First I apologize for being lazy and not reading x+1 threads trying to find the answer.
I installed WM5 Storage thingie on WM6.1 and when I activate it, I get message from computer that says new bluetooth something installed but it has some problems working.
Question is, is there a program with what you can make the TyTN running WM6.1 to appear as removable storage card (especially the SD) on a computer?
Wiper said:
Question is, is there a program with what you can make the TyTN running WM6.1 to appear as removable storage card (especially the SD) on a computer?
Click to expand...
Click to collapse
WM5 Storage (version 1.8) does exactly this on my tytn running CRC's v13.0 wm6.1 rom.
WM5 storage has never worked for me on Schap's, DVH, or PDACorner
There are some compatibility settings in the newest WM5 storage, I suggest trial and error with them.
mastermarv said:
WM5 Storage (version 1.8) does exactly this on my tytn running CRC's v13.0 wm6.1 rom.
Click to expand...
Click to collapse
That's interesting, since I am too using CRC v 13.0 and it's a no go for me. The version is also 1.8.
if you disable RNDIS on activate it usually works.
Related
I'm on VP3G's WM6. The extended ROM shows about 8mbs free. If I unlock my Extended ROM, then does that mean it's an extra 8mbs of storage memory? Or program memory (which would be awesome). Is that how it works?
ThaiM said:
I'm on VP3G's WM6. The extended ROM shows about 8mbs free. If I unlock my Extended ROM, then does that mean it's an extra 8mbs of storage memory? Or program memory (which would be awesome). Is that how it works?
Click to expand...
Click to collapse
You will get it as a storage memory. Although if it was possible to have it as a program memory that would be sweet
One thing I have experienced with the ExtROM unlocked and used for storage is that most of the things that use storage card (like PIE cache and Outlook storage) will use the ExtROM if it is mounted. Thise tweaks seem to choose the forst mounted external storage and the ExtROM comes before the storage card. Not sure if that is changeable.
KarhU said:
You will get it as a storage memory. Although if it was possible to have it as a program memory that would be sweet
Click to expand...
Click to collapse
This might be a little misleading. The unlocked extended rom shows up like an additional storage card. It is not added to storage memory directly, but can be used instead of storage memory to install most programs. Hope this helps.
Regards,
Write protected
Hello...
i've installed the latest scaps release, unhide and mounted extended rom...
One trouble..... it's impossible to delete files....
Have you some solutions for this???
webtime said:
Hello...
i've installed the latest scaps release, unhide and mounted extended rom...
One trouble..... it's impossible to delete files....
Have you some solutions for this???
Click to expand...
Click to collapse
You have to CID unlock your device.
ThaiM said:
I'm on VP3G's WM6. The extended ROM shows about 8mbs free. If I unlock my Extended ROM, then does that mean it's an extra 8mbs of storage memory? Or program memory (which would be awesome). Is that how it works?
Click to expand...
Click to collapse
I've done this, and installed several apps to the Extended_ROM folder (Skype for one). Works fine for me!
i'm having similar issues. I have a TyTN with Custel 1.3 (still). The device has been flashed many times w/o any problems.
I also can swap SIM cards without any issues (unlocked).
The Extended ROM can be made visible but if I set the attribute to Unlocked it doesn't seem to do anything. I can't save files nor delete anything from the Extended ROM. The device seems also significantly slower while the Extended ROM is visible.
I'm using HTweakC to unlock the extended ROM.
Any thoughts?
look for Olipro's
Look for Olipro's ext rom unlocker. Read up on the thread and try that, it resolved the issue for me. One note: I had trouble with ext rom when I intalled programs on it and let PIE and Outlook put their temp files on it and the ext rom space became full. At this point it became unusable and I couldn't read/write/delete anything from it or format it in any way. I'm not 100% positive this is why it happened, but I'm not trying that again to confirm!
It's stable for me.
The Extended ROM on both mine and my wife's TyTn are about 90% full and they seems perfectly stable.
We don't, however, have any temp folders in there - they're all on the card or in main storage. So maybe that's a clue?
p.s. Using vp3G's 3.0 OS.
HardSPL 2.10
SPL-2.10.Olipro
IPL-1.04
I am running WM6 Custel 1.3 ROM (haven't had time to update yet).
I can mount the extended ROM but nothing from it gets deleted (access denied).
Any other ideas? I've flashed/updates radio on the device w/o any problems, not sure why the extended rom stays locked. Using HTweak to unlock (which doesn't seem to work).
figured it out... had to SuperCID the device. Surprised it wasn't as it was sim unlocked and HardSPL.
But it's all working now!
Thanks!
Hello;
In first, I would like TO THANK (in capital letter) FAMAN for his new ROM (3.3 French).
I installed it yesterday, and until now I have no trouble except in contact, there is no more the touch screen. I found it marvellous - may be in the future version.
So, I ask your help concerning the USB Storage.
I would like to reinstall my Tomtom6 and the transfert is very long by activsync.
Is there a version/software which works with wm6 to put our DEAR Trinity/P3600/spv M700 in USB mode.
Many thanks for your help.
Regards
Clement
SPV M700 under WM6 - Faman 3.3.
GSM provider: Orange
Storage card of 1Gb.
Version ROM :FR 3.3
version radio : 1.46.00.11
Protocole : 32.79.7020.19H
clmpelo said:
Hello;
In first, I would like TO THANK (in capital letter) FAMAN for his new ROM (3.3 French).
I installed it yesterday, and until now I have no trouble except in contact, there is no more the touch screen. I found it marvellous - may be in the future version.
So, I ask your help concerning the USB Storage.
I would like to reinstall my Tomtom6 and the transfert is very long by activsync.
Is there a version/software which works with wm6 to put our DEAR Trinity/P3600/spv M700 in USB mode.
Many thanks for your help.
Regards
Clement
SPV M700 under WM6 - Faman 3.3.
GSM provider: Orange
Storage card of 1Gb.
Version ROM :FR 3.3
version radio : 1.46.00.11
Protocole : 32.79.7020.19H
Click to expand...
Click to collapse
installing tomtom should only take 1 (or maybe 2) minutes maximum via active sync.
If you're talking about you map - use a card reader to transfer the map to you mini SD card. then you're only limited by the mini SD card speed.
If you have an SDHC Card you are stuck to the USB Speed of the P3600 cause I
didn't find an card reader for this cards. Its nice to have all these Cards on my 4GB Card but it's realy a pain to wait 45 minutes to copy only 1GB of data
http://www.google.com/search?source=ig&hl=en&q=SDHC+reader&btnG=Google+Search
google see a few
thanks
Hello;
Thansks for yor quick replies.
Unfortunally, I haven't got card reader for transfert data to my trinity's sd-card.
By this post, I would like to know of there were software like WM5Storage which are compatible with wm6.
I tried Wm5Storage and Softick Card Export II, but it doesn't work with my ppc.
regards
Clément
Start -> Settings -> Connections -> USB to PC -> Uncheck Enable advanced network functionality.
Wm5torage and Softick Card export must be installed in main memory.
jirkab said:
Start -> Settings -> Connections -> USB to PC -> Uncheck Enable advanced network functionality.
Wm5torage and Softick Card export must be installed in main memory.
Click to expand...
Click to collapse
From the wm5storage site you should have read before posting:
FAQ - Please Read before you ask questions in the support topic to avoid repetition
Q - I see that some people with Samsung CPU-based devices use WM5torage ok, but it does not work for me, why?
A - As far as I know from people reports, you should at least try to disable the "Advanced Networking" in the "USB to PC" options. This seem to be the particular quirk of the Samsung USB controller driver. It seem have no effect on some firmware/device versions, but still worth to try.
Ciao
usb storage
hello;
Thanks for your respond.
I will try your last answer.
thanks
regards
Clément
I had a similiar problem,
but mine work fine if I activate the wm5storage before connecting the usb cable
Hi, i have upgraded my Artemis to meschle's Touch FULL VERSION and noticed that (Start-Settings-System-StorageCard) when there is no MicroSD card inserted, i can't access also the 128MB Flash Drive...but when a MicroSD card is inserted, i can access the 128MB Flash.
Is that normal with WM6? swith WM5?
TIA
Ok after a Hard Reset, that solved the problem. Thanks
da_mayhem said:
Hi, i have upgraded my Artemis to meschle's Touch FULL VERSION and noticed that (Start-Settings-System-StorageCard) when there is no MicroSD card inserted, i can't access also the 128MB Flash Drive...but when a MicroSD card is inserted, i can access the 128MB Flash.
Is that normal with WM6? swith WM5?
TIA
Click to expand...
Click to collapse
It's strange... I had no Flash Drive neither with WM5 nor with WM6 (both original, shipped by HTC).
I have an O2 XDA orbit and used to have a 2GB SD card i it which worked fine but I have lost it. I am not looking to buy a new one and the prices have dropped so was thinking about getting a 4 or 8GB card but was wondering if my phone would be able to handle it.
Does anyone know if there is a maximum SD card size we can use in our O2 orbits?
Thanks for your time,
memory
hi,
it supports 4 gb as i have used the same with a 4 gb
a friend of mine uses 8gb, there is a "patch" for it somewhere; dont know the link atm
Obviously the one named wm6 is for wm6, the other is for wm5 (although I think they both work for wm5)
Maximum Storage Card Capacity in O2 Orbit
Hi,
inside my Orbit, a 8GB SHDC card is working. I use the Artemis Touch 4.02 WM6.1 ROM --> the SDHC support is already implemented in this ROM --> no patch needed .
Kind regards,
hqqh
Thanks everyone. I ahve the touch 4.01 so does that have the patch ?
Anthony2oo5 said:
Thanks everyone. I ahve the touch 4.01 so does that have the patch ?
Click to expand...
Click to collapse
Yes it does.
I just put a new Sandisk 8gb micro sd in my Orbit (using Artemis Touch 4.02 WM6.1 ROM) Works fine, shows as 8gb in Total Commander, but on my today screen (if I'm reading it right) it's indicating it's only 3686mb?
Have you formatted your micro sd card yet? If you decide to make sure you format it with fat32 selected.
puredreamz said:
Have you formatted your micro sd card yet? If you decide to make sure you format it with fat32 selected.
Click to expand...
Click to collapse
No. I tried format from my pc card reader but it won't detect it. I didn't try to format in the Orbit (couldn't find the option) I found another screen (storage memory or some such) where it showed as 8gb, just not the today screen.
the micro sd 4g card doesnt work on xda orbit arte 200 wm 5 regardless if its formated to FAT or FAT 32, however 2g works fine. I suppose this is the reason that on websites its written " expandable memory slot" and the value aint mentioned. If theres any way to 'patch ' it to make 4g work on wm5, i'd be curious 2 know.
btw, has any one managed to use the internet via wi fi on xda orbit arte 200 WM5. what has to b done??? mine connects to the wifi, but is unable to browse the internet for an unknown reason.
have you downloaded the sdhc.cab update here on xda???
Will allow upto 8gig(what I use in my partners orbit) may even allow larger but never tried...just do a search...
It works on ALL PPCc and wm based devices...
I use it in my i-mate pda-n (8gig card) and Orbit (standard rom which is partners) but also try a newer rom with 6.5 as is included...
I use sandisk SDHC 8GB more than 2 years and it work perfect , i have wm6.5.
cheers
32 GB MicroSDCard working without problems for a long time. Prerequisite is the sdhc.cab patch for original roms, in current roms it is mostly included.
Regards!
Steve
Can any1 having like for wm 6.5 for o2 xda orbit
???
Hi there.
I'm having a very strange problem and could not solve it so far.
I have a T-mobile MDA III. When I wanted to install a new 4GB micro SDHC, I downloaded the patch, ran it on my MDA, rebooted, inserted the memory and it all worked perfectly.
Then I got an HTC P3300 (for spare) and wanted to do the same. Installed the patch, rebooted, inserted the memory... but the phone does not recognise it.
I than ran the "go back", rebooted, inserted the old 2GB memory but now the phone no longer recognises it.
So, the MDA works ok with 4GB memory.
P3300 does not recognise 4GB memory and after "going back" does not recognise 2GB memory.
Without memory the P3300 is pretty much useless.
Can anyone please shed some light on this, please....
Thanks.
http://forum.xda-developers.com/showthread.php?t=345038
braulio_holtz said:
http://forum.xda-developers.com/showthread.php?t=345038
Click to expand...
Click to collapse
This is precisely where I got the .cab's.
And in my MDA everything works fine.
On the P3300 the 4GB memory is not recognised.
And after installing 'back2original', no memory at all is reconised, not even the 2 GB microSD (not SDHC) that I used before.
One more detail:
on MDA I have WM6
on P3300 I have WM5
Is there something specific to WM5 to teawk about?
Thanks.
...
my advice is to try flashing to a differant rom..
with a few roms i too have not been able to access my memory card..
just flash to something else
click on my signature for Uspl 1.11.cmon
youl need that to flash roms
raving_nanza said:
my advice is to try flashing to a differant rom..
with a few roms i too have not been able to access my memory card..
just flash to something else
click on my signature for Uspl 1.11.cmon
youl need that to flash roms
Click to expand...
Click to collapse
Yeah, I fear that's the only solution.
(btw, why old 2Gb sd cannot be accessed? what happened?)
I've been looking for the official WM6 rom from HTC but it no longer is on the site. Where can I find it?
...
wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
raving_nanza said:
wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
Click to expand...
Click to collapse
Thanks.
PS - Links to originals are broken, like a number of others.
Have you tried reading the card on the PC? See how it's partitioned and what kind of partition it is. Usually, you should use FAT.
I had this issue before (on my Polaris) and a format helped.
NeoS2007 said:
Have you tried reading the card on the PC? See how it's partitioned and what kind of partition it is. Usually, you should use FAT.
I had this issue before (on my Polaris) and a format helped.
Click to expand...
Click to collapse
The microSDHC was (is) formated FAT32 with only one partition. On the PC it worked fine.
Anyway, I flashed a ROM (could not find HTC original WM6 though...), applied the patch and now the 4Gb micro SDHC is working.
Still, I could not explain why, in the first try, the old 2Gb microSD stopped working.
I recon it's working now?
NeoS2007 said:
I recon it's working now?
Click to expand...
Click to collapse
Yep... but it was a real pain in the royal a**...