Related
(转自XDA)原文如下:
How to Flash Rom using Internal Storage Method , a safer, quicker and better way to flashing
*.Rename ..NBH file to DIAMIMG.nbh
*.Copy to Internal Storage
*.Soft Reset + Hold volume down button + back button <----
*.Follow instructions on screen
1:将刷机包xxx.nbh文件改名为DIAMIMG.nbh,然后复制到内存卡根目录下(注意字母大小写)
2:同时按住音量"一"向下键和后退"<="键不放用笔捅一下重起键直到出现图2的英文字,,
3:按一下开机键开始刷机,如图进度条,按中间的导航键取消
4:等待进度条完成显示update complete update success刷机完成!重启即可
-----------
Why my Diamond can not do it like the title?
My Diamond cannot connect by USB,just connect over bluetooth
Thanks.
And in english, you can read Suiller tut .
R. DevilR said:
And in english, you can read Suiller tut .
Click to expand...
Click to collapse
Can you show me the link of the base article?
or the method pages
Thanks
When i Press the power on,then Press Vol- and "back"menu(actual is the right botton),the screen is like this picture
apaddy said:
When i Press the power on,then Press Vol- and "back"menu(actual is the right botton),the screen is like this picture
Click to expand...
Click to collapse
...what happens after "Loading...."?
Nothing?
Install Jockyw2001's 1.23, 1.24, 1.34 Hard-SPL!
apaddy said:
When i Press the power on,then Press Vol- and "back"menu(actual is the right botton),the screen is like this picture
Click to expand...
Click to collapse
I think that this happens because you don't have an updated hardspl... or at least you are trying to flash an "un-signed" rom with a signed-only hardspl, does this happen also with stock original rom?? if you can flash in this way with stock original rom the problem is the "signed-only" hardspl
bye,
davide
cyron_at said:
...what happens after "Loading...."?
Nothing?
Install Jockyw2001's 1.23, 1.24, 1.34 Hard-SPL!
Click to expand...
Click to collapse
I'm reboot the Diamond when i had waited for a long time(about 10 minutes)
non for the "loading"
suiller said:
I think that this happens because you don't have an updated hardspl... or at least you are trying to flash an "un-signed" rom with a signed-only hardspl, does this happen also with stock original rom?? if you can flash in this way with stock original rom the problem is the "signed-only" hardspl
bye,
davide
Click to expand...
Click to collapse
I'm just only put the Hard SPL into the phone and named for the DAMING.nbh
by the phone wasn't flashing.
may be the path has some problem?my phone path has chinese because my phone system is HongKong non for the "Stroage Card"!It's 内置储存(for chinese)
Dont know if you can flash HardSPL by Internal Storage method.. You should download HardSPL and install via cable just to be safe. If flash HardSPL failed, you will probably brick your phone too.
raspdeep said:
Dont know if you can flash HardSPL by Internal Storage method.. You should download HardSPL and install via cable just to be safe. If flash HardSPL failed, you will probably brick your phone too.
Click to expand...
Click to collapse
My phone cannot connect by cable.May be my phone some problem with hardware.then the phone is newly.No people can repair it.
So I want update it by myself.
When I Press the Vol- and the Right button then Kick the little red button under the phone. It nothing happen.
I'm sorry to my poor English...I cannot write more.
Now I'm not going Download the Rom.I'm downloading the Hare SPL.in to the Phone...
WHY when I press the three button[Vol- "Back"(Right Button),Reboot(Red button)],the phone was non power on.
I had to Press the "Power",then Quick Press the Vol- and "Back"button ,the screen was different with the forum of others?
I don't know what has happen to my Diamond...
For those that are flashing stock roms (which comes in executables), you can extract the rom file (.nbh) easily, and place this stock image in ur storage drive for easy flashing should you need to restore to stock conditions (minus the SPL of cos).
Clear your temp folder (run disk cleanup)
Disconnect ur device from the PC if connected
Start the installer
Go to your Temp folder (ensure u can see hidden files). Temp folder is usually at C:\Documents & Settings\[USERNAME]\Local Settings\Temp.
Find the rom file and copy out of that folder
knave said:
For those that are flashing stock roms (which comes in executables), you can extract the rom file (.nbh) easily, and place this stock image in ur storage drive for easy flashing should you need to restore to stock conditions (minus the SPL of cos).
Clear your temp folder (run disk cleanup)
Disconnect ur device from the PC if connected
Start the installer
Go to your Temp folder (ensure u can see hidden files). Temp folder is usually at C:\Documents & Settings\[USERNAME]\Local Settings\Temp.
Find the rom file and copy out of that folder
Click to expand...
Click to collapse
_____________________________________________
When I had clear the temp of Windows? Or clear the temp files of the Diamond?
My phone cannot connect to the PC.So i have to send the Roms over the Bluetooth....Does any temp fils in the Mobile phone?
I see only very fast 'image not found' then it says' triggering USB host' for some time, before restart and non flashed.
Strange, I have the DIAMIMG.nbh file in root of internal storage.
apaddy said:
When I had clear the temp of Windows? Or clear the temp files of the Diamond?
My phone cannot connect to the PC.So i have to send the Roms over the Bluetooth....Does any temp fils in the Mobile phone?
Click to expand...
Click to collapse
You should clear the temp folder of Windows. This is to allow you to easily find the extracted rom files which will be extracted into the temp folder when you run the installer.
knave said:
You should clear the temp folder of Windows. This is to allow you to easily find the extracted rom files which will be extracted into the temp folder when you run the installer.
Click to expand...
Click to collapse
I'm update by the Phone.Is any problem with the PC?
the Extracted rom was download on the website.is correct I'm sure.
thanks.
Riel said:
I see only very fast 'image not found' then it says' triggering USB host' for some time, before restart and non flashed.
Strange, I have the DIAMIMG.nbh file in root of internal storage.
Click to expand...
Click to collapse
have u got it connected to the PC? the phone cant see the internal storage while connected to the PC...
This work great. Flashes in about 2 minutes.
knave said:
You should clear the temp folder of Windows. This is to allow you to easily find the extracted rom files which will be extracted into the temp folder when you run the installer.
Click to expand...
Click to collapse
you can use a program called Win-RAR this program makes it easy extracting executable files and many others
old thread but my phone just stays at "loading..." i cant flash crap via activasync. only 1 did work the leaked sprint rom any other for the diamond give me a connection error. im sure that hardspl crap has to do with it as mentioned above but last time i ever tried that it added a few files to my phone then proceded to load jumpspl.exe and locked my phone up and did nothing. this is a great phone and i hate to miss out on all the goodies u people are getting!!!
Hi all guys and gals
I hope this post will help all noobs by giving the most important guidlines for upgrading the ROM, CID unlocking and upgrading SPL & IPL
Please follow the instructions exactly in the order written
1. READ THROUGH XDA-DEVELOPERS.COM.. TRY TO UNDERSTAND WHAT YOU WANT TO DO WITH YOUR DEVICE BEFORE ATTEMPTING ANYTHING SUGGESTED OUT HERE.... This is very important and might save your device
2. Try and find out what to do if something goes wrong.. Its highly likely that something will go wrong if you do something wrong..
3. Now if you still think you want to upgrade your operating system (Windows) then do the following step by step
a) Download the required SPL & IPLs from the forum.. you can find
the most suitable ones in your respective device fora
for elf and elfin you can checkout these threads
http://forum.xda-developers.com/showthread.php?t=408637
http://forum.xda-developers.com/showthread.php?t=445666
http://forum.xda-developers.com/showthread.php?t=408637&page=72
b) Read carefully through those threads
c) Unzip the zip archive containing elf_uspl.exe and other filees
to your computer's c drive
d) Connect your device to your computer using the usb cable.. and in
your device go to settings and open usb to pc tab and disable
advanced networking capability
e) Make sure that the activesync is enabled(appears green in the try)
f) Close any application running on your device and make sure that
your device battery is atleast 50%, disable hibernation and screen
saver option on your computer
g) Open the folder you unzipped already and run the file with a name
which looks like elf_uspl.exe and follow the onscreen instructions
h) Now your device is CID unlocked successfully (your device screen
should go white and then you should be able to see a penguin logo on
your device screen.. if that doesn't happen then you should repeat
the process.. THIS STEP IS THE MOST IMPORTANT ONE.. DO NOT AT ANY
COST PROCEED FURTHER IF THIS DOES NOT HAPPEN...
i) Now run the RUU(ROM UPDATE UTILITY). This can be found in the
unzipped folder(open the unzipped folder and you will see another
folder with a name RUU
j) Follow the instructions on the wizard..
NOTE: DO NOT DISCONNECT/RESET YOUR DEVICE BEFORE OR AFTER THIS
k) Wait for the wizard to finish its job.. do not inturrupt.. If the
wizard gives any error then please hard reset your device(hold down
call & hangup buttons together and push soft reset button and keep
holding the buttons till you get a warning message on the screen).
Restart the whole prpcess again.
l) If the wizard completes the update successfully, then your device
will re-boot..
m) You can hard-reset your device now.
n) Now your IPL & SPL is successfully upgraded and you can move on to
upgrading the Operating System
o) To upgrade your OS you need to search for and download the
appropriate ROM from this forum.. you will get plenty of ROMs
floating around.. so pick yours and extract it the root of one of
the drives on your computer.. Open the unzipped folder.. connect
your device to your system.. follow all the precautions already told
and run the RUU found in the folder.. Follow the onscreen
instructions.. Do not intrrupt the process..
p) If the update wizard gives any error then repeat the whole process
q) After finishing your device will re-boot and you will have a new
device in your hand..
Do not forget to thank all the hard working guys here who made all this
possible.. and please donate to the developers and hackers..
Hope my advice would help all the noobs..
If you find this useful.. you can thnk me and can rate this thread
My Thanks to !Aman! and all other great guys here
One more important thing before CID Unlocking
Sorry guys I forgot to add a little detail...
Before you try to CID unlock your device you need to download and install these 2 small .cab files on your device.. this step is a neccessary one for ELF n ELFIN
you can download these files from here
first download and install this Cert_Spc.cab
And then download and install Enablerapi.cab
DONT FORGET TO THANK AND DONATE TO XDA-DEVELOPERS
Another Note
Please visit this thread for some more details
Read below for updating ROM through sd card
1. First CID unlock your device and flash the coocked USPL & IPL as instructed earlier
2. Copy the .nbh file (THE ROM .nbh) to the root of your storage card and rename it as ELF0IMG.nbh
3. Turn off your device and now hold the CAMERA button and POWER button together and keep them pressed and now push and leave the SOFT RESET button with the stylus and release the other buttons when you see the bootloader screen..
4. Follow the onscreen instructions and choose the appropriate option.. thats it.. your devices' ROM will be updated.. soft reset or hard reset your device after this..
ENJOY
i have same HTC Touch 128/256 but i did mistake and now my touch showing RED,GREEN,BLUE Screen RUU HELP ME
Hey!
Is it some way to run (install) "RUU_Diamond_HTC_SVE_2.03.413.2_Radio_Signed_Diamond_52.51.25.26_1.09.25.23_Ship.exe"
in Linux (Ubuntu) op.system
Hi,
AFAIK it is not possible to run the exe under Linux/Wine. What you can do however, is copy the nbh to the root of your internal storage, rename it to diamimg.nbh and boot your diamond in flash mode (press volume down button + back button while pressing reset).
Instruction from the Wiki:
http://wiki.xda-developers.com/index.php?pagename=Diamond_FlashfIS
Best regards
loermansa said:
Hi,
AFAIK it is not possible to run the exe under Linux/Wine. What you can do however, is copy the nbh to the root of your internal storage, rename it to diamimg.nbh and boot your diamond in flash mode (press volume down button + back button while pressing reset).
Instruction from the Wiki:
http://wiki.xda-developers.com/index.php?pagename=Diamond_FlashfIS
Best regards
Click to expand...
Click to collapse
Yes, thanks for your help. I have try this before with other roms, but what program open the .EXE file in ubuntu?
leffep said:
Yes, thanks for your help. I have try this before with other roms, but what program open the .EXE file in ubuntu?
Click to expand...
Click to collapse
wine is the only one , there are others like crossover and cedega (for games) but there built on wine
Extract RUU_Diamond_HTC_SVE_2.03.413.2_Radio_Signed_Diamo nd_52.51.25.26_1.09.25.23_Ship.exe file with File Roller and you get diamimg.nbh
Or simply rename .EXE to .RAR and unzip it
Ok, Thanks for all help. Its help me alot!
QUICK guide How-To Update your Diamond ROM
Well , I have been one of those guys that are not so go with the whole updating the ROM things...
So I have finally did it... after weeks of pain.
These are the steps to update your ROM.
Try follow these Steps and you should be fine
Step 1
You will need to HARD-SPL your phone...
You will need to download the Unsigned-Hard-SPL-Diamond-OliNex.zip
http://forum.xda-developers.com/showthread.php?t=400950
Download, extract to an empty folder.
Run RomUpdateUtility.exe, Have Phone Synced with PC in Windows Mobile
follow steps, check device for prompts after PC shows loading bar. it should to black screen now.
SPL flashes, device automatically reboots, job done.
to confirm you got it installed, go into bootloader mode (volume down + reset, i.e. press volume down button and reset then keep holding the volume down key until you see tricolour screen) and verify the screen shows 1.40.OliNex.
note: you will not see the SPL version during normal boot, that is the OS version, not SPL!
Step 2
Diamond Custom RUU Updater Software
You will need to download DiamonCustomRUU.zip
http://forum.xda-developers.com/showthread.php?t=396073
Download the software
Extract to a folder on your desktop
When you are ready to update the phone, copy the ROM file into that folder
*** Remember to RENAME the file to RUU_signed.nbh
Step 3
Download a ROM
There are many fine ROM on the forum, choose one that you like.
Here is one you can use
http://forum.xda-developers.com/showthread.php?t=563245
I hope this helps some people that have struggled to make sense of it all. Please remember there are complete "Bibles" on how to do this. The above is just a quick how-to.
Other Guides you can view (which are excellent)
http://forum.xda-developers.com/showthread.php?t=416211
I think we should thank all the guys that made the HARD-SPL,Updater and ROMS
TOM_Codon
Michal_banszel
Cmonex
http://forum.xda-developers.com/showthread.php?t=416211
Just keeping it simple
Just keeping it simple.....
Well I think you did a great job! The thread he linked to may be too compliant. You keep it clean, so it's easy for noobs to learn the basics.
Thank you.
Excellent
Dekster thank you for making it easy for me to do this rom thinge. I was a very confused with all the stuff on the other posts, yours put me on the right track and sorted me out. i am new to all of this stuff.
so far so good.
Elo
Nice work
You really made it easy! Thanks!
Hello guys. I've been trying to instal android on htc tytn II and i can't make it.
i am using the tutorial on sourceforge but i can't do it
at step 16...what should i put at working dir (C) ?
How should i put the fstab at step 11 and 22?
I've searched for answers on many posts but i still can't manage to make it work.
Can somebody please help me?
Also....is there another way to install android? usb mode or something?
blacki3 said:
Hello guys. I've been trying to instal android on htc tytn II and i can't make it.
i am using the tutorial on sourceforge but i can't do it
at step 16...what should i put at working dir (C) ?
How should i put the fstab at step 11 and 22?
I've searched for answers on many posts but i still can't manage to make it work.
Can somebody please help me?
Click to expand...
Click to collapse
i think lets take a look at the picture again :
-[attached]-
for fstab, i leave it "auto", and now incubus work great on my kaiser.
just make a new folder on ur storage(D), or system(C), rename it to "build" (just example, bcos i rename it like that), and put all of ur work an there.
follow all the steps, and ur kaiser will turn to android. if u need more help, just ask me, or the other mate.
hope me answer can help u
i was wondering if i could find somewhere the files i need, so i can just put them on the phone and install
blacki3 said:
i was wondering if i could find somewhere the files i need, so i can just put them on the phone and install
Click to expand...
Click to collapse
u can find all the files u need inside the forum. just try to explore more deep
try to combine all the tutorial how to install android on ur kaiser, it will be great.
start with this : http://forum.xda-developers.com/showthread.php?t=433835
( [Resources] Flashing Your First Kaiser Rom (For Noobs) )
try to follow all the tutorial, but at the number 5 (Download and Flash your Prefered Rom) change ur rom into android rom.
and continue with this : http://forum.xda-developers.com/showthread.php?t=680518
( How to replace Windows Mobile with Android (Guide) )
for me its not a complete guide to install android on ur kaiser, but it just the simple guide.
dont forget to read this note :
Code:
Originally Posted by zenity
If you are experienced at flashing Winmo using KaiserCustomRuu,exe through activesync, then you can do the same with the KAISimg.nbh, just rename it to RUU_Signed.nbh and copy it to a folder on the pc along with Kaisercustomruu.exe, flash as you would with winmo.
(do this thing if u find a problem when u try to install the kernel from SD card)
and then, u can combine the guide/tutorial with this : http://sourceforge.net/apps/trac/androidhtc/wiki/HowToInstallWithAtoolsNand
just read carefully 1st. check all the step. read again, and check again. trial eror.
ps from me : practice make perfect
for the other mate, just correct me if im wrong.
hope my reply can help u.
That are the ones that i was following when i tried to install windows. But i didn't work. Can i just find the files to download from somewhere and just put them on the phone and install? It whould be easier this way
and i have another problem. I have a 2 Gb sd card but i cand only read 1 gb...what could be the problem?
blacki3 said:
That are the ones that i was following when i tried to install windows. But i didn't work. Can i just find the files to download from somewhere and just put them on the phone and install? It whould be easier this way
Click to expand...
Click to collapse
ok, ill give u owl the tools that i use to install android on my kaiser.
try it, but i take no responsibility
1st, download this
Code:
http://bits-=xXx=-hare.com/?f=k1dojuib
(remove the "-=xXx=-") and unzip.
get the hardspl from here : http://forum.xda-developers.com/showthread.php?t=498320
choose the : DaveShaw (.hard)
3.34 Hard SPL nostuckinSPL Force USB
and flash it use active sync. this is the step :
(copy paste from mskip's treat)
Code:
Flashing via ActiveSync with USB Lead
1. Copy JumpSPL1.56-KAIS.exe, JumpSPL1.93-KAIS.exe and JumpSPL1.94-KAIS.exe to your device memory (NOT STORAGE CARD)
2. Pull out the battery and reinsert it (this step IS important) *DONT turn phone back on yet*
3. REMOVE SIM and SD CARDS!!
4. Turn phone back on and let it boot back into your operating system
5. Connect your phone to PC with a USB cable and wait until it syncs with your PC
6. Run File Explorer on your phone, browse to where you copied JumpSPL1.56-KAIS.exe on your device and run it (make sure the USB cable is still connected). If you get a white screen then reset your device and now try JumpSPL1.93 and lastly try JumpSPL1.94 if that one doesnt work.
7. CLick Continue on phone when prompted
8. After a few seconds the tri colour screen will appear on the phone and "USB" will be displayed at the bottom
9. Unplug the usb cable for 30 seconds and then Replug (phone will not re-sync but still says "USB" on the screen)
10. Right click on the Activesync icon in the bottom corner icon on the computer, goto connection settings, deselect "Allow USB connections" and click "ok"
11. Run the KaiserCustomRUU.exe file on your PC thats in the same folder as the HardSPL .nbh file and follow instructions (ticking boxes and clicking Next) *DO NOT re-enable USB Connections in Activesync*
12. Update will goto 100% (should take less than a minute), the Congratulations screen will be displayed on the PC and the phone will restart
13. Unplug USB cable from phone then REPLACE SIM and SD CARDS !!
14. Restart phone
*Remember to re-enable "Allow USB connections" in Activesync connection settings after a successful flash*
just rename the hardspl file to RUU_Signed.nbh and copy it to a folder on the pc along with Kaisercustomruu.exe, and install it.
---------------------
after that, upgrade ur radio. grab it from here : http://forum.xda-developers.com/showthread.php?t=393182
choose : 1.71.09.01
and rename the radio file to RUU_Signed.nbh and copy it to a folder on the pc along with Kaisercustomruu.exe, and install it.
----------------------
next is ur kernel. use Krazy-Killa's Kernel Release - RLS3 (2.6.32.9).
grab it from : http://forum.xda-developers.com/showthread.php?t=980551
download the Attached Files, androidupdate.tar and KAISIMG-PANEL2-320-TILT1-FROYO.NBH.7z
before install the kernel, dont forget to edit the kernel with atool. choose device to kaiser, resolution to 240x320, version to froyo, panel to 1, and keymap to nornal. and save it.
install the kernel. rename the kernel file to RUU_Signed.nbh and copy it to a folder on the pc along with Kaisercustomruu.exe, and install it.
just keep the androidupdate.tar . we will install it after install the ROM.
if u done, u will see the black screen with a lot of text. and tux on the top of ur screen. wait until the text stop rolling
turn ur phone off, and take ur SD card out.
---------------------
now the ROM. i use Incubus26Jc's Super FroYo 2.2 [Deodexed] [RLS15]. u can grab it here : http://forum.xda-developers.com/showthread.php?t=759894
but u can choose another ROM.
format ur SD card to fat32. make a new folder, and rename it to : andboot
copy the androidinstall.tgz (or u will find androidinstall.tar) to andboot folder on ur SD card.
replace ur SD card, turn on ur phone. when u see the black screen with the rolling white text, hold ur dpad button, until u see the instalation screen. choose 1. install system
wait untill u read the "android instaled" text. (or the same meaning text)
ur android already instaled on ur kaiser now.
----------------------------------
the last step is, turn off ur phone, take ur SD card out, and copy the androidupdate.tar that u download it together with the kernel, to andboot folder on ur SD card. dont forget to delete the androidinstall file.
replace ur SD, turn on ur phone, at the black screen, hold ur dpad, until u find the menu, and choose : 4. Install update
if done, choose : 2. Fix permissions, then quit.
wait, make a cup of black cappucino, grab some sanwich. bcos it will take a long for ur kaiser to reach the android.
i hope me reply can help u.
for the other mate, dont forget to correct me if me wrong.
thx
i cannot instal the kernel...it says...quote: "C:\Users\Bogdan\Desktop\android\RUU_Signed.nbh" (this is an error). I can only choose ok and it exits
blacki3 said:
i cannot instal the kernel...it says...quote: "C:\Users\Bogdan\Desktop\android\RUU_Signed.nbh" (this is an error). I can only choose ok and it exits
Click to expand...
Click to collapse
it wud be easy for me to analyze the eror, if u give me the full eror message.
dont forget to turn off ur phone, and enter the boot loader. camera button and reset ur phone.
or try to rename the kernel file into KAISIMG.nbh
waiting for ur next try
this is the error
and i cannot find hardspl 3.34....when i download it from the link you provided it sais 3.29
actually...this is the error
I instaled the kernel but when i whant to install android it says something like.....failed...no space left on device. what could be the problem?
this is a bootlog