[MOD-EDIT]
This is the reason that the user gave:
Hello at all. I am happy to be new in this Forum.
I HAVE A GREAT PROBLEM that tormented me!
So, my unfortunate story:
4 days ago I updated the SO of my Qtek 9000 from WM5 to WM6.
I downloaded a ROM but, unknow the correct procedure, I open from the SD with PDA connected to PC the file EnterBL.
Immediately the Qtek turns off and remains in the boot screen with "Serial" and "v1.00". If I connect PDA to PC the USB change in Serial. (I have removed the tick from activesync for recognizing USB but if the PDA is connected in USB is not recognized by PC)
I tried all attempts that I found in the network.
example:
-Bootloader with button combination reset etc .--> NOTHING!
-mtty ---> NOTHING!
(I have downloaded 2 versions: The first did not refer to the USB port, with the second if I select USB a message says "CAN NOT OPEN PORT"!)
-by SD----> NOTHING!
I opened a lot of ROMs that I downloaded, but every process to upgrade does not arrive at 0% and so it leads to several errors:
-error 101
-error 114
-error 150 etc..
In the Upgrade (that ever fails) in the window where are should be the Previous and New ROM to install ... well here all the fields are empty!
After this will be the message: "RUU has stopped working"!
booooooohhhhh!
My notebook SO is Windows Vista.
I have also a v1640 (as Qtek but Vodafone) taken as replacement electronic parts. In this v1640 PDA there are broken Microphone, the insert of SD card and the LCD has a strange problem with screen image that is reflex. I tried to update the ROM of this and I'm successful without problems!
Could be useful the v1640 to do something for bypass my Qtek? I also thought to put the motherboard of v1640 in the Qtek but I do not agree because of the microphone and the insert SD are broken!
I'm desperate ...! I try some "holy" that with a little patience can help me in the procedure step by step!
[/MOD-EDIT]
[size=-3]
original text was:
Salve a tutti. Sono felice di essere nuovo del Forum. Fin'ora ho avuto modo di apprezzarne l'utilità da esterno.
HO UN PROBLEMA CHE MI TORMENTA!!!:
Ho cercato di risolverlo attraverso tutti i possibili interventi ma evidentemente o sbaglierò qualcosa o il mio è davvero un caso particolare!
Dunque, racconto la disgrazia:
4 giorni fa mi è venuta la "felice" idea di aggiornare il Sistema Operativo del mio Qtek 9000 che aveva Wm5. Ho scaricato un ROM ma ignaro del procedimento corretto ho aperto, dalla SD col PDA collegato al Portatile, il file EnterBL.
Conseguenza?!?!!?: à il Qtek si spegne e rimane nella schermata Boot con "Serial" e "v1.00". se lo connetto al PC Serial diventa USB.
(Ho tolto la spunta da activesync per il riconoscimento USB ma se il PDA è connesso in USB non viene riconosciuto dal PC)
Ho fatto tutti i tentativi trovati in rete.
es:
-Bootloader con le combinazioni di tasti reset ecc.--> NULLA!
-mtty---> NULLA!
(Ne ho scaricato 2 versioni: 1 non cita la porta USB, L'altra selezionado USB dice " PORT CAN NOT OPEN"!)
-dalla SD---> NULLA!
Aprendo alcune delle centinaia di ROM che ho scaricato, nel processo di ripristino non arrivo neanche allo 0% perché mi conduce a diversi errori:
-error 101
-error 114
-error 150 ecc.
Nell'Upgrade (che in realtà non riesce) compare una finestra nella quale dovrebbe risultare la Precedente e la Nuova ROM da installare...e pure qui tutti i campi sono vuoti!!!!
Anche se procedo poi risulterà: "RUU ha smesso di funzionare"!
booooooohhhhh!!!
Eppure ne capisco abbastanza di PC e Cel…Non so dove e cosa sbaglio!
Comunque il Sistema Operativo del mio Notebook è Vista
Inoltre ho anche un v1640 (cioè un Qtek Vodafone) preso come pezzi di ricambi non di natura elettronica; Su questo c’è il Microfono Rotto, l’insert della SD e l‘ lcd ha uno strano problema di immagine riflessa. Ho provato x curiosità ad aggiornare la ROM di questa è ci sono riuscito senza problemi.
Potrebbe però essermi utile per fare qualcosa tipo bypassarlo x il mio Qtek…??? ho pensato pure di mettere la scheda madre del v1640 nel Qtek ma non mi conviene per via di microfono e insert SD rotti!!!
Sono disperatooo…!!! Cerco qualche "santo" che con un po’ di pazienza riesca ad aiutarmi passo passo nella procedura!
P.S. Inutile rimandarmi ad altri post e topic perché li ho girati quasi tutti!
Grazie Infinite anticipatamente a tutti coloro che vogliano aiutarmi! [/size]
I think your problem is that you are using Vista for the ROM update and it is very difficult to do it under Vista. Try to do that on a computer using XP. I don't speak or write italian, so, cant be more precise or understand completely your problem to guide you better.
On users request: added English translation and reopened the thread.
Hi.
On XP or Win 2000
Open Active Sync
File -> Connection (Or something like that)
Disable USB Connection
Close Active Sync
Connect Universal with the USB Cable
Download this file
Unzip it
Run UNI_ExitBootloader.exe from your PC
Reset Universal
Hope it works out for you
thanks. I'm trying... But what ROM do you recommend me?!
Which is better? wm5 or wm6 ?!?!
bosjo said:
Hi.
On XP or Win 2000
Open Active Sync
File -> Connection (Or something like that)
Disable USB Connection
Close Active Sync
Connect Universal with the USB Cable
Download this file
Unzip it
Run UNI_ExitBootloader.exe from your PC
Reset Universal
Hope it works out for you
Click to expand...
Click to collapse
This Worked for me.
THnx Very Much.
I disabled USB connection.
I connect PDA with cable but "usb device not recognized" !
It's normal?
After I open ExitBootloader but "Cannot open USB port. Please make sure, that USB connection in ActiveSync is disabled.
Also make sure, that your USB cable is properly connected."
What do I do!?!?!??!
And you are using Win XP or Win 2000?
If your using Vista I really don't know how to do it.
yes yes!
Im' trying whit XP, too !!!!
Deactivate any firewall and antivirus.
Also read this http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader
I download Mtty but in the version 1.42 there isn't USB Port (only COM 1,2,3).
HELP! when I connect PDA by USB to PC the device is not recognized!!! why?!?!?!
anthouser said:
I download Mtty but in the version 1.42 there isn't USB Port (only COM 1,2,3).
HELP! when I connect PDA by USB to PC the device is not recognized!!! why?!?!?!
Click to expand...
Click to collapse
Check here: http://wiki.xda-developers.com/index.php?pagename=Uni_Stuck_Bootloader_Serial
Hope it helps,
anthouser said:
I download Mtty but in the version 1.42 there isn't USB Port (only COM 1,2,3).
HELP! when I connect PDA by USB to PC the device is not recognized!!! why?!?!?!
Click to expand...
Click to collapse
Are you connecting directly to usb or using a hub? Sometimes the problem is the hub.
still nothing! I tried in every way but on any PC when I connect whit USB my device it is not recognized!!!!
WHY????????????????????
HELP HELP HELP !!!
I tried also to connect with different cables and different PC's USB ports. Never whit hub. But still nothing!!!
There are some drivers to install to have the PDA knowed by PC as a simple data device???
Related
hi,
I have from few this device and problems already rise.
he has gone out from not very the update of the ita rom from 1.00.07 to 1.01.00.
the problem is that the operation doesn't work.
in the specific one happens how much it follows:
connection activesync ok, launching the prg of update, the current version and the future version he is correctly seen, but when it is selected before, after an instant of attended activesync it is disconnected, the system tries to establish a connection lan, but not succeeding suits us to abend, interrupting the trial.
if I have to be sincere, I didn't think about finding some problems of the so early kind and spore everything with hp.
has someone had the same problem??? has you he succeeded in resolving it???
thanks to everybody
[italian translate]
salve, ho da poco questo device e già sorgono problemi.
è uscita da non molto l'update della rom da 1.00.07 a 1.01.00.
il problema è che l'operazione non funziona.
nello specifico succede quanto segue:
connessione activesync ok, lanciando il prg di update, viene visto correttamente la versione corrente e la versione futura, ma quando si seleziona avanti, dopo un attimo di attesa si disconnette activesync, il sistema tenta di stabilire una connessione lan, ma non riuscendoci va in abend, interrompendo il processo.
se devo essere sincero, non pensavo di trovare dei problemi del genere cosi presto, e spora tutto con hp.
qualcuno ha avuto lo stesso problema ??? è riuscito a risolverlo ???
grazie a tutti
are you running Vista x64 or any other x64 OS ?
Try on XP 32bit, it will probably work
Ciao,
ho WM6.1 e non risco a ricevere file, quando dal pc mando un file via BT
mi appare che sul mio dispositivo (P3600) non ho il servizio di trasterimento files, stessa cosa quando tendo da un qualsiasi cellulare.
Come installo il servizio?
Grazie
Hello,
WM6.1 and I do not seem to receive files when the computer sending a file via BT
I get that on my device (P3600) I do not have the service Storeroom files, the same thing when going from any phone.
How do I install the service?
Thank you
up up up
ciao a tutti, innanzitutto complimenti per il vosto lavoro... però ora mi serve un aiuto.. non riesco a installare nessuna rom, avevo gia fleshiato una volta, ora monto la rom originale 2.03 con olinex 1.40 ma non riesco ad installare cmq nussun'altra rom.. connetto il pda, (DIAMOND) avvio Unsigned-Hard-SPL-Diamond-OliNex, arrivo alla schermata update e poi mi diventa lo schermo del tel tutto nero, activesinc si sconnette, la barra del pc rimane sempre a 0 e dopo un po di minuti mi da errore262... aiutatemi... anticipatamente grazie a tutti...
Google Translation" hello to all, first of all congratulations for the work vosto ... But now I need a help .. I can not install any rom, I had already flesh once, now monto la rom original olinex 1:40 to 2:03 but I can not install none rom cmq .. I connect the pda, (DIAMOND) start Unsigned-Hard-SPL-Diamond-OliNex, arrival to the screen update and then I become the screen of the phone all black, activesinc it disconnects, the bar of the pc is always a 0 and after some of I errore262 minutes from ... help me ... thanks in advance to all ..."
Maybe someone wanna take a crack at this.
hello and thanks for the help imatrix, I have done everything as the guide with matty but then I have the same problem ... 262 error .. instead if reinstalling the rom olinex 1:40 I upgrade succeeded. but equally I can not change a rom
which cooked have u tried to install?
how did you install it? via ActiveSync or Internal Method?
I tried to install any rom and I tried to install only with active sync, the other does not know
Ho bisogno di aiuto ... il mio htc rodio durante il caricamento di una ROM originale HTC branded TIM (operatore italiano) esegue continuamente colore dello schermo bootloader. Dato che l'aggiornamento ha dato errore 262 .. quindi pur avendo fatto hard reset del telefono sempre riavviare bootloader modalità a schermo tricolore. Non ho fatto il cambiamento fatto spl rimasto invariato .. non è cambiata (SPL 0.008.400) .. è sostanzialmente bloccato in modalità bootloader .. cosa devo fare per ripristinarlo. Premetto che: si collega in modalità USB, ma quando cerco di installare la ROM originale da errore 262 .. Mi sono bloccato .. Vi chiedo di contribuire a scusarmi per il mio inglese non molto leale.
This is not rom development...
Go into bootloader. Plug in you're usb cable and try to flash again.
perhaps I have not explained well or did not understand me ... maybe because of my broken English ... but the phone is stuck in bootloader mode, despite the USB connection can not load any room ... resulting in error 262 please help me ..
Sounds like you don't have HardSPL, so perhaps a warranty return is in order ?
sorry...but i have htc rhodium with spl 0008400 and not 085olinex because not is possible flash
I did not ... why not let hardspl ... error 262 ... should send it to HTC? ... I have not made any modifications to the spl ... can groped something?
I can not change software because it appears error 262 I tried installing the original ROM so this problem appeared but I could not change the rom
waitech said:
perhaps I have not explained well or did not understand me ... maybe because of my broken English ... but the phone is stuck in bootloader mode, despite the USB connection can not load any room ... resulting in error 262 please help me ..
Click to expand...
Click to collapse
time and time again - the mighty power of forum search can never be ignored
http://forum.xda-developers.com/showthread.php?t=425922
if you are not sure how to proceed - return the phone under warranty, you still have stock spl
Thread moved
I moved your thread to the correct forum.
Russ
restore the original htc desire to return under warranty
Hello everyone I need your help.
I'm Italian and I bought a htc desire no brand in store ...
I enabled root permissions .. rom installing so many compliments and are all beautiful.
But I want to know if I have a problem and would like to restore the operating system of my terminal to avoid losing the warranty how?
I had read that just download the ruu.exe of my terminal and everything would be restored.
But I just made a test returns me errors 170 and 171 ...
it is also impractical to me would you kindly run by a good guide for me as an incompetent
ripristino originale htc desire per rientro in garanzia
ciao a tutti ho bisogno del vostro aiuto.
Sono italiano ed ho acquistato un htc desire no brand in negozio...
Ho abilitato i permessi di root ..installando rom complimenti sono tante e tutte belle.
Ma desidero sapere se dovessi avere qualche problema e desidero ripristinare il sistema operativo del mio terminale per non perdere la garanzia come si fa ?
Avevo letto che basta scaricare la ruu.exe del mio terminale e tutto si sarebbe ripristinato .
Ma appena ho effettuato una prova mi restituisce gli errori 170 e 171...
essendo anche poco pratico mi dareste gentilmente un buona guida da eseguire per un incompetente come me'
see the link in my sig for the 2.29.405.5 RUU - boot up phone to the android OS - connect with usb cable to pc - run the RUU (right click and run as administrator on vista/7) on the pc and follow instructions (you need to be over 30% battery)
http://forum.xda-developers.com/showthread.php?t=869048
if you are still having problems with 170 and 171 there are some references to it here: http://androidforums.com/incredible-tips-tricks/161463-ruu-error-170-171-solution-windows-7-a.html
it might be worth grabbing the latest HTC Sync app and installing that if not already
also what OS are you running it from?
I find it easier to turn the phone on holding the back button to get into FASTBOOT, then connect to the PC and run the RUU - means you can do it with non-Sense ROMs too as you don't need HTC Sync
... thanks for your reply.
my OS and 'Windows Seven home premium
I managed to install the original ROM only. zip file from the site that I've reported.
ClockworkMod v.2.5.0.1 recovery was not uninstalled
this is correct or not
Following the other guide for the exe file I can not continue to give me error