Hi there, not sure if I'm in the right place, but today I changed my cracked screen with a new one. Only the new one stays black, anyone has an idea about what I'm doing wrong?
Thanks,
OmeAnne...
Related
Ok, so I didn't know that, that (from my other post) was "Insurance fraud". So I decided to fix the phone myself, Insurance cancelled. Now as you may already know, I stood on my phone. I am guessing that the Digitizer is the touch panel and the screen is a the botton displaying the image.. Once the damage was done, I quickly checked if the phone was alright so I pressed the "Unlock key" and had to swipe the unlock screen to see if the phone was working, so obviously the Digitizer is working as it did change to homescreen when I swiped the screen.
As I panicked I took the battery out, and turning the phone back on hoping it will work, It did not. Some green dots and lines started apearing. Then it stopped displaying, so a black screen after the vibration when I'm turning on the phone.
I also know that the phone is still working because when I plug it into my computer Windows 7 has that little bleep..
The glass screen is not cracked but, when you look at the screen at an angle you see the some scratches (or cracks) underneath on the AMOLED..
Now, my question is, do I need a new AMOLED or a new Digitizer?
thanks for your time!
edit; I've been looking at abit of nexus one Screens/Digitizer's, they seem cheaper, so would they work with a Desire?
Hi,
I have a HTC Desire Z, one day I pulled it out of my pocket and the screen was black with white lines. After reading that it was most likely a faulty LCD, I purchased a replacement from ebay. I installed it following the instructions in this video
watch?v=C0LJnqTlBVQ
After installing it the screen remains black. I can hear the start up music playing but the screen is black, no white lines like before. I even tried reinstalling the original lcd and the same thing, no white lines. Also after starting the phone up the front seems very warm.
Could my replacement lcd also be faulty or does the problem lie elsewhere?
Thanks in Advance
Ok, I took it apart again just to double check the lcd ribbon. It was on good, however I took it off and put it on again and now the screen works!
However the brightness is set to the lowest and even if I change it to the high setting it remains the same. Also the automatic change doesn't work either. Any Ideas?
Hi guys
I hope everyone is well
A week or 2 ago i noticed a pink line down the right hand side of my screen
ALso the bottom of the screen was slightly pink although i could see the text.
Gradually over the last couple of weeks the pink at the bottom of the screen has nearly filled the whole screen. The bottom of the screen is now turning from pink to grey.
Obviously i believe this to be a screen/LED problem
I have looked on ebay and found screens with digitizers but I am not sure if this will do the job or it needs another part with it
can someone please point me in the right direction...preferably with links
thanks in advance
adamspelman said:
Hi guys
I hope everyone is well
A week or 2 ago i noticed a pink line down the right hand side of my screen
ALso the bottom of the screen was slightly pink although i could see the text.
Gradually over the last couple of weeks the pink at the bottom of the screen has nearly filled the whole screen. The bottom of the screen is now turning from pink to grey.
Obviously i believe this to be a screen/LED problem
I have looked on ebay and found screens with digitizers but I am not sure if this will do the job or it needs another part with it
can someone please point me in the right direction...preferably with links
thanks in advance
Click to expand...
Click to collapse
Hi mate, I recently changed the screen and digitizer on my phone. If it's just the screen thats broken then you only need a screen, however you need to be VERY careful when taking out the screen from the digitizer, as if you break the connector to the digitizer then you will need to buy a new one too! Search youtube for "bravo disassembly procedure" or something along those lines, it's the official htc video.
It's actually pretty straightforward to do, and you don't need to treat it as gently as nitro glycerine either, as long as you don't use too much excess force.
Thanks
Hi mate
thanks for the reply
I have seen those videos around and got one in my favourites already
By the sound of my problem do you think i will just need a screen and digitizer or will i need more
adamspelman said:
Hi mate
thanks for the reply
I have seen those videos around and got one in my favourites already
By the sound of my problem do you think i will just need a screen and digitizer or will i need more
Click to expand...
Click to collapse
It SOUNDS like a screen issue, the digitizer shouldnt be a problem
Help
bortak said:
It SOUNDS like a screen issue, the digitizer shouldnt be a problem
Click to expand...
Click to collapse
Thanks mate
I have received my new phone and replaced it
Think i have buggered the touch screen but i am not too worried because it didnt have much glue. With the other stuff on top will that connect it or shall i use some glue on it...if so what glue
Thats not the main issue
Good thing is.,....no case means no scratches so it looks lovely.....still the problem is there though
The whole screen is like a bluey colour,.,,..cannot see anything at all
what else could it be???
please please can someone answer asap so i can get this fixed
adamspelman said:
Thanks mate
I have received my new phone and replaced it
Think i have buggered the touch screen but i am not too worried because it didnt have much glue. With the other stuff on top will that connect it or shall i use some glue on it...if so what glue
Thats not the main issue
Good thing is.,....no case means no scratches so it looks lovely.....still the problem is there though
The whole screen is like a bluey colour,.,,..cannot see anything at all
what else could it be???
please please can someone answer asap so i can get this fixed
Click to expand...
Click to collapse
Hi guys
Anyone managed to have a look at this?
anyone
sorry to post again
anyone able to comment on this? please
Hey sorry mate.. Hmm if it wasn't the screen then it must be something else... I don't want to tell you what it is for you to aimlessly keep buying stuff, because it's just not worth it. If it wasn't the screen then it could be so many other things.
hi guys. i broke my hox screen. only the touch panel broken but, yellow tint occured on screen, so i have to change whole screen. do you know a trusted seller for hox screen on ebay etc. ? thanx a lot.
Hello guys. I changed my mi5s lcd screen yesterday but i noticed that the new lcd screen came without a home/fingerprint button. It was imposible to take it out from the old/broken screen so i ordered a new one.is it easy to put it in the new screen ? Do i have to stick it with a glue?anyone did it before.
Kosfox said:
Hello guys. I changed my mi5s lcd screen yesterday but i noticed that the new lcd screen came without a home/fingerprint button. It was imposible to take it out from the old/broken screen so i ordered a new one.is it easy to put it in the new screen ? Do i have to stick it with a glue?anyone did it before.
Click to expand...
Click to collapse
I have the same issue.
I went camping, the screen accumulated moisture and got all wonky. I have to replace the screen and from what I've read, you cant use the old sensor and most of the screens don't come with a home button ~($40) whereas the ones that do are very expensive ~($100).
Let us know, you can be the "first one" on the "Internet" to make a detailed account related to the problem.
Best of luck
Anyone fix it?
i had same problems here, i really miss my fingerprint sensor