Develop Bugs

O2 Atom does not start, Please Help

Hello Friends,
I have an O2 Atom device, which I recently picked up not even a month. I have tried to change the SIM card.When I switched it on again, Windows Mobile 5.0 startup screen came up and a white line dividing the screen into two and everything becomes white and goes into hang. I reset restart my device, and now it does not start all all.
Tried hard resetting the device by pressing on/off button + reset + call receive(green) + call end (red) button as suggested by O2 technical support, still nothing happens.
I have downloaed the latest patch, do not know how to install. Could you please help. Is it possible to flash the device without connecting to ActiveSync.
Please help, i am in a big problem , as I have lost all my contacts.
Please ..please..help.
Thanks in advance
Virtuoso[/b]

you can boot to bootloader (MN1) mode. if can'nt go to http://wiki.xda-developers.com/index.php?pagename=DeadBoot
goodluck.

XDA exec dead

Hi all
Recently I bought a XDA exec from eBay (used) It was working fine but I found light button was not working. (Very imp)
By mistake I cleared the memory of the device and same time did a soft reset
Then the device was got stopped at O2 screen at the start it self and not going further.
Then I removed the battery and also did a hard reset it dint helped after similar tries my XDA exec was dead with no screen at all now (just blank)
The only thing I could notice is when ever I plug the charger or USB cable from PC a red light blinks for few sec
I want through this site and got to know the issue is with the boot loader
Know the major problem to me is, to get into the boot loader (i.e. Light + power + reset) but as I said my light button is not working from the beginning is there any other way to get into the boot loader
Can any one help me in fixing this problem would be great help
Thanks and Regards
syed ([email protected])

no one knows wt do with this

Same thing happening to me!!
It was stuck on Boot Loader, then i cleared out the rom with "task 28 55aa"
at first i can see some words ("serials"), but now completely BLANK!!
The only thing i can do is go to "Clear storage" mode, either i typed 0 or x, both goes BLANK!
What im afraid is if the battery got empty because of re-trying..
Anyone please help us!....

did you reflash a ROM after task 28 55aa?

Im afraid so, yes.
I did "task 28 55aa" twice..
Any chance to make it right?

Ok, i just did (reset+power+light) and now i can see "Serial" and "v1.00" at the bottom.
I can see USB connection when i connect through "mtty"
Now what should i do?

Everything OK now.
If anyone have the same problem, PM me.
Ill be glad to help.

Now reflash the rom (upgrade) with the rom upgrade utility

syed_mail said:
Hi all
Recently I bought a XDA exec from eBay (used) It was working fine but I found light button was not working. (Very imp)
By mistake I cleared the memory of the device and same time did a soft reset
Then the device was got stopped at O2 screen at the start it self and not going further.
Then I removed the battery and also did a hard reset it dint helped after similar tries my XDA exec was dead with no screen at all now (just blank)
The only thing I could notice is when ever I plug the charger or USB cable from PC a red light blinks for few sec
I want through this site and got to know the issue is with the boot loader
Know the major problem to me is, to get into the boot loader (i.e. Light + power + reset) but as I said my light button is not working from the beginning is there any other way to get into the boot loader
Can any one help me in fixing this problem would be great help
Thanks and Regards
syed ([email protected])
Click to expand...
Click to collapse
Try reflashing with Jwrights rom upgrade (I don't think it requires going to bootloader) or any of the upgrade utility that does not require going into bootlader.

how do i do it
can u give me the procedure to do it
thanks

I have a probleme MY pc dosent detect the universal when i connect
it dispayes unrecgnised device
any help would be great

unknown problem

dear friends ,
my phone has shut down and only when you take out the battery and put it back in after which you press any button on the phone it comes on and shows the htc logo after which it displays the following
ipl 3.07.001
spl 3.07.000
gsm 02.69.90
os 3.7.0.0
remains on for about 5-6 seconds and goes off
have tried to enter the boot loader mode by pressing the record button and reset button but it continous to behave in the same manner as mentioned above .
also when i try to charge the phone it shows only a red light
hoping someone can offer a solution to my problem
thanks and regards

I'd also be interested to know about this as my MDA Compact III has just done exactly the same thing.

have you guys tried flashing...that could kill it if not done propertly....but i doubt,the led is on,splash screen appears...info appears...what were last few things you did
according to spl os and ipl you flashed artemis touch 4.02 if i'm not wrong...or maybe tom's v5...try reflashing the same rom or just try a hardreset

Interesting...I've recently flashed the same ROM (v4.02)
I am certain I followed all the instructions about USPL and its been working fine for about a week...then it just went blank!
Will try re-flashing and/or a hard reset.
Thanks for the advice.

mrd5477 said:
Interesting...I've recently flashed the same ROM (v4.02)
I am certain I followed all the instructions about USPL and its been working fine for about a week...then it just went blank!
Will try re-flashing and/or a hard reset.
Thanks for the advice.
Click to expand...
Click to collapse
well...if it worked i'm sure you installed some app or deleted some files...so the system doesn't work...
if so hr will help

dear friends,
took the device in for repairs the fault was with the power circuit board which had to be changed as`informed to me by the technician
i now remember a few months ago the power button stopped working and a few days before the phone went bad it would work intermittently but there was no spring in the button hence it would have to be pressed quite hard for it to work i feel that this loose power button caused the power circuit to fail also my sd card was spoilt and the same had to be replaced
cast me appx in usd 30 for the repairs
thanks

Revive URGENT PLEASE VERY URGENT

Hi all
I have a problem with my PDA (Qtek S200)
IPL 2.10.0001
SPL 2.G4.4PDA
GSM 02.69.21
THE 7.0.0.7
And it is this:
Made a backup of my contacts over SPBackup, did the flash ROM of everything he turned to run normally, I made the restores the contacts and SMS, ... and when it does reebot it is only by the initial image that presents the data above:
IPL, SPL, ...
We have tried to make the soft-reset (pen of the button and the small button on the camera and nothing)
My question: Does anyone know how solve this?
Best Regards and thanks
Bye

Anybody help me ?
Please it's very urgent...
thanks all

can you do a hard reset using the keys and see if that allows the device to boot again ?

reading your post again, i assume that is what you are trying to do with the camera button when resetting, hmmmm

Ok, if i were you, i would try this next.
Enter bootloader mode by doing the following
To enter bootloader, you need to hold the comm manager button and soft reset
If that allows you to enter bootloader, then try reflashing the rom
let us know how you get on after that.
also it might be worth posting in the forum for this device, if you havent already.

hard reset.....To perform a hard reset
Z3nD3n said:
Hi all
I have a problem with my PDA (Qtek S200)
IPL 2.10.0001
SPL 2.G4.4PDA
GSM 02.69.21
THE 7.0.0.7
And it is this:
Made a backup of my contacts over SPBackup, did the flash ROM of everything he turned to run normally, I made the restores the contacts and SMS, ... and when it does reebot it is only by the initial image that presents the data above:
IPL, SPL, ...
We have tried to make the soft-reset (pen of the button and the small button on the camera and nothing)
My question: Does anyone know how solve this?
Best Regards and thanks
Bye
Click to expand...
Click to collapse
To perform a hard reset
* Press and hold the CAMERA and COMM MANAGER buttons, and at the same time, use the stylus to press the RESET button at the bottom of your device.

Hello again ...
I am happy. Have back by my Qtek. had already done several times the Hard-Reset the PDA but always without success. I often followed and there began to anything on screen (the 3 colored bars, then asked the question of "send ..." where we have to press the green button "call") and then there came into bootloader and there could . He began to install everything right and it was if he had installed a Rom "new".
To all those who contributed to this "happy ending" my thank you very much.
sry my english
Bye and thanks

Help with HTC Touch Diamond, won't boot

Hello, this is my first post here. I tried to install Windows Mobile 6.5 as indicated in Gizmodo http://gizmodo.com/5281397/how-to-install-windows-mobile-65-right-now but it didn't work and now my phone won't boot.
The phone is an HTC Touch Diamond from Sprint. I followed all the steps indicated and everything look fine, but after installing the OS the phone displays the screen TOUCH DIAMOND, and then restarts and displays the same thing. I'm able to get into the boot loader (Tri color screen) and says:
DIAM500
SPL-0.57.CMONEX
MicroP-Diam (LED) vB
PSOC-Diam STAGE_EVT v20.
I don't know what to do now
Thanks

try to load back to default setting by pressing the power on button at the top of the phone, before the "Touch Diamond" logo come up, press and hold volume down button and the center button until the three color screen come out, then release the two button you are pressing..
if the problem still happen, that mean the rom you are using should have risk on it..
give it up and try other rom or flash it again..
hope my suggestion can help you solve the problem..

dont worry.
if bootloader is possible as you write
than you can flash all time orig. rom back.

Flash from Olinex 1.40 screen?
okokur said:
dont worry.
if bootloader is possible as you write
than you can flash all time orig. rom back.
Click to expand...
Click to collapse
Hi I have the same issue on my HTC Diamond. I flashed wm 6.5 and it was working fine, then it hanged on titanum weather. I reset and it stayed on the HTC Diamond page, I did hard reset and got the Olinex 1.40 3 color page. It does respond from serial to usb when I plug/unplug. Can I reflash without active sync?
Turns out I was able to flash, but both roms I tried work well on 1st install, but stay stuck on the Touch Diamond screen everytime I restart de device. Is it a problem with the radio not compatible , or is there a specific Hspl for each ROM???

I found solution for this problem. If your diamond won't boot go to bootloader mode and upgrade your radio http://modmydiamond.info/index.php?option=com_content&task=view&id=15&Itemid=26 and after that your dimond worked fine without loosing data.

try to hard reset the phone by pressing vol down key + the center button + reset button.
if the problem is still like dat..
try to install another rom..

davidwong007 said:
try to load back to default setting by pressing the power on button at the top of the phone, before the "Touch Diamond" logo come up, press and hold volume down button and the center button until the three color screen come out, then release the two button you are pressing..
if the problem still happen, that mean the rom you are using should have risk on it..
give it up and try other rom or flash it again..
hope my suggestion can help you solve the problem..
Click to expand...
Click to collapse
Thanks davidwong007 for your help, I was experiencing the same issue as op and your method did the trick. For a minute there I thought I had bricked my HTC Touch. I did step by step what you suggested and ended up in the rainbox screen, once I was able to do that, I knew there was a hope. i did a full factory reset of the phone and voila the phone fully booted, the pain in the butt touchflow loaded. Very important thing I forgot to do in the past is to back up my phone, after the restore you will lose everything on phone, except what is in the internal storage. Thanks again.