Hi to all;
Case is a PDA2K(PH20B).User brought this to me with the following condition to me.He says phone was ok and working and he's been installing some non-sense free ware to the phone.Suddenly phone restarts like the time you press reset button but LCD is flickering and has bad display.He had made a hard reset but condition is the same.
LCD calibration is ok and LCD gets ok after a while(3 to 5 minutes) and starts installing the needed softs.Then phone makes automatic reset but sticks like in hibernation and won't work till you perform hard reset and story starts from beining
What i've already done:
It had win2003 and i upgraded to "PDA2k_Arabic_14000_169_11200" but nothing changed
Any idea what can be the solution plz?
MMC card is already removed.
Related
HI All, have an intersting problem, was surfing the net via wireless when the unit locked up. Soft reset and now all I get is a white screen. The unit seems to hard reset with the startup sound that the unit makes when you first start it up out of the box, but the screen stays white.
Any Ideas? :roll:
mmm.... Hard Reset :twisted:
HI Xeon,
tried that and still comes up with white screen, but does all the correct things re sounds but all you can see is a totally white screen.
You could try leaving it with the battery removed overnight but it sounds like a hardware problem to me, could be the lcd has died or the connection has come adrift for some reason.
I suggest u Upgrade or reinstall the ROM , maybe something happened to one of the files that should not be modified , anyway , u won't lose anything , u already Hard.Rstd .........
i had the same problem before..i did an upgrade that fixed it. but still have a backup even if its a white screen..after i upgraded i had another problem with the Storage Folder missing..and the list goes on..dont wory you'll know what i mean when you get it..
It happened to me the second day I got my O2 XDA IIs. Hard reset didn't seem to do anything... The unit didn't response to a soft reset either... It was just frozen... I removed the battery, boxed it up and was ready to return it. The next day, just before I was about to drop it off, I was curious and did a reset and everything went back to normal... It never happen to me again... Don't know what happened :?
I have the same problem...
The phone shows white screen white it can recieve & make calls, activesync can recognize it.. But the screen still white !!
Any other suggestions for helping solve this problem..
Is this means that the LCD is dead ?? or the problem in its connectors or it's a software prob. ???
Ok has that anyone had this issue with their Orbit?
I had noticed that the keyboard was not giving me any predicted text choices while typing, so I tried to change the input method to no avail. So I decided to perform a sft reset to sort the problem.
Oh was I not happy with the result as for over 5 mins all that was happening with my phone was the screen would light up o2 screen, green screen then enter pin and reset and it would do this again and again.
So even after removing the battery for a few minutes not change once I attempted to start the phone. I even reset the device via the button on the side and it made no difference.
I was just getting ready to bite the bullet and sound off the o2 when I remembered reading on here of something similar happening so I searched and found a posting saying to try and press soft reset just after phone started. And guess what it worked after that so what I want to know is why or what I did to get my phone working again?
Any ideas guys, only thing I can add was the phone was plugged in to my workstation USB so was charging when the initial soft reset was performed while using Valksoft's space reclaimer reset option.
Thanks
JC
Ok an update the phone is now doing this everytime it is turned off. And since the last time it occurred I have been unable to get the phone to work.
Any ideas, I believe it could be a registry issue with the phone as I had recently installed a couple of programs that worked fine for a couple of days then while installing a dictionary several programs were uninstalled in error.
So after installing again this problem has arisen. It is possible that this was not th cause as I hae noticed tat the last scheduled back up was on the 22/01/07 so Monday's was not carried out possibly due to this?
my orbit has also this bug. after a soft reset he is booting up till the pin entry and then a boots again and again. Up to 5 times
Yes, my Orbit sometimes needs to reboot 4 times before it will sucessfully bring up the Home Screen. Anyone got any ideas on why???!!!??
I had enough of it doing this so I have done a hard reset and the problem has gone now just need to set everything back as I want it as backup still had the initial issue once it was retored.
I guess it was to do with the registry but not sure what exactly, maybe redundant reg keys etc?
I've experienced same problem on my dutch t-mobile mda compact III.
Happend after installing different programs, but i can't find the exact cause.
when i remove the microsd (on which i installed the programme's) the device starts en doesn't softreset when phone screen shows.
At first i thought it had to do with programs that tried to connect to gprs before even entering the pincode of the phone. But even without pincode it keeps restarting.
Happend on my 1gb microSD once en also on my 2 gb microSD.
Hope that someone knows what the cause is, so i can prevend it from happening.
Resets caused by the Memory Card Fault
Look at the posts regarding the memory card corruption if you back-up the card format it and then put it back everything is fine for a while. Not puttting a My Documents folder on the storage card usually helps with this issue...
rebooting.
hi,
as you well understand there are only 2 possibilities: software and hardware failure.
Surely, you don't want to think about hardware failure, because in this case the solution is to send it back to seller or to service center. Except for the cases caused by battery and sd card. These are 2 elements you can replace on your own easy.
However, "instability" of the device normally caused by installed software.
The first thing you do, like it or not, if you have a problem, hard reset your device.
BACKUP your DATA before hard reset!
You can try to to remove software piece by piece, but could be time consuming thing and not necessarily lead you to a good result.
Radical approach is to return device to "factory state" - hard reset.
If after hard reset you still have a problem with your device like accidentally rebooting, address to service center or ask seller to to replace the good.
regards,
rebooting.
double post.
I had the issue once... card corrupted. Had a back up so formatted the card, put data back in, issue gone.
This has happened to my orbit a couple of times. But I think if I reset by pressing the reset button on the side of the machine it only resets once. Resetting after installing apps for example from the prompt is bad, do it later by pressing the actual button. This seems to work for me but only time will tell.
my htc p3300 has reset problm
my htc p3300 restarts automatically while im calling or using net it starts autuomatically it goes till green screen where it shows wm 6.1 then restarts again n again i dnt know plz tell me is it software or hardware problm
I have a Siemens SX66 which has worked great since I got it when it came out. Recently I cracked the screen so I replaced it with a new lcd including touch screen. The screen is a geniune HTC Sony screen. After putting it together again the software was reset. It asks to touch the screen to begin. Then, it goes straight to "align screen" and asks to tap the target at each location as it moves around to align the screen.
It seems to be stuck there because I have had it cycle through the same spots (original and 4 corner spots) over and over at least 20 times without going to the today screen yet.
I tried reflashing the software and after a successful flash it still does the same thing.
Can someone tell me what to do to make this thing work again?
Same thing here :0
Did you two guys solve your problems?
I have the same problem, I am still trying to fix it. I suspect from the backup battery, since before I hard reset my SX66 all programs lost their configuration when I turn off and on again my SX66, and when I tried to realign the screen the align cycle repeated forever. Then I tried hard resetting, reflashing to various OS's and I can not pass the initial calibration screen.
Please keep me posted if someone have found the way to solve it.
Thanks !
Ok so I did a factory reset on my g2 and afterwords everything was fine but the touchscreen doesn't work and sometimes it clicks things on my phone, I can't even unlock my phone I can only use it when I do a factory reset because I can use the trackball for that, please any info would help
Ok so I've been able to still use my phone for the most part with no touchscreen (that's what I'm typing on). I've found similar issues but they all involve replacing the screen digitalizer but I'm not sure if its hardware before I buy one because I think its a aoftware issue, because when it first happened it would sometimes click things when I touched the screen but it wouldn't be what I touched
Today I realised that the screen of my phone is vibrating this was the first time. I tried to hard reset it but all the time i do it, it is the same problem. Otherwise the network is not working and when i try to do something else the hole screen become white and i can not restart it only if i take the battery out than i replace it. Yestarday it has no problem. I have almost tried everything but nothing worked. Please help! I would like to use my phone but i can't.