Hello xda-developers
I have the HTC Touch PRO 2 (RHOD100)
But, i am really confused, is this the GSM or CDMA version?
Can i Hard-SPL my phone? Will 3G work after hard-spl'ing and rom flashing?
Best regards
Mikkel
who is your carrier, and what country.
Telia DK (Denmark)
Nobody who can help me?
Yep it's ok, you're GSM, CDMA version is for some North American providers, so you can use the GSM version, it won't do anything to your 3G or anything. Just allowing you to flash safely any rom.
Perfect, thanks...
I have a note II LTE with Bell (canada).
I thought it was a n-7100 and I installed a N-7100 ROM. It finds no mobile network and doesn't recognize my SIM CARD.
I think I have a SGH-I317M finally, so in what forum should I download a ROM? And will the modem be compatible with my region?
Thank you very much!
DanKicker said:
I have a note II LTE with Bell (canada).
I thought it was a n-7100 and I installed a N-7100 ROM. It finds no mobile network and doesn't recognize my SIM CARD.
I think I have a SGH-I317M finally, so in what forum should I download a ROM? And will the modem be compatible with my region?
Thank you very much!
Click to expand...
Click to collapse
I'm pretty sure the stock Bell rom and firmware hasn't be posted anywhere yet, but at least if you flash one of the AT&T roms it should get your radio working again. http://forum.xda-developers.com/forumdisplay.php?f=1874
does anyone know if I can install T-mobile firmware on my International N9005? I currently have T-mobile service but I'm not getting LTE speed and Wifi calling is not there.
May be a dumb question but since I see a different section for the T-Mobile variant, aren't they both the same unlocked version? So all ROMs from this section should work on the T-Mobile version right?
Anyone with T-Mobile on here flashing ROMs?
Most roms should be work t-mobile.I think only cdma phones will have issues.Im on at&t m8 and on t-mobile network.
Hello everyone,
I hope someone can help me.
I have an asian unlocked M8 and I live in Mexico so I cant use LTE. To solve this I got S-off, supercid, wwe mid and wwe firmware with Android Revolution Rom and still cant use LTE (Europe LTE bands do not include band 4 aws, so its the same crap). I tried to flash att and t-moble radio but mi phone did not recognise the radio file (Unknown baseband) so I get no signal. Then I flashed the wwe radio and got the same no recognition problem. The only way to get back signal is to flash again the firmware (it does not work to switch the att radio image in wwe firmware)
I need att or t-mobile bands to use mexican carriers Telcel or Movistar LTE (band 4 aws) and I guess I should use att or t-mobile firmware with the matching based rom.
- Can someone recomend me a rom version and firmware version to download??
- Is the unknown baseband problem because of the wwe mid? Should I also change the wwe to att or t-mobile mid and cid??
Thanks for your time and help!!
chortiman said:
I tried to flash att and t-moble radio but mi phone did not recognise the radio file (Unknown baseband) so I get no signal. Then I flashed the wwe radio and got the same no recognition problem. The only way to get back signal is to flash again the firmware (it does not work to switch the att radio image in wwe firmware)
Click to expand...
Click to collapse
What if you current firmware version, is it Euro 4.16.401?
Where did you get the AT&T radio(s) and what is the file name?
Are you sure you are using the baseband for the right Android version (4.4.4 or 5.0, etc.)? If you are using the wrong radio for the Android version, that is the only reason I can see for any problems. As long as you are using the right version (Lollipop radio with a Lollipop ROM, etc), the radios should be interchangeable (with exception of Verizon, Sprint, M8x, dual SIM - don't mess with those).
But I would still advise to flash the whole firmware (not just the radio) to assure that everything plays well together.
chortiman said:
- Can someone recomend me a rom version and firmware version to download??
Click to expand...
Click to collapse
I would suggest the Lollipop AT&T firmware (4.28.502) or Dev Edition (4.16.1540 - same band support as AT&T version) which you can get here (attached with the full ROM, unfortunately): http://forum.xda-developers.com/att-htc-one-m8/development/att-4-4-3-2-22-1540-3-debloated-sense-6-t2837365
After that, you should be able to use just about any Lollipop ROM for the M8.
redpoint73 said:
What if you current firmware version, is it Euro 4.16.401?
Where did you get the AT&T radio(s) and what is the file name?
Are you sure you are using the baseband for the right Android version (4.4.4 or 5.0, etc.)? If you are using the wrong radio for the Android version, that is the only reason I can see for any problems. As long as you are using the right version (Lollipop radio with a Lollipop ROM, etc), the radios should be interchangeable (with exception of Verizon, Sprint, M8x, dual SIM - don't mess with those).
But I would still advise to flash the whole firmware (not just the radio) to assure that everything plays well together.
Click to expand...
Click to collapse
Yes, my current firmware is 4.16.401.10
I got the radio images from here, but I certanly mixed basebands with android versions.
I will go with your suggestion of flash a whole firmware.
redpoint73 said:
I would suggest the Lollipop AT&T firmware (4.28.502) or Dev Edition (4.16.1540 - same band support as AT&T version) which you can get here (attached with the full ROM, unfortunately): http://forum.xda-developers.com/att-htc-one-m8/development/att-4-4-3-2-22-1540-3-debloated-sense-6-t2837365
After that, you should be able to use just about any Lollipop ROM for the M8.
Click to expand...
Click to collapse
Can I flash this firmware with another rom, say INSERT COIN? I read in the ROM instructions to use 4.16.401.10
Can I use the ROM attached to the firmware you suggested with my local carrier?
Thank you again for your help.
chortiman said:
Can I flash this firmware with another rom, say INSERT COIN? I read in the ROM instructions to use 4.16.401.10
Click to expand...
Click to collapse
As I said, the firmware can be used with most any Lollipop M8 custom ROM.
The instructions say you need 4.16.401 firmware, but that's just a "lazy" requirement. Any Sense LP firmware should work with the current InsertCoin. To be fair, many of the "international" devs are Euro based, so they have little or no experience with other region's firmwares; and don't want to be held responsible for issues that arise for using them.
You should use or select the firmware based on region and carrier band support (in addition to Android version); not by ROM.
chortiman said:
Can I use the ROM attached to the firmware you suggested with my local carrier?
Click to expand...
Click to collapse
You can. I'm personally not crazy about AT&T specific "features" (as the ROM is meant to include). Even having AT&T as a carrier, I tend toward the non-ATT based ROMs.
You may need to manually enter your carrier's APN info to get data connection.
Perfect.
I am currently in my work but at night I will follow your suggestions and come back tomorrow -or as soon as posible- to inform if this worked and may be useful to someone else.
Best regards!!
chortiman said:
Perfect.
I am currently in my work but at night I will follow your suggestions and come back tomorrow -or as soon as posible- to inform if this worked and may be useful to someone else.
Best regards!!
Click to expand...
Click to collapse
Hi, did you solve it? no luck here.
elpicard said:
Hi, did you solve it? no luck here.
Click to expand...
Click to collapse
Hi,
I flashed succesfully the att latest firmware, but it is the same, no LTE signal.
I recently found this posts to UNLOCK QUALCOMM BANDS and I tried to follow the steps to do so, but they are very unclear and I got stuck in step 3.
I wanted to come back to this post to share a solution, but i cant find it. If you can complete the guide, please share your results.
Best regards.
chortiman said:
I flashed succesfully the att latest firmware, but it is the same, no LTE signal.
Click to expand...
Click to collapse
Check your APN, sometimes carriers use a different one to support LTE.
Otherwise, if you tried only one firmware (such as AT&T) then try another: T-Mob or Dev Ed all supposedly support AWS.