HTC P3300 only green display not getting ON
You have a dead Main Board, ship device for service. It's OMAP CPU fault.
Regards
GSM Coolhawk said:
You have a dead Main Board, ship device for service. It's OMAP CPU fault.
Regards
Click to expand...
Click to collapse
thanks for reply i dont have the dead board . If u have schematics of this please upload
Related
Good morning I have a bricked XDA 02 (HTC Wizard), after a tentative of rom update. Now is dead compleately (doesn't switch on). The only way to solve the problem is the Jtag programming of the processor. I'm looking for the correct JTAG pins, but anyone have traced it till now. I have dismounted the brick and I found a strip on the left side of the board, can anyone tell me what it is used for (picture 2 and 4)??? Can anyone tell me if I can found the JTAG points under the soldering below OMAP processor? Does anyone have the OMAP 850 datasheet? Are the pins close to sim connector useful for what I'm looking for? Thanks to anyone that want to help me...
hi
me and some guys we are working finding that pins for reflashing
join us in thread (dead wizard , never let's revive) to continue it
i attached many important pic in last page , so take a look
Mr. Morfeo said:
Good morning I have a bricked XDA 02 (HTC Wizard), Can anyone tell me if I can found the JTAG points under the soldering below OMAP processor? Does anyone have the OMAP 850 datasheet? Are the pins close to sim connector useful for what I'm looking for? Thanks to anyone that want to help me...
Click to expand...
Click to collapse
See here: http://pda2u.ru/forum/index.php?showtopic=301
Was it really necessary to point to a russian topic?
In the first post I just want to salute all users of this forum and I hope to help me to solve the problem with a HTC P3300 that is dead.
The phone was dead when I get it and I so there is no suffers mechanical shocs or to be damaged by water or something liquid.
When I conect it to a power supply and push power on the device start consuming about 110 mA and just stay in that mode.In other devices the problem was solved by replacing the quartz that gave the tact frequency to CPU or by resoldering the CPU.With this I've made both things but no way to work.If someone had this problem before I just want to tell me how did solve it;where can I found it's diagram schematics or a service manual.Can be this a software problem and possible need to flas it via jtag procedure?
Thanks a lot and I hope to repair it!
After a few hours of work on it I succed to make it working.The problem was from flash chip(resolder it and it's OK).I also find a service manual for it but it's not good(it show how to assembly/dissasembly the device).
All the best!
Hi there..
nice thing if you can make this work...
I have brick of artemis and I think it is software problem..as you said.
is there instruction how to do it?Or how much you charge for it?
cheers
Z
If it's a software problem here are tutorials on how to fix it;if it's hardware You must have have experience to work on this kind of phones.
Good Luck!
MarianG said:
If it's a software problem here are tutorials on how to fix it;if it's hardware You must have have experience to work on this kind of phones.
Good Luck!
Click to expand...
Click to collapse
Hi!
Could you please give us the tutorials? A friens has bricked his Artemis and I would like to try to bring it back.
Hi guys!
Few days ago my diamond was dead
Today the man of the assistance center tell me the motherboard is damaged
how it's possible?
and how i can damage that?
pls someone tell me something about it and where i can buy a diamond's motherboard because i would continue my project of my ROM
send it to HTC service center. Mine was damaged to suddenly after soft reset. They replaced it....
i have a custom rom and hardspl on my phone it's equal?
does not matter (if the Mother board is faulty)...
Htc desire is now completely dead
Not Turning on
Not going in Hboot
Not going in Fastboot
Not charging
What can i do now?
Any one plz help me :crying:
Sameer Shahbaz said:
Htc desire is now completely dead
Not Turning on
Not going in Hboot
Not going in Fastboot
Not charging
What can i do now?
Any one plz help me :crying:
Click to expand...
Click to collapse
Buy a new/second hand motherboard. Ul get a broken desire off ebay for cheap. That reminds me i must get 1 too
Hello, I have a HTC Desire HD phone and it doesn't turn on, but when I try to connect it to PC, it installs qhsusb_dload driver [but always failed]. How can I fix this phone? Is it possible?
You need a USB jig. I'd say its a dead phone, usually an eMMC problem.
"Two types of people: Those who buy iPhones; and those who are intelligent. I'm intelligent."
- Guy
GuyInTheCorner said:
You need a USB jig. I'd say its a dead phone, usually an eMMC problem.
"Two types of people: Those who buy iPhones; and those who are intelligent. I'm intelligent."
- Guy
Click to expand...
Click to collapse
Thank you sir, but what should I do? will I be able to fix it or should I bring it to a service centre?
danielstar13 said:
Thank you sir, but what should I do? will I be able to fix it or should I bring it to a service centre?
Click to expand...
Click to collapse
Service centre. Say you left it on charge overnight and it didn't boot in the morning. They won't fix it if they know its been tampered with