Develop Bugs

Need help with CDMA Work shop to get msl

Msl reader isnt working for me gives me a error. I put it on modem for both. have dev mode disabled. I run cdma workshop connect to port 2 hit read spc an get a error "Phone ask for SPC. SPC (6 digits) is required. Check "security" tab - "SPC" section."
I really need my MSL to fix my mms and Update my prl because i get a error everytime i try to.
Idk if this is info thats needed but i am rooted 2.2 rom
Am i supposed to enter a SPC before hand... lol or am i just missing something.
Edit: I also have the samsung drivers installed and am using the same cable i rooted with last night. The error i get with MSL reader is "ERROR: /dev/smd0 does not exist. This phone is not compatible."

I'm guessing you already tried this
gokuman56 said:
EDIT: Easier Way to get MSL. Okay so you have to download connectbot from the Market
1. Open ConnectBot
2. Agree Next Next Yada Yada
3. Press SSH and select Local
4. type in whatever you want by local and press enter
5. ok once you see a black screen and to the left a cash sign, type in "getprop" without the quotes
6. You should see a lot of words, scroll up all the way at the top.
7. Near the middle of the screen until you see [ril.MSL]
8. It will be 6 digits and that's your MSL
Click to expand...
Click to collapse
Are you trying to push a new PRL to the phone?
look here

Goto security, then send the default samsung password at the bottom left corner..
Then top right of the the tab click read spc.. the spc is the msl
Sent from my SPH-D700 using XDA App

Send the defualt password? just leave it on the toshiba or select a specific one? also just tried the connectbot way it gave me [ril.msl]: [000000] which IDK if thats right :\

lgevo said:
Send the defualt password? just leave it on the toshiba or select a specific one? also just tried the connectbot way it gave me [ril.msl]: [000000] which IDK if thats right :\
Click to expand...
Click to collapse
Doubtful but not impossible
Try this then see if it works
excerpt from 4g signal mod
1. Dial ##3282#
2. It will open a menu, click WiMAX and enter MSL. Note: 4G radio must be on.
3. Go to extensions and Hold EntryRX and Write Extension
4. Change the Value from -89 to -110 (The Lower the weaker the signal can be for the phone to connect.)
5. Change EntryCINR to 0004
just get to step 2 and see of it accepts your MSL

Lol wow it did thanks guys!

[Q] Flash help please

I had my Epic touch flashed to Boost, but my MSID is 0000000000 instead of my number, which is giving me error 67 and no data connection. When I go into the menu using the MSL to fix it, it won't take. I select the edit screen, and it has a box at the bottom which says "touch here". I do, then the key pad comes up and I type the number in, but it won't delete the "touch here" characters, and then when I go out and click done and it reboots, theres still no data, and I go back in the the MSID is back to all 0s.
I literally got this phone yesterday and I'm not sure if there's a problem with the flash or if its user error on my part not knowing how to edit my MSID.
Thanks for any help you guys can offer.

I believe you can edit the msid from qpst build 323. I personally use cdma workshop tho.
Sent from my BAD A$$ EPIC TOUCH 4G

I tried finding CDMA workshop, but I couldn't find a free copy. I didn't want to spend $200 just to fix my MSID.
I will try QPST though.
Thanks, will let you know

I did not see anywhere to enter my MSID in CDMA or QPST, but that is most likely user error, I havent used those programs much.
UPDATE: I did get the MSID changed and it saved, but it is still giving Error 67: Data username/password.
Anyone have any ideas how to change this, or should I just reflash it?

Please help with enterting MSL..nothing happens.

Ok folks,when I go into the dialer settings and click edit,enter my MSL and press "ok" nothing happens, what would be the problem? i know it's 000000

How do you know it's 000000? How did you get your number? You're putting ##3282# in the dialer, correct?

How can change MSL to 000000 Sprint V4.3

How can change MSL to 000000 Sprint V4.3
i have MSL code ,but need to change it to 000000
old method with V412 not work
please help

MSL utility
Jxt. said:
How did you get your code?
Click to expand...
Click to collapse
I used this App, it worked for me
MSL utility

You can use CDMA Workshop 2.7.
1. Go to [Security] tab.
2. Type 01F2030F5F678FF9 or 2012112120131219 in [Password (16 Digits)] and press Send.
3. Read the actual SPC.
4. Write 000000 and press SPC and Write.
Done.

good job
done:good:
done
thanks:highfive:

t
angelglz said:
You can use CDMA Workshop 2.7.
1. Go to [Security] tab.
2. Type 01F2030F5F678FF9 or 2012112120131219 in [Password (16 Digits)] and press Send.
3. Read the actual SPC.
4. Write 000000 and press SPC and Write.
Done.
Click to expand...
Click to collapse
please explain more. i have downloaded it but the "2" is not understandable by me
update
i understand the number 2 but "Read the actual SPC." is the one giving me problem , though i am using 3.7 verison and i am using sprint s4.
what will i do?

NEED YOUR MSL/SPC number???

https://forum.xda-developers.com/galaxy-j7/themes/msl-t3628774
GOTO MY NEW THREAD TO GET YOUR MSL CODE NOW! NOTHING ELSE WORK FOR ME TILL I FIGUARED THIS ONE OUT!!!!!!!!!!!! DONT WASTE A SECOND MORE AND VISIT MY NEW THREAD: NEW WSY TO GET YOUR MSL CODE!!!!!
https://forum.xda-developers.com/galaxy-j7/themes/msl-t3628774
THIS SPCUtility.apk was the only app that gave me a MSL/SPC number.
I spent days trying to get my MSL number to edit my ##DATA# (##3283#) menu to get my hotspot to work. I tried sooo many apps and read guide after guide to get my MSL number and nothing was working till now. Download attached SPCUtiliy.apk. Once it downloads to your phone go ahead and install it. Once its installed, In the app menu you will see a icon that is a lock and says MSL Utility. Thats the APK you need to run. Select the app and HIT the Read SPC button. You may want to write down your MSL/SPC number and keep it in a safe place. You need that code to ##3282# on the dial pad and select EDIT. Now you will be able to enter the code and hit OK. Now you can edit the info you need too. I dont suggest playing around at all with these options in these menus inless you know what your doing. It works great!!!!! I highly recommend this SPCUtility.apk to anyone that has been unable to get their MSL number.
THANK YOU EVERYONE HERE AT XDA and its members.
CARRIER: BOOST MOBILE
MODEL: SPH-L710T
BASEBAND: NF4 (4.4.2)
STOCK ROM - Rooted w/ Philz Recovery

Thanks for this! Sprint has a new policy on MSL, they will just give it to you if you call and ask.
Cheers!

This still works like a charm.

error
when i open MSL UTILITY it says " Result : File wasnot found on remote server " and one more question ; does this app requires root ?

https://forum.xda-developers.com/galaxy-j7/themes/msl-t3628774

bimaladh0 said:
when i open MSL UTILITY it says " Result : File wasnot found on remote server " and one more question ; does this app requires root ?
Click to expand...
Click to collapse
https://forum.xda-developers.com/galaxy-j7/themes/msl-t3628774