Hi, a friend have 2 pda universal from vodafone that he has flashed and killed. I don´t know what happend. pda always shows USB and v1.00. After a lots o rom updates still dead, i have JAFWM, but with or without this machine is dead.
any rom especial version?
any soft?
thanks.
1. Try to restart the device in bootloader mode(Light key, power and reset pressed together)
2. Look at the display (should say Serial and version at the bottom)
3. Disable the USB connection in Active Sync otherwise the update will crash.
4. Plug in USB Cable (Screen Should now show USB at the top)
5. Start original Upgrade from your provider or take the upgrade you want to use with the MA_UpGrade_noid.exe.
6. After Flashing restart device with both soft keys at the bottom of the screen ( Buttons with - on it) pressed.
7. When asked type 0 to erase all data.
9. Device should start normally, if it doesn't do not hesitate to ask.
device always start in bootloader mode, i flash all times without problems, but when i restart device, automatically puts on bootloader mode.
after flash, make factory settings but,after this, restart in same mode.
always, when i run update program soft MaUpgradeUt_noID, detects no rom in pocket loaded.
strange problem on 2 pda´s ?
thanks
That shouldn't be a problem. Just continue to flash the rom. There could be a problem with your bootloader and the upgrade version (AKU2) you want to use.
Maybe it's a problem with bootloader.
Try it, maybe it will help you.
http://forum.xda-developers.com/download.php?id=11414
i think same as you, only problem with ROM image, but i have flashed many roms but I can´t revive device. So i ask name of Rom tht can revive pda.
Br.
PD. how i can flash the archive attached?
The rar file mentioned above is only the bootloader you already got on your device.
In your case i would use an old AKU1 rom and to see if it works.
hi guys
i have same problem. show only boot loader mode. how to use this boot loader file. wich AKU1 file is working. my phone is MDA PRO from germany T-mobile, i wan't to update ro to English. after flashing many times, many rom no result. help me
thanks a lot
Hello Siemens Man
Which Bootloader do you have ?
It would be great if you could make an backup of your bootloader then, that i could downgrade my phone and try to unlock it.(If do not know how to make an backup, thats no problem, because i can show you how to do it)
greetz
hi man
i have in boot loader mode. show me usb v1.00 only. i don't have buck up for my phone. please tell me solution how repair my phone.
thanks a lot
Did you try to update your phone to the latest orange rom for testing yet ?
If not try it out (I know it is said to be slow, but only if all orange customizations are installed) If it runs then its ok.
Otherwise try to use the exitbl.exe mentioned somewhere in this forum, hopefully it works.
connect to mtty and issue set 14 0 and then restart the device or use exitbl utility by buzz
hi guys
thank you for reply mail. all problem solved. now good working
thanks to Buzz
are there any useful hints extrem69 ?
no usb mode
What can i do of my Qtek 9000 doesen't change from Serial to USB mode?
siemens man said:
hi guys
thank you for reply mail. all problem solved. now good working
thanks to Buzz
Click to expand...
Click to collapse
I had same problem like you, can you tell me what exactly did you do so you can repaire your phone.
I used T-mobie and didn't work after upgrade rom too, it's alway stop in boot loader screen. I tried up rom of T-mobile, Imate, Dopod but nothing to work, I don't know how to repair it, it's still can up rom normaly, nothing wrong while upgrade, it's only don't work after finish.
wooooooooooooooooooow
many thanks
i tried many ways to solve this problem
with your advuse it is working now.................
Lt.Cmdr.Ivan said:
1. Try to restart the device in bootloader mode(Light key, power and reset pressed together)
2. Look at the display (should say Serial and version at the bottom)
3. Disable the USB connection in Active Sync otherwise the update will crash.
4. Plug in USB Cable (Screen Should now show USB at the top)
5. Start original Upgrade from your provider or take the upgrade you want to use with the MA_UpGrade_noid.exe.
6. After Flashing restart device with both soft keys at the bottom of the screen ( Buttons with - on it) pressed.
7. When asked type 0 to erase all data.
9. Device should start normally, if it doesn't do not hesitate to ask.
Click to expand...
Click to collapse
HI to all! I have lost bootloader upgrading my qtek 9000 vodafone.
can i to solve problem? No bootloader menu, i have tried power+reset+lamp, power+reset+camera - herd reset with - + - reset without effect. Pse help me!!! Thanks.
I tried to ask about this in another thread but I'm going to try to be more clear on this one. I loaded my OG drivers in and put the phone in Debugging Mode and in Diag. Mode. Device manager detects 2 ports, one is for diagnostics. I then run QPST and it detects the connection but with a "?" in front of the phone description then when I open tab for connected phones its empty. I still try to open EFS and its a blank. Are there separate Diagnostics Drivers for this phone like HTC's and other phones or is the software blocking it from being read?
Here
Lokifish Marz said:
Here
Click to expand...
Click to collapse
Crap, my bad. I only posted one here because I had a similar one in Q&A but no response so I figured that "developers" would have the tech savvy to solve my issue better. I tried to edit the title on my other thread but couldn't figure out how. Please remove this thread then and tell me how to change the title of my other one.
Or, someone please PM me with a solution.....Thanks :]
Unlock efs directories/files
Ok, I installed the latest version of QPST and now I am in the EFS of my LG OG but I can't seem to be able to figure out how to unlock the directories/files in order to edit them ( similar to using the "open sesame door" method on an HTC ). Any help would be greatly appreciated. Again, feel free to PM me or Email me at "[email protected]". Thanks.
first of all i am sorry for making new thread even there are a lot of posts about LG KS20.
i got a lg ks20 working.
made in Korea
i dont know which language it had.
i searched and downloaded LGMDP software drivers and english rom.
it was my first so i did not made backup of NV2 make i was not aware and i flashed it in emergency mode instead of normal mode
now cell working ok in english but no network coz imie is 000000000023000 some like this.
now i got
LG_KS20_NV2_QCN_TOOLS1.4
but problem is i cant write nv2
my cell connect perfect in emergency mode
but when i power on it and connect cable phone power off and show insert battery.
with LGMDP i cant manually write nv2 bcoz nv2 line not occur in files list.
so if any expert can solve my problem please help me.
the main problem i have i cant connect cell in normal mode
i changed diag setting using 2676625720#
i installed windiag_open.cab using mmc coz i cannot connect to active sync
i also tried this method but not working
http://forum.xda-developers.com/showthread.php?t=656173&highlight=ks20+insert+battery
No Body to help ?
please i know there is search button
but i am confused no solution for my problem
please help me
Hi,
You must generate a new NV2 with my software and your IMEI code (see the box, invoice etc.).. Then you flash your phone in emergency mode, you do erase EFS and you selectiones the NV2.
by
http://forum.xda-developers.com/showthread.php?t=681143
http://forum.xda-developers.com/showthread.php?t=534704
but sir there is no nv2 option in download image page in my version of lgmdp
which version i should use
i tried 3 different versions
Thanks every one for their help
My problem solved.
All my problem was
i was unable to connect my cell powered on.
when i pluged cable to cell
it powered off and showing INSERT BETTRY
and in emergency mode there is no way to restore nv2 file
My
Problem solved by charging bettry with external power supply for 40 mints
may be my bettry was faulty.
now nv2 is restored and i can change any rom withouts any problem
now my cell connects with active sync and every thing is ok
i have browsed internet for 30 days
and saw a lot off users having same problem
may be it would be helpful for somebody
Thanks again experts
Hello my name is austin and im running windows 8.1 ya i know why would i want that..well its fast sooooo..any whooo i have rocket chip 3066 based tablet and im trying to get it to get into bootloader mode witch I DID but it ended up saying device discriptor error on the usb devices SOOO i found the hub it was connected to and disabled it then it made the rock chip show up on the list of devices i opened rk batch tool as a test and would you know it was green well thats not the tool i have to use to flash this kernel i have to use the regular rk andriod tool..but when i open it it says no rk andriod usb device detected...is that weird? any how i need to get this to work..someone any one? have any ideas as to why? yes iv reinstalled the drivers and tryed 17 differnt ones and the only one that works is the rk usb driver i got from rk site.
i really have no idea how to make this work..so i tryed the rk batch tool and tryed to see if i could get it to do any thing.. so i clicked the swtich button but it said this is not supported..well it was dumb for me to try sense its allready in flash mode but still...i fill like somthing is wrong.
any help? ohh im using the GAME MID tablet
(EDIT(
GOOD NEWS EVERY ONE i figured out why the other programs would not regonize it so i went into the settings .inf file and changed the usb11 thing to 1 and then it WORKED!
but when i tryed to flash the kernal and recovery img files in the tool it showed the out put but said info start run . start to test. test device failed. run failed....this is so close..i hope someoen can help me im using a kernal edited by OMA he did it just for me and said to just flash the TUVVA kernal and the rocvery img provided by him and us the correct paths I DID and the address..witch i did.. :/ i hope someone knows SOMTHING
pl
Bump
ummm
No one can help??????
excellent my friend, but in other problem could you please put the specifications device?
Hi,
How do I get into the diag mode of this phone? I googled and googled until I could search no more!!
I tried ##diag# and some other codes but none is giving me the option.
I need to be able to connect the phone to the PC and see it in DFS, CDMA, QPST. None of these see the phone usb port now.
Please help. Thank you!
Sprint Kyocera DuraXT E4277
Well, I figured it out!
After all this headache of looking for the DIAG menu on the DuraXT.. It turns out that its not needed.. all I had to do is install the drivers on PC and connect USB cable.. Select Modem on phone and DFS was able to read it.
Now I am another problem.. I need the 16 digit device password and the only thing I see on google is that its all F's (FFFFFFFFFFFFFFF) but that is not correct.
Does anyone know how to find the SPC/MSL for the DuraXT E4277? The memory is unreadable, completely locked from reading.
Mr. Q 5 said:
Well, I figured it out!
After all this headache of looking for the DIAG menu on the DuraXT.. It turns out that its not needed.. all I had to do is install the drivers on PC and connect USB cable.. Select Modem on phone and DFS was able to read it.
Now I am another problem.. I need the 16 digit device password and the only thing I see on google is that its all F's (FFFFFFFFFFFFFFF) but that is not correct.
Click to expand...
Click to collapse
thelastemperor24 said:
Does anyone know how to find the SPC/MSL for the DuraXT E4277? The memory is unreadable, completely locked from reading.
Click to expand...
Click to collapse
Unfortunately Kyocera phones do not use 16 digit passwords, only Samsungs do. If you're trying to repair the esn/imei or unlock it, don't even waste your time, there are no specialized tools available for those tasks, other than reading the user lock, nam, etc via DFS/CWS or other similar cdma tools. But you'll probably need the SPC/MSL which may be gotten from Sprint by pretending that you need the code to factory reset it through the ##786# menu. Kyocera phones have always had elusive security, including full memory lock. Just chalk it up as a "No Can Do"