Hello, I have some problems with my BA:
- when I'm calling someone or someone is calling me, we can't hear each other.
- when I plug in my headsets there is no sound
I tried to change OS (WM2003, 6.1, 6.5) and Radio (1.12, 1.13.10, 1.15) without any luck.
But i noticed something: when I'm charging my BA I can hear calls and my headsets are working well. Any suggestions?
mine did this when i used to charge via usb. had to let battery die and then charge from ac and worked fine
Tried several times without success. Any other suggestion?
Related
As everybody know, its quite annoying use Universal as mobile. then, i decided to start to use the Bluetooth headset!
But doesn't work all the time.
If i set one headset, it works fine for few hours, then, after a while, without any message, bluetooth in my Universal turns off it self!!
At begin i though that would be my headset, then i tested with my other headset, and is the same!
Beside that, when i try to pair it them once more, it has static on it.
So, to be able to use it again, i need to:
- Remove device in my bluetooth list
- restart headset
- Search for device once more
And then, it works for a while again.
Well, i have tested in two headset over here, The Dopod H1 and Targus.
Does anybody knows what is going on or had same problem?
Thanks in advance!
Same here
I have experienced the same problem with my JasJar. The bluetooth radio seems to turn itself off from time to time. I think it is somehow related to WM2005, because I had the same issue with a Himalaya running WM2005. What is weird is that the blue light continues to blink. If you go to the wireless manager applet, it sometimes shows the bluetooth as on and sometimes as off, but if you go to the bluetooth setting, it shows the radio as off.
Any suggestions?
TIA
Panabax
Buzz_lightyear may have the solution here: http://www.buzzdev.net/index.php?option=com_content&task=view&id=60&Itemid=41
I'm trying this at present. BT stayed on overnight, despite very low battery, and I'll put it into use all of today. If I go a full day without losing BT then it's solved for me cos I was losing it ALL the time 2 days ago.
Hmm, I had a better day with this reg hack - but I did lose BT once. SO, inconclusive at present.
Guys - I have searched the whole internet and can confirm that there is a problem with the ROM
Until it is fixed Bluetooth will not work as it should
This is a problem i had with original jasjar rom (september 2005). First official upgrade and all subsequent roms have solved this problem. I'm actualy using helmi's aky 3.5 1.3.1 and sony hbh660 dayly without any problem.
I'm on my second Dash because I thought that it was a hardware problem. However, my sound will randomly quick working after a few days or so (could be as many as 5 or 7 days). The phone works, but if you make a call, you can no longer hear it ringing. No sound is played through the media players and the system sounds won't respond. A reboot always fixes it, but it is still annoying. Does anyone know what process/service controls the sound in WM 6.1?
This happens in both the Kavana and Ricky ROMs.
Am I the only one?
I *might* have figured the problem out: bluetooth.
It's like my bluetooth isn't releasing my sound output BACK to the speaker at times. I cycled the bluetooth service off/on and the sound came back. Keep in mind that I am running the "Jetware Mobile" bluetooth extension (it allows my phone to correctly connect to my car's bluetooth system).
Perhaps it is the Jetware utility, perhaps it is still the bluetooth stack on the phone. I'll keep everyone posted as to my findings.
Sorry if I'm posting a question that's been answerred before, but I haven't been able to find a thread to this problem:
sometimes my Nokia BH-102 will disconnect in the middle of a conversation in the car. The only option at that time is to pull the TP2 from it's holder and put it to my ear.
Whether it's the headset or the phone, I don't know, but it used to work in combo with the old Nokia E60 I used to operate......
Chances are it's the TP2, but how to fix it?
Only 'tweak' was to install tomtom, but without the 2 dll's which have been causing some problems.
Has anybody experienced anything similar?
Bluetooth visor problem
I have had problems with my headset - Supertooth Visor One Bluetooth Car Kit. Not quite the same as you though - the problems I have is that when I make an outgoing call, everything works fine but when I recieve an incoming call the audio stays on the handset rather than coming out of the bluetooth headset - which means I have to pick up the phone. I also have installed TomTom 7 and I had to do the 2 dll fix as my bluetooth was completely broken otherwise. So I guess maybe TT7 is responsible in some way. Only thing is, I dont want to do a hard reset to find out!!
I'd already read about the Tomtom BT-issue so I cleared the 2 dll's out of the cab prior to installation.
So the originals should still be in use. BT is/was working and I have been synching using BT. That's not the problem.
There should be threads out here pointing you to the original dll's. you could past them over the current ones and see if it helps.
I experiencing the same problem, and didn´t install tomtom.
So now it looks like it's a problem in the TP2 then.
Hopefully a BT-guru can investigate? This is way beyond my capabilities.
In the meantime I'll know what to do if and when it happens: take a chance on the cops seeing it and issuing a ticket.....
I'm having a similar issue, my headsets plural, have this problem. It will disconnect but what is happening is the headset is shutting down. If I hold the power button on the headset it comes back on and will work again.
If it was one headset I would think it is faulty but I've had this problem with three headsets and the Bluetooth in my car.
Is it possible that the phone is sending a shutdown command? BTW I am using the stock TMOUS 6,5 ROM and have tried some of the cooked ROMS with the same effect.
Yesterdaty I updated to WM6.5 and now try to get everything working again. Somehow my TP2 won't pair with my bluetooth carkit anymore. With WM6.1 this was no problem. The phone still pairs perfectly with my computer (also bluetooth connection) so I think the bluetooth connection is ok.
When parining to my carkit it finds the device, then I have to enter a password on the TP2, and after that it just sais "pairing connection failed", and it will not work. I am sure the password is not changed since yesterday. I tried it several times. I do not know what to do anymore. Could this be a setting somewhere? I get the feeling my password is not send properly but have no idea.
Meanwhile I tried pairing my carkit with another phone and no problems there. So my conclusion is: something has changed with bluetooth, updating to WM6.5 which makes it now impossible to pair my TP2 with my carkit.
Is there maybe a programm for the TP2 which give me more controll over bluetooth (like maybe go to an older standard)?
I have exactly the same problem as you
good to hear I am not the only one. Hope someone will come up with a solution for this.
I did nor observed any issues when pairing my TP2 after reflashing to WM6.5
There is another issue however - I can not hear any voice until it is charging.
Unplugging of the charger fixes this issue immediately. Horrible...
Seems, HTC guys are saving money on testing by using us as Beta Customers.
Would a custom ROM be a solution for us?
I updated to the "energy 6.5.1 rom" and guess what..............
The same problem. The rom is very nice, but my TP2 still won't pair with my BT carkit which is very big problem for me.
Is there maybe a way to downgrade just the BT part of a rom to WM6.1. I read on different forums there is something that is called a BT stack. Could this be the problem?
I have a ton of problems with bluetooth pairing now. However, I don't know whether it's the fault of 6.5 or the Tilt 2. Here is what I am experiencing...
- On car deck or headphones, the skip buttons don't do anything
- on car deck or headphones, I have to disconnect Stereo Audio and then reconnect to actually get sound. It NEVER works when it auto connects.
- Music will do a brief skip when you shut the screen off
- Stupid message about volume control every time it connects (resolved by switching to custom rom)
- SMS or any kind of alert tone now turns music way down so that the tone is the only thing you hear. Which is super awesome when I'm driving my drunk friends around and they are singing along to a song when suddenly it mutes so everyone can hear my incoming text message.
Not a single one of these issues existed when I had my Fuze.
Same here
My bt headset (sony hbh ds970) and simply does not find the pairing...
I asume is a problem related to energy´s ROM
orb3000 said:
Same here
My bt headset (sony hbh ds970) and simply does not find the pairing...
I asume is a problem related to energy´s ROM
Click to expand...
Click to collapse
No I do not think so, because I used the official WM6.5 with the same problem. Does someone know a way around this issue. I strongly believe that if only I could pair I have some options to work with it (in 6.1 it worked like a charm). If I only could pair without having to send the passkey it would be great step forward. I presume with sending the passkey, the bluetooth of the TP2 sends out other "rubbish" that confuses my carkit.
My problem is solved and guess what, it had nothing to do with my TP2. The problem was my carkit. It has a maximum number of bluetooth devices (5) it can pair to and the last one (the WM6.1 version of my phone) had been reached. So a hard reset on the bluetooth carkit and the problem was solved.
Well, at least I now know how to flash a rom to my phone and I think I learned more about the phone reading through all the forums. Thanks all for thinking with me on this problem!
Does anyone else still have this problem?? I have removed all the devices from my car and continue to have the same pairing error just after entering the passcode. Stock Spint ROM worked great, but multiple 6.5 upgrades don"t pair..............suggestions/ideas??????
bluetooth settings, advanced, enable beam data exchange,check the box
Interesting.....I actually found a fix. Instead of pairing the phone with the car, I paired the car with the phone. I didn't even know that this was possible, but it did the trick!
Hi Everybody,
I am having a strange problem:
I have several BT headsets connected to my phone. There is a JABRA Halo at home, a JABRA PRO at work and a CarKit in my car.
On every device I get connection drops on phone calls. I initiate the phone call and in the first 10 seconds everything is ok. Then the other party cannot hear me any longer.
If I switch to speaker and back to BT everything is fine for the rest of the phone call and in a time after the call for all further phone calls (it think if the phone is not going to standby in the meantime).
This happens with all ROMs I used. Original HTC, LeeDroid, ARHD, Beta 2.16 ROM. It happens also with all BT devices.
This is very annoying as I use my phone for business.
Does anybody have had a similar issue? Any solution?
Regards Frank