Develop Bugs

WM5 Dailerskin on WM2003SE..?

Hi All,
Here's a quick question to all in the know!!
Can you use the WM5 Dailerskins on WM2003SE..? I feel that STD Dailerskin used on i-mate BAs a little boring..
Either that or anyone got any other suggestions..?
Many thanks for a Wonderful site - If only I knew more to share back into it!
Cheers,

no way man,
but i said it already in the posts a couple of times that it will not work.
wm5 has no dead button anymore in the dialerscreen. (big improvement of wm5)
settings are totaly different between the versions.
If you want to use them u need definitly wm5.
And soon hopefully we can skin much more....

Thanks Pimbo - I've upgraded a couple of times but have always downgraded again.. This has mainly been due to the compatability between Windows 2000 Professional at work (where the BA is most useful) and WM5..
Then there's the issue of Tomtom 5 and WM5 (Which wouldn't be a problem if I had a "proper" version!) :lol:
So - I throw this out to everyone.. Can anyone show me a decent WM2003SE dialerskin that is not the standard T-Mobile or as is my case now, i-mate!
Many thanks to you all!

Static on ALL calls

Hey ---
can anyone help me with the static I have on my calls? here are my specs on the 8525 I have...
ROM: PRO Black 2.5
ROM Date: 4/17/07
Radio: 1.41.00.10

Is it static, or does it sound more like slight distortion?
If distortion, I've had this problem on EVERY HTC phone I've had (4 and counting). I just got my Dash (s620) so it hasn't happened on that one YET, but I expect it to happen any day now.
I've had the carrier (TMO and Cingular) replace the phones I've purchased from them. My TyTN, well, I haven't been so lucky. At least it isn't so bad on my TyTN. My SDA was the worst!

I have noticed this problems too...from the latest versions of WM6 (Black 2.5, dutty`s version, CUSTEL version and latest build of LVSW)...haven`t noticed this before so I think maybe the cause is the radio ROM...will try to downgrade to see if there will be a difference...
Regards,
Primoz

Its def static and yes right after I did the whole WM 6 upgrades --- anyone know how to downgrade to the newest Cingy ROM?

If you were able to upgrade...you should be able to downgrade...just look in the wiki or try the MrVanx upgrade/downgrade guide...
regards,
Primoz
p.s. Let us know if the downgrade will help to solve the issue!

vp3G 3.0 glitch with QWERTY PAD

Does anyone know if there is a solution to this problem? I flashed my 8525 with the vp3G 3.0 but now when I'm using the phone, the mapping of the qwerty pad seems to change to the numbers and symbols, and you cannot type letters. Does anyone know a fix?

oh shiitt!

noticed same thing. gets annoying coz i have to type with onscreenkeyboard or phonepad if im on the phone and textingg at the same time

I know that it is not a problem with just my phone because I have a friend who flashed his phone with the same vp3G rom and he experienced the same problem.

does any of the other WM6 "officiial" updates experience this same problem?

This has already been brought up in vp3Gs 3.0 Rom thread!
http://forum.xda-developers.com/showthread.php?t=317952
Just click that ^ link and do a search on that thread only for information on this problem.

I loaded the vpg 3.0 at&t official and did a soft reset before the extended rom loaded. When I did this the numbers and symbols were maped wrong. I then HR and reloaded vpg3.0 and let the extended rom load. Problem solved for my 8525.
Oh yeah later I saw the HTcustom program under Programs/Accessories/HTcustom, and there is a tab for keyboard where you can select Cingular. I didn't need it since the extrom loaded, but you might want to try and see if that helps.

go into registry edit. hkey_local_machine\software\oem\qwerty
edit layout value to either hex:40409 or dec:263177

Nope, no PROBLEMOS with the original one. Neither with the Schap's version.........
Good luck!
p.s. there is a WIKI.......

The straight scoop
OK people, time to get the facts straight on this.
The issue the OP refers to is NOT the same as the issue whereby special symbols are incorrect on the Cingular/AT&T 8525 without the proper OEM\Qwerty setting.
The issue the OP refers to is this: While in a call, the numeric hardware keys are locked as such and are unusable as letters in applications such as SMS.
With mviana's help (and a crapload of flashing various ROMs on his part), we have determined the issue is NOT limited to my ROM. It appears to have cropped up with the latest "official" builds, starting with the Dopod 3.54 release and includes the AT&T 3.57 release (upon which vp3G 3.0 is based, of course).
That said, it has very clearly not affected everyone as on several occasions I have observed posts from two people running the same ROM -- one says he has the problem and the other says he doesn't. Even within this post Bensat noted he has no problem with the HTC or schaps, however posts can be found to the contrary.
I'm still gathering info on this, however I'm beginning to believe it may be germane to certain Hermes models -- specifically the Cingular/AT&T 8525 (aka Hermes 100). We may note that Bensat has a TyTN (aka Hermes 200).
One thing's for certain: It's not an evident nor "easy" fix.
EDIT: Found a TyTN that has the problem with the "official" AT&T (and mine).

Why bother to open a new thread for the issue taht suppost to post in VP3G's thread? Read my avatar <---------

Okay, quick question. Has at&t actually released an official wm6 upgrade for the 8525?

nope. and when they do "officially", not like "officially" as in "officially on this board" but as in "officially, and warranty supported by ATT", you will find it HERE: http://www.america.htc.com/support/8525/software-downloads.html

Wonder what's taking them so long to release it :\ (Sorry to trail off OP's topic)

New to HD HELP!

Hi,
please help an HD newbie...
I like the standard TouchFlo on my, more or less, still standard HD but would simply like a plain black background on all the Tabs/Pages or whatever (The home/weather/ music etc ).
Can anyone give me a simple cab or something equally straighforward to do this?
Also, I have a different contacts program running (funcontacts) It is called fine when I call it from contacts via phone etc but NOT from the People tab, All People button. How do I get my HD to do this please.
Any help much appreciated!
Operator 34.119.1.611 (orange)
Rom Ver 1.19.61.1 WWE
Rom date 11/25/08
Radio 1.09.25.14
Protocol Ver 52.49a.25.26U

scottmo said:
Hi,
please help an HD newbie...
I like the standard TouchFlo on my, more or less, still standard HD but would simply like a plain black background on all the Tabs/Pages or whatever (The home/weather/ music etc ).
Can anyone give me a simple cab or something equally straighforward to do this?
Also, I have a different contacts program running (funcontacts) It is called fine when I call it from contacts via phone etc but NOT from the People tab, All People button. How do I get my HD to do this please.
Any help much appreciated!
Operator 34.119.1.611 (orange)
Rom Ver 1.19.61.1 WWE
Rom date 11/25/08
Radio 1.09.25.14
Protocol Ver 52.49a.25.26U
Click to expand...
Click to collapse
The cab below should give you the same background image across all TouchFLO tabs. Install it and soft-reset. As far as I know you cannot re-map the "All People" softkey from the People tab...

Thanks
Thanks CW,
Going out for an hour but I'll try when I get back. Thanks again,
Scott

No Go
Thanks CW but I'm afraid it only partially worked. All the tab screens went black but the ino at the top of each went really weird and cr*ppy!
Anymore ideas anyone please.

scottmo said:
Thanks CW but I'm afraid it only partially worked. All the tab screens went black but the ino at the top of each went really weird and cr*ppy!
Anymore ideas anyone please.
Click to expand...
Click to collapse
I should have looked earlier at what rom you are running. You have quite an older version of TouchFLO in your rom. The cab I posted was intended for a much newer one. That's why it didn't work as I described it would. You could look into Maxycy's software to customize your TouchFLO. Other than that, I don't know what else still supports the older version.

Stupid question?
Why is it an old ROM in a brand new phone?
Shouldn't it be bang up to date? I had to wait for delivery because they were waiting for 'new' phones!
Am I just stupid?

scottmo said:
Stupid question?
Why is it an old ROM in a brand new phone?
Shouldn't it be bang up to date? I had to wait for delivery because they were waiting for 'new' phones!
Am I just stupid?
Click to expand...
Click to collapse
No, HTC / the vendor is. Said you had a 1.19.xxxx rom when they have up to 1.59.xxxx released now. You should look into updating it. Are you interested in custom roms? If not, you should still look into updating to the latest official rom

in fact even the most recent stock roms (provided by operator) are often outdated compared to the roms you can find here (@xda)
they are mostly based:
newer builds of wm6.1 or wm6.5beta
some parts from other (newer) devices
optimzed and customized by the authors
i suggest you to read the hd section to see what u can do with your phone

Will do guys, thanks.
BTW, got my black screen on all tabs! Just had to do a bit of work and use Manila Editor. I will take a look at custom ROMs but they scare me
Maybe I'll pluck up the courage, just worried I'll brick my device!
Thanks again.

scottmo said:
Will do guys, thanks.
BTW, got my black screen on all tabs! Just had to do a bit of work and use Manila Editor. I will take a look at custom ROMs but they scare me
Maybe I'll pluck up the courage, just worried I'll brick my device!
Thanks again.
Click to expand...
Click to collapse
Flashing is easy if you are well informed beforehand. Just do the research before you flash. Read the Wiki and my guide on flashing roms. Links are in my signature.

[Q] Mailpreview Touch Flow or MS 3.5

Hello,
hopefully somebody got a registry twaek or anything that make
it possible to use the mail preview in TouchFlow or MS 3.5 in
combination with BBConnect.
Right now in both programms it is only possible to see the header
of the mails. Well that´s a little bit frustrating, because it makes
it impossible to use the preview function, and you still have to
oben the mailreader programm.
Thanks for your reponse.
Howie 1969

Hi Howie,
I have been using various versions of BBConnect on various handsets for about 4 years now. I'm afraid I have never seen a solution to this. I would like to be able to delete the emails from the Touch Flo screen using a soft key without having to open them anyway. BBConnect is an apauling programme and causes lots of bugs. Your one is just one of them!

Hi Mitsi,
thanks for your feedback.
Just to your point, within MS3.5 it´s possible to delete an mail
with "two clicks" without open the original mailprogramm.
Well, from my point of view, since it is a problem that comes up
in TFD and MS3.5, i believe there must be a solution.
It seems that both programms are using a procedure or whatever
that is similar in both programms. ( Hey sorry, i´m not a programmer)
From my point of view it must be possible to trace that back.
But to be honest i don´t know how, if somebody could point me in the
direction i would try it. But hopefully there are more experienced guy´s out
there who knew how to do that.
Is there somebody ???
Okay, maybe this way works, if somebody will provide a solution,
we can talk about a reward - 10 until 15€ ???
We will see.....

Wiling to donate also...
Bump.

Hi everybody,
just to bump it up again, maybe one of the dev´s has now a solution
on that matter.
Reward is still open

Hello,
bump it up again, still hoping somebody got a solution and is going to get
the reward
Yet another questition, since i´m running on the stock rom (german ),
could give me somebody a hint if the mailpreview will work with sense 2.5
or maybe with a "cooked" rom.
Would be great to get at least a feedback, if that will be a way,
that i could follow for a solution on this issue.
Howie1969

Hello,
bump it up again, still hoping somebody got a solution and is going to get
the reward
Yet another questition, since i´m running on the stock rom (german ),
could give me somebody a hint if the mailpreview will work with sense 2.5
or maybe with a "cooked" rom.
Would be great to get at least a feedback, if that will be a way,
that i could follow for a solution on this issue.
--> I won´t give up, since i´m still hoping there´s a solution out there
Howie1969