROM 20924 protected or not !
(My rom for exemple)
take the 20924 OS.NB in your ROM folder
then just cook with your old sys and oem folder without the folder mentioned on top. flash & verify xip version.
if this work ,change your sys with the 20924 you have
but keep some files from your old working sys
if i have a good memory i've keep this:
.ROM folder
.VM folder
.Metadata folder
.hd.dll folder
.osaxst0.dll folder
.gwes.exe folder
possible some other files...
if you have Greloc error replace files mentioned in error
try this.
ask if you need help
xboxmod said:
HI
For port this os build i've made this:
first try to port only the xip
Delete folder from your old working kitchen:
MSXIPKernel
MSXIPKernelLTK
AND OEMXIPKernel if exist
Delete your old OS.NB in ROM folder of your kitchen
Now you need to Extract OS.NB From a diamond ROM 20924 protected or not !
(My rom for exemple)
take the 20924 OS.NB in your ROM folder
then just cook with your old sys and oem folder without the folder mentioned on top. flash & verify xip version.
if this work ,change your sys with the 20924 you have
but keep some files from your old working sys
if i have a good memory i've keep this:
.ROM folder
.VM folder
.Metadata folder
.hd.dll folder
.osaxst0.dll folder
.gwes.exe folder
possible some other files...
if you have Greloc error replace files mentioned in error
try this.
ask if you need help
Click to expand...
Click to collapse
Hi there.
Thanks for you guide, I'll try it right away.
And I will say if I run into a problem.
xboxmod said:
HI
For port this os build i've made this:
first try to port only the xip
Delete folder from your old working kitchen:
MSXIPKernel
MSXIPKernelLTK
AND OEMXIPKernel if exist
Click to expand...
Click to collapse
They aren't in my kitchen with this rom. Don't know why.
xboxmod said:
Delete your old OS.NB in ROM folder of your kitchen
Now you need to Extract OS.NB From a diamond ROM 20924 protected or not !
(My rom for exemple)
take the 20924 OS.NB in your ROM folder
then just cook with your old sys and oem folder without the folder mentioned on top. flash & verify xip version.
Click to expand...
Click to collapse
It boot, and it works. Haven't looked so much on the rom, just verify'ed the xip version.
xboxmod said:
if this work ,change your sys with the 20924 you have
but keep some files from your old working sys
if i have a good memory i've keep this:
.ROM folder
.VM folder
.Metadata folder
.hd.dll folder
.osaxst0.dll folder
.gwes.exe folder
possible some other files...
Click to expand...
Click to collapse
I have tried what you said, but the mobile just won't boot, and i don't know why ! /:
I think i need some more files?
xboxmod said:
if you have Greloc error replace files mentioned in error
Click to expand...
Click to collapse
I don't have that.
have a look here :
http://forum.xda-developers.com:80/showthread.php?t=379598
TekTonik said:
have a look here :
http://forum.xda-developers.com:80/showthread.php?t=379598
Click to expand...
Click to collapse
Hi there, trust me. I have looked the thread many times ..
Anyway, i got an update.
I have get the phone to boot, with the orginal OS & OSFILES.. Now i just need to find what files i need to have, to get it boot..
But i still got a bug, when it boot, touchflo3d won't start, it just skips. ?
The problem you are facing might be (99%) because of improper XIP porting. Just for suggestion, go through my XIP porting guide (in my signature) and try again with a working 20924 XIP (if you cant find one then I'll up the xip.bin from which I ported and am using)
Using original OS folder would not qualify as SYS porting If you check the SYS build no, you will see the original no and not the ported build
ababrekar said:
The problem you are facing might be (99%) because of improper XIP porting. Just for suggestion, go through my XIP porting guide (in my signature) and try again with a working 20924 XIP (if you cant find one then I'll up the xip.bin from which I ported and am using)
Click to expand...
Click to collapse
Hi there.
I finally got it to work (more or less), someone, know the files i have to keep in the shell ?, it wont lunch flo3d. :S ?
Some1 know why ?
ababrekar said:
Using original OS folder would not qualify as SYS porting If you check the SYS build no, you will see the original no and not the ported build
Click to expand...
Click to collapse
But i needed to find out, witch folder there was stopping me from booting, and that was my answer , now i just need to find out what files i have to keep, and there are only 587 files..
I will report back soon
anything new about an issue, I try to port build 20757 from BlackStone and I'm facing the same problem too : replacing SYS only doesn't boot
Hi all, cooperating with udk, and thanks to the author of the tricks into \mytools folder (I'd like to thank but I don't know who he is!), XipporterEx was born, how it works.....
easy:
you have to insert into:
old xip, new xip to port, and your payload.....
in one click you can port all xip or only MSXipkernel, done it, you can inster xip_out.bin into your os.nb.payload, and if you don't know where, the rightg offset where insert it into payload, you can find it only clicking on a button, and finally you have your new os.nb.payload updated, ported and ready to cook....
all infos and download here:
http://www.forumhtc.com/forum/showthread.php?t=3471
or here:
http://forum.xda-developers.com/showpost.php?p=2813417&postcount=9
bye!
ervius said:
Hi all, cooperating with udk, and thanks to the author of the tricks into \mytools folder (I'd like to thank but I don't know who he is!), XipporterEx was born, how it works.....
easy:
you have to insert into:
old xip, new xip to port, and your payload.....
in one click you can port all xip or only MSXipkernel, done it, you can inster xip_out.bin into your os.nb.payload, and if you don't know where, the rightg offset where insert it into payload, you can find it only clicking on a button, and finally you have your new os.nb.payload updated, ported and ready to cook....
all infos and download here:
http://www.forumhtc.com/forum/showthread.php?t=3471
bye!
Click to expand...
Click to collapse
Looks very cool, i will download it now..
danny_and_2 said:
Looks very cool, i will download it now..
Click to expand...
Click to collapse
yes, for me works well, ported all 2075x and 209xx xips and ever worked fine....
try it and report
bye!
Thanks, excellent news!!!
Public link: http://rapidshare.com/files/168872430/XipporterEx_new_find_xip_into_payload.rar
xxxelent tool it work very fine
Works good here too. Great work!
Awesome tool!!! Thanks a lot!
Hey Ervius. Using your tool (its ROCKING & AWESOME brother)
Couldnt port the 20759 XIP but maybe something is wrong with the bin that I have. Will try again on shipped XIP and check
mondilv said:
Thanks, excellent news!!!
Public link: <deleted>
Click to expand...
Click to collapse
You are probably best off to go to the thread in the op. This way you get the most recent version of the tools.
Best regards,
-boggsie
I have triyed it using as old xip Diamond XIP 1.97 and new XIP Blackstone 1.14 20757, to port only MXKERNEL, it works without anywarning, but when I dump the xip using XIPPort some module are missing like :
cachefilt.dll
mencfilt.dll
relfsd.dll
htcfsfilter.DLL
kd.dll
and some other for which I have read that they can be deleted
Is it normal ?
try again,,
TekTonik said:
I have triyed it using as old xip Diamond XIP 1.97 and new XIP Blackstone 1.14 20757, to port only MXKERNEL, it works without anywarning, but when I dump the xip using XIPPort some module are missing like :
cachefilt.dll
mencfilt.dll
relfsd.dll
htcfsfilter.DLL
kd.dll
and some other for which I have read that they can be deleted
Is it normal ?
Click to expand...
Click to collapse
yes, its normal!!!
I got xipporting.bat error
pawaj said:
I got xipporting.bat error
Click to expand...
Click to collapse
??? what mean xipport.bat, if there is an exe to port xip???
ervius said:
yes, its normal!!!
Click to expand...
Click to collapse
Hi Ervius what should we do with cleaned modules ?
put it manualy in the xip or un rom or never take care about these modules ?
Regards
ervius said:
??? what mean xipport.bat, if there is an exe to port xip???
Click to expand...
Click to collapse
Thankyou for your respond.I fix it already i forgot to install .net
by the way How can I use with Artemis?
TekTonik said:
Hi Ervius what should we do with cleaned modules ?
put it manualy in the xip or un rom or never take care about these modules ?
Regards
Click to expand...
Click to collapse
the xip have to works better without all the unused modules (on diamond!) but you can try on other devices, and report witch are useless and witch not!
last version: 1.2 revision 6, here:
http://forum.xda-developers.com/showpost.php?p=3007615&postcount=383
use your preferred os.nb.payload and your preferred xip (old and new!)
in this release you can port xips and now, remove uldr section, move xip and reduce unused space between xip and imgfd section, and your os.nb.payload will be reduced around 3.5 Mb, ready to be used to build new smaller (so more memory avaiable into rom on device ) roms
ervius said:
in this release you can port xips and now, remove uldr section, move xip and reduce unused space between xip and imgfd section, and your os.nb.payload will be reduced around 3.5 Mb, ready to be used to build new smaller (so more memory avaiable into rom on device) roms
Click to expand...
Click to collapse
The problem with this revision is the resulting payload being only 3.8MB. For the ULDR removal and IMGFS increase to work we need to use the -conservative switch on nbmerge and ImgfsToNb tools. This switch doesnt allow the higher size imgfs to be packed into the lower size template
Also the tool doesnt modify the LBA & no of sectors of IMGFS partition and needs to be done manually, but again the payload wont work since the nbmerge has to be with -conservative switch. Hope I am sounding clear without confusions
I Used HTC Rom Tool. to make the NBH file. and it worked fine. my os.nb.payload file is now 4.11 mb. xip os is 20764. Available memory before was 203.49, size after was 203.49. So I am not sure what i did wrong. aside from the smaller os.nb.payload file. everything seems to be the same.
It does boot and everything is fine there.
Hi everyone
I'm playing with a new XIP to insert in my modded AZTOR HD but I can only see a quarter of the screen! It seems that this thingy is running as a QVGA device!
See attached screenshot for more infos!
HD size of the screen different than Diamond .. that why you get small pics of it
My guess is that you probably didn't port the xip well.
The original 21109 build (which is btw, a chinese hex) comes from a hermes, which is qvga.
It was subsequently ported to Polaris, which is still qvga anyways.
You need XIP and SYS from one build. I had this troubles when using new XIP 20757 and old SYS 19965. After updating SYS all been ok.
or just replace these two files(folders) from new sys to the original one
OS\gwes.exe
Base_lang_0409\gwes.exe.0409.mui
and then run Greloc again
replacing gwes.Exe from same version than xip is suffisant
adwinp said:
My guess is that you probably didn't port the xip well.
The original 21109 build (which is btw, a chinese hex) comes from a hermes, which is qvga.
It was subsequently ported to Polaris, which is still qvga anyways.
Click to expand...
Click to collapse
Hmmm, but why do I get the same results when trying the extracted XIP from Vic Diamond ROM 3.2 (CE OS 20954.1.5.0)?
Check in your SYS if you have any .96 dpi files which have remained by mistake.
As previously suggested, take gwes from a vga/192 build.
I used AZTOR HD (v8) as my base ROM and replaced ONLY the XIP section with the mentioned XIP from my last post! I haven't changed anything in the SYS section and getting this error!
Totally confusing me ...!
animelover said:
I used AZTOR HD (v8) as my base ROM and replaced ONLY the XIP section with the mentioned XIP from my last post! I haven't changed anything in the SYS section and getting this error!
Totally confusing me ...!
Click to expand...
Click to collapse
Hmm. As previously mentioned, the XIP is a device specific, language independant portion of a ROM.
This might get you started.
you can resolve this error with a XIP and SYS = (es. 20757 and 20757)
Can anyone give me some insight on this problem. I am porting 21159 to the Treo 700wx, and it keeps stopping on the WM 6.5 startup screen. I can turn off/on the display, but it never progress onto screen calibration or anything else.
I have replaced the gwes.exe file in order to get the rom to boot, as well as wincenls_wwe, but it doesn't seem to make any difference. At the moment, I'm stumped. Any help would be greatly appreciated.
86 views so far, and no replies. That can't be good...
I think I might need a gwes.exe for 240x240 screen on a 211xx build. Does anyone have one?
Any progress?
untarded said:
Any progress?
Click to expand...
Click to collapse
Nope. No responses. I did find a 6.5 rom for the treo 750, but they removed all of the dsm files, so I can't port it. I have to try to manual piece it back together.
This is really a good build, but believe me that stabilniejszy is 21,109, this is fast
stuck at boot screen usually because of
1. wrong xip porting
2. wrong wince_nls
that is what i am facing now also
cruzzmz said:
stuck at boot screen usually because of
1. wrong xip porting
2. wrong wince_nls
that is what i am facing now also
Click to expand...
Click to collapse
not necessarily. i had the same troubles too and i got it working after including HTC's TouchFLO OEM package and ConfettiCore package (which i was deleting before) in SYS.
!Aman! said:
not necessarily. i had the same troubles too and i got it working after including HTC's TouchFLO OEM package and ConfettiCore package (which i was deleting before) in SYS.
Click to expand...
Click to collapse
both of the above is not in the rom? could you share the link of ur successful SYS folder somewhere
cruzzmz said:
both of the above is not in the rom? could you share the link of ur successful SYS folder somewhere
Click to expand...
Click to collapse
i think all of the SYS 21159 floating around have ConfettiCore package inside, so u can try any. i thought it was useless, so deleted it. but it lead to the problem mentioned above. in addition to that, i had to use TOuchFLO OEM package also of my device which i deleted coz i wanted to use M$ default touchflo.
!Aman! said:
i think all of the SYS 21159 floating around have ConfettiCore package inside, so u can try any. i thought it was useless, so deleted it. but it lead to the problem mentioned above. in addition to that, i had to use TOuchFLO OEM package also of my device which i deleted coz i wanted to use M$ default touchflo.
Click to expand...
Click to collapse
sad to say dude of of the rom now have protection on it including urs so i cant use package tool to make it to SYS folder ....
cruzzmz said:
stuck at boot screen usually because of
1. wrong xip porting
2. wrong wince_nls
that is what i am facing now also
Click to expand...
Click to collapse
Already tried this. Both are correct. It's not hangs on the boot screen. It's hanging on the welcome screen. Well it's not exactly hanging. I can still power it on and off. I still get the press the middle button to unlock thing. I can turn the radio on and off. It just never moves on from the welcome screen.
I pieced some of the 750 rom into my SYS. I noticed they had modified some of the .cpr files for 240x240, so I included those as well. Flashing now, we'll see what happens.
Update: Same problem. It stops at the welcome screen.
Tryed using my existing .rom folder, and shell32.dll and shellres.dll. Still no luck.
same problem since 21xxx builds with welcome-center
I'am a german rom-cooker for glofiish m800-device.
i work since over one week on windows mobile 6.5.
I'am not success today.
The Problem is:
- No Calibration (Welcome.lnk) is launched by initflashfiles.dat
but in the file the entry is included
the biggest problem, becouse the device is unusable
- The Startmenu is wrong, only a white screen open. (very small) no solution with gwes.exe from wm61 20924 sys.
- the grey taskbar on the today-screen
i have replaced gwes.exe from working windows mobile 6.1 sys 20924
i have changed shell.exe and shellres32.dll in shell-directory from sys
to change user.hv and default.hv from metadata
to delete user.hv and default.hv from metadata
to replace folder for shell
to replace folder for phone
to replace folder for redist.
to include wince.nls in sys-folder too
The wince.nls is in my xip (rom-directory) (my kitchen need the extracted version of xip.bin)
I don't know what the problem is.
I have ported XIP 21159 from Diamond, from TouchPro, from glofiish m700, from glofiish m500 and much more. I'am sure i use actually an VGA-XIP (from Diamond, 1.post in this Thread)
but i don't know which version this is (21139 or 21159 ???)
all the same problem.
i use my kitchen based on windows mobile 6.1 and included the g'reloc.exe from WM65 Kitchen (forwarder) and the wmreloc.exe.
since my kitchen is ready for wm65. all works great by compiling the new temp.dat (the flash-file for glofiish devices)
I read i must use the same sources for XIP and SYS !!!
But what are the same Sources ???
Can anyone send me an working 21159 XIP for VGA ???
When i try to port "Diamond Payload 21159" from XDA-Developers with Xipport and Xipporterex the xip is ok, but when i insert in my kitchen, the prog "buildos" stop their working, nothing happens in command-window.
So i'am very pleasent when you can send me an working source 21159 SYS for VGA and an working Source 21159 XIP for VGA...
i have big problem with windows mobile 6.5
acutally i try windows mobile 6.1 21114 there are the same problem.
the problem is, after os-logo no calibration screen come.
big problems to call "welcome.lnk"
only whenn i insert in wrong path to welcome.lnk the today-screen display ???
do you know this bug ???
here is the rgu of the welcome-center, i think it's not compatible with m800 ???
is this welcome-center new in the 21xxx-builds ???
over one week and no succed with wm65.
at the moment the same problems with wm61 21115
REGEDIT4
[HKEY_LOCAL_MACHINE\Software\Microsoft\Shell\Rai\:M SWelcomeCenter]
"0"="MSWelcomeCenter" ; class name
"1"="wcsan.exe" ; exe to launch
"2"=dword:1 ; perf hint (RAI_PERF_*)
"3"=dword:0 ; app type (?)
[HKEY_LOCAL_MACHINE\Software\Microsoft\CHome\CWelco meCenter]
"Disabled"=dword:0
[HKEY_CLASSES_ROOT\.wcml]
@="wcmlfile"
"Content Type"="text/html"
[HKEY_CLASSES_ROOT\wcmlfile\DefaultIcon]
@="browsres.dll,-6703"
[HKEY_CLASSES_ROOT\wcmlfile\Shell\Open\Command]
@="iexplore.exe file:%1"
[HKEY_CLASSES_ROOT\welcomecenterapp\DefaultIcon]
@="coreres.dll,-20797"
[HKEY_CLASSES_ROOT\welcomecenterapp\SelectIcon]
@="coreres.dll,-20798"
[HKEY_LOCAL_MACHINE\ControlPanel\WelcomeCenter]
"Redirect"=":MSWELCOMECENTER"
[HKEY_LOCAL_MACHINE\System\WelcomeCenter]
"CmdLine"=""
[HKEY_LOCAL_MACHINE\ControlPanel\WelcomeCenter]
"Group"=dword:1
hope you can help...
I'am at the end...
I think WM'Reloc is not compatible with my device ???
Thanks
Everal
everal said:
I'am at the end...
I think WM'Reloc is not compatible with my device ???
Click to expand...
Click to collapse
I had issues with it as well. I had to go back to using g'reloc.
hey guys any solution to this problem? I've been facing it on my Samsung i780.. damn this won't move past the Windows mobile logo.. yet it plays the welcome screen sound.. what a shame..
chef raven,
not trying to hijack your thread but can you please answer my PM.
i've been waiting for weeks now.
thanks