hi
sorry! my english is bad!
in Artemis_Service_Manual and in page 37, i read following lines:
Diagnostic Test
to enter Main Menu/Function Test Menu:
I. Turn the device power off and "insert
Diagnostic SD card".
II. Press and hold Power + Record
button, including Reset button, and
then enter "Diagnostic mode".
what is Diagnostic SD card and how i can make it?
when i do this "Press and hold Power + Record
button, including Reset button" at first on screen appear "searching for sd card" and after it go to bootloader menu !
tnx.
any help ?
HeLLoOoOoOoOoOoOoOoOoOoOo .... is there any body ?!
i wait for your help !!! any ?!?!?!?!?!
The answer is pretty self explanatory to be honest. You'll need the diagnostic SD card which only HTC engineers have.
Related
how to hardreset load the default settings urgent need help
power + record +camera THEN reset .... Try that never reset the xda2
just restart
anyone know how
urgent need help
Read the "Microsoft Windows Mobile Version 5.0 I can share" topic. There is a method to hardreser WM2005.
WM2005 Hard Reset
WM2005 Hard Reset
Press power putton
Then press Record Button
Then Press Camera Button
Then with Stylus press Reset Button
Use the recorder button and the camera butoon to scroll and change values.
After this you will see 3 options(no backlight).
1 Kit = YES ------------------ change this to NO
2 Register Hive= No ---------should remain NO
3 Storage = No --------------change this to YES
after this press the big round button between the call and call end buttons to SAVE. Device Restart, then wait.
You have successfully hard reset your PPC.
Re: WM2005 Hard Reset
I'll explain this menu.
1. Enables the debugging mode of WM2005. I have not played with that, it needs PlatformBuilder to be installed on PC.
2. Clears the registry hives to their default values. I have not tested that, but it should work like hardreset but will keep all modified files.
3. Format the storage. This would also reset the registry because it is contained on storage. Similar to hardreset in previous OSes.
It is rather difficult to press all these buttons without someone's help.
easy
easy... :roll:
:arrow: put the xdall in the table, insert the stylus in reset sw then make your belly or your stomach or whatever to support/push it,
:arrow: left hand hold the on/off sw and record sw
:arrow: and right hand thumb pressing the camera sw and the same time hold or support the device
:arrow: then push it all and count to ten....
hahahaha...just like you are going to acrobatic position.
But i did that.
After having thoroughly read the 280 pages of the UM of my Rhodium, I've tried several times (three digits number !) to hard-reset my machine, but alas, without success.
I've tried every possible combination of ON/START/STOP buttons but none works.
I either happen to make the message "do you want to switch off your mobile" (in french, as French am I) or the menu to activate ringer/vibrator etc to appear, but never ever got the ability to hard-reset my unit.
What's wrong with me/my Rhodium ?
Thx in advance mates !
Instructions on how to hard reset are in the wiki. Don't know what these "ON/START/STOP" buttons you mentioned are. The buttons involved in making a hard reset are the Power, Call Send, and Call End keys.
Alternatively, you can go to "Clear Storage" in your settings and follow the directions on screen.
ohyeahar said:
Instructions on how to hard reset are in the wiki. Don't know what these "ON/START/STOP" buttons you mentioned are. The buttons involved in making a hard reset are the Power, Call Send, and Call End keys.
Alternatively, you can go to "Clear Storage" in your settings and follow the directions on screen.
Click to expand...
Click to collapse
on=power, start=call send and stop=call end, indeed, but it ain't working anyway !
i'll give "clear storage" a try, thanks.
Doktor.O said:
on=power, start=call send and stop=call end, indeed, but it ain't working anyway !
i'll give "clear storage" a try, thanks.
Click to expand...
Click to collapse
You do know that you need to turn off the device first? Alternatively, do a "clear storage" as mentioned above, if you still have access to your device.
michi123 said:
You do know that you need to turn off the device first? Alternatively, do a "clear storage" as mentioned above, if you still have access to your device.
Click to expand...
Click to collapse
Yes, I do know, thank you for your response, and I tried either way unsuccessfully !
I do have access to my machine but needed it to be fully reset.
"clear storage" works fine, but that does not explain me why the "three finger salute" fails...
You are keeping the SEND and END keys down whilst you turn the POWER on aren't you? then releasing only when you see the tricolour screen
I updated the wiki page the other day to make the steps a bit clearer.
Give it antoher go .
Dave
Problems with Hard Reset on a Verizon Touch Pro 2
Hi Guys,
I've had my Verizon version of the phone since the beggining of the week and I cannot make a Hard Reset work either. The combination of Send/End/Power buttons do not work, and on my Verizon version there is no "Clear Storage" item under the system tab in settings. I've watched the U-Tube clip in the Wiki, and I note that HTC's site for the Verizon variant refers to using "Clear Storage".
Looking in the Windows directory there is a Clear Storage html file but there is no ClearStorage.exe. I have extracted a ClearStorage.exe from my Tilt and inserted it into the Windows directory of the Touch but to no avail.
Does anybody have a fix for this? Could this be another "exclusion" by Verizon to stop us working with our phones?
Sorry to insist, but you have turned the device completely OFF, right? So it's not just in "stand by/screen off" power saving mode, but completely off? So that when you press the power button, the phone starts loading WM etc.
Again, sorry to insist, but I couldn't figure out any other reason for the hard reset not to work.
Don't mind you insisting because this issue is stupid. Yes I have turned the phone completely off by pressing the End button until the phone states "Your phone will be turned off. Press No to cancel.
When I attempt the Hard reset it the phone merely restarts regardless of how long I press the buttons.
All this would not be so much of an issue if "Clear Storage" was available. Short of waiting for the first cooked ROM (and therefore Hard SPL) to appear for the CDMA phones, is there any way to put that back? Obviously it requires more than copying the .exe to the windows directory. My Tilt has a 6.5 cooked ROM. Is is possible that the .exe is slightly changed in that one vs 6.1?
Other Verizon phone owners - can you confirm that the "Clear Storage" is missing?
Edited:
On my Verizon, the Clear Storage is on the System tab, under 'Memory'. Select 'Memory' and select the Clear Storage sub tab.
Taken from ppcgeeks:
FOR VERIZON TP2 ONLY (Sprint & GSM have different settings)
Soft reset
Hold down the end key till the device powers off, then hit the end key to start your phone. You can also hit the reset button under the battery cover.
Hard reset
Hold down the end key till the device powers off, then hold volume down, send and end till you see blue text. Follow hard reset prompts.
Security
Hold down the end key till the device powers off, hold vol down and end to get to security(rainbow screen).
http://forum.ppcgeeks.com/showthread.php?t=85339
hanfeitzu02 said:
Taken from ppcgeeks:
FOR VERIZON TP2 ONLY (Sprint & GSM have different settings)
Hard reset
Hold down the end key till the device powers off, then hold volume down, send and end till you see blue text. Follow hard reset prompts.
http://forum.ppcgeeks.com/showthread.php?t=85339
Click to expand...
Click to collapse
I just confirmed that this works on a Verizon phone. I got the hard reset prompt with this key sequence.
For Verizon users that want to do the clear storage through the OS, it's located under Memory in Settings on the Clear Storage Tab.
Settings -> All Settings -> Memory -> Clear Storage
Happy formatting :-D
Thanks everyone
Thanks everyone for resolving this.
This is what HTC Touch Pro2 (Verizon) site says under FAQ "General & Others":
"Q. What does a Hard Reset do and how is it performed?
A hard reset removes all information from your device and returns it to a state just like it has never been used before. All contacts, messages, emails, 3rd party applications, etc. will need to be reinstalled after performing a hard reset. To perform a hard reset, navigate to Start > Settings > All Settings > System (tab) > Clear Storage. Follow the on-screen prompts to complete. This process will take 5-10 minutes".
Clearly no reference to being under the Memory Icon. The link is:
http://www.htc.com/us/faqs.aspx?p_id=294&cat=90&id=110490&f=t
Could we ask the moderator to arrange for the Wiki to be updated for the CDMA vcersions?
I have a Verizon TP2. Clear Storage on my phone is located at Settings/Memory and then the Clear Storage Tab. It asks you to enter a number to reset your phone and restore Verizon default settings.
Edit: Bah, guess I didnt see the second page )
Thought I would share this with you all after spending two days trying to unlock my wifes phone!
Before you peform this unlock you must remove the sim card and sd card or it will not reset!
With the phone turned of, press and hold the VOLUME DOWN button, and then briefy press the POWER button.
Wait for the screen with the 3 Android images to appear, and then release the VOLUME DOWN button.
Press VOLUME DOWN to select CLEAR STORAGE, and then press POWER.
When asked to confirm, press VOLUME UP
Restore settings and contacts from the sd card and you're away!
i just had to wait like 30sec to try the pattern again after too many goes. i think.
i must admit tho, i was very, very drunk.
This was work for me:
Before you peform this unlock you must remove the sim card and sd card or it will not reset!
With the phone turned of, press and hold the VOLUME DOWN button, and then briefy press the POWER button.
Wait for the screen with the 3 Android images to appear, and then release the VOLUME DOWN button
Press home key - after a short wait you will see a screen with a Warning triangle and a phone picture
Press Home key and Power on key together- you will see three options
reboot
apply sdcard:update.zip
factory reset
Select factory resset with track ball and click as required.
Hope that helps someone.
You Don't Have To Flash...
Try this:
It was all about this "Two-Step Verification" security of google!
I tried everything... and I mean EVERYTHING (except flashing my XooM), but at the edge of giving up, I signed into my google account and issued an "Application Specific Password" for Xoom from my Google account.
I used my [email protected] with that Application Specific Password and it worked. (do not enter spaces in the password)
Let me know if it worked
Savalan
thanx
took 2 mins to complete cheers man
Thankfull
robbie.k said:
Thought I would share this with you all after spending two days trying to unlock my wifes phone!
Before you peform this unlock you must remove the sim card and sd card or it will not reset!
With the phone turned of, press and hold the VOLUME DOWN button, and then briefy press the POWER button.
Wait for the screen with the 3 Android images to appear, and then release the VOLUME DOWN button.
Press VOLUME DOWN to select CLEAR STORAGE, and then press POWER.
When asked to confirm, press VOLUME UP
Restore settings and contacts from the sd card and you're away!
Click to expand...
Click to collapse
thanks bro it works well but apps removed
Fantastic Advice, Works a Dream!
The following worked a dream saved me hours of time trying myself and tonnes of money in a mobile/cellphone store getting it unlocked you're a genius Robbie.k I cant thank you enough. Phil (TippyTop)
robbie.k said:
Thought I would share this with you all after spending two days trying to unlock my wifes phone!
Before you perform this unlock you must remove the sim card and sd card or it will not reset!
1, With the phone turned of, press and hold the VOLUME DOWN button, and then briefly press the POWER button.
2, Wait for the screen with the 3 Android images to appear, ONLY then release the VOLUME DOWN button.
3, Press VOLUME DOWN twice to select "CLEAR STORAGE", and then press the POWER button..
4, When asked to "CONFIRM", press VOLUME UP
5, Finally "REPLACE" the SD Card and SIM Card to restore settings and contacts and you're away!
Click to expand...
Click to collapse
unlocking
robbie.k said:
Thought I would share this with you all after spending two days trying to unlock my wifes phone!
Before you peform this unlock you must remove the sim card and sd card or it will not reset!
With the phone turned of, press and hold the VOLUME DOWN button, and then briefy press the POWER button.
Wait for the screen with the 3 Android images to appear, and then release the VOLUME DOWN button.
Press VOLUME DOWN to select CLEAR STORAGE, and then press POWER.
When asked to confirm, press VOLUME UP
Restore settings and contacts from the sd card and you're away!
Click to expand...
Click to collapse
thanks for providing this information
if its on fastboot then
uhm... wasn't the clear storage option designed to literally wipe everything except bootloader?
Last time i used it i had a hard time figuring out how to use fastboot to get a working recovery to finally get back a rom on my device. The desire was my first android phone and i was completely new to that stuff
UNLOCKING
Those unlock procedures does not work with a motorola droid razr 4G LTE
Hello guys
I have wildfire with android 2.2.1, these day touch for my phone is not working properly.
* it automatically dials random number in call history
* Touch turns so hard to access (some time)
* Touch wont work at few areas on screen.
* Touch not at all working some times, (if i off the screen and turn on the screen back, then it MAY works but only some times) as a result I cant disconnect any on going calls or incoming calls
* Home Button forgot to do its work some times, if I press HOME button it will work as a selection key.
* Notification screen struck up at the middle or somewhere, not able to drag down the lock screen up or down.
uffff... there are some other issues with my WF.
I have did a factory restore and formated my Memory Card. but it still continues.
can someone let me know what can I do before taking it servicing center.
Have you tried wiping it from the bootloader?
I dont know how to do it...
can u let me know ?
Turn the phone off
To get into HBOOT press and hold volume up and power
And then I think you need to press clear storage.
nejc121 said:
Turn the phone off
To get into HBOOT press and hold volume up and power
And then I think you need to press clear storage.
Click to expand...
Click to collapse
Yes, those instructions are correct, I have did it. Its better as of now. I'll monitor it for more hours (24+) and report back the status for your tweak.
Thanks nejc212
nejc121 said:
Turn the phone off
To get into HBOOT press and hold volume up and power
And then I think you need to press clear storage.
Click to expand...
Click to collapse
To get into hboot, switch off the device and hold the vol down + power button.
There u can clear storage (=factory reset).
-----------------------------------------------------------------------------------------------------------------------------------------------------------
To OP:
Do one thing. Remove the memory card, and format the phone. Donot insert the memory card or connect to any internet networks. Use the phone for a while like this. If u feel it is OK, then ur phone is OK.
I have this stereo with android but by mistake i change the screen resolution and now i cant use it because the buttons are in diferent possitions
I read the forum and the possible solution its make a factory reset in by the recovery mode but when i press rest and power button it just send me to a screen with the text "update start" and scan my sd card...so i belive im doing something wrong.
There is another way to enter in recovery mode on this model?
Thanks.
Zitual said:
I have this stereo with android but by mistake i change the screen resolution and now i cant use it because the buttons are in diferent possitions
I read the forum and the possible solution its make a factory reset in by the recovery mode but when i press rest and power button it just send me to a screen with the text "update start" and scan my sd card...so i belive im doing something wrong.
There is another way to enter in recovery mode on this model?
Thanks.
Click to expand...
Click to collapse
Me tool, help!
if you modify system files you need update system from (update.img) the reset (factory/data) Does not change anything ,to go to recovery on the main screen (launcher) hold long press for power button about 9 second and press the button again