Hey.. kan anybody help me?. My P3300 goes black several times a day?? i have flashed it back to its original ROM to check if that would help, but i didn´t.
The phone just goes black and i cant turn it on again without soft-resetting it. Sometimes the screen flicker and some stribes are showing across the screen before it turnes black??
I hope you can help me
Best regards Michael
i had the same problem, i send it to repair by t-mobile and they changed the lcd screen problem fixed
Seems to be a common problem, as I have exactly the same with my P3300. Send and email to the HTC customer support to ask if it could be a software issue (no reply yet) - but now that I read this post I guess I can send my device for repair right away...
I don't think the LCD is to blame for this issue. (why would the phone firmware "crash" - and unable to reboot ? )
@MicTh : those updates you've installed ? were they recent Mobile6 (B&B > 4.1, Vanilla 2.0,.. ?) from this board ?
I've got the same problem, T-Mobile replaced my handset twice (new IMEI) - reason "motherboard replaced" ???
I DO believe that USPL unlock is causing this problem now - too many MDA 3c's failing - while HTC 3000 / Orbits seem to run fine.
No.. I run the original WM6 ROM
No.. I run the original WM6 ROM, and I have also switched back to the one it came with, but i does not help
I'm getting this problem too... screen fades to black, and only way to re-start is to soft-reset. I have had two new motherboards in my original, and now HTC have replaced with a new unit, with factory WM6 and problem is the same. I was wondering if it was anything to do with software, as i do have a number of applications installed - but which one is to blame?
After I removed Spb Time, my P3300 works fine (for a week now)
pnyg
do I have sbp time? (is it "standard" or 3rd party s/w?) if I do, how do I remove it?
no, I've not got spb time, so its not that in my case....
I also experienced this problem when I installed Meschle 3.01 ROM. Cant remember if its vanilla or full version as I installed both.
I am now back to Original WM6 WWE from HTC. No problem at the moment.
first hang-up end with black scream
I have the same problem..I think
started with WM5 ..but even with WM6 is the same!
Problem description:
first of all app is hanging (ones a week)
first time rest ,its trying to start windows but will hang-up by start-up windows
second rest hangs on white scream (with WM version number)
further resetting doesn't help
white scream changes to black (some times in columns) and them totally black
some time the black scream is flashing
can any one help me?
i don’t know what to tray anymore? I think is some Hardware issue?
hang-up and later ended with black scream
I have the same problem..I think
started with WM5 ..but even with WM6 is the same!
Problem description:
first of all app is hanging (ones a week)
first time rest ,its trying to start windows but will hang-up by start-up windows
second rest hangs on white scream (with WM version number)
further resetting doesn't help
white scream changes to black (some times in columns) and them totally black
some time the black scream is flashing
can any one help me?
i don’t know what to tray anymore? I think is some Hardware issue?
I've had at least 3 separate P3300s with this problem. I'm sure its a hardware issue, and I have finally persuaded my supplier to refund 75% of my purchase price, so I can buy something different. I am sure HTC must know this is a problem, but the uk repair centre seem unable to fix it, presumably as its a batch problem, and all the boards they have are faulty.
i have exactly the same problem with my Dopod M70 (Artemis300). Maybe it have some problem in the motherboard design which HTC should let us know
My orbit do the same, when it boot win everythink is working fine. Someone did say: When you apply pressure, it fade to black. I think it maybe have something with the housing design or battery.
keckek said:
i have exactly the same problem with my Dopod M70 (Artemis300). Maybe it have some problem in the motherboard design which HTC should let us know
Click to expand...
Click to collapse
I think i solve my own problem, after hours, i found out when we press in the back phone, near the display cable position, the screen become black and hang immediatetly. so i try to open back cover, remove cable and motherboard. Use alcohol to clean the contact display cable then put its together. Tighten motherboard, and wow, my Dopod M700 are back to life again, now how hard i press, everything stay fine. No strange behavitor for 5 days. GREAT!!!
Hope everyone think my experience useful
Sounds great but...
Hey.. sounds great.. but i´m affraid to take mine appart.. i think it is very difficult to take the cover appart without ruin it
MicTh said:
Hey.. sounds great.. but i´m affraid to take mine appart.. i think it is very difficult to take the cover appart without ruin it
Click to expand...
Click to collapse
No it is easy(much easier than TyTN) to open Orbit/P3300, you have intructions in the wiki. First you check if you have right tools...
igord said:
My orbit do the same, when it boot win everythink is working fine. Someone did say: When you apply pressure, it fade to black. I think it maybe have something with the housing design or battery.
Click to expand...
Click to collapse
That's probably me from this post?
http://forum.xda-developers.com/showthread.php?t=290414
I find that if you apply pressure on the outside casing at approximately where the simcard would be it switches itself off....
Yes it's your post. I have same problem. My orbit is working fine all day, but it is on the desk, didn't touch it. I bought P3300 housing, so I will change it, maybe it fix a problem.
* Pardon by my English, I am Spanish.
I have been taking with my 3300 several months and until for days all good.
Then, it was happened to me to put a ROM to him in English, concretely this:
ARTEMIS VANILLA 4,01 WWE ROM - WM 6,1 End 5.2.19199
And from to me it remains blocked there with much assiduity. The congealed screen remains totally and no longer it responds, or they begin to stump the colors and finishes the screen with rays or in black.
It passes so much in the S.O. as in the starting screens, it is more, there is times that nor start, is as if it remained without battery, but or I have proven with 2 batteries and happens the same.
To somebody has passed him this?
It has given the chance that right the day that I updated the PDA to the ground shut up, but nothing broken at first.
Some idea?
Thanks!
Did You Unlock CID?
step by step flashing method - spanish
LostLarry said:
* Pardon by my English, I am Spanish.
I have been taking with my 3300 several months and until for days all good.
Then, it was happened to me to put a ROM to him in English, concretely this:
ARTEMIS VANILLA 4,01 WWE ROM - WM 6,1 End 5.2.19199
And from to me it remains blocked there with much assiduity. The congealed screen remains totally and no longer it responds, or they begin to stump the colors and finishes the screen with rays or in black.
It passes so much in the S.O. as in the starting screens, it is more, there is times that nor start, is as if it remained without battery, but or I have proven with 2 batteries and happens the same.
To somebody has passed him this?
It has given the chance that right the day that I updated the PDA to the ground shut up, but nothing broken at first.
Some idea?
Thanks!
Click to expand...
Click to collapse
Hi LostLarry,
I made a translation few days ago, so here you are a step by step guide by Dzim,
Hello
I am new here . I found Qtek 9090 PH20B. At the begining it have got problem with alignate screen ... I have try everithing but always stuck on this screen... Put WM 6.5 WM 2003 Romupdate everithing but still not work i think this phone is broken that is probably why i found it .. : ( on the left of display is little crap but i think its only glass to protect displey ... i think i am at end i have no ideas ..
some information i have serial/usb 2.06 its Qtek 9090 PH20b
if someone have some ideas to help me i will be very glad : )
i know my english is horrible
bye Henco
Hi,
maybe your touchscreen part is broken.
what kind of crap on the left side of the display?cracks?
its better to take your phone to a repair center and let them check it for you.
yea i think this is last thing to do
this crap is on the left up corner about 3 cm but you can normal touch screen and this alignate cross i dont thing it is problem with this crap but nobody know it i will see in reapair center
thanks
Hi,
Sorry for bad english (from holland)
Few weeks now when I call connects my screen will go out/off.
I cannot get it on.
Normaly the light sensor workt.
Now the screen is off and cannot get it on.
Maybe someone can help me.
Thx Leenroc
no one same problem?
Hello,
I had the same problem with my TP2 (dutch version). It appeared with the Energy Rom 24 july reference rom in combination with overclocking. It is probably just the OC wich made it so.
Do you have your device OC'ed? If not, have you tried a hard reset?
Grtz, FeareX
I havent overclocked my device.
Yesterday i installed serveral energyroms.
Al have the same problem.
When I slize the keyboard open the screen wakes up.
When I close it the screen stays on.
Does a hard reset helps so the lightsensors works again?
Dank voor je reactie
Hey people
As described above, my display will turn off after a long time after being lit. Where is the problem? the root worked wonderfully well the recovery. I ask you for help! Sorry for my bad English. I use the Gooogle translator and I'm from Germany.
Auf Deutsch:
Wie oben beschrieben. Wenn ich das handy ausschalte wird das display lange schwarz nach beleuchtet. Das rooten und das aufspielen der recovery hat wunderbar funktioniert.
mfg
greeetz
Maybe you should also add in addition the german text on what you would like to ask.
Füge einfach noch die Beschreibung auf deutsch hinzu.
probably using the wrong kernel+recovery for your fw version.
Maybe some app is requesting root rights and that is what wakes the phone?
Happened to me a couple of times...
Sent from my D5503 using XDA Free mobile app
OK. I think now I know what you mean. I experienced the same last night after shutting down the phone. It tooks 2-4 seconds after the final vibrate till the display went off completely. I only saw it in a dark room. I assume the phone is somehow still shutting down.
Should be correspond to the case that you should wait ~30 seconds after shutting down till starting in flashmode / recovery mode.