how to rebuild x04ht rom from dumped rom - Touch Diamond, MDA Compact IV ROM Development

(the steps below are so easy. please do not ask me to send you the rom unless you upload it to an unlimited server for other x04ht users. thanks.)
having been fighting with the dumped rom for two weeks, i finally could rebuild x04ht rom from dumped raw files. i thought i should share my experience with other x04ht users although it is nothing really special. general guides say, "just put raw files into the baserom folder with a base rom and run the kitchen", but this does not work.
see here if you do not know how to dump roms.
http://wiki.xda-developers.com/index.php?pagename=Hermes_HowtoDumpRom
assume you know how to use kaiser kitchen and dos commands and already have part0x.raw files and RUU_signed.nbh.
RUU_signed.nbh of cht rom recommended.
1) put Part01.raw, Part02.raw and RUU_signed.nbh in BaseROM folder
2) run !BEGIN.cmd and choose 1 to extract shipped rom
3) when it's done, you see temp, oem, rom and sys folders in the kitchen
4) delete oem, rom and sys folders because you don't need them now
5) copy XIPPort.exe to temp folder
6) copy Part01.raw to temp folder
7) rename Part01.raw to xip.bin
8) run XIPPort.exe
9) click "dump xip.bin" and you will see OUT folder now
10) there is boot.rgu in OUT\FILES. copy it to your desktop or somewhere
11) click "build xip_out.bin"
12) change the first box from 00310000 to 00320000, and the second from nk.nb to OS.NB.Payload
13) click "write xip_out.bin"
14) open command prompt and go to temp folder
15) type "..\TOOLS\NBMerge -kaiser os.nb" in command prompt
16) when NBMerge is done, close command prompt
17) copy os.nb to your desktop or somewhere
18) delete temp folder
19) run !BEGIN.cmd and choose 2 to extract dumped rom
20) when it's done, you see temp, oem, rom and sys folders in the kitchen
21) copy boot.rgu to rom\xip folder and replace OS.NB in rom folder by the one you created above
22) your kitchen is ready to use
does anyone hep me upload the rebuilt rom?? thanks.
qt

qtotter said:
having been fighting with the dumped rom for two weeks, i finally could rebuild x04ht rom from dumped raw files. i thought i should share my experience with other x04ht users although it is nothing really special.
see here if you do not know how to dump roms.
http://wiki.xda-developers.com/index.php?pagename=Hermes_HowtoDumpRom
first of all, i used kaiser kitchen. what you need is Part01.raw, Part02.raw and RUU_Signed.nbh (i used the htc shipped wwe rom.) general guides say, "just put all these files into the baserom folder and run the kitchen", but this does not work.
second step is just usual. run the kitchen to extract oem, sys and rom. after this step, you will have OS.NB in the "rom" folder. you need to change this file to make the kitchen work. you need to make OS.NB.Payload from OS.NB. to do so, just execute "NBSplit.exe -kaiser OS.NB"
now, you need XIPPort.exe, Part01.raw and OS.NB.Payload. copy OS.NB.Payload and Part01.raw to the folder where you have XIPPort.exe, and rename Part01.raw to xip_out.bin. run XIPPort.exe. you will see two boxes on the bottom. change the first box from 00310000 to 00320000, and the second box from nk.nb to OS.NB.Payload. finally, click "write xip_out.bin", and you have a new OS.NB.Payload.
you will make a new os.nb from this OS.NB.Payload by "NBMerge -kaiser os.nb"
just replace os.nb in the kitchen "rom" folder by this new os.nb. and now you can start cooking a rom.
does anyone hep me upload the rebuilt rom?? thanks.
qt
Click to expand...
Click to collapse
Hello qt
ohisashiburi... you can upload the rom to my server. no limitations.
How do you solve the Smail! problem? MMS lite craps itself every now and then.
I am using 2 touch pro since July, so I have no idea what SB uses for
their Smail. The old softbank mail app doesnt work anymore..

aquasesh said:
Hello qt
ohisashiburi... you can upload the rom to my server. no limitations.
How do you solve the Smail! problem? MMS lite craps itself every now and then.
I am using 2 touch pro since July, so I have no idea what SB uses for
their Smail. The old softbank mail app doesnt work anymore..
Click to expand...
Click to collapse
address of your server? thanks.
x04ht has Arcsoft's mms client for smail (softbank mms), which is integrated into wm messaging and much faster/better than access' slow mms client provided at sb's x series site. there must be some trick with it (maybe, checking language/locale setting or certificate), and it did not run on wwe rom. been preoccupied with dumped rom reconstruction, i haven't had much time to play with this program yet.
this x04ht rom has many japanese apps and 411 muis, and am sure many can play with it to make our sb devices working better!
qt

qtotter said:
having been fighting with the dumped rom for two weeks, i finally could rebuild x04ht rom from dumped raw files. i thought i should share my experience with other x04ht users although it is nothing really special.
see here if you do not know how to dump roms.
http://wiki.xda-developers.com/index.php?pagename=Hermes_HowtoDumpRom
first of all, i used kaiser kitchen. what you need is Part01.raw, Part02.raw and RUU_Signed.nbh (i used the htc shipped cht rom.) general guides say, "just put all these files into the baserom folder and run the kitchen", but this does not work.
second step is just usual. run the kitchen to extract oem, sys and rom. after this step, you will have OS.NB in the "rom" folder. you need to change this file to make the kitchen work. you need to make OS.NB.Payload from OS.NB. to do so, just execute "NBSplit.exe -kaiser OS.NB"
now, you need XIPPort.exe, Part01.raw and OS.NB.Payload. copy OS.NB.Payload and Part01.raw to the folder where you have XIPPort.exe, and rename Part01.raw to xip_out.bin. run XIPPort.exe. you will see two boxes on the bottom. change the first box from 00310000 to 00320000, and the second box from nk.nb to OS.NB.Payload. finally, click "write xip_out.bin", and you have a new OS.NB.Payload.
you will make a new os.nb from this OS.NB.Payload by "NBMerge -kaiser os.nb"
just replace os.nb in the kitchen "rom" folder by this new os.nb. and now you can start cooking a rom.
does anyone hep me upload the rebuilt rom?? thanks.
qt
Click to expand...
Click to collapse
Hey,
Thanks for the info, but I tried, and couldn't get it to work.
First step, you said that it doesn't work, so what was that works? the second and third that makes it work???
The second step, where did you have to put the Split? because just clicking it will not make it run... and so it is with the third step too
Thanks

Harry8521 said:
Hey,
Thanks for the info, but I tried, and couldn't get it to work.
First step, you said that it doesn't work, so what was that works? the second and third that makes it work???
The second step, where did you have to put the Split? because just clicking it will not make it run... and so it is with the third step too
Thanks
Click to expand...
Click to collapse
i wrote a step by step guide in the first post. check it out.

qtotter said:
i wrote a step by step guide in the first post. check it out.
Click to expand...
Click to collapse
Thanks!! I'll try it out.
助かりました

i need your X04HT rom ,please help me .
my msn is
[email protected]
yorosikune

qtotter said:
i wrote a step by step guide in the first post. check it out.
Click to expand...
Click to collapse
qtotter san,
can you send the X04HT ROM to me,
Thank you very much
my email: [email protected]

I need your X04HT rom... plz...
plz send to my msn.
my msn : [email protected]
thanks.

lanpililg said:
i need your X04HT rom ,please help me .
my msn is
[email protected]
yorosikune
Click to expand...
Click to collapse
esc166 said:
I need your X04HT rom... plz...
plz send to my msn.
my msn : [email protected]
thanks.
Click to expand...
Click to collapse
ylyu said:
can you send the X04HT ROM to me,
Thank you very much
my email: [email protected]
Click to expand...
Click to collapse
are you 3 joking?
http://rapidshare.com/files/173269516/RUU_X04HT_1.73.762.15_no_radio.zip

Kevbodian said:
are you 3 joking?
http://rapidshare.com/files/173269516/RUU_X04HT_1.73.762.15_no_radio.zip
Click to expand...
Click to collapse
Hi Kevbodian
this Zip file is CRC error.

Any chance for a reupload?
Cheers
Sebastian

Sebaschan said:
Any chance for a reupload?
Cheers
Sebastian
Click to expand...
Click to collapse
i have the file Original_X05HT_ROM_081207.rar
Its not X04HT

ROM Development
hi people... im keen on developing ROMs.. and i searched all over XDA and found this to be the nearest one... can somebody direct me to the right forum or give me an explanation on how to do it?? thank you and i have the kitchen downloaded

Related

[TUT]bepe kitchen for trinity user howto...kook your rom!!!

Hi, I'm preparing all you need to kook a italian rom by yourself...
in some minutes 1st part, with programs that you need to extract .nb files from .nbh, and reassemble .nbh as you like, how to dump a rom and how recompile it..
bye!!!
ok, the utilityes you need are:
*** all utilities are ready to download in the end of this post!!! ***
1) nbhtool_trin.rar
2) package_tool.rar
3) nbdumper.rar
4) bepe_kichen_trinity_ita_WM-6.1.rar
Code:
6.1 bepe_kitchen.rar
5) Flash_nbh.rar (included into kitchen!)
6) rgu to xml transform an rgu or a reg file into a provxml file!!
7) dsm patcher to update also the dsms files to respect the rom's os and build version
1) nbtool from dutty is usefull to decompile/recompile nbh , decompil enbh, choose nbh to decompile, you have 1 or more .nb files, windows.nb is that you need, the rom, you should find also:
radio.nb (radio)
first/second_splash.nb (the 2 images shown as splashscreens!!!)
ipl.nb (boot of trinity...)
spl.nb
and other that now I not remember...
................
to recompile the nbh file, just select that you need (os.nb, first.nb second.nb)
for my experiences, try first times only with os.nb, choose the file and compile the nbh files,your rom is ready to be flashed into device...
2) package tools analize the dumped os windows.nb and tell about sys and oem versions, more it creates packages of dumped rom, and insert all files into the 2 system directory "oem" and "sys" with button (menu) "build packages"
3) nbdumper from tadzio, it is the important tool togheter bepe kichen, with it you are able to dump "windows.nb"
put windows.nb into the folder, dos prompt and write:
nbdump windows.nb (then press enter...)
in few minutes you have inside also the directory named: windows.nb.dump, iside you can find all files that will be in rom on your device...
4) now open package tools by bepe, search this directory, and analize, after analizing, click on build packages...
after some time, you in "windows.nb.dump" directory have: sys and oem folders...
this is the real os...
now you neeedd xip directory...
copy windows.nb into the directory named:XIP_extract (that you can find in "bepe_kichen_trinity_ita" tool...
copy it into the directory, rename from windows.nb into "os.nb"
click on "Make_XIP.bat" and then you have "xip" folder...
copy xip folder into "rom" folder in of "bepe_kichen_trinity_ita", copy os.nb too into "rom" folder, so you have rom folder and inside:xip fiìolder and os.nb...
ok...
now, oem and sys folder obtained with package tools, copy them into "bepe_kichen_trinity_ita" tools, and you have:
oem, sys, tools, xip_extract and rom folders, and the exes...
now is ready...
you have to click on "buildos.exe" and the rom will be build, ok, now there is a new folder, "temp", now you have finished, only click on createrom.bat and in few seconds you can find into \temp\ folder a file named os-new.nb, this is the new rom, build .nbh with dutty nbtools, and can flash it on your device!!!
5) to flash put nbh created into folder:Flash_nbh, flash....
next, tools and howto: create extended_roms;create own splashscreens, adding own packages (the packages are additional programs... into I left yet 3/4 packages from mine!!).....
*******************************************************************
I must make all credits also to udK, that discovered with me the right way to kook roms...
and invite all people to make some dotations to him, for the hard work that he made to have a good italian rom to mount on our devices!!!
thanks friend...
*******************************************************************
I think is better to try with udk or lasagna roms to start, they are perfext and logically structured as bepe kichen wants!!!
bye!!!
****************************************************************************************
*
* P.S.: and finally I think that if you decide to use udk rom to make experiments, you have to donate him,
* and if uou want to use lasagna rom to learn to use bepe kichen, also you have to make donations to guybrush.
* they worked hard to translate the rom, you must donete to use theyr roms I think is the only think to do
* to tell them "thanks!!!", really...
*
****************************************************************************************
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
lesson 2:
how make own splashscreen!!!
just open an image or create one, with also paint;
make it 240x320 pixels, 240 in width, 320 in height...
save it as bmp, with 24 bits...
open it with nb_image_converter
convert to "nb"
save it as first and second.nb...
now, if you don't have windows.nb use dutty's nbtools to extract from rom, reuse nbtools to compile nbh, add
in os: windows.nb
in "first splash" the file first.nb
in "second splash" the file second.nb...
compile nbh file and flash into ppc, when you finish, you can see you freferred splash screens!!
next:
create a package and/or translate the exe/mui files in your language with resource hacker!!!
try to open an exe, or first a mui files if there is into the package!!
you can see:
icon (you are able to change it , but is not important for us!!)
dialog, you can move the object inside them, rename or translate strings and other...
string table, here you can change, translate in your language tje strings of mui/exe!!!
and other, but for modify translate this basts!!
see later!!! bye!!!
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
lesson 3:
for mui:
if you have traslated them, you have also to rename: exaple, if therer is amui xxx_409.mui, in english of couse, and you stranslated it into italian, you hace also to rename it by xxx_409.mui to xxx_410.mui!!!
and for italians mui you can use the ones from tynh wm6 Italian rom!!!
and also initflashfiles.dat must be traslate...:
and also rgu files:example:
string: "programs" must became "programmi"
string: "my pictures" must became "immagini"
etc.etc.
howto: CREATE A PACKAGE!!!
ok, download theese utility:
wince cab manager from here:
http://www.ocpsoftware.com/
(full funcional trial for 15 days!!!)
and my utility: packages creator (a little tools of mine!! )
from here:
-------------------------------------------------------------------------------
UPPED:
(new version... bugs solved... option improved!!!)
now in bilingual ITA/ENG, and with more option to personalyze your new packages!!
new beta with more and more options to create initflashfiles.txt...
flag:"simulate folder names" on wince cab manager and put reg file into package folder you choice...
example: "...\trypackage\windows\batterystatus\batterystatus.exe"
you have to put reg file into "...\trypackage\to-import.reg" ok???
and here the new beta of package creator!!!
Hi all, from a Bennec83's Idea I released this last version that works with cab analyzer, and make packages from cab files automatically...
*******************************Re-reupped 1st good working release!!! 4.1 *********************
-------------------------------------------------------------------------------
ok!!!!
P.S.: if th bepe kichen shows an error during the kook operation, it will be becouse there is another file (duplicate file) yet present in rom, delete it from other subfolder, not in the package just inserted...
next appointmant to create own extended_rom!!! and some triks on registry (modifing rgu files!!!)
see you!!!
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
lesson 4 playing with extended rom:
howto: create and use extended roms...
ok, have to download the utility htc_extended_rom_editor
I think is all.... (for now!!!)
your knowledge about roms, its components, how to dump, build, add packages are full... rests to edit rgu and provxml...
but in next days....
bye bey and good experiments!!!
*********************************************************************************
*********************************** ******************************
*********************************** UPDATES ******************************
new version of buildos+packagetools, some imporvements, and context menu on packages to enable/disable them by default!!
new version of buildos, now:
1) xip porting for os ber updating;
2) updater for Rom Creation Date;
3) Updater for Rom version at Boot screen!!!
enjoy!!!
improved some context menus on selected package.....
xip porting for OS version and Rom's Date creations Updater!!
new version of package creator, to have own directory where place shortcuts, and some minor bugs solved
here: and added links in initflashfiles.txt for .htm files for "Help"!!!
P.S.: I need beta testing for my apps, becouse, I go on programming and there are allwais same bung into...
bye!!! ( a big thanks to guybrush and udk for testing and support, but specially to Vibranze for testing package creator!!!)
*********************************************************************************
Traduzione in italiano della guida del Kitchen
Lavori in corso..
ervius said:
Hi, I'm preparing all you need to kook a italian rom by yourself...
in some minutes 1st part, with programs that you need to extract .nb files from .nbh, and reassemble .nbh as you like, how to dump a rom and how recompile it..
bye!!!
Click to expand...
Click to collapse
thanx, let's start cook togheter
--reserved for packages--
I only hope that my 3d iwill be usefull to be better, and share togheter a lot of packages for our trinity devices!!
see lather...
I love you.
This is what I searched for long time.
Two question.
1) What difference there is between this and Orginiale Bepe ROM kitchen form Hermes.
2) Can I use all ROM that i Want to start the cooking?
....
3) This is possible some mirror not rapidshare? (for example www.divshare.com)
Grazie mille.
Viva il P3600.
cicciocant said:
I love you.
This is what I searched for long time.
Two question.
1) What difference there is between this and Orginiale Bepe ROM kitchen form Hermes.
2) Can I use all ROM that i Want to start the cooking?
Grazie mille.
Viva il P3600.
Click to expand...
Click to collapse
1) infinite greetings to bepe for the beautifull tool...
the kichen is the same, only you have os and xip for trinity (after you extrapolated oem-sys folders and xip!!!)
2) you can use all roms you want, also in other languages, but only if they , after you dumped and analyzed with bepe package tools, and have oem and sys folders (and xip folder...), but if you try with roms that have missed files, you must try to insert them into oem or sys dolder, you, after use bepe package tools must see only "oem" and "sys" folder, nothing else, to know that the rom is really ok..., in other case the rom was built in confused mode or with other utilities, that I consider oldier...
bye!!!
and my final point is also share a lot of packages....
for now I think it's all, but in few days I explain also howto build packages and other....
see you!!
ervius, very good tutorial i think it'll be useful not only for italian people but for everyone who want learn how to cook their own rom. Just a tip...be careful, read everything and try to understand how these tools works and check everything before try to flash your device.
Guybrush said:
ervius, very good tutorial i think it'll be useful not only for italian people but for everyone who want learn how to cook their own rom. Just a tip...be careful, read everything and try to understand how these tools works and check everything before try to flash your device.
Click to expand...
Click to collapse
yes... by attentions, use the tools at own risk, and specially use them with "brain"!!!
bye!!
Thanks ervius! you are truly "mythical". I`ll read all with much attention tomorrow, now i`m seat in one park bench to 5 meters from the sea.....
Hi...... morf3o.
added lesson 2 (how to create/modify images and create your splashscreens at ppc boot!!!)
at first post!!
see you later to build our first package!!!
I tried this tools with Lasagna 205 ROM.
I arrived to package tools
When I press "Build Packages" I've this error:
Code:
Syntax error map.txt:
tom
tom is the last lin of map.txt.
Can i delete it witouth problem?
At the end I've also the OEM and SYS directory but there are also three file out all directory:
Recorder.exe
Voice Recorder (link)
Recorder.exe.0410.mui
It's ok?
One Advice.
To arrive at DUMP directory and afther to OEM and SYS I found more easy and fast this way:
http://forum.xda-developers.com/showthread.php?t=316940
Thanks 1000!
cicciocant said:
I tried this tools with Lasagna 205 ROM.
I arrived to package tools
When I press "Build Packages" I've this error:
Code:
Syntax error map.txt:
tom
tom is the last lin of map.txt.
Can i delete it witouth problem?
At the end I've also the OEM and SYS directory but there are also three file out all directory:
Recorder.exe
Voice Recorder (link)
Recorder.exe.0410.mui
It's ok?
One Advice.
To arrive at DUMP directory and afther to OEM and SYS I found more easy and fast this way:
http://forum.xda-developers.com/showthread.php?t=316940
Thanks 1000!
Click to expand...
Click to collapse
so, you have to install also java virtual machine... with this utilities in not necessary...
thanks ciccio but i'd like to continue with bepe's kichen, do you like use it??
ok...
3 files are out, put them into \oem\oemapps\ directory, so you now have only oem and sys directory, then... extract xip etc... etc...
ok!!!
thank's for your answers.
I like also Bepe's Kitchen. GO ON!
For the Syntyax error?
I've to delete "tom" at the end of map.txt?
cicciocant said:
thank's for your answers.
I like also Bepe's Kitchen. GO ON!
For the Syntyax error?
I've to delete "tom" at the end of map.txt?
Click to expand...
Click to collapse
I don't have your error, but if finally you have oem and sys folders, then it works well...
but you can try to delete and post if it work...
bye!!
Sorry for my newbie question...
In my understanding all this tools are working with ROM files you already found "somewhere".
What I want to do first is getting a working ROM out of a Trinty device. E.g. I have a german Vodafone device with the Vodafone custom ROM. I simply want to "copy" this ROM on my Harddisk. No changes. I only want to be able to flash it back if I want to, to have the device in the same state it is now.
Which tool do I have to use?
What do I have to do?
Check this article
http://wiki.xda-developers.com/index.php?pagename=Hermes_HowtoDumpRom
Ciao
A question ervius:
we suppose that I succeed to modify/create my first ROM, exists a way in order to test it without flash on my device? A way for being sure that if I flash, i do not burn my trinity....
Thanks........ morf3o.
morf3o said:
exists a way in order to test it
Click to expand...
Click to collapse
The only way is flash your trinity and hope
claros said:
Check this article
http://wiki.xda-developers.com/index.php?pagename=Hermes_HowtoDumpRom
Ciao
Click to expand...
Click to collapse
Thanks... that is what I was looking for. I found this (http://www.modaco.com/Paul-s-guide-to-backin-t255090.html) in the meantime. But the two guides differ: Paul says, that I only need the Part02.raw file. Why?
saminegm said:
Thanks... that is what I was looking for. I found this (http://www.modaco.com/Paul-s-guide-to-backin-t255090.html) in the meantime. But the two guides differ: Paul says, that I only need the Part02.raw file. Why?
Click to expand...
Click to collapse
Your OS is in part2, first two parts are the XIP partition aka your boot sector.
Ciao

[UTIL]buildos+packagetools 4.2b3 ***more improvements (good xipporting!)***!!!

Hi , last version of buildos+package tools....
try 4.2b3 version now.....
Last version 29.04.2008
http://rapidshare.com/files/111296473/kitchen.zip
improved real xipporting with buildxip.exe...
how it works...
dump xip.bin from same or other device; so you have xip\ folder annd romhdr.bin.
copy xip\ folder just created into my buildos by clicking on:"New Xip"
and then by pressing on: "port it" and selecting all xip->same or different device xip, you finally have new xip build ported into my kitchen, ready to be builded into "out.bin" by buildxip executed by all "CREATE_ROM_xxx.bat" files building new rom.
Code:
this last version has also load/save config, so you can preconfigure from
ultralight to full rom, load a config file and only by a click you have the
preferred rom to build, so you can publish in a bit all kind of roms you want!!!
this tool goes into kitchen or bepe's WM 6.1 one, or WM 6.1 of mine...
try it and post new bat and \TOOLS utils to extrac xip from other devices to make better it..
and also bat and \TOOLS utils to extract os.nb from other devices....
(I think the bats have to named like: "EXTRACT_DUMP.......bat" example: Extract_dump_from_kaiser; extract_Dump_from_hermes ecc... )
ervius said:
Hi , last version of buildos+package tools....
added:
to extract xip for non trinity roms, at dump\ analyzing... it execute a bat file...
all bat files to extract xip are stored into \TOOLS folder, and must have a name that starts with: "XIP_extract" example: XIP_extract_From_hermes.bat; XIP_extract_from_trinity.bat ecc....
try it... obviously there are a lot of devices, you can try for yours and post the bat to make bettere xip extracting of buildos , inside \tools folder, yet XIP_extract_from trinity.bat and XIP_extract_from_kaiser.bat
TODO:
extract from os.nb by other devices from executing others bat like xip extracting...
bye!
download here:
http://rapidshare.com/files/103757462/buildos_3.9b3.rar
try it and post new bat and \TOOLS utils to extrac xip from other devices to make better it..
and also bat and \TOOLS utils to extract os.nb from other devices....
(I think the bats have to named like: "EXTRACT_DUMP.......bat" example: Extract_dump_from_kaiser; extract_Dump_from_hermes ecc... )
Click to expand...
Click to collapse
Can you give us a description of your cooking?
cyron_at said:
Can you give us a description of your cooking?
Click to expand...
Click to collapse
to dump an nb file....
it need \dump folder and os.nb
outside folder.... open package tools.... and can rebuild oem\ and sys\
if you want you can insert also \xip folder using inside \tools bats....
choicing what device is from the os.nb and choice the right bat included, listed into a form with a max of 16 radiobutton to choice bat....
to build rom:
only open buildos choice rom dumped (oem\ sys\ xip\)
and it rebuild \dump folder, then, by executing a bat (that you can change to your use (also this can be implemented: more bats to have multidevices rombuilder....) and finally you have new os.nb or executing also ruu_updates_rom, the windoe to flash new ruu_signed).....
bye!
ervius said:
to dump an nb file....
it need \dump folder and os.nb
outside folder.... open package tools.... and can rebuild oem\ and sys\
if you want you can insert also \xip folder using inside \tools bats....
choicing what device is from the os.nb and choice the right bat included, listed into a form with a max of 16 radiobutton to choice bat....
to build rom:
only open buildos choice rom dumped (oem\ sys\ xip\)
and it rebuild \dump folder, then, by executing a bat (that you can change to your use (also this can be implemented: more bats to have multidevices rombuilder....) and finally you have new os.nb or executing also ruu_updates_rom, the windoe to flash new ruu_signed).....
bye!
Click to expand...
Click to collapse
...it need \dump folder and os.nb
-> which means I should extract rom?
--> How can I do this?
---> I am using the tools of RomDonald. Is this ok?
From the tool:
1.) Open: There I select my \Dump\folder
2.) How can I rebuild oem/sys?
Questions over questions...
Would you be so kind and make a few screen-shots?
I would be veryyyyyy happy!
Thx,
Chris
cyron_at said:
...it need \dump folder and os.nb
-> which means I should extract rom?
--> How can I do this?
---> I am using the tools of RomDonald. Is this ok?
From the tool:
1.) Open: There I select my \Dump\folder
2.) How can I rebuild oem/sys?
Questions over questions...
Would you be so kind and make a few screen-shots?
I would be veryyyyyy happy!
Thx,
Chris
Click to expand...
Click to collapse
read also this 3d...
http://forum.xda-developers.com/showthread.php?t=320504
Once XIP is extracted, what exactly gets done to port the XIP to trinity?
Thank ERVIUS
Very good tools ...
4.0b1 is borning, what about???
now:
1) it can dump os.nb from different devices (kaiser / hermes/trinity for now!) executing differents bat made just to dump them...
2) extract xip from different devices (kaiser/hermes/trinity for now!) by executing different bats made just to extract them...
3) build os (for trinity/hermews also ruu_signed.nbh) for different devices (kaiser/hermes/trinity for now)
I think tomorrow, ops today in the afternoon, I'll post it....
what I need???
that someone make some bats to dump/build os.nb for other devices, and bats to extract xip from other devices....
bye!!!
Build Packages,..
Hello!
There is an "error" while building packages:
When I say: Do not import XIP..-> There is no XIP folder in the rom -> Load rom does not work
When I say yes & import from trinty there is an error message :-(
However the XIP folder will be created. But the boot.rgu ... is not the boot.rgu from the origial rom. What must I do now?????
Any idea?
Thx
cyron_at said:
Hello!
There is an "error" while building packages:
When I say: Do not import XIP..-> There is no XIP folder in the rom -> Load rom does not work
When I say yes & import from trinty there is an error message :-(
However the XIP folder will be created. But the boot.rgu ... is not the boot.rgu from the origial rom. What must I do now?????
Any idea?
Thx
Click to expand...
Click to collapse
yes, wait the 4.0b1....
and test that one....
ervius said:
yes, wait the 4.0b1....
and test that one....
Click to expand...
Click to collapse
Sure! When do you think will the release be published?
cyron_at said:
Sure! When do you think will the release be published?
Click to expand...
Click to collapse
some minutes, I'm upping 19209 Italian kitchen that contains buildos-packagetools 4.0b1!!!
ervius said:
some minutes, I'm upping 19209 Italian kitchen that contains buildos-packagetools 4.0b1!!!
Click to expand...
Click to collapse
Thanks Ervius... Great News!!! i will test it tonight.
axl79 said:
Thanks Ervius... Great News!!! i will test it tonight.
Click to expand...
Click to collapse
yes...
if I'll able to upload it....
some connectivity problems.....
buildos is online.... version 4.0b2.....
to insert imto kitchen...
bye!
ervius said:
buildos is online.... version 4.0b2.....
to insert imto kitchen...
bye!
Click to expand...
Click to collapse
added v2 version of 4.0b1, some bugs solved on CREATE_ROM_***.bat executing...
ervius said:
added v2 version of 4.0b1, some bugs solved on CREATE_ROM_***.bat executing...
Click to expand...
Click to collapse
Thank you.. Really nice tool! Trying tonight!
hey ervius I can use this tools to build a 19209 rom? Are you going to release your versions?
GDT said:
hey ervius I can use this tools to build a 19209 rom? Are you going to release your versions?
Click to expand...
Click to collapse
yes, you can, I posted kitchen until this afternoon, and don't know if I'll post the 19209 rom...
version 3 in 1st post...
some improvements, soved other little bugs, added "execute CREATE_ROM_***.bat" flag by default and context menu to delete files on "search duplicete files" into rgu editor...
bye!

20924, Sys and Xip, Big bug help.

Hi all, i have complety translated, .rgu / .dsm / .bmp / dpi 96 to 192 / 0409 to 0406.
from 20924.
But, when i cook it, and flash my phone, it dosen't book. I can see the version, but i can't not come to wm6 startscreen.
Do some1 know what it could be ?
Could some1 please look at my files maybe :/?
http://rapidshare.com/files/161467646/sys.rar
Bump, no one want to look in it and help me ??
Search for and download a tool called G'reloc.
A common issue with ported OS builds is that they fail to boot due to improperly coded/placed files. G'reloc will fix this for you. Just run it right before cooking, and then once compiled and flashed, your ROM should boot fine.
*You will need to find the correct codes for G'reloc and a Diamond ROM. I have only used this tool on the Kaiser, so I cannot tell you what they are.
NotATreoFan said:
Search for and download a tool called G'reloc.
A common issue with ported OS builds is that they fail to boot due to improperly coded/placed files. G'reloc will fix this for you. Just run it right before cooking, and then once compiled and flashed, your ROM should boot fine.
*You will need to find the correct codes for G'reloc and a Diamond ROM. I have only used this tool on the Kaiser, so I cannot tell you what they are.
Click to expand...
Click to collapse
As I can see, my package builder+buildos run it before it is done.
But anyway, could allways try it ), what shall i put in ? Some1 knows it ?
danny_and_2 said:
As I can see, my package builder+buildos run it before it is done.
But anyway, could allways try it ), what shall i put in ? Some1 knows it ?
Click to expand...
Click to collapse
I tried using a newer BuildOS for the Kaiser that included G'reloc, and it never worked properly. I would run G'reloc on it's own, and then uncheck the box to run it as part of BuildOS.
If those values are auto filled in for you, then give it a shot with them. Worst case, the phone still doesn't boot.
NotATreoFan said:
I tried using a newer BuildOS for the Kaiser that included G'reloc, and it never worked properly. I would run G'reloc on it's own, and then uncheck the box to run it as part of BuildOS.
If those values are auto filled in for you, then give it a shot with them. Worst case, the phone still doesn't boot.
Click to expand...
Click to collapse
Yes they just came automatic, so. Yes i will try that one, will report back if it dosen't
--- Edit ---
I couldn't i get an I/O error 105. ? Some1 knows what this it ?
--
Run-time error 105: File not open for output.
This error occurs if you try to use standard input and output functions
like Readln and Writeln without the Uses WinCRT; statement.
To correct this error, add Uses WinCRT; to your program.
How exactly did you translate the 96.DPI files?
Safe yourself the headaches and use the Diamond 1.96 as a base.
That would give you all the SYS 192 dpi files you need.
Are you making the ROM true 0406?
Or just translating or renaming the 0409.mui files?
Noonski said:
How exactly did you translate the 96.DPI files?
Click to expand...
Click to collapse
I have copyed the files from the diamond (192) to it.
Noonski said:
Safe yourself the headaches and use the Diamond 1.96 as a base.
That would give you all the SYS 192 dpi files you need.
Click to expand...
Click to collapse
I also would, but it ain't released on danish
Noonski said:
Are you making the ROM true 0406?
Or just translating or renaming the 0409.mui files?
Click to expand...
Click to collapse
I have copied the danish 0406.mui files, and changed it in every .rgu and .dsm file.
Bump, bump, bump.
Must be some1 out there, there can help me find my mistake ;/
danny_and_2 said:
Must be some1 out there, there can help me find my mistake ;/
Click to expand...
Click to collapse
HI
For port this os build i've made this:
first try to port only the xip
Delete folder from your old working kitchen:
MSXIPKernel
MSXIPKernelLTK
AND OEMXIPKernel if exist
Delete your old OS.NB in ROM folder of your kitchen
Now you need to Extract OS.NB From a diamond ROM 20924 protected or not !
(My rom for exemple)
take the 20924 OS.NB in your ROM folder
then just cook with your old sys and oem folder without the folder mentioned on top. flash & verify xip version.
if this work ,change your sys with the 20924 you have
but keep some files from your old working sys
if i have a good memory i've keep this:
.ROM folder
.VM folder
.Metadata folder
.hd.dll folder
.osaxst0.dll folder
.gwes.exe folder
possible some other files...
if you have Greloc error replace files mentioned in error
try this.
ask if you need help
xboxmod said:
HI
For port this os build i've made this:
first try to port only the xip
Delete folder from your old working kitchen:
MSXIPKernel
MSXIPKernelLTK
AND OEMXIPKernel if exist
Delete your old OS.NB in ROM folder of your kitchen
Now you need to Extract OS.NB From a diamond ROM 20924 protected or not !
(My rom for exemple)
take the 20924 OS.NB in your ROM folder
then just cook with your old sys and oem folder without the folder mentioned on top. flash & verify xip version.
if this work ,change your sys with the 20924 you have
but keep some files from your old working sys
if i have a good memory i've keep this:
.ROM folder
.VM folder
.Metadata folder
.hd.dll folder
.osaxst0.dll folder
.gwes.exe folder
possible some other files...
if you have Greloc error replace files mentioned in error
try this.
ask if you need help
Click to expand...
Click to collapse
Hi there.
Thanks for you guide, I'll try it right away.
And I will say if I run into a problem.
xboxmod said:
HI
For port this os build i've made this:
first try to port only the xip
Delete folder from your old working kitchen:
MSXIPKernel
MSXIPKernelLTK
AND OEMXIPKernel if exist
Click to expand...
Click to collapse
They aren't in my kitchen with this rom. Don't know why.
xboxmod said:
Delete your old OS.NB in ROM folder of your kitchen
Now you need to Extract OS.NB From a diamond ROM 20924 protected or not !
(My rom for exemple)
take the 20924 OS.NB in your ROM folder
then just cook with your old sys and oem folder without the folder mentioned on top. flash & verify xip version.
Click to expand...
Click to collapse
It boot, and it works. Haven't looked so much on the rom, just verify'ed the xip version.
xboxmod said:
if this work ,change your sys with the 20924 you have
but keep some files from your old working sys
if i have a good memory i've keep this:
.ROM folder
.VM folder
.Metadata folder
.hd.dll folder
.osaxst0.dll folder
.gwes.exe folder
possible some other files...
Click to expand...
Click to collapse
I have tried what you said, but the mobile just won't boot, and i don't know why ! /:
I think i need some more files?
xboxmod said:
if you have Greloc error replace files mentioned in error
Click to expand...
Click to collapse
I don't have that.
have a look here :
http://forum.xda-developers.com:80/showthread.php?t=379598
TekTonik said:
have a look here :
http://forum.xda-developers.com:80/showthread.php?t=379598
Click to expand...
Click to collapse
Hi there, trust me. I have looked the thread many times ..
Anyway, i got an update.
I have get the phone to boot, with the orginal OS & OSFILES.. Now i just need to find what files i need to have, to get it boot..
But i still got a bug, when it boot, touchflo3d won't start, it just skips. ?
The problem you are facing might be (99%) because of improper XIP porting. Just for suggestion, go through my XIP porting guide (in my signature) and try again with a working 20924 XIP (if you cant find one then I'll up the xip.bin from which I ported and am using)
Using original OS folder would not qualify as SYS porting If you check the SYS build no, you will see the original no and not the ported build
ababrekar said:
The problem you are facing might be (99%) because of improper XIP porting. Just for suggestion, go through my XIP porting guide (in my signature) and try again with a working 20924 XIP (if you cant find one then I'll up the xip.bin from which I ported and am using)
Click to expand...
Click to collapse
Hi there.
I finally got it to work (more or less), someone, know the files i have to keep in the shell ?, it wont lunch flo3d. :S ?
Some1 know why ?
ababrekar said:
Using original OS folder would not qualify as SYS porting If you check the SYS build no, you will see the original no and not the ported build
Click to expand...
Click to collapse
But i needed to find out, witch folder there was stopping me from booting, and that was my answer , now i just need to find out what files i have to keep, and there are only 587 files..
I will report back soon
anything new about an issue, I try to port build 20757 from BlackStone and I'm facing the same problem too : replacing SYS only doesn't boot

Samsung SGH-i780 (and any other WM device for that matter!): Learn how to cook ROMS

Hi guys,
I decided to open a blog which explains how to cook roms for the i780. There are very few chefs, and cooking is a really hard science to learn without help! So, I decided that I take the time and write posts so that everyone could learn the process in a methodical manner and cook roms in the future!
I'd slowly write posts explaining each step of the process in detail, so that we can have more people learning how to cook and make the i780 community more happening
Head over to this URL to check out the first few posts -
http://i780romdev.blogspot.com
Update:
Attached core kitchen tools that you'll need to use! Enjoy!
cheers
San
I never was a fan of this forum, not sure why, maybe because I use a ASUS P527 and there are not proper instructions on how to create a custom ROM, I appreciate your taking the initiative
I think its good fun to try and figure out things on your own
Non-HTC devices do have a very small fan base unfortunately....and ironically, HTC makes the crappiest devices imo (highly crash prone, buggy, lousy drivers, useless qualcomm processor)!
You can apply the same tools and techniques even to cook asus roms....its not all that different
cheers
wooooooow thanks a lot buddy finally we have it also !!!
when will u release part 3? and also can u give the links of programs? like pkgtools_? coz i tried to download it from somewhere else and it had virus
benveq said:
when will u release part 3? and also can u give the links of programs? like pkgtools_? coz i tried to download it from somewhere else and it had virus
Click to expand...
Click to collapse
hi m8!
i'll try and upload the set of tools shortly. You can get it in any of the kitchens posted for the i780 here. I'll however consolidate them and add it in this post as an attachment!
Part 3 - very soon
cheers!
You guy thanks for sharing your experience at cook ROMS,I whink I need this for my SmartPhone.
Hey guys, just dropped the next part of the series on the blog. Check out http://i780romdev.blogspot.com
Of course, the same theory, tools and understanding goes to cook for any other device too
cheers
kitchen tools attached in the first post.
enjoy
dreamtheater39 said:
Hey guys, just dropped the next part of the series on the blog. Check out http://i780romdev.blogspot.com
Of course, the same theory, tools and understanding goes to cook for any other device too
cheers
Click to expand...
Click to collapse
yeah, now i am reading part 3 and u really teach very well! i think i will cook my own room soon with ur help i wanna ask a question if i dont want ms office and internet explorer in my rom which folders should i delete? i wanna add different office program
benveq said:
yeah, now i am reading part 3 and u really teach very well! i think i will cook my own room soon with ur help i wanna ask a question if i dont want ms office and internet explorer in my rom which folders should i delete? i wanna add different office program
Click to expand...
Click to collapse
To remove a package, you can get rid of the corresponding folders in your SYS folder. But its not recommended that you knock off office/ie as they might be referenced within other apps. You can always take it off, build a rom and see if everything works fine
For example, to remove IE, just delete your Browsing, Browsing_DPI_xx and Browsing_Lang_XXXX, BROWSINGCORE, browsingie, browsingie_LANG_XXXX folders. That should get rid of IE for you! Then you need to recreate your bin!
cheers
thanks a lot for kitchen tools and ur explanations! i read ur blog all the time great work!!
The next post is up
cheers
dreamtheater39 said:
The next post is up
cheers
Click to expand...
Click to collapse
yes i read it, and u r teaching with examples it is great
i have two problems while i am using ervius pkgtools
1. when i open dumo folder it shows
[Missing Manifests]
(Maybe):\ROM\XIP\45116509-e364-4775-9098-c25f0b1fbac2.dsm
(Maybe):\ROM\XIP\d92a4f0a-378a-4482-8fd3-bd127a05e4de.dsm
(Maybe):\ROM\XIP\723fb954-d931-4348-b672-82a188e587b5.dsm
(Maybe):\ROM\XIP\1a22bb67-d4c4-7bb4-c5d2-75cb3a85c45b.dsm
(Maybe):\ROM\XIP\449da4ef-e9c1-5cb4-2ec5-fb9b4c27a865.dsm
are these important dsm files?
2. when i press build packages it gives this error:
not found: select .os file to extract XIP
and i extract xip file using osbntool as xip.bin
any solutions for both of these?
benveq said:
i have two problems while i am using ervius pkgtools
1. when i open dumo folder it shows
[Missing Manifests]
(Maybe):\ROM\XIP\45116509-e364-4775-9098-c25f0b1fbac2.dsm
(Maybe):\ROM\XIP\d92a4f0a-378a-4482-8fd3-bd127a05e4de.dsm
(Maybe):\ROM\XIP\723fb954-d931-4348-b672-82a188e587b5.dsm
(Maybe):\ROM\XIP\1a22bb67-d4c4-7bb4-c5d2-75cb3a85c45b.dsm
(Maybe):\ROM\XIP\449da4ef-e9c1-5cb4-2ec5-fb9b4c27a865.dsm
are these important dsm files?
Click to expand...
Click to collapse
This is not important....ignore them, its normal
benveq said:
2. when i press build packages it gives this error:
not found: select .os file to extract XIP
and i extract xip file using osbntool as xip.bin
any solutions for both of these?
Click to expand...
Click to collapse
When you start, it asks if you would like to run build xip.bat.....just hit NO for that....
trojan reported in the attachment
Win32/TrojanDownloader.Zlob.NBP
false alarm?
well last night i finished my own wm6.1 build 20270 128dpi pdxib1 according to your guide i wanna tell what i did to complete it ;
1.i exctracted my rom using i780 kitchen and i got dump folder and i also added some extra tools like ervius buildos,osnbtool etc...then i used pkgbuildos to seperate folders into oem and sys
2. i used oem part from krizky82's kitchen and i add some extra packages using ervius package creator 2.7 and add them with oem_blahblah to oem folder.
3. i deleted windows live and msn messenger from sys folder and copied netcf 3.5 and flashlite v3.1 from krizky82 kitchen. i also used his initflash and rgu file coz i had same structure almost(oem totally same and sys programs also)
4.i looked at both efn's kitchen and krizky82 kitchen and i saw that they have this structure oem,sys and rom and in rom there is xip folder. when i looked at inside xip folder i saw that there is only coredll.dll folder and others are dsm rgu and boot files so my next step
5. i used osbn tool to exract xip.bin and after i got that xipkitchen_beta6 and i choosed the same donor and original and after extracting i got original xip files and i ordered in same structure like efn's kitchen
6.then i used pgkbuildos and let the process starti had some dsm duplicate errors and i delete duplicated ones and later i didnt start xip extract bat and flashable bin bat so after process again i had temp/dump folder
7. during buildos there wasnt any error and i was happy about it
8. using inputTXTFileMaker ( thanks to u dreamtheather93) i got input text and after that using these commands;
mgfsfromdump imgfs_raw_data.bin new_imgfs.bin
del imgfs_raw_data.bin
ren new_imgfs.bin imgfs_raw_data.bin
make_imgfs i780.nb0.payload.body -nosplit
merge i780.nb0.payload.header i780.nb0.payload.body i780.nb0.payload
nbmerge -data 2048 -extra 8 i780.nb0 -conservative
and conv3 input.txt > conv3_output.txt
ren i780.nb0.b000ff !!i780_flashable_bin.bin
i got my flashable bin file yupiiiii i controlled the size of flashable bin and it is 86.2 mb and the size of dump folder almost 125 mb i hope it is ok
now i will flash my phone but is there any possibility that my phone can be bricked ?
thanks a lot for ur guide again!!!
note: i already used i780.bin as 12mb page pool size i did it before kitchen using osbn tool
good job m8
You cant really brick your i780 because of this I've done way crazier stuff....like trying out omnia's xip, drivers of omnia on i780....and nothing's given way
However, i'm hoping you've ported your XIP accurately, and i'm unsure how've you've built your SYS folder.
but, go ahead and flash and see if it boots nothing to be paranoid if it doesnt boot/hangs at startup/throws an error and fails etc. etc. If any of this happens, then we could troubleshoot it together
cheers & good luck
Great job!
Nice start San!
Not even some days left from your first successful cooking and you already best gid on it!
Keep on do it. And we wait for new mods for our best touchphone!
I think now anyone is able to break Eagles wings =P

[ROM][WWE]ASUSP835 6.5.3 build 28002 (last updated: 10-12-09)

Hello everyone,
here's the wm6.5 rom for asus p835.
last updated: 10-12-09
http://cid-cf1603cd2858a369.skydrive.live.com/browse.aspx/PUBLIC
So far tested everything ok except Garmin XT not working anymore. Cant even start the application. Please let me know if you find otherwise.
btw, as usual, you use this rom at your own risk as you should understand there's always risk when flashing rom to your mobile... blah blah blah..
------------------------------------------------------------------------------------------------------------------------------------
[14-12-09]
I guess most of us p835 users have to use our own effort to build the rom for this phone.
Here i will give you some guide how I did building the ROM. Hopefully we can gather more intelligence to make a nicer ROM for this phone.
first off, I will explain how to properly extract xip/sys from the original ROM. With these only you can modify it's system.
Tools needed: p835abisplit2.exe, osnbtool.exe
1. rename the original ROM you downloaded from asus site. Rename to G5.exe. run command: "p835abisplit2 g5.exe". You will now get a file FLASH.BIN.
2. Now we need to work with FLASH.BIN. Using OSNBTOOL, put in command "osnbtool -sp flash.bin", you will get something just like below:
OS ROM Partition Tool V1.59 By Weisun :> PDAclan.com
Sector size : 0x00000800
Extra data bytes : 0x00000008
OS IMAGE found.
Partitions infomation:
**************************************
Part-0 type: BOOT SECTION image
Part-1 type: XIP RAM Image
Part-2 type: IMGFS file system
Part-3 type: legit DOS partition
**************************************
Found BIN_FILE structure in source file.
Records: 0x0000036D RecordsSize: 0x06E10328
StartAddr: 0x01030200 ---------------->we need this address when we repack flash.bin. Check if yours is the same with this?
flash.bin.Header written.
3. command: "osnbtool -sp flash.bin.BIN.NB0"
4. command: "osnbtool -d flash.bin.BIN.NB0.OS.NB 2 imgfs.bin" --> you'll get imgfs.bin
5. command: "osnbtool -d flash.bin.BIN.NB0.OS.NB 1 xip.bin" --> you'll get xip.bin
6. command: "imgfstodump imgfs.bin" --> with this, you'll get a "imgfs" folder. You'll need to make it into a easy to use package. rename the folder to dump.
7. command: "packagebuilder dump" --> you will see inside dump folder, you have all files packed into different folders. You wont be able to see a single file in dump folder. if you do, probably packagebuilder unable to recognize them or something wrong with the files(i'm not sure what to do then). The most important thing in dump folder are the folders with letters starting with OEMxxxx and .ROM, .VM. These few folders should be retained in the new system. Others are all replaced with new system.
assume you are able to modify everything without question, you are now in the situation where you want to repack a ROM. We will need these files in the same folder: FLASH.BIN.HEADER, flash.bin.BIN.NB0.OS.NB, IMGFS.BIN.
1. You will need to repack imgfs first. using "imgfsfromdump imgfs.bin imgfs-new.bin", you get the new imgfs-new.bin.
2. assuming you already modified xip.bin, it should be in name xip-new.bin. Using "osnbtool -c flash.bin.BIN.NB0.OS.NB 1 xip-new.bin"
3. "osnbtool -c flash.bin.BIN.NB0.OS.NB.NEW 2 imgfs-new.bin", repacking imgfs
4. "osnbtool -extra flash.bin.BIN.NB0.OS.NB.NEW.NEW"
5. "osnbtool -2bin flash.bin.BIN.NB0.OS.NB.NEW.NEW.EXA 0x01030200 -cutheader", remember when we first unpack FLASH.BIN? There's a starting address which we must use here.
6. "copy/b/y flash.bin.Header+flash.bin.BIN.NB0.OS.NB.NEW.NEW.EXA.BIN os-new.nb0"
7. "p835abisplit2 /B G5.EXE" ---> you must have the original ROM G5.exe. Output is a file named "out.exe". This is a USB flash file. For me, I'd prefer a card flashing ABI file. Which I felt safer. For generating ABI file, you will need to download a flashable ABI file, rename to G5.abi and run this command "p835abisplit2 /B G5.ABI". You will get "OUT.ABI". Rename to G5_ALL_WWE.ABI to flash with an SD card.
Btw, all these are not my original works, credits to DA_G for his ROMs and guides, BEPE and others for their great tools, zhaochengw: most of the guides above is from him.
--------------------------------------------------------------------------------------------------
[16-12-09]
SYS modification:
to upgrade a sys, all you need from original ROM is .ROM, .VM and all OEMxxxxx folders. (that's all i know of). All other folders are to be deleted and replaced with folders from new builds. After you work out a complete SYS, use G'reloc to relocate address. I've tried using WMreloc, but everytime i tried doesnt boot. I'm not sure what caused the problem but at least G'reloc worked. There might be some hiccups when using G'reloc, you'll have to google abit on that. If you encountered a problem saying that there's not enough memory on slot0, try remove some of the removable directories such as office or onenote.
Once you successfully relocated, you will have to use BuildOS to pack it back. You might encounter problems like duplicated files, just delete the one not from OEM folders. after you're done, copy the DUMP folder from TEMP directory and use imgfsfromdump(step1 from second part above).
--------------------------------------------------------------------------------------------------
[19-12-09]
I'm not going to cover xip.bin porting, but i'll mention here that you will need to use xipport to manually port xip for this rom. I've tried some kitchen tools but none working. It's the same for sys porting too, you have to manually replace the files and/or change REG. After which you'll use BUILDOS to build it. Other than that, you'll need an OEM sys/xip. I'ved used D_GA's 28002 and found that his package works pretty well. You can find it here.
http://forum.xda-developers.com/showthread.php?t=544445
I'll upload some related tools together so you'll wont have to look everywhere. You can find the upload together with the ROM downloads area.
regards.
blue.
Nice working!
Thx for blue's hard working on this poor handset.
wish ASUS can fix bugs on drivers and also hope guys like u can countinue Cooking better roms!
Thanks Guy! You're the best!
Call Key,Trackball and Volume Key cannot use
blue00mountain said:
So far tested everything ok except Garmin XT not working anymore. Cant even start the application. Please let me know if you find otherwise.
Click to expand...
Click to collapse
I had this issue too. Make sure you recmod all the browsing folders, incl Browsing, Browsingie & Lang folders
Sorry, How to Flash the Rom Use ABI File?
Blade0rz said:
I had this issue too. Make sure you recmod all the browsing folders, incl Browsing, Browsingie & Lang folders
Click to expand...
Click to collapse
i'm a beginner chef, so please tell me what's the purpose of recmod? For my understanding, it is only to make files become module? what else does it do?
blue00mountain said:
i'm a beginner chef, so please tell me what's the purpose of recmod? For my understanding, it is only to make files become module? what else does it do?
Click to expand...
Click to collapse
As I understand it, not only does it make a module into a file, it makes that file use the memory available in SLOT 0 in the ROM. Modules use SLOT 1 memory be default, so I think the browsing folders have issues accessing memory across the two slots
Have a read at Da_G's thread & the Native Kernel post - he explains it a lot better than I do
Good job on the ROM!
Blade0rz said:
As I understand it, not only does it make a module into a file, it makes that file use the memory available in SLOT 0 in the ROM. Modules use SLOT 1 memory be default, so I think the browsing folders have issues accessing memory across the two slots
Have a read at Da_G's thread & the Native Kernel post - he explains it a lot better than I do
Good job on the ROM!
Click to expand...
Click to collapse
ok, now the browser problem and garmin problem solved. although not really sure what i did that made it worked. Now i'm facing another problem, asus utilities, i.e. autorotate can only work once, and then it stoped working the next time ie starts. Autocleaner does not work at all. Any ideas?
Is there anyone testing my rom anyway?
regards,
B
I have test your ROM.It is very good.Sometimes any programs can be down.
Hi Blue00mountain
Thanks for your hard work, downloading.... hunger for P835 rom,
Read form other thread and noted that WM6.5.3 build 28002 was not as stable and fast as 28003 or later, would you consider to move on to newer version, thanks so much in advance.
blue00mountain said:
Hello everyone,
here's the wm6.5 rom for asus p835.
last updated: 10-12-09
http://cid-cf1603cd2858a369.skydrive.live.com/browse.aspx/PUBLIC
So far tested everything ok except Garmin XT not working anymore. Cant even start the application. Please let me know if you find otherwise.
btw, as usual, you use this rom at your own risk as you should understand there's always risk when flashing rom to your mobile... blah blah blah..
regards.
blue.
Click to expand...
Click to collapse
Thanks, that's great. BTW, I am start reading about porting XIP, would you mind telling me how to port XIP and how to test the ROM before hardware flashing the ROM?
leofong2022 said:
Thanks, that's great. BTW, I am start reading about porting XIP, would you mind telling me how to port XIP and how to test the ROM before hardware flashing the ROM?
Click to expand...
Click to collapse
There's quite some information on the web regarding xip porting. I felt that XIP is quite straight forward, not much problem. The problem I felt so far lies in SYS porting, and a chance to get a good OEM unmodified rom.
And there isnt any emulator to test rom. YOU WILL NEED TO FLASH INTO PHONE TO TRY IT OUT. However, this phone has a nice bootloader, which it checks for rom integrity before flashing. if you rom is incorrect, it doesnt allow to flash at all. Basically it is quite safe unless you messed something other than xip sys itself.
Thx blue!
anyway,the solution of unpack and repack P835 ROM may have another way:
follow steps are from hdubli,and hope can help everyone to Cooking ROMs!
---------------------------------------------
@ECHO off
ECHO Preparation
del flash.bin
del os-new.nb0
del flash.bin.bin.nb0.bin
del G5_ALL_WWE.abi
pause
TOOLS\p835abisplit2 g5.abi
ren os.nb0 flash.bin
TOOLS\osnbtool -sp flash.bin
TOOLS\nbsplit -data 2048 -extra 8 flash.bin.bin.nb0
copy flash.bin.bin.nb0.payload ROM\flash.bin.bin.nb0.payload
pause
ECHO Building OS
pause
TOOLS\BuildOS.exe
ECHO Realocating Modules
pause
TOOLS\WMReloc -gtemp\dump -llog.txt
ECHO Next: Build the rom...
pause
copy imgfs.bin temp\imgfs.bin
cd temp
..\TOOLS\ImgfsFromDump imgfs.bin imgfs-new.bin
cd..
copy temp\imgfs-new.bin
pause
TOOLS\insert -i imgfs-new.bin -o flash.bin.bin.nb0.payload -d 0x00460000 -s 0x5fdfff0
pause
TOOLS\insert -i 21812.bin -o flash.bin.bin.nb0.payload -d 0x00180000
pause
TOOLS\nbmerge -data 2048 -extra 8 flash.bin.bin.nb0 -conservative
pause
TOOLS\osnbtool -2bin flash.bin.bin.nb0 0x1030200 -cutheader
pause
copy /b/y flash.bin.header+flash.bin.bin.nb0.bin os-new.nb0
pause
TOOLS\cvrtbin os-new.nb0
ECHO Check the Out Put
pause
TOOLS\p835abisplit2 /b g5.abi
ren out.abi G5_ALL_WWE.abi
pause
del flash.bin.bin.nb0
del flash.bin.bin.nb0.payload
del flash.bin.header
del flash.bin.bin.nb0.extra
del imgfs-new.bin
pause
---------------------------------
Hi Blue,
Thanks for your details cooking step, I've done all the way to the dump folder, and after repack the dump folder using packagebuilder, I got a "info.txt" file and a "sys" folder, I leave everything untouch and try to repack imgfs, however I always get error as below after runing the command imgfsfromdump:
>imgfsfromdump imgfs.bin imgfs-new.bin
ImgfsFromDump 2.1rc2
Using compression type 'XPR'!
Sector size is 0x800
Processing "info.txt" as file
Processing "SYS" as module
then error message pop up "ImgfsFromDump.exe has stopped working"
Have you ever got this error? Did I missing something here, please help, thanks.
lizard999 said:
Hi Blue,
Thanks for your details cooking step, I've done all the way to the dump folder, and after repack the dump folder using packagebuilder, I got a "info.txt" file and a "sys" folder, I leave everything untouch and try to repack imgfs, however I always get error as below after runing the command imgfsfromdump:
>imgfsfromdump imgfs.bin imgfs-new.bin
ImgfsFromDump 2.1rc2
Using compression type 'XPR'!
Sector size is 0x800
Processing "info.txt" as file
Processing "SYS" as module
then error message pop up "ImgfsFromDump.exe has stopped working"
Have you ever got this error? Did I missing something here, please help, thanks.
Click to expand...
Click to collapse
i found there's some problems when u use the imgfsfromdump tool to make imgfs-new.bin
imgfsfromdump can't proceed the SYS folder,it can only deal with original "DUMP" folder
that means,when u dumped out the "DUMP" folder and use pkgtool(or packagebuilder) proceed it into models(SYS、OEM...ETC),u have to use BuildOS.exe rebuild all the files in SYS OEM.the result of BuildOS's rebuild just like the original "DUMP" folder.then u can use imgfsfromdump to make a imgfs-new.bin
Sorry about my poor English...
well,i still try to show u the way i repack imgfs.bin wihtout change anything.
1st, get the imgfs.bin
2nd,use imgfstodump and get the "dump" folder
3rd,use imgfsfromdmp directly,i get the imgfs-new.bin
blue00mountain said:
There's quite some information on the web regarding xip porting. I felt that XIP is quite straight forward, not much problem. The problem I felt so far lies in SYS porting, and a chance to get a good OEM unmodified rom.
And there isnt any emulator to test rom. YOU WILL NEED TO FLASH INTO PHONE TO TRY IT OUT. However, this phone has a nice bootloader, which it checks for rom integrity before flashing. if you rom is incorrect, it doesnt allow to flash at all. Basically it is quite safe unless you messed something other than xip sys itself.
Click to expand...
Click to collapse
ic, but i find that the xip size should be ~3200kb, is it just omit it during compling the xip?
In addition, do you mean it is just simply that just using Da_G's build with Da_G's MSXIPKernel + initflashfiles.dat and original P835 OEMXIPKERNEL is ok?
Sorry for my question because I know less on the OS complie, thanks
leofong2022 said:
ic, but i find that the xip size should be ~3200kb, is it just omit it during compling the xip?
In addition, do you mean it is just simply that just using Da_G's build with Da_G's MSXIPKernel + initflashfiles.dat and original P835 OEMXIPKERNEL is ok?
Sorry for my question because I know less on the OS complie, thanks
Click to expand...
Click to collapse
i don't think the XIP size should be 3200kb,anyway,in the Traditional Chinese version Rom,the size of XIP is more than 4200kb.
based on my experience, you dont need to have an exact same size for xip.bin. not sure if it will cause any problem but It will start anyway.
regarding your repacking dump question, the proper sequence i think is:
imgfstodump-->packagebuilder-->greloc-->buildos-->imgfsfromdump = imgfs-new.bin
blue00mountain said:
based on my experience, you dont need to have an exact same size for xip.bin. not sure if it will cause any problem but It will start anyway.
regarding your repacking dump question, the proper sequence i think is:
imgfstodump-->packagebuilder-->greloc-->buildos-->imgfsfromdump = imgfs-new.bin
Click to expand...
Click to collapse
Since I saw the p835abisplit2 creator starkwong said that (若要修改 XIP,請確保重新嵌入 nb0 前的 XIP 大小是跟原來的相同,否則刷機後會開機失敗)
-> if modifying XIP, please ensure the re-embedding nb0 XIP size is same as original XIP size, otherwise it may cause turn-on (mobile) failure after flashing.
If it is ok, that's great

Categories

Resources