Develop Bugs

German Keyboard for ROM2.03

Hi everyone! Ihave The taxist´s ROM 2.03 on my magician. It´s verygood, only the keyboard+ integrated in it i don´t like, because i need german signs like ä,ö,ü,ß, that are not supported. Does anybody know a soft keyboard (Freeware if possible) with a german layout? Need it badly!

German keyboard
Try this one.

Keyboard for Magician
Thank you so much!!! This keyboard is exactly the tool i´ve been searching for!!

Hi all. I am looking for a Greek Keyboard for the same ROM (2.03.TX WWE). Could you please make any suggestions.

Greek Keyboard
Try this one

Thanks a lot Mister B, the keyboard is working fine.

The keyboard (KbdDe.cab) is fine, BUT it is increadible slow on my magician (WWE 2.03 TX ROM). I've searched the forum for a solution, but most threads are about problems with XT9, i don't think I've installed that. Any suggestions? Thanks a lot...
Problem solved: After a softreset everything is ok.

what about Lithuanian keyboard?

a1girdas said:
what about Lithuanian keyboard?
Click to expand...
Click to collapse
there are keyboard Lithuanian but dedicated to HD2 !! just try to look at http://forum.xda-developers.com/showthread.php?t=632465
I 'd suggest you'd better use VGAKEY multilingual software keyboards for Pocket PC, You can get it on http://vgakey.net/web/index.php?enfunctions

On Screen Keyboards

Hi there,
I'm usually in the Blackstone or Rhodium forums and have a mate who has the Xperia X1 and asked me about the on screen keyboards.
Looking at this phone, he only has the normal on screen keyboard which needs the stylus to be used, is there anyone out there that has the "Full QWERTY" and "Phone Keypad" Keyboards as a cab to install?
Thanks

search for FINGER KEYBOARD 2.1 or something like that. it's much better than the se kb.

nicelad_uk said:
Hi there,
I'm usually in the Blackstone or Rhodium forums and have a mate who has the Xperia X1 and asked me about the on screen keyboards.
Looking at this phone, he only has the normal on screen keyboard which needs the stylus to be used, is there anyone out there that has the "Full QWERTY" and "Phone Keypad" Keyboards as a cab to install?
Thanks
Click to expand...
Click to collapse
Are u serious?
what's the point of a software keyboard when u have a hardware one?
imho, the best solution even is to install nullkeyboard to stop the annoying software keyboard from popping up.

Try SPB Keyboard. Its great
Hi, Although u have the slider keyboard already, but for obvious reasons one may need a software keyboard too. Try SPB Keyboard (just google it and u get the links). It also gives u lot many plugins to shoose from various layouts/options of keyboard.
I have been using it for long and its works great on X1.

fingerkeyboard is by far the best!

hm.. this might help u
http://forum.xda-developers.com/showthread.php?t=487677
i am using this. its quite finger friendly for me.
hope this will help you.

amazin said:
Are u serious?
what's the point of a software keyboard when u have a hardware one?
imho, the best solution even is to install nullkeyboard to stop the annoying software keyboard from popping up.
Click to expand...
Click to collapse
Although hardware keyboards are great, you need two hands to use them. When you want to send a quick message or send something quick on Twitter etc, one hand is prefered, hence the Software Keyboard is needed.
Ravindra9 said:
Hi, Although u have the slider keyboard already, but for obvious reasons one may need a software keyboard too. Try SPB Keyboard (just google it and u get the links). It also gives u lot many plugins to shoose from various layouts/options of keyboard.
I have been using it for long and its works great on X1.
Click to expand...
Click to collapse
Never tried SPB keyboard, will have a look thanks
Jabe said:
fingerkeyboard is by far the best!
Click to expand...
Click to collapse
Yup, have used it on my Blackstone and Rhodium, very good indeed. Only problem is my friend wants the stock HTC one.
-Banana- said:
hm.. this might help u
http://forum.xda-developers.com/showthread.php?t=487677
i am using this. its quite finger friendly for me.
hope this will help you.
Click to expand...
Click to collapse
Cheers for the link

I used the Touch IT Blackstone keyboard set which includes a handy keypad, simulating a normal phone pad. I mostly use it for one-handed sms.
The filename is Touch-IT Blackstone Keyboard.cab or something, so a search would probably yield results.

nicelad_uk said:
Hi there,
I'm usually in the Blackstone or Rhodium forums and have a mate who has the Xperia X1 and asked me about the on screen keyboards.
Looking at this phone, he only has the normal on screen keyboard which needs the stylus to be used, is there anyone out there that has the "Full QWERTY" and "Phone Keypad" Keyboards as a cab to install?
Thanks
Click to expand...
Click to collapse
Tried fingerkeyboard, Blackstone and SPB one. Actually I'm with the xT9 keyboard, that id the official finger-friendly keyboard that SE ships with the R3A ROM release. It is by far the best one I've ever tried.
Try it, it's here: http://forum.xda-developers.com/showthread.php?t=494026

The xT9 is the best keyboard. The only one you can use with one hand!

hmm i'm keen too... does anyone have a working QWERTY HTC ezinput 2.x for the X1???
ones i've installed stuff around with the hardware keyboard fn keys...

ryousuke said:
hmm i'm keen too... does anyone have a working QWERTY HTC ezinput 2.x for the X1???
ones i've installed stuff around with the hardware keyboard fn keys...
Click to expand...
Click to collapse
ok....here is the cab for EzInput 2.1.19163529. its cool!! i like it.
this came with LEO rom.
http://www.mediafire.com/?3txkxhjzdom

chinee_iz said:
ok....here is the cab for EzInput 2.1.19163529. its cool!! i like it.
this came with LEO rom.
http://www.mediafire.com/?3txkxhjzdom
Click to expand...
Click to collapse
COOL does it work with the X1??? (any conflict issues with the hardware kb)?

ryousuke said:
COOL does it work with the X1??? (any conflict issues with the hardware kb)?
Click to expand...
Click to collapse
It is working fine except hardware keymapping - QWERTY FN key is not working well. need to surf to find answer..

csdhhong said:
It is working fine except hardware keymapping - QWERTY FN key is not working well. need to surf to find answer..
Click to expand...
Click to collapse
that was my issue... there's other ezinput 2.0 that i've got/tried...
and the fn keys are outputting different things...
ezinput 1.5 works BUT has smaller keys and the font is messed up (courier?)
oh well
still eager for someone to fix this issue...

what about the issue that older EzInput keyboards had with the predictive text on the X1i?
I remember when i installed 1.5 it would no longer pre-populate names as i was typing in the To: section for a text message

dont really care about t9 or predictive text...
i just want to type and use the fn key to properly output numbers rather than using sym all the time >.<

Disable XT9

On my Touch Pro I was able to disalbe XT9 by the following reg keys
Turn off
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010409
Ime File=\windows\compime.dll
Layout Text=COMP IME
To Turn on again
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010409
Ime File=\windows\eT9Ime.dll
Layout Text=eT9 IME
With my TP2 it now longer works. I am trying to disable XT9 so I have the microsoft drop down for suggested words.
Does anyone have the setting for this? Sorry if this has been posted already, I searched around on Google and just found the technique for XT9 for models other than TP2 which don't work.
**EDIT**
Found my own answer...
Enable XT9
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e0030404]
"Ime File"="M5ImeMgr.dll"
Disable XT9
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Layouts\e0030404]
"Ime File"="compime.dll"
Works on my Hong Kong ROM and may not work with other ROMs.

will this make XT9 persistently stay on and not be forgotten every time you close down that panel (for hw keyboard)?

dazkeirle said:
will this make XT9 persistently stay on and not be forgotten every time you close down that panel (for hw keyboard)?
Click to expand...
Click to collapse
Stays on for me and it actually works with the on screen keyboard too which did not work with the Touch Pro.

so the cab that dutty put together a while ago doesnt work on the tp2?

redd214 said:
so the cab that dutty put together a while ago doesnt work on the tp2?
Click to expand...
Click to collapse
If it was made awhile ago and not for TP2 then it will not work.
Would you like it in CAB format, can whip one up really quick.

yeah that would be awesome if you could, thank you!

redd214 said:
yeah that would be awesome if you could, thank you!
Click to expand...
Click to collapse
I would make a cab but some people have said that it caused problems by the dll file name being different in their ROMs. I am using Hong Kong ROM, what ROM are you using?

My XT9 not working now since in install Studio Kuma Chinese input CAB. I have a Hong Kong TP2 English Version and i need Chinese handwriting input. But since in install the CAB. I lost the standard XT9 and I no longer can input Chinese using anyone of the standard input method.

rcbear said:
My XT9 not working now since in install Studio Kuma Chinese input CAB. I have a Hong Kong TP2 English Version and i need Chinese handwriting input. But since in install the CAB. I lost the standard XT9 and I no longer can input Chinese using anyone of the standard input method.
Click to expand...
Click to collapse
Try this cab. It will return the registry settings for XT9 and input to default.
Hope it works for you.

Thanks At0mAng. I'll have a crack at your CAB. BTW, do you have the original TP2 Chinese handwriting CAB from your device?

rcbear said:
Thanks At0mAng. I'll have a crack at your CAB. BTW, do you have the original TP2 Chinese handwriting CAB from your device?
Click to expand...
Click to collapse
Do you mean the new EZinput? I am not Asian so I never use the Asian input. I believe there is a way to enter chinese characters by hand. I can try to CAB up the EZInput from my dump and see if it works.

Swype Overlapping

So, I downloaded swype onto my WM 28011 Manila 2.5 ROM, and the problem is that when I click to open Swype, it overlaps a piece of the taskbar on the bottom of my screen. Is there any fix for this?

Bump, anyone gotta fix for this?

swype for topaz
check this out it works fine with me, initially i had issues with swype but this one was just perfect n now i have finally got swype working for my topaz
http://www.4shared.com/dir/25400354/73a6f458/Swype.html

daasguy said:
check this out it works fine with me, initially i had issues with swype but this one was just perfect n now i have finally got swype working for my topaz
http://www.4shared.com/dir/25400354/73a6f458/Swype.html
Click to expand...
Click to collapse
I got a Touch Pro (Fuze,) the resolutions for the Swype's are different. I use VGA and you use a WVGA cab.

daasguy said:
check this out it works fine with me, initially i had issues with swype but this one was just perfect n now i have finally got swype working for my topaz
http://www.4shared.com/dir/25400354/73a6f458/Swype.html
Click to expand...
Click to collapse
I am trying to get swype 3.9 working on 6.5.3 without the overlapping of the bottom task bar.
Does anybody have any information on the 4shared Fix posted above? (or any other fix for the ovelaping of Swype).
The link is unfortunately broken.
Thanks

http://forum.xda-developers.com/showpost.php?p=4471931&postcount=3286
This was a fix a long time ago for the MS keyboard in some leaked build of WM 6.5. I bet there is a similar registry key for Swype. I don't have it installed currently, but if no one else tries it out, I will sometime tomorrow. Let me know if it works.

I just had to revive this thread... any fix for this lol.

Broman400 said:
I just had to revive this thread... any fix for this lol.
Click to expand...
Click to collapse
For me this position fix works

use Utask... and Swype looks good...
hi AndrewSh...

My X1 need HTC compact and full QWERTY keyboard.

i'm use winmo 6.1..i have problem to write sms using screen keyboard coz too small..everytime need to use stylus..i really need to add my x1 with htc keyboard...where can i found it?
i saw some x1 have it , please see this video...
http://www.youtube.com/watch?v=hLz4UlKOHL0
tq for help.

if imposible...any other soft keyboard for x1??
tq

here is the best keyboard for WM : Finger keyboard
http://forum.xda-developers.com/showthread.php?t=501434
HTC keyboard only can be used in Sense ROMs.. FingerKeyb gives a full qwerty option.. there's no half qwerty or alphanumeric

you may try htcezinput with t9 compact and full qwerty,
if you dont find the thread tell me then i'll upload it

you may try htcezinput with t9 compact and full qwerty,
if you dont find the thread tell me then i'll upload it
Click to expand...
Click to collapse
can you upload the file...
tq.

duke_dreadmoore - here is the best keyboard for WM : Finger keyboard
http://forum.xda-developers.com/showthread.php?t=501434
HTC keyboard only can be used in Sense ROMs.. FingerKeyb gives a full qwerty option.. there's no half qwerty or alphanumeric
Click to expand...
Click to collapse
tq.very nice soft keyboard.....

Hey there, can u please upload the file, I have problems with small fingerboard too..
thanks a lot before..

here you are...
its quite the same like in the video but with out navigation buttons,
but since you have a D-Pad, you dont need it