I having problem of ringing volume back to 60% after reset
I just upgraded to 2.03.707 original rom which i downloaded at htc.com
I adjust my ring volume in TF3D to 75%. Everytime i softreset, it will back to 60%. I remembered i do not encounter this problem in the 1.93 rom.
Anyone have any thought?
No one experienced this?
Ok. Any other method to change this? Anyone know how can I change this in registry?
Thanks.
Uhm... u did a hardreset? Almost always fixxes issues like that ...
Yeah... i found this to be interesting.
I did not hardreset. Instead of that, i adjusting to volume and keep soft reset to see its behavior.
Strangely, it seems that with this ROM, the volume only limit to 5 bar (means 20, 40, 60, 80 and 100%).
If you adjust your volume in TF3D to 70%, after soft reset it will back to 60%.
If you adjust your volume in TF3D to 75%, after soft reset it will back to 60%.
If you adjust your volume to 40%, after reset it still 40%.
If you adjust your volume to 80%, after reset it still 80%.
It is very strange.
(-.-) ... zzzZzzzZZzzz
Related
Hi, i have just got a new xda orbit and noticed that when the backlight goes off after a set period (30 secs), it seems to be still lit but only very slighty, so at night you still see the today screen etc. But if i press the power button then the display goes off. Is this correct ?
The reason im asking as i have been using an xda mini s for over a year and when the backlight times out the display is not visible at all in the dark. You have to press the power button to see the screen again.
Hope this makes sense
Yes, that is fine. The dim backlight will go out in time too.
MaskedMarauder is 100% right. It will go out eventually.
Ok thanks guys for the quick reply, just obsevered it last night and noticed it was different.
Thanks again...
I've tried posting about this before, but it never gets answered - i've got a mda III, and that dims to brightness 1 (from within the registry), but will never go out - regardless of what rom i've tried.
I've also noticed that i can force set it to 0 in the registry, but thats the overall screen brightness. None of the other reg keys (putting bkl1:, etc in the various power keys) seem to work.
Any one got any ideas or utils to sort this? I'd try to code this as there are some code samples which allow you to force this, but i've not got VS
Like you i've tried all the registry edits i can think off to no avail. I too have a wizard and find this irritating - plus backllight stays on when media player on etc.. No difference with wm6 so i guess it maybe a hardware issue. I use a small app to turn off display when apps are running and i want the display off.
I use backlight time of 30 secs and power of 1 minute - so overall similar to my wizards backlight time of 1 minute.
why not..
why not just pres the I/O button on the side to turn off the backlight when u don't want it on? obviosuly a bit of a hassle, but if u get into the habit of doing it, no problems
Because that puts the device into standby and turns everything else off too (except the phone etc.) So if your listening to music your plunged into silence.
I had an XDA2i (Alpine) previous to my Orbit and I actually prefer the dimmed screen.
A brief press on the 1/0 power button WILL make the device go into standby.... BUT...
press and HOLD the power button for LONGER than 2-3 seconds and it toggles the backlight on and off, whilst STILL keeping the device on!
hope this helps
Joe
Hi,
I am facing a problem where, I am unable to save changes to backlight settings.
I went into start-->system-->power and under that advanced tab.
The option where it says turn backlight off after 10 sec.
I changed it to 1 min. It saved the option.
However once the phone restarts, it reverts back to the same 10 sec.
Just to give you head up, I installed advance configuration tool.
i thought it might be something in the registry.
i looked into the registry, found the setting, changed it to 60 sec.
I thought i achieved success....
but... after the soft reset, was back to the same old thing.
Anyone faced a similar problem before.
Its device lock. When you lock your device using device lock it resets your backlight to 10 seconds.
Try changing
[HKEY_CURRENT_USER\ControlPanel\BackLight\LockLevel]
"LockLevel"=dword:00000003
or look at this
http://forum.xda-developers.com/showthread.php?t=269743
I haven't looked into the above solution, but I just wanted to say that I also have the problem of my backlight setting changing back to 10 seconds after soft resetting. I never lock my phone and it still does it, so I don't know if locking the device has anything to do it.
Some things I've noticed are that it always goes back to the default 10 seconds if I soft reset by turning the power off and on using the button on top, but it usually doesn't if I soft reset via HD Tweak's Soft Reset or by pressing the red button in the back...
It's been going on for so long that I go straight to backlight settings to change it back without even thinking about it anymore...
My earpiece volume is adequate for me when it is set to MAX, but it reverts to somewhere in the middle every time I power cycle or reset my phone. I want it to stay at full volume *always*. I have changed everything I could find in the registry having to do with volume to the maximum, but still the phone always boots up at the halfway point. Driving me nuts!
Is there any way to force my volume to stay at the maximum level all the time, and preserve that setting when the phone is reset or powered off and on?
BUMP - in the hopes that someone knows the answer to this and missed it the first time around....
Hi,
I have a Blue Angel (XDA IIS) that has been flashed with WM6.1. I have been using it for a few years until recently that I got this weird problem.
While the phone is idle, suddenly the volume increases automatically by itself, as if some one pushes the volume slider up, and keeps pushing it. As a result, the speaker keeps beeping as the volume already hitting the max.
After awhile, it will then stop. For a short while later, it starts again. While this is happening, I cant turn off the phone using the power button on the top. But I can turn off the backlight by doing a long-press.
I have tried to reflash the firmware and also did a hard reset, but it doesnt solve the problem.
Anyone has encountered this weird problem? The buttons seem to work fine when not in that weird condition. If it is not software problem (since I reflashed it) and hardware (buttons work fine in normal situation), what else could it be?
Any idea anyone? Really appreciate some advice.
Rgds,
CH
I have a knob/sound problem with my HU (MTCE px5 Android 8 with 3 buttons and a knob) and i strongly believe that is a software issue, as it always happens at 10-20 first minutes, then everything is fine.
I start the HU everything running fine, but NO SOUND, turn knob or steering volume buttons volume bars appear but no sound. If I wait 5-10 minutes usually the sound starts suddenly. Now i ve been to a high level to trick the sound to awake, so find out jumping from app to app may awake faster. The weirdest trick I found is to turn the knob and immediately in the touch screen with my finger to the volume bar left right usually works. When the sound awakens, for some minutes the volume does not smoothly go up or down, but there are big gaps and steps!
Everything starts while the HU has the factory ROM. I 've done factory reset twice, nothing. Now i have installed Malaysk 3.5 (which is great), hoping to solve the issue, but not.
Any idea, maybe knob mapping, or knob resetting or anything else?
Anyone??
Send it back for warranty service? What else have you tried and what does reseller suggest?