Hi bro
i ve installed wmwifirouter on my hd touch and it works perfectly first time , but when i want to go to wifi settings in comm manager it doesn t give me anything except wmwifirouter interface .
Now the wifi for my hd is wmwifirouter !!!
did it replace my wifi drivers by its own ?
Also another thing , when i reboot my hd and start wmwifirouter , my laptop is autimatically connected with wmwifirouter hotspot and have no connection to internet ,even if it is connected over 3g or hudpa .
Last thing , i cleared storage then i reflashed my hd and all these issues with wmwifirouter are still there !!!!!
Really i can t understand why ????
Excuse my bad english and hope to have an answer brothers.
Thank you a lot in advance
Bluetooth HD & WMwifirouter
I'm also having problems, but just to prove that it wasn't dutty's rom i went back to the stock rom, cellular binded to wifi works, but cellular binded to bluetooth does not.
Does anyone else have similar problems.
When i set up bluetooth as a wireless connection it finds the Hermes running WMWifirouter, but doesn't load any services and the Hermes never ends up listed as a device i'm connected to, though on the Hermes, it shows the HD as connected, and the Dialup Networking Service as being selected
Related
hi
i have a belkin g wireless 802.x.G router at home and have a wifi setup since long..
i was always able to connect to the wireless network with Bluangel aswell as my laptops.. (i have no encyrption.. or secutrity settings)
i upgraded the radio rom to 1.12 and after that have not been able to connect to the network.. it says belkinG network found and connected but the internet explorer or msn or agile messenger cant seem to find the net settings..
internet is on share in main computer nad my lap tops still conect and use it..
i thought may be it was because of rom 1.12 but flashed older 1.31 imate with ext rom and radio rom but still cant get the internet to work..
when i use PIE it says network card not found..check settings..
in wireless settings i can see it saying that it is connected to belkin network
can anyone help me
thanks
zohaer21 said:
in wireless settings i can see it saying that it is connected to belkin network
can anyone help me
thanks
Click to expand...
Click to collapse
can you see if your pda2k's wlan adapter has an IP address? if not, then only radio is connected but that doesn't mean you have a working network connection.
I use vxUtil which is a collection of network tools, this enables me to ping, check settings, ip addresses and a whole lot of other stuff since the onboard utils just don't cut it for network use..
argh
I have the same problem although I havent upgraded any radio settings! My Wifi has worked fine since ive had my m2000, being able to stream video and music or surf the web. but recently i cant surf the web although I can still stream music.
Ive downloaded the program you reccomended, but not to sure what to do with it. Any help would be ideal
Thanks
hi
thanks guys.. i dont know what happened but everything is eorking now ..including the net.. just turned wifi on.. it asked me again whether this is for work or internet (evn htough i had it connected to internet last time aswell)
thanks
hi since upgrading my tmobile vario11 hermes 300 to wm6 shacp 3.30 i radio version 1.46 i cant get my wifi connection to work , it will connect to the conection ok , and in connection manager , it will show connected to wifi network , but every time i try and go on internet with phone , it will say there is no internet or data connection avalible? even if it is connected to my wireless connection , any ideas guys ? it is really annoying!
ripplingsnake said:
hi since upgrading my tmobile vario11 hermes 300 to wm6 shacp 3.30 i radio version 1.46 i cant get my wifi connection to work , it will connect to the conection ok , and in connection manager , it will show connected to wifi network , but every time i try and go on internet with phone , it will say there is no internet or data connection avalible? even if it is connected to my wireless connection , any ideas guys ? it is really annoying!
Click to expand...
Click to collapse
I suppose youve tried soft-reset and all that..
does it connect to the internet if you have it connected via usb to the computer?
i havent tried the comp connection no , and yes tried soft reset etc , but if it says it is connected to wifi on phone why is it not using it? i am in UK Btw
ripplingsnake said:
i havent tried the comp connection no , and yes tried soft reset etc , but if it says it is connected to wifi on phone why is it not using it? i am in UK Btw
Click to expand...
Click to collapse
Normally if it is connected to WiFi and if you know the WiFi has a good connection to the internet (i.e. no security, timing, aso.), it should connect. If WiFi does not work, it should try the Wireless connection. If u say that is also setup but still doesnot connect, try to connect it to the computer via USB and see if thats working.
I have used schaps 3.30c until a couple of hours ago and it was working with no issues over wifi and wireless... try hard reset then...
sorry i cant help more...
hey...I have the same problem with my X01HT... I can access to the WiFi in the office and even remote control my PC, but I still cannot visit Internet on the device...pls advise
anyone could kind lent me a hand ?
Does this help?
http://forum.xda-developers.com/showthread.php?t=318748&highlight=proxy
Hey !
I've flashed several found-on-xda-developers-homecooked-ROMS and so far, everuthing went fawlessly (known bugs exepted)
For now i'm usig schaps' 3.60a WWE ROM, best ROM I've ever used.
Now, my problem is : my voice calls are disconnected when my TOMTOM 720 tryies to download traffic datas from the internet (e.g. it establishes a data connection)
Furthermore, the always on connection i chose whith shchaps' configurator seems to get disconnected when TOMTOM tries to connect.
So, to the questions :
- Does anybody knows how to have data and voice simultaneously for exemple when using a TOMTOM device
- Why on Earth is a perfectly working 3G connection get disconnected to establish a new one with the same provider ???
Thanx everyone, keep up the goog work !
Has anyone been able to get this (WMWifirouter) to work on the touch HD?
Mine just says USB=waiting for connection for ages and never connects.
Hi Johseph.
I just installed the trial cap yesterday and have had no problems at all. Both 3G -> wifi, 3G -> USB worked fine. I though had to restart HD first and do not open "Internet sharing" as it seem to be a problem for me.
Balthazar
Why don't you use the built-in internet sharing function? It works
Johseph i use it all the time with my laptop and its exelent. Version is 1.25 (built. 600) if you have some other version try this one.
Neven24 said:
Johseph i use it all the time with my laptop and its exelent. Version is 1.25 (built. 600) if you have some other version try this one.
Click to expand...
Click to collapse
What is the program called?
I live in the US so i cannot get 3G on my HD so maybe that is why i cannot get it to work.
The programm sould work wirh gprs/edge too only your access is slower.
I have installed it too and it works flawlessly. You need to activate Wifi and bluetooth
before you start wmwifirouter
I have been using both the CM Internet Sharing program and the WMWifiRouter with no issues for over a year now on my AT&T Tilt 2.
One day a couple weeks ago I had been using CM to connect my laptop to the internet. everything was just fine as usual.
At some point, I had disconnected and tried to reconnect, and since then I can no longer use either of these programs.
What happens is this...I turn them on and the phone will no longer hold a connection to the ad-hoc network that is created. Up in the status bar I see the icon showing WiFi trying to connect but it will not stick anymore.
I can connect to my office and/or home wifi router still. It just will not connect to the ad-hoc network any longer.
This makes no sense to me at all, since it has always worked and was even working earlier in the day when it stopped working.
I use the tethering frequently and really need to get this solved. Any help would be greatly appreciated.
NOTE: I am able to connect using WMWifiRouter using the USB connection option.
Any help? Please?
Hmm...
I had this problem on a stock WinMo 6.1 ROM, I fixed the problem by hitting Advanced in Comm Manager [or go into the WiFi setting in Settings-System] and then connect to an infrastructure point. Comm Manager doesn't like Ad-Hoc points for some reason. Did you try resetting WMWiFiRouter? There's a setting in it for that.
Not that I'm sure any of that will work, I at least got it to connect to normal access points now and make the Ad-Hoc connection, but there's no throughput in the connection and I really don't feel like reinstalling my custom ROM, so I just popped my SIM into my MyTouch. But that doesn't really help you... sorry...
Thanks, but none of that is gonna help.
I have no problem connecting to any normal wi-fi network.
It had no problem connecting to Ad-Hoc for the last year until the other day and NOTHING has changed.
I was using CM Internet Sharing and not WMWifiRouter. I switched back to WM because at least with that I can set it to use USB. But neither program is working with Ad-Hoc now.
I don't even see the setting for infrastructure point. I am not on a stock ROM. I also just realized my signature was old. I'm on a Tilt 2 with a custom Manila ROM.
It's just so weird cause it always worked and suddenly stopped!
Arg!!!!!!