Related
Those who have troubles with other HardSPL versions can give the attached 1.23 (shipped), 1.24 (mfg), 1.34 (shipped) HardSPLs a try.
To flash any of these, first establish an activesync connection via usb. Then run diamond-sspl.bat and confirm execution on touchscreen. The screen will turn black. Now run DiamondCustomRUU from either the HardSPL-1.23, HardSPL-1.24 or HardSPL-1.34 folder.
I have tested these versions on my diamond and did not have any issues with them. I prefer 1.24 because it is a mfg spl. A mfg spl includes additional commands for the manufacturer (htc) to test a device as opposed to the shipped spl which is installed on stock devices.
A particular spl may fix bugs, may be needed to support new hardware (e.g. lcd or touchscreen) or is required to optimally support a particular version of the OS and/or radio. Only try another spl if you have issues with your currently installed one. If you have no issues then don't flash another spl.
Further questions about spl are answered here
Credits:
1. cmonex for the wonderful relocation hack in sspl
2. pof for JumpSPL
perhaps my memory is bad, but the MFG we based Hard-SPL on is the same version as this or newer possibly, I'll find out later.
closing the stable door after the horse already bolted?
Thanks.
Good to see you here on the diamond forum, jockyw2001
After the great work you did for the kaisers hope it will be the same for the diamond.
Great works again Jocky..
Thanks u so much..
Installed 1.24.Hard version.Working fine in my device
Olipro said:
perhaps my memory is bad, but the MFG we based Hard-SPL on is the same version as this or newer possibly, I'll find out later.
Click to expand...
Click to collapse
no they're different, and possibly 1.24 is older if u left the version# untouched
closing the stable door after the horse already bolted?
Click to expand...
Click to collapse
no, for sure not
will try later
i have tryed others...and they just sit at 0%
im no n00b.....i do know what i am doing
Hey! JockyW is here!
Yey, JockW is here. I love your works in Kaiser sections. Welcome, friend.
jockyw2001 said:
Those who have troubles with other HardSPL versions can give the attached 1.23 (shipped) and 1.24 (mfg) HardSPLs a try.
To flash any of these, first establish an activesync connection via usb. Then run diamond-sspl.bat and confirm execution on touchscreen. The screen will turn black. Now run DiamondCustomRUU from either the HardSPL-1.23 or HardSPL-1.24 folder.
I have tested both versions on my diamond and did not have any issues with them. I prefer 1.24 because it is a mfg spl.
Credits:
1. cmonex for the wonderful relocation hack in sspl
2. pof for JumpSPL
Click to expand...
Click to collapse
Hi man, happy to see you here ( i still owe you from radio from hell!!!)
i have a noob question: whats the difference between this hardspl and Olinex version? and do i hjave to change it?( i already have olinex developers edition)
Thanks jocky bro..!
It works just fine
i installed 1.24... it works although i can't see anything special.
@JockyW2001
Can this HSPL be overwritten for warranty returns with original SPL or it also must be signed by your special certificate first? I am referring to OliNex-unsigned "back-to-original-SPL" method.
SecureGSM said:
@JockyW2001
Can this HSPL be overwritten for warranty returns with original SPL or it also must be signed by your special certificate first? I am referring to OliNex-unsigned "back-to-original-SPL" method.
Click to expand...
Click to collapse
You can flash any signed spl with this sspl. Which signature is used doesn't matter: self-signed, olinex, or htc it doesn't make a difference.
works thank you
this now lets me flash what ever i want
before i was getting stuck at 0%...grrrrrr
thank you for this...you are a star!
Great release Buddy still using your first beta
HardSPL v1.34 added to first post.
jockyw2001 said:
HardSPL v1.34 added to first post.
Click to expand...
Click to collapse
thanks for update.I looking for 1.37 and 1.93 SPL in next times
I am confused which one to install?
What is mfg?
Which is better?
Sorry for all questions at once but i am really confused.
BTW i have olinex 1.40 dev edition.
Mfg spl version includes additional commands for the manufacturer (htc) to test a device as opposed to the shipped spl which is installed on stock devices.
A particular spl may fix bugs, may be needed to support new hardware (e.g. lcd or touchscreen) or is required to optimally support a particular version of the OS and/or radio. Only try another spl if you have issues with your currently installed one. If you have no issues then don't flash another spl.
Further questions about spl are answered here
jockyw2001 said:
Mfg spl version includes additional commands for the manufacturer (htc) to test a device as opposed to the shipped spl which is installed on stock devices.
A particular spl may fix bugs, may be needed to support new hardware (e.g. lcd or touchscreen) or is required to optimally support a particular version of the OS and/or radio. Only try another spl if you have issues with your currently installed one. If you have no issues then don't flash another spl.
Further questions about spl are answered here
Click to expand...
Click to collapse
Thanks for the quick answer. It explained everything that i needed to know.
so many hard-spls, so little time
k sorry this sounds so noobish but i've never seen so many hard-spl's in one forum before ha..
so you're basically saying if people are having trouble flashing with the other hard-spl (do you have any explanation as to why this is?) they should just try each of these and see which one works?
i guess what i'm wondering is why would 1.23hard-spl work better for someone than 1.34? what i'm guessing right now is, 1.24 is MFG so should work better in most instances, but technically the best 'fit' would be a hard-spl based on your shipped spl?
hi guys,
i have hard spl my phone for the first time. i realised as soon as the phone restarted the screen was a bit different, kinda fuzzy or jumpy. did it happen to anybody else or is just me encountering it for the first time.
thanks in advance....
Read This...
Here...
which HARDSPL did you load?
Hello, Before opening this thread you should have used the search button.
Now answer to your question. Yes that is normal that your screen will flicker because the hard spl version you have installed is not compatible with your device. Please install the 1.37 version and if you still have problems then install the 1.93 version. Here is the link http://forum.xda-developers.com/showpost.php?p=2312363&postcount=2
thanks alot sumi... and windowz.. i just used olinex 1.37 and its sorted.
thanks alot guys. cheeers
Guys,
Currently stuck with 1.37 orange ROM on my orange HTC Touch and want to replace the ROM with one of these new up to date ROMS but I have a problem :-(
Have downloaded HardSPL_Olinex137_Unsigned.zip to flash the phone but when doing this all I get is the phone sittong at 0% and doesnt process the update!!!
Have followed all the checks before updating but just wont move from 0%!!!
Any ideas would be great!
Cheers
D3tox
I had this issue and so use the 1.24 SPL and have had no problems at all on my Orange Diamond
1.24 Works Fine On Orange
you do mean touch diamond...and not a touch??????
just checking
here is a link for you
http://forum.xda-developers.com/showthread.php?t=408621
d3toxuk said:
Guys,
Currently stuck with 1.37 orange ROM on my orange HTC Touch and want to replace the ROM with one of these new up to date ROMS but I have a problem :-(
Have downloaded HardSPL_Olinex137_Unsigned.zip to flash the phone but when doing this all I get is the phone sittong at 0% and doesnt process the update!!!
Have followed all the checks before updating but just wont move from 0%!!!
Any ideas would be great!
Cheers
D3tox
Click to expand...
Click to collapse
HardSPL also comes with the software unlocker hspl v1.23 or 1.24. so if you have done the software unlock, that means you have already upgraded to the best hardspl. if not go for the unlocker, very easy to use and comes with complete instructions.
problem you are getting might be due to bootloader or usb problem
hehe oops yup i meant the diamond ;-)
cheers guys ill give 1.24 a go and let you know!
D3tox
** Who dares wins! **
xdaking said:
HardSPL also comes with the software unlocker hspl v1.23 or 1.24. so if you have done the software unlock, that means you have already upgraded to the best hardspl. if not go for the unlocker, very easy to use and comes with complete instructions.
problem you are getting might be due to bootloader or usb problem
Click to expand...
Click to collapse
just tried running v1.24 from the above link given by liamhere and is still just sitting at 0% when running update.
which part is the unlocker? Sorry just a newb to the HTC ROM updating
1.24 didn't work on my orange (stuck on 0%). 1.40 worked fine.
If I remember correctly connect diamond to PC adn then double click on diamond_sspl and follow the instructions, then run the RUU in the 1.24 folder by double clicking on it.
AGxN you diamond! that sorted it! Next question
which ROM is best going for?
d3toxuk said:
AGxN you diamond! that sorted it! Next question
which ROM is best going for?
Click to expand...
Click to collapse
belite
swiftbl
duttys
???
Im A Dutty Man Myself...
but try this http://forum.xda-developers.com/showthread.php?t=405728
i was most impressed...i have like many here used all the roms
good luck and have fun in this forum
I am a Dutty's lady but am tempted to try swiftbl or Panoshas new ones - will have a play tonight.
cheers!
Ill give them all a go
thx to everyone again!
AGxM said:
I am a Dutty's lady but am tempted to try swiftbl or Panoshas new ones - will have a play tonight.
Click to expand...
Click to collapse
using Panoshas new one now......its very good you know
just tried a few of the ROMS and really liking the Shine On 1.5 ;-)
hi guys
as you can see im a total noob to the forums and to updating ROMs on the diamond
my htc diamond is running rom version
version: 1.37.707.1 WWE
date: 06/10/08
radio version: 1.00.25.03
protocol version: 52.26a.25.09H
i find that phone lags a bit and slows down especially when im unlocking with my password.
it also lags a bit when im activating the keyboard to write a sms..
so i guess i was hoping somebody could guide me in the right direction to get the latest rom update, and how do i do it.
i can see there are some custom roms around...so i have no idea whats the best way to proceed..
ive tried to download the latest rom update from the HTC site but it says that my device is not supported?
i dunno, cause i entered in the serial number located under the battery...
so im hoping somebody here can help me out..
thanks!
subs.
More info...
What's your diamond model number? It's under the battery.
You should look into HardSPL and then check out the official ROM's and Cooked ROM's and make a decision on which one you want to flash your phone with. Read the forum's and how-to's for more info...but first you should work out what version of the diamond you have before you go looking for ROM's...also, always HardSPL before you flash!
Good luck.
under the battery it says
HTC P3700 DIAM100
is that what you are referring to?
hi you really need to read this first and then read it again http://forum.xda-developers.com/showthread.php?t=416211 or you could brick your phone
cobbs said:
hi you really need to read this first and then read it again http://forum.xda-developers.com/showthread.php?t=416211 or you could brick your phone
Click to expand...
Click to collapse
yeah, ive been reading that and im slowly starting to understand what i have to do...
i would like to do this rom update on my phone
http://forum.xda-developers.com/showthread.php?t=423418
so from what i understand i first have to install a unsigned hardspl, any recommendations on which version i should use?
1.23
1.24 or
1.34 ?
i was going to use 1.24 only because i saw somebody post saying they used it and had no problems, but if i should use one of the other ones because it will work better then please let me know.
after doing the hardspl install i was going to backup all my contacts and then do the rom update.
am i missing any steps?
do i have to do a radio update before a rom update?
I use HardSPL 1.40 and had no problems so far so I havent updated it to 1.93.
I would recommend one of the new roms 2.03 (official or cooked, it depends on what you'd like ).
Prewien said:
I use HardSPL 1.40 and had no problems so far so I havent updated it to 1.93.
I would recommend one of the new roms 2.03 (official or cooked, it depends on what you'd like ).
Click to expand...
Click to collapse
ah ok
so
if i can install hardspl 1.40 and this rom http://forum.xda-developers.com/showthread.php?t=423418
and shouldnt have any problems?
is that what im understanding?
Substance001 said:
ah ok
so
if i can install hardspl 1.40 and this rom http://forum.xda-developers.com/showthread.php?t=423418
and shouldnt have any problems?
is that what im understanding?
Click to expand...
Click to collapse
Install hardspl 1.40 or 1.93 (I use 1.93, but didn't have problems in the short time I used 1.40) hardspl and then install any rom you like. Just try to read as much as you can because chances are, any question you have, someone else has had it and it's on the board for you to read.
ok cool, i will install hardspl 1.40 and then that rom i mentioned
at the moment i dont have any questions, i will follow that thread that explains how to update roms and hope for the best
1 last question, i did do a search but didnt really find any definite answers...
if i brick my phone *touch wood i dont*
will it be difficult to unbrick it?
Substance001 said:
1 last question, i did do a search but didnt really find any definite answers...
if i brick my phone *touch wood i dont*
will it be difficult to unbrick it?
Click to expand...
Click to collapse
if you brick your phone, the only option left is to claim warranty.
And i believe the only step that could possibly brick your phone is flashing HardSPL, right guys?
I was in the same state of anxiety when I did my first ROM flashing. Thankfully it all went smoothly.
My 2 cents :
1, Think about what you are gaining by a ROM upgrade. If your phone is working well out of the box and your routine functions are satisfied, you are well off with you stock ROM. I flashed a couple of ROMs and now I am with my stock and I am perfectly fine.
2, Read this -> http://forum.xda-developers.com/showthread.php?t=416211 and this -> http://www.modmydiamond.info/ And if you understand every single letter of it only proceed.
Happy flashing
i have a diam100. can i flash it to a WWE dutty rom?
thanks for all the help guys, but i decided to flash my htc with the original rom from the htc site.
for the moment it runs like a dream and has fixed all my lag issues.
so im gonna stick with that....for the moment
It's important that you feel comfortable crossing over......but I have to say, when you decide to cross, it's an exhilarating feeling to know that you can select what ever Rom from, what I think are, top notch chiefs here but also the fun continues by selecting which ever Radio.
Many post on here that say, "I bricked my phone," truly didn't brick anything. They just hit a wall so they panic. Hard SPL really does a good job. So the chances of your bricking this device is not as high as some people think..
Hi at all,
i just tried to flash my XDA Diamond with following ROM:
SUN Y 1.2 WM 6.1 - Manila 2.5.1921 by Kisja
Inside the extracted file a find the .NBH file, CustomRUU and PagePool_Changer.
So i don't know what to do with the PagePool_Changer, think i don't need it.
I tried to flash my XDA with the CustomRUU, when i open this, a PDA Update Utility vers. 3.27.4.3 will be started. I followed all the steps, then it started to flash, but it stays at 0%. Then it tells me to recover..so i did.
Then i tried it with the Signed and Unsigned HardSPL-Diamond-Olinex...same thing -.-
So i flashed SPL-1.30.OliNex on my phone, checked if it was on my phone and it is.
After that, i tried all the things from above again but it didn't help.
So what do i do wrong? It can't be so difficult to flash a ROM can it?
Thx 4 ur help
PS: If u wanna help me quiet fast, my icq number: 495445657..thx^^
i try this rom and its running with no probleme
Inv1ctus said:
Hi at all,
i just tried to flash my XDA Diamond with following ROM:
SUN Y 1.2 WM 6.1 - Manila 2.5.1921 by Kisja
Inside the extracted file a find the .NBH file, CustomRUU and PagePool_Changer.
So i don't know what to do with the PagePool_Changer, think i don't need it.
I tried to flash my XDA with the CustomRUU, when i open this, a PDA Update Utility vers. 3.27.4.3 will be started. I followed all the steps, then it started to flash, but it stays at 0%. Then it tells me to recover..so i did.
Then i tried it with the Signed and Unsigned HardSPL-Diamond-Olinex...same thing -.-
So i flashed SPL-1.30.OliNex on my phone, checked if it was on my phone and it is.
After that, i tried all the things from above again but it didn't help.
So what do i do wrong? It can't be so difficult to flash a ROM can it?
Thx 4 ur help
PS: If u wanna help me quiet fast, my icq number: 495445657..thx^^
Click to expand...
Click to collapse
Choose a different HSPL, go for 1.40 or 1.93. I had the same problem.
Could you please tell me exactly what you have done?
Every step and which SPLs you used?
Did you only use the CustomRUU from the download file?
That would be very nice
Otherwise i am about to desperate
sraaj: okay, i am going to try it right now^^
I could write my version, but if you look at sticky number 3, that has everything. I followed it and it worked just fine....
http://forum.xda-developers.com/showthread.php?t=416211
just that 1.30 did not work, so I used 1.40 which is in the post above... also i hope its not CDMA, since the above is for GSM models..
Could anyone give me a link to download HSPl 1.40 or 1.93 please?
I seem to be too stupid to find another one than 1.3
Edit:
Well, i now found a 1.93 and a 1.40 but they seem to be the same as my 1.3
Does anyone have a link with the version i need?
2. Edit:
I found an 1.40 .... finally
so now i try it again
It is updating right now, with HSPL 1.40..oh guys i hope so much that it works in the end
.....And did it work?
So now it's done.
It works
The Problem was that i tried to flash with HSPL 1.30 and not with 1.40
With 1.40 it worked fine
Big thanks for your help guys
Inv1ctus said:
So now it's done.
It works
The Problem was that i tried to flash with HSPL 1.30 and not with 1.40
With 1.40 it worked fine
Big thanks for your help guys
Click to expand...
Click to collapse
Congratulations
Yes, that was precisely my problem. with 1.40 everything works.
I upgraded to 1.93 but dont know why, just cuz it looks to be a higher version...
So now you can spread the knowledge, and keep helping our junior members...