Related
Hello, I saw that someone else asked a similiar question before but they did not word the question correctly and got little help.
On my HTC EVO logic board, there's three tan "ports" (I don't know what they are actually called). One for the front camera, one for the LCD, and one for the front panel.
While walking home one day, my screen started showing a dark spot. The spot got bigger, and I decided to take apart my phone (something I'd done before a few times) and try to clean things up. I put everything back together, and the LCD would not come on. After numerous tries, I finally decided the LCD was damaged. As I went back in the phone, I saw that regardless of whether you flipped the black tab on top of the LCD tan 'port' back or forward, the cable was capable of being pulled out, e.g., it was not secure. At the time, I thought nothing of it, but now that my new LCD should be here, I'm worried.
Is my LCD not working because the 'port' is broken? If so, what can I do to repair it? (I heard it is very difficult). I'm worried, because I paid a lot to buy a new LCD and will be unable to send it back.
http://guide-images.ifixit.net/igi/ZYHLZwIIVhjilEpT.large
Also, my front panel cable never sits 'perfectly'..that is, I have to connect everything else first, and then try my best with the front panel. The tape does not stay down flat completely.
These sorts of connectors can be fixed,but there is quite a bit of skill involved. Upload a picture and I can tell you better how hard it is. What I can tell you is that you probably cant do it yourself. I base this on the fact that those who have the necesesary skils will instantly know its going to be a pain. In fact,its easy to screw it up ,and sometimes you do,even if you DO know what your doing. Since I dont want to take my phone apart,Ill need to see a picture of it before I can tell you anything more. One thing to keep in mind is that sometimes the ribbon cable CAN be pulled out anyway,and is making good contact and there is some other problem. If you have not installed the new LCD,install it and see if it all works. If so,your good to go. As a general rule,the connectors are delicate and its not a good idea to pull them out. In fact,dont disconnect them if you dont have to. They have a limited number of connect/disconects they can take and they are very easy to break.
pflatlyne said:
These sorts of connectors can be fixed,but there is quite a bit of skill involved. Upload a picture and I can tell you better how hard it is. What I can tell you is that you probably cant do it yourself. I base this on the fact that those who have the necesesary skils will instantly know its going to be a pain. In fact,its easy to screw it up ,and sometimes you do,even if you DO know what your doing. Since I dont want to take my phone apart,Ill need to see a picture of it before I can tell you anything more. One thing to keep in mind is that sometimes the ribbon cable CAN be pulled out anyway,and is making good contact and there is some other problem. If you have not installed the new LCD,install it and see if it all works. If so,your good to go. As a general rule,the connectors are delicate and its not a good idea to pull them out. In fact,dont disconnect them if you dont have to. They have a limited number of connect/disconects they can take and they are very easy to break.
Click to expand...
Click to collapse
Well, I don't really have a means of taking a quality photo except with my computer webcam but I'll try in a second. I can't really show you because there isn't much to see. The little black bar that flips up and down to 'lock' the port is ineffective; the cable can be pulled out regardless. I know I can't fix the port/connector by myself, so I'm hoping that's not the issue. You have given me a lot of hope though. The new LCD should be here by Wednesday at the latest, so I'll be able to test it then.
Does my front panel affect the LCD? Since I dropped my phone on the corner, even with a new panel it does not sit 'perfectly'. I don't think they're related though.
BluRngerGurl said:
Well, I don't really have a means of taking a quality photo except with my computer webcam but I'll try in a second. I can't really show you because there isn't much to see. The little black bar that flips up and down to 'lock' the port is ineffective; the cable can be pulled out regardless. I know I can't fix the port/connector by myself, so I'm hoping that's not the issue. You have given me a lot of hope though. The new LCD should be here by Wednesday at the latest, so I'll be able to test it then.
Does my front panel affect the LCD? Since I dropped my phone on the corner, even with a new panel it does not sit 'perfectly'. I don't think they're related though.
Click to expand...
Click to collapse
I dont think so. I bet your ok. Just dont keep playing with the connector. I know,Ive done it. I sit there messing with it,wondering,is it broken? Is it good? Then the little black peice comes off in your hand or the plastic breaks and "well its sure broken now!" Remember,that little latch does not so much hold the cable in place as hold the cable against the contacts,if its making contact,its good to go.
Hi, all. The new LCD I receieved did not work. There are very minor differences in the two; such as some type of blue gunk on the silver part of the LCD, the connector is more of a dark orange on the new one while the original is a yellow-orange, etc. Also, again, the connector does not 100% fit in the slot. It goes in, but a small corner sticks out a bit and you have to either hold it in or clip it in [which I can't, because the black clip is broken].
The only possibilities I can think of are
A] Because the little black thing is damaged, no LCD will work in it. Therefore I need a new phone.
B] The LCD does not work.
C] The LCD is the wrong size.
At this point I want to just give up and get a new phone, which is very heart-wrenching because I love my EVO and I doubt I can afford the only other phone I like, the Samsung Galaxy S II Epic Touch 4G.
Is anyone able to identify what connector is used on this phone for the LCD? I broke a pin on the connector while trying to repair a cracked screen. I would like to buy it and re-solder it on to fix the phone.
Can someone link the correct connector maybe from digikey.com?
Broken latch
I too have a problem with the connector... the plastic part that connects the ribbon cable to the main board has broken. There must be a place to buy these tiny plastic latches... does anyone know? Your assistance will be greatly appreciated!
Mac-
Hello!
I just finish to "unglued" my digitizer cable on my note 2 ,
Please, just take a look at the picture, maybe can I do something to put it back.
Look like unglued..have you any idea if that flex cable it's glued or soldered ?
Thank you very much.
Wow.. I just did the exact same thing yesterday.. same spot on the cable and everything. I did it when I was replacing the glass.. I've tried taping it back.. and now I've tried gluing it , the touch kinda works but really inconsistent and annoying. I've spent way too much time trying to fix it and think I'm just gonna sell as parts now. What did you end up doing? Any luck getting it reattached? If you were successful please let me know what you did.
tri0xinn said:
Wow.. I just did the exact same thing yesterday.. same spot on the cable and everything. I did it when I was replacing the glass.. I've tried taping it back.. and now I've tried gluing it , the touch kinda works but really inconsistent and annoying. I've spent way too much time trying to fix it and think I'm just gonna sell as parts now. What did you end up doing? Any luck getting it reattached? If you were successful please let me know what you did.
Click to expand...
Click to collapse
For me, was no way to put back this flex cable... and I think its close to impossible to make something good with this display.
I just stored that display ....for don't throw it.
Good luck!
this is a usual ribbon cable. i teared mine replacing the screen... will try to replace it and report back.
maybe it will require light smd oven soldering and that will suck big time. maybe i can just pressure it down somehow. your cases are much better, you still have the original cable and half of it is already soldered making it much easier to solder the rest.
gcbxda said:
this is a usual ribbon cable. i teared mine replacing the screen... will try to replace it and report back.
maybe it will require light smd oven soldering and that will suck big time. maybe i can just pressure it down somehow. your cases are much better, you still have the original cable and half of it is already soldered making it much easier to solder the rest.
Click to expand...
Click to collapse
I have do the exact same thing,
Is this going to work?
cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=140945664484&fromMakeTrack=true&ssPageName=VIP:watchlink:top:en
Thanks
Goathier said:
I have do the exact same thing,
Is this going to work?
cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=140945664484&fromMakeTrack=true&ssPageName=VIP:watchlink:top:en
Thanks
Click to expand...
Click to collapse
probably. i hope you haven't glued the glass already
edit, actually that one probably have that ribon cable already attached. i can only see the plug that clips on the motherboard(?)... not sure that is what you want
Goathier said:
I have do the exact same thing,
Is this going to work?
cgi.ebay.ca/ws/eBayISAPI.dll?ViewItem&item=140945664484&fromMakeTrack=true&ssPageName=VIP:watchlink:top:en
Thanks
Click to expand...
Click to collapse
thats not the same part, the part u listed on ebay is for the stylus. U can easily tell its not the same part as shown in the original post. Check out this youtube video at the 20:50 minute mark, it will show u the exact parts and u can tell. Youtube: https://www.youtube.com/watch?v=bxgZeb5QytM
Unfortunatly the part the original poster pictured is part of the digitizer and is near impossible to fix once ripped. all ive been able to find online is that ribbon cable being sold with the digitizer itself. If anyone else actually finds the part shown in the original post please do post back.
I have a huge problem, basically I was sick and tired of my black housing for the phone, so I ordered the white one from ebay. I was so happy it came that I forgot to shut down the phone, well during half way of the work, while I was trying to pry it open I remembered and turned it on and it worked I opened it a bit more open and it suddenly went black and since then everything is working except the LCD.
I have no idea whats the problem is the LCD broke or what?
Also when it shut down and me trying to reconnect the LCD flat cable to see if thats the problem I was nervous and did that which you see in the picture. Now my issue is what if I buy a new screen connect it and it doesn't work because the FPC connector?
Silthrax said:
I have a huge problem, basically I was sick and tired of my black housing for the phone, so I ordered the white one from ebay. I was so happy it came that I forgot to shut down the phone, well during half way of the work, while I was trying to pry it open I remembered and turned it on and it worked I opened it a bit more open and it suddenly went black and since then everything is working except the LCD.
I have no idea whats the problem is the LCD broke or what?
Also when it shut down and me trying to reconnect the LCD flat cable to see if thats the problem I was nervous and did that which you see in the picture. Now my issue is what if I buy a new screen connect it and it doesn't work because the FPC connector?
Click to expand...
Click to collapse
The connection pins themselves do not look damaged, on the plastic shroud. The socket should work fine.
It's a little hard to make out fine detail in the pic...take a magnifying glass to it and check for cracks or splits in the pins.
Tigerlight said:
The connection pins themselves do not look damaged, on the plastic shroud. The socket should work fine.
Click to expand...
Click to collapse
Hmm it seems like it goes one small one then longer one, its hard to see from he picture but I think two of the longer ones are missing. And what should be the problem with the LCD because that happened before I damaged the socket.
Between thank you for the fast reply.
Silthrax said:
Hmm it seems like it goes one small one then longer one, its hard to see from he picture but I think two of the longer ones are missing. And what should be the problem with the LCD because that happened before I damaged the socket.
Between thank you for the fast reply.
Click to expand...
Click to collapse
Well I don't see any missing pins, but you'll have a better view.
As for you LCD...no idea. Generally it's a good idea to turn everything off before you open electrical equipment. You could have caused a short in the process of opening it live.
Tigerlight said:
Well I don't see any missing pins, but you'll have a better view.
As for you LCD...no idea. Generally it's a good idea to turn everything off before you open electrical equipment. You could have caused a short in the process of opening it live.
Click to expand...
Click to collapse
Would that be on the motherboard or the LCD, basically should I bother repairing it or just sell it for spare parts thats my issue right now.
Silthrax said:
Would that be on the motherboard or the LCD, basically should I bother repairing it or just sell it for spare parts thats my issue right now.
Click to expand...
Click to collapse
If you try to power it on does the vibrate activate...basically does it do everything you'd expect EXCEPT the screen doesn't work or does it do nothing at all?
Tigerlight said:
If you try to power it on does the vibrate activate...basically does it do everything you'd expect EXCEPT the screen doesn't work or does it do nothing at all?
Click to expand...
Click to collapse
Like I said earlier everything works, I can still receive SMS, phone calls (I can answer them since the digitizer works), e-mails, Facebook msgs, vibrations, sound, microphone... Everything works except the LCD.
Silthrax said:
Like I said earlier everything works, I can still receive SMS, phone calls (I can answer them since the digitizer works), e-mails, Facebook msgs, vibrations, sound, microphone... Everything works except the LCD.
Click to expand...
Click to collapse
You might try replacing the LCD and hope you haven't damaged the connector. If you have, a self-repair is unlikely given its size and that of the pins.
Or you dump it and buy a new phone.
Either way it's gonna cost you money. The first is cheaper but may not work.
I think that's your only options.
Yeah I knew from the start it was gonna cost me money, but I wanted the cheapest way out
Thanks a lot for the help I think I am gonna try to fix it. Get some experience while doing it too
Silthrax said:
Yeah I knew from the start it was gonna cost me money, but I wanted the cheapest way out
Thanks a lot for the help I think I am gonna try to fix it. Get some experience while doing it too
Click to expand...
Click to collapse
Hey did you ever figure out the connector issue? Same problem
Hello guys, after screwing up my phone I'm using my tablet a lot more. So i'm experiencing some problems. The screen problems increase when i use the tablet more often, but i don't have this phantom touch problems it's actually the screen stop working. It just stays on lock screen and me unable to unlock it, i restart the tablet and still doesn't work. However the strange part is that when i hit the back of the tablet in something it immediately starts to work??? I know about the N7 touch screen issues, but i thought they were software based? But mine looks like it's hardware problem? Can you explain me and help me? Thanks.
Can somebody answer me??
yanis15 said:
Can somebody answer me??
Click to expand...
Click to collapse
If it's hardware, it's most likely, though not exclusively, the cable connections. You need to take the back cover off, and reseat them one by one. Takes a little work because there are 3 cables, one with 2 prongs. Reseat all of them if you can since you don't really know which one caused the problem.
Warranty?
Ok i saw some videos that it may be replacing the screen cables just as you said, but i have warranty. What to do? If i take it to warranty center it's most likely it will work there at the moment? It stops in random times.. What to do?
Removing the back without voiding the warranty is very simple but make sure that you will wear some sort of protective gloves and not touch any copper foil at all ( or you end up with finger prints.. ). Simply reattach the touchscreen connector cable only and you´re good to go.
yanis15 said:
Ok i saw some videos that it may be replacing the screen cables just as you said, but i have warranty. What to do? If i take it to warranty center it's most likely it will work there at the moment? It stops in random times.. What to do?
Click to expand...
Click to collapse
Thanks for the info. Actually i can fix it easly not by hitting, but just by pressing the back cover. I saw where the cables are in a video and can permanently fix it by putting something between the back and the cables to keep thwm in place. And when i press they just go in place. For now i will just press it when needed. If the problem increases i will open and reattach all cables in place. Thanks for answers.
Hi all,
I have a general hardware problem with my Samsung Galaxy Tab S4. Maybe someone here has an idea or tip for me.
I still used the factory software without any rooting or unlocking the bootloader. So everything original and up to date.
A few month ago the tablet began to restart in the middle of using it. At the beginning it happened seldom, but then more and more often. Also during the restart new restarts happened more and more often, so that it took several retries, until it started again. Now it is not usable anymore, because it is not running longer than a few seconds before the next restart if it happens to boot completely at all.
I was able to make a factory reset but this didn’t solve the problem.
My first theory is, that this could be a problem with the battery, that it is slowly dying and had more and more problems to hold the voltage. But the problem also exists when the power supply is connected. So I am not sure if this rules out the possibility, that this could be cause by the battery? Does somebody know how this is internally wired, if a broken battery could still have a negative effect when the power supply is connected?
Do you have other ideas/advices, what could be the problem or would could be helpful to do?
Thanks in advance for any help.
Best
The USB power input can't sink enough current to boot it or even run it without the battery acting as a reserve during peak usage spikes.
Replace the battery and go from there.
Thanks, then I will try this.
Vertex9999 said:
Thanks, then I will try this.
Click to expand...
Click to collapse
Hi Vertex, have you tried this already? I have pretty much the same problem and the battery was also my first intuition, but I don't know if buying a new one is worth it. Thanks!
Hi,
unfortunately I didn't had time to do it yet. I want to change the battery myself and for that I will need time and somebody to borrow me a hot air gun, because everything is glued together.
I will report, when I have done it but it will be at least a few weeks.
Alright, so I'll probably try it sooner, I'll update after replacing the battery. Also, if you haven't tried it yet, you might want to try just disconnecting the battery from the motherboard and connecting again after like 20s, I've read that it sometimes resolves this problem, but it didn't work for me. Fortunately removing the back lid of tab s4 is pretty easy, I used hairdryer, so with heatgun it should be even easier.
Thanks for the tips. I am currently on vacation but when I am back I will also try with a hairdryer.
Any additional tips for removing the back lid to somebody doing it the first time beyond what you can see in the youtube videos? How do you glue it back together?
Hi, sorry for the late reply.
I have eventually replaced the battery, and nothing changed unfortunately… I did a factory reset, etc. However I also had an issue that you didn't describe in your original post, which is that USB connection is not working, it only charges the battery, when connected to the PC while booted it's just not visible at all (tried with several cables, two computers, on windows and linux), when in download mode it kind of shows up, but it's not recognized and no drivers or any solution that I've found are working, so I don't know if it's still hardware problem something with the USB related parts or something in the system on lower level. Well, I'll be trying.
About the back lid. Beyond YT videos only thing that comes to my mind is patience. About the glue, you have few options and it depends a bit on how removing the cover goes. 1) glue stays in the more or less same condition as before removing the cover - that's how it went for me - in that case you can just reuse it, just by closing the cover and pressing it down for some time, it's probably not as strong as new but for me it worked just fine, especially if you use a book cover for the tablet there won't be a problem.
But if the glue came off, wrinkled a lot, or just doesn't stick anymore, 2) you can either use a special epoxide glue often with signature like T-7000 or T-800 but if you just look for a glue for smarphones you'll easily find it. Or 3) Buy a special sticker for this exact device which has a specific shape, it's pretty much the same thing as is used by manufacturer.