Does anyone know if/where I can get a replacement LCD+touch panel for the XDA IIs cheapish?
I've found a few places, but at $300-$400 (Australian) it seems cheaper to buy a new phone!
Why do I need this? Well, I kind of ran over my phone and the screen broke.
Everything else functions fine (I used the remote view powertoy to check it all)... I hoped to use the screen out of the CDMA model I also have here spare (CDMA has been turned off in Australia), but it's got the other Sony type screen instead (damn it!).
If I can't get something under about $150, I'll buy a new phone anyway. But I've got the car holder wired into a GPS and all that so I want to keep the blue angel running.
http://attr-search.ebay.com/search/...trt=1&ftrv=1&saprclo=&saprchi=&fsop=32&fsoo=2
I bought this item from this seller:
http://cgi.ebay.com/LCD-FOR-O2-XDA-...ryZ20336QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
I did check ebay. Only the touch sensor parts showed up when I searched from ebay Australia... How weird.
I've bought a Trinity now, but I'll look into repairing the BlueAngel still... I've grown attached to it
I have for sale a Blue Angel branded as T-Mobile MDA. See my post on the Blue Angel Accessory forum. I am in Canada but can ship anywhere.
$130. includes unit, battery, dual serial / usb cable, car charger. It is unlocked and everything is in good working order EXCEPT bluetooth. BT doesn't work.
Related
SO can most IPAQ accessories be butchered to work with an XDA/XDA II by just rewiring the connector? I ask becuase I would like to purchase a targus stowaway keyboard and use it with an MDA. Also, could a compaq expansion jacket (PCMCIA) be modiefied to work with an XDA/XDA II. Just make the required rewiring, and a custom jacket? Would anyone be interested in such a device, if it were made available? Thanks!
well the xda2 have backpack connection options so it's pretty mush just a question if the same pins are in the ipaq jackets and the xda2 bakcpack connections if not it's not going to happen if so a crossover conevter would be possible but since it would add to size of the device which many people worry about and if it dident have a all that great market notbody would spend the coins on developing it
I have seen cables sold that convert some ipaq add ons for xda use, I am not sure about the pcmcia add on as the xda would also need driver support.
I'd be interested in a device which fits to the O2 back pack and allows the Back Pack to be charged stand alone instead of having to connect it to the XDA II
I ask becuase I would like to purchase a targus stowaway keyboard and use it with an MDA.
Click to expand...
Click to collapse
http://www.thinkoutside.com/ already make a keyboard for XDA1/2 & MDA1/2 - you don't need to hack an iPaq one - although they don't seem to mention it on their website. The part number is PH10A, PH10B if you want to order one.
In the UK they sell for GBP70 - I bought one two weeks ago for my XDA2, and it's great.
Charger
I have a spare Ipaq charger...
I do understand that the XDAII dongle (the final piece that plugs directly to the device) is specific... but, can I plug the Ipaq charger to the cradle with no problems?
Thanks!
Chris
I have a spare Ipaq charger...
I do understand that the XDA II dongle (the final piece that plugs directly to the device) is specific... but, can I plug the Ipaq charger to the cradle with no problems?
Thanks!
Chris
Click to expand...
Click to collapse
Yes thats exactly what I have done.
Cheers
JustinP
I was thinking more of a "base station" or dock. A butchared docking cradle with pcmcia USB for ethernet/keyboard, HD, etc.... My next question, is could you just use the compaq driver; copy from an IPAQ to an XDA/XDAII???? Thanks.
interestingfellow said:
I ask becuase I would like to purchase a targus stowaway keyboard and use it with an MDA.
Click to expand...
Click to collapse
Hello,
I am warning you - dont buy Targus keyboards !
Almost 2 months ago I undertook a great hassle to get their IRDA keyboard PA870E. I did everything according to the manual and the thing doesnt work. I called the helpline, told them everything, waited 2 weeks - nothing. I sent some reminders and finally after 1 month !! I got a reply saying "Another device using Infrared device may be interfering with the IR keyboard". What an idiots - this is the first thing they write in the troubleshooting section of their manual ! Of course this is NOT the problem.
So I am stuck with keyboard for more than 100 usd which doesnt work I dont know what to do with it. I hope you understand my frustration.
Try anything else, but beware of Targus, the troubles are not wort it.
Regards,
Petr
Czech Republic
Sure! The TARGUS Keyboard don't work ant way.
Thankfully, in the shop where I bought it they returned the money to me.
BELKIN's keyboard, also of infrared, works perfectly, always and when we do not try to write under direct intense light-
I actually just baugt my first MDA I off of ebay. NOt a bad deal. I got an AL case, and the unit includes the standard accessories plus 3 extra (extra) stuluses, screen protectors, keyboard, extra belt clips, leather case, blah, blah, blah.... but it also includes a targus keyboard. I'll mess around and try to make it work. We'll see, and I'll let you know.
PS. I don't like non verified connections. IR is just to sketchy for me.
Thanks guys.
IT"S A FRIGGIN IR KEYBOARD!!!!! I can't really complain though... I got
MDA I
Dock
Home charger
Charger adapter
MiniSync Cable
MiniSync Car adapter
OEM sync cable
two swivel belt clips
two leather cases (tmo and krussel)
Pocket PC for Dummies
All origional manuals
Origional Box
6 Sylie (stylusses?)
5 Screen Protectors
OEM Headset
Targus IR Keyboard ( :roll: )
For $263 delivered
On top of that, the unit had only been used for 22 hrs of talking, had 1 very little scratch on the case front, and the antenna had a little scuffage on one corner. I feel bad that the dude let go of it for 250. He also included the original recipt for the unit only. He paid $427 just over a year ago.
FYI I already had a SIPIX A6 printer for my laptop, which works fantastik with my MDA.
Hi. I'm selling my XDA EXEC soon so i can buy a smaller pocket PC. I really like the look of the Artemis/Orbit but i can't decide which one to get. I was all set to buy the the Orbit but now after seeing a couple of YouTube vids i'm starting to change my mind. To me the Artemis looks a bit smaller but i can't really tell, any suggestions?
Also as i said previously i'm getting rid of my EXEC, if anybody wants it here is the description:
6 month old XDA EXEC which is in great condition and has had a screen protector on it from day one. Also i'm throwing in my Bluetooth GPS box with it's wall charger and car charger. Also i have a in car holder for the EXEC as well. I'm also including a 2GB SD card with the phone!
Exec has TOMTOM installed on it as well as some games (virtual pool and monkey islands games etc). Also got a stylus with a pen in it!!!
The ROM is a bit on the old side so i can upgrade it before sending it out or leave it as is.
£300 Or nearest offer.
I accept PAYPAL and if u wanna check my ebay account it's called shun_di12 (100% positive and 100 feedback!!)
Shun said:
Hi. I'm selling my XDA EXEC soon so i can buy a smaller pocket PC. I really like the look of the Artemis/Orbit but i can't decide which one to get. I was all set to buy the the Orbit but now after seeing a couple of YouTube vids i'm starting to change my mind. To me the Artemis looks a bit smaller but i can't really tell, any suggestions?
Click to expand...
Click to collapse
The P3300 and Orbit are the same size according to the official specs for both (H 108, W 58, D 16.8).
We had the Artemis, Orbit and MDA Compact-III together earlier today, they are all the same size, the different colour gives the illusion of differing size but they are the same.
The screen size is small (well compared to an Exec) - but you can carry the Artemis and MDA in the same shirt pocket and combined they weigh less than my Exec, the screen resolution and contrast on the HTC units is very good, although in the car you can get quite a mirror effect from it under certain lighting conditions, you can reduce this through the use of the screen protection film to some extent, very nice devices though.
Big plus point with the P3300 Artemis you get the pre-installed TomTom Navigator software (correct version for the device), a car decent car charger (although I would prefer the un-coiled style) and a good quality car holder/ mount that will tilt/ Swivel - Mike
Thanks for the replies guys. I went into the T-mobile and O2 stores today to have a proper look. I've decided to get the Artemis/P3300 version, quick question though is the only difference between the MDA compact III and P3300 the logo? On ebay.co.uk there aren't any HTC models at the moment, only T-mobile ones!
No the T-Mobile unit doesn't have WiFi on board and it isn't supplied with Pocket MSN, car charger, holder etc - if you don't need the WiFi then its a good bit of kit - Mike
Thanks for the heads up mike. I almost bought a compact iii recently. Having WiFi would be nice as i'm used to having it on my EXEC. I'm thinking about importing one from America as there seems to be loads of HTC ones over there. If I import one will it be alright to use over here (assuming it's unlocked) on the T-mobile UK network? And am i right in thinking i would have to buy an english AC adaptor?
Hi there - I'm new to the forum.
I own an Orange SPV M1500 which I think is what you'd term a Himalaya here.
My partner bought me a great new car kit which has the typical thin xda connector port in it, but now the phone is behaving badly. The screen is wonky in several places and is not responding to taps.
My dilemma is this - Orange do not provide these phones any more and they don't provide phones with the same port connector on the bottom either.
So I either have to get rid of the cradle or somehow get another phone with this type of connector.
Does anyone know the current list of phones with this kind of connector? Or where I might be able to get hold of a replacement?
Thanks in advance.
I'm not too sure, but with most car kits you can buy replacement cradles, which i believe are relatively cheap compared to replacing the whole of the car kit, what car kit is it? perhaps a quick google search along the lines of replacement cradles might turn up something
Due to an upgrade to a Kaiser, I have the following for sale:
TWO O2 Branded XDA IIs - One complete, one lacks stylus - Both are UNLOCKED.
One, my spare second one - the battery *may* be faulty. The reason I have two is that I had issues with it rebooting when i first got it, O2 sent a replacement and neglected to send a return bag . It ended up that it seemed to be the battery, so I used the original handset but the replacement battery, and I slung the replacement handset and original batt in a drawer. After rooting it out of the drawer (where it had lain for a couple of years) the battery seems to work fine and power was still over 84%. I will run it some to check. Maybe I was just being a noob or the backup battery hadn't charged.
Both handsets have some minor wear on the corners but otherwise are fine. No loose sliders etc. The rubber cap over the headphone socket on the main one is starting to split.
Also, there is a GlobalSat BT-338 SirfStar III Bluetooth GPS unit. I should have the wall charger lying around somewhere lol, I never used it though, I always used the car charger (Which I definately have and is included). A really great unit.
Also, there is a windscreen sucker mount for the XDA. Just a cheapo halfords one, but it fits perfectly and doesn't obstruct power or headphone sockets.
Also included is a retracting mini-sync cable - USB one end, custom XDA connector the other. Get a car lighter -> USB adapter (No! You can't have mine!) and leave that in your car, then you can use the mini sync you keep in your pocket with any PC or in your car to charge or transfer files.
Also included is a 1GB SD card. It is Integral branded card, it shows no speed but it seems to have enough bandwidth to play DivX off the card
Also included are two cradles - one for work, one for home
There should be two holsters, but I mislaid one the other day, I am sure it will turn up lol.
Would anyone be interested in the job lot? May split the 2nd phone off for a spares sale, but would rather sell the lot as one.
I can provide pics, I will need to bring the 2nd cradle from work, and see if I can find the missing holster / GPS wall charger first...
I live in the UK, but I suppose I would consider sending elswhere in europe. Would be unwilling to send to Nigeria even if were is for £10,000
Offers please
I think you will get your best deaL on on ebay here.
I suggest you list them separately
Might be interested in bidding on the spare one...
hardingt0110
Hi all,
I have a Universal on which the screen stopped working. I actually think the screen itself is fine, but that the connecting cable(s?) is damaged.
Using MyMobiler I can "see" the Universal's display on my laptop, so I know the rest of it is fine.
As a result, I'm looking for a dead Universal (with a working screen!) that's now unwanted so I can repair mine. Alternatively, if anybody can reccommend a CHEAP but GOOD repair service in the UK.
Many thanks in advance!
Hi, just PM'ed you, if you r interested
Having partially opened the thing, I can see the coaxial cable is damaged and this is the only part I need replacing.
If anybody has a totally dead Universal, even with a smashed screen I'd be very interested!
Carphone warehouse....
NanoRuler said:
Having partially opened the thing, I can see the coaxial cable is damaged and this is the only part I need replacing.
If anybody has a totally dead Universal, even with a smashed screen I'd be very interested!
Click to expand...
Click to collapse
Why not take it to the Carphone warehouse I took mine there when the screen was damaged and it only cost me £35 to repair... Alternatively buy a new coaxial cable off ebay should be able to find loads from Hong Kong etc.